My husband passed away almost 4 yrs ago. He was a real clutterbug and left his workshop in such disarray, that every time I went out to work in there I became overwhelmed. I didn’t know where or how to start organizing the shop until I started watching your channel. Thank you, you’ve broken the tip of my iceberg.
First of all Maria. So sorry to hear about your husband. Secondly I really appreciate you reaching out and saying since kind words about us here. I hope you’re able to get his space organized once again. And again thank you so much God bless
I came here through Stumpy. Love your positive outlook 👍 I just turned 60 last week, and started woodworking a few weeks ago, so I am brand new. I hope I can learn from you as well. Steve Ramsey was my first “teacher” and I am now addicted to many more channels. Good luck with your channel and your family. They are so lucky to have you as a carer. Best wishes from a young at heart female in Germany 🙋♀️
@@rollotomasislawyer34057th grade appearance aside. is it really a waste considering you're here and commenting about it, thus adding to his views and increasing his portion of ad revenue.
20 yr carpenter from metro Detroit MI here. Love your enthusiasm and ideas! I'm too busy working in the field to set up my garage for finish work. One day soon hopefully. I'll be "barrowing" your tips and ideas. Thanks
I'm going to start installing a cleat wall on my new shop wall tomorrow morning. I was browsing videos to gather ideas and find the do's and don'ts before I begin. This was the last video I needed to watch and I am glad I saw it before I started. The parallel cleat idea eliminates steps when cutting the cleats and, as you said, adds functionality without a down side. Thanks for sharing.
How is it that so many Americans can't figure out the difference between 'due' and 'do'? They don't mean the same thing. Heck, they're not even pronounced the same. Or aren't supposed to be, at any rate.
Add cleats to a storage trailer and you can easily set up a mobile workshop without having to duplicate all of your tools, supplies, and storage containers. You could probably create a work bench that hooks into the French cleat system and has foldable legs. This also frees up that storage trailer for other uses; moving, transporting big toys, camper set up….
One idea I have seen and like is to put a small french cleat around the edge of your workbench. Then you can move small parts bins with the cleat and hang them on the side of your bench so it's convenient and not taking up space on your workbench.
Love the video, something that I use the french cleats for is securing my sky workstations to the wall. I have a single car garage with taller ceiling due to being unfinished and exposing the roof rafters, but I still want to be able to park in the garage, and having workbenches and places to put all my woodworking stations was not viable on the ground, because typically you build a workbench or station to sit on the ground, but my ground space is off-limits when my car is parked in the garage. So I built smaller standalone stations that my equipment is mounted to IE sander, router, grinder, and such.. and instead of building them to sit on the ground, I use multiple french cleats on them and have them on a cable pully system that stores them up in the ceiling corners of my garage out of the way when I need one of them, I lower it via the cable assigned to it, then as it's lowered down I attach it to the wall on the french cleats so I can use it. When I am done I lift them back up and out of the way.
We're looking to build a new house soon and I am planning on doing French cleats in the pantry. This will be perfect to add even more modularity and functionality.
Good idea. In the professional millwork world, french cleats are done a little differently, they're rabetted cleats instead, which I found is for good reason. If you're hanging wall panels that need to sit side by side and line up with millimeter precision, a diagonal cleat like this will sometimes cause issues. If the wall isn't straight, the panel will tend to ride higher on the cleat and not sit tight to the wall or flat down to the bottom, the rabetted cleat gives reassurance here, either it doesn't go on at all, or it sinks down tight to a reliable height. It's a special case of course, this diagonal cleat is definitely faster and easier to make and will do a great job in regular circumstances.
I didn't want to sound so negative, I like your videos. I'm just making my own F.C. system now, and as I live in an apartment and don't have space nor money for a table saw (and it wouldn't be popular with the neighbors either), I have found a very cheap and easy solution. I can buy very cheap length of triangular wood, meant for filling edges of roof constructions I think. They are simply cheap roughly planed 2"×2" fir cut diagonally. I plane the cut side (quite raw) reasonably smooth, then turn it over and plane the 90° outer corner down until I have a flat side about 20 mm wide, giving a trapeze cross-section. I don't plan on hanging anything really heavy on them, so although this is cheap and maybe not as strong as plywood, it will work fine. I haven't thought of a way to use the downward edge yet, but I'm sure I will.
I thought everyone knew that, I have even seen people make fun of that as the lazy way of avoiding drilling pilot holes. I can't tell you how many times I have done that using drywall screws.
I took a look at Pete’s video on these. And the advantage he points out is being able to slip tool holders below other tool holders that would be in the way. But that still only works if the tools hold doesn’t stick out where it would block inserting or removing the tool holder below. Some of his tool holders in his video, you can’t put a tool holder below without still removing the one above. In your case, you are creating a cleat on a cleat, to add a tool holder to an existing one. Good job.
Do you have any photos or vids of how you set them up? I'm planning my garage cleats and I'm trying to decide on the distance between the cleats. 12", 6", etc.
I love French cleats. I'm going to make my own tool wall and I will be using this new cleat because I'll be adding, and adding, and shuffling, and adding ...
While the two 45 degree bevels make stacking possible like you've shown, I think a bigger benefit was missed. Having the cleat on the wall have a 45 bevel on the top and bottom means that the two cleats can be closer together. The 45 on the bottom of the wall cleat coupled with the top 45 on the storage device means they can slip together and apart more easily. This is very helpful if making many small part holders for things like screws or loose tenons.
@@jonathangaliano2617 This channels most recent French cleat video demonstrates this very well. Instead of having the 45 degree bevel only on the top edge and the bottom be a 90, both the top and bottom are cut at 45. In the latest video, you'll be able to see how close the two cleats are together. Hope this helps.
I'm a cabinetmaker in New Zealand 🇳🇿 and I've been using this "new" idea since about 1996. Have several cordless drills with the spare batteries on one cleated shelf and the charger on another one above. And all I do is cut some strips of whatever is lying around to 75 mm and then cut the 45 on one edge. Can't be arsed working out blade widths etc and I'm using a Casedai KS 30 dimension saw WITHOUT a sacrificial fence.Good idea but it's already out there.
That is amazing! I'm getting ready to build my french cleat system and will definitely be frequently visiting your channel for awesome ideas! Thank you! ❤️
Very cool new idea! I haven’t replied your posts in a while now. Sometimes I’m just not in the mood for new ideas but I regularly download videos & save them. Sometime later I come back when I have more time & watch. I have two walls of my shop for French cleats including some nice cherry cabinets purchased in a yard sale, before I ever had my shop built. I’m taking some of my tool holders down & redoing them to be more versatile. Thanks for this idea & all the great videos you’ve done.
I love the concept of your more universal cleat setup, especially the cleat on cleat possibilities. I don't have much free wall space, as I have tons of cabinets (repurposed kitchen uppers, with doors), but your concept makes great use of the end caps and even using the doors themselves for 'tool wall' storage. The trash bag holder with the bottom that sits flat on a bench gives me many ideas for the 'portable' tool holders, as that concept has more utility than the 'rearrangeablity' (is that a word?). I am thinking about maybe a fastener kit or glue kit which goes with you to the assembly table during use, then back on the rack. Congrats on your success (116K subs) since going full time.
Thanks! I watched this video before finishing my cleat wall. Luckily, I bought my nice plywood before the spike in prices! I like the look of that double 45 on the wall! I launched right into a specialized holder that had the side benefit of freeing up floor space in my shop...winner, winner...you know the rest! Lol! Thanks for sharing! Brilliant!
I'm not sure why this is a new idea. I've wondered why we've always thought that the bottom side of the clear had to be square? So much easier to just cut repeat 30 or 45 degree bevels from the sheets. This is how I've always envisioned my French cleat walls.
French cleats have a problem, the shelves will fall off very easily if you kick them from below. A common solution is to insert a removable piece attached to the shelf just below the slat (a slider from the side, a dowel from the front) to lock the shelf at the bottom square edge. This new approach prevents that solution.
@@ARichli, but for situations where that could become a problem you simply have to cut one of these in half, and if you want your whole wall to have standard-shaped cleats you can double the width from the blade to the fence, cut them all like this and then cut them in half at 90°. It's a lot easier to find and cut the halfway mark at 90° between two 45° sides than the other way round.
You forgot 2 of the other main features and advantages of the new angled cleat 1) they look better on the wall as they don't cast same harsh shadow 2) you can have them closer together and still slide your holders in place so can put more actual wall mounted cleats which allows more adjustment and customising where everything goes! The old system you need a minimum space above each wall mount to allow space to slide up and pull out while the angles new style can be basically spaced the exact size of the cut cleats..
Can also use 1/2" ply for closer wall cleats and cleaner look. Few things are so heavy they'd bust out of 1/2". And if your wall cleats are close enough, use two for the heaviest stuff. Cheaper and better!!
I think your number 2 is the biggy, but not only does it increase flexibility, it enables that plus use of multiple cleats at different vertical heights to support an item.
So does this mean the fixture holder won't fall off the wall if it is hit? If it still can fall off is there a way to lock it to the wall like Chris shows in other videos?
tHanks for the cleat over cleat idea. I've not seen that in the Internet before. I'm pretty sure I've also watched all the RUclipss out there.....all of them. This one was good!
The parallelogram style can also be used to flush mount a structure to the wall. Just cut a matching relief in the carcass of the cabinet you want to hang. Then it slides right down the parallels and stops at the wall.
Trash bag holder with extension is brilliantly made you have me something to do with my trash bags and rubble bags thanks a million. You make it so simple to make and yes I would always use screws as well as glue for added protection
Perfect for often used accessories and hardware that are used with whatever tool is being hung on the main holder. Bits and blades instantly come to mind. One for your trim router holder that holds bits, wrenches, auxiliary bases, etc. …. Grab the tool then grab the tray and off to work. Geniusly simple
Fantastic video. Really glad Pete and you have collaborated to showcase this. I'm in the process of redoing my cleat system and this came just in time!
Thats great, I am imagining a stacked sand paper roll holder system like you did with your trash bag holder, but add on an old hacksaw blade on the bottom slot to tear the paper easier
Thanks for the example of how you cut these. I have made that “death cut” before. I am still freaked out by the thought of it and won’t do it again. Great video as usual! Have a great rainy weekend!
I really like that idea but until plywood comes down, unfortunately won't have a lot but it's what I'm looking for. Love ur videos, I can learn from you all day long!
Just a thought: You may be able to simplify communicating your cleat formula (width being synonymous with thickness and material having dimensions of length, height, and width/thickness): Simply add the height of material + width (thickness) of material + thickness of blade and divide the sum by 2: (H + W + Tb)/2 = distance of fence from edge of blade (tooth).
With the addition of a hacksaw blade at the front edge, just at the outfeed point, your bag holder/dispenser could be adapted to dispense emery cloth (from a roll), or other "tear-off-the-roll" materials used in shops. I'm about to build my tool storage and I'll use the latest design (double bevel). Nearly all of my tool storage will be in/on rolling walls that are billeted under a staircase that's open on one side to the shop floor. When in use, the whole unit will roll out, and when not in use, the tools are both hidden and not taking up precious footage in the room.
I'm sold, AND subscribed! I built a modular workbench and am going to build a cleat style platform to attach to it so I can mount my small table saw or router table. These are great, functional ideas! THANKS!
So now I reached the "awesome" part. I kind of had guessed it when the parallellogram cleats were cut. I am not exactly impressed by the execution, although the basic idea might be made to work in one or two different ways. But as I see it the crucial point of french cleats is that all holders have the _same_ type of cleat. By introducing a second, spaced, type this no longer is the case, and such holders would require adding a filler piece to be mounted directly on the F.C. wall. Although that _is_ doable, it is less convenient, and old holders of the basic type would still not be mountable on top of a new type cleat top. I'd go for tighter spaced wall cleats instead, and just add a regular cleat section edge up on the front of holders that have a backplate with some excess space on it. But only for holders that I would only want to move together with the "second layer" holder. Like a holder for a cordless drill could have a second layer holder for drills and bits. You grab the drill and the drill/bits holder off the base holder and take them to the work area. You could also have a portable cleat "wall" or toolbox, and mount the selection of tools - with holders - on or in that, and take everything with you in the car, for example.
I was thinking the same thing (not all holders are the same). What you could do instead, taking the trash bag Holder example, is instead of make the clear have the 45°, you make the back board of the trash bag holder (the one attached to the clear) have the 45°. That would mean, the top tray/item wouldn't need a spacer, and it's cleat would sit on top of the back board of the bag holder. Then all your cleats are the same, and you don't lose on space.
@@parttimewoodworker2225 So the lowest cleat will be a normal, maybe slightly taller (as its contact surface is reduced by at least one cleat thickness) cleat, which then acts as "wall" to the 45° edge on the backplate of the holder? I can certainly see that working nicely, and is saves both depth and mounting an upwards cleat, only requiring cleats and backplate to have the same thickness. Great idea!
Using the brad/pin nailer to hold while glue dries is great. I have a 23 guage nailer that I don't take full advantage of... But now that's gonna change. Thanks! Keeping you and your family in my prayers.
I'm so stoked about this system for my shop!! This was a AWEaaaYEAH moment when I saw the shipping station video. Combine those brackets with a entire wall of these cleats and a huge issue of my shop is solved!!
Used to call these Split Battens here in Glasgow,Scotland, used them to display information panels in public buildings, in my case Glasgow Museums 👍🏴
I like it, especially when you mentioned the little parts storage bins, my son has separate armor/leather/wood/black smithing/modeling etc stations and wants to mount bins to each of the stations, going to your site to see if you went forward with this idea.
Wow this would have been great to hang my kayak on the side of the shed before I gave it away at least now I know, but for real those are some nice workshops with very neat wall utility
Not sure if mentioned, but can also use the cleats on handtruck that has crossbar, or be added to a toolbox to attach boxes. I use the same bottom box for paper towel dispenser over a cleanup sink.
Hey Chris ... another great video. I gotta say, as a beginning woodworker, I watch lots of these woodworking videos and yours are some of my favorites. I highly respect you as a pro woodworker. I enjoy your style, the care you take to explain things clearly and most of all, your aesthetic and cleanliness. A man after my own heart ... and also, your down-to-earth ways and how you periodically showcase your cute daughter. Don't want to sound like a giddy fanboy, but, seems like like I would enjoy shootin' the breeze with you while enjoy a nice frosty brew. OK, enough doting. Thanks again Bud.
Alex thank you so much for this. I really appreciate you taking the time have a good day and letting me know brother. Hope you’re doing well sir and again thank you for the kind words
I bought some crown molding and cut the length I needed mounted to my items I wanted to hang and done. Was very easy since I don't have a circular saw to cut an angle.
That was a long hang on the hook haha, but that's a genius idea. Cleat on a cleat, and a module to bring to your bench for a particular project? Amazing!
When I find the walls of my garage, I'll try this out!
I can see the walls of my garage.
I just can't get to them. 😢
Lol
😂😂😂😂
My husband passed away almost 4 yrs ago. He was a real clutterbug and left his workshop in such disarray, that every time I went out to work in there I became overwhelmed. I didn’t know where or how to start organizing the shop until I started watching your channel. Thank you, you’ve broken the tip of my iceberg.
First of all Maria. So sorry to hear about your husband. Secondly I really appreciate you reaching out and saying since kind words about us here. I hope you’re able to get his space organized once again. And again thank you so much God bless
Maria, that was a nice post. May spring begin to slowly move that iceberg out of your way.
Every cloud has a sliver lining
Soon you'll be able to fix that iceberg! 🧊 🩹 😉
Hope you are doing well ma’am, I can’t imagine the pain of of losing someone so close
I came here through Stumpy. Love your positive outlook 👍 I just turned 60 last week, and started woodworking a few weeks ago, so I am brand new. I hope I can learn from you as well. Steve Ramsey was my first “teacher” and I am now addicted to many more channels. Good luck with your channel and your family. They are so lucky to have you as a carer. Best wishes from a young at heart female in Germany 🙋♀️
The thing running through my head is just imagine having birch ply so readily available 😂 the dream
and at the price they pay in the U.S.
@@rowey1992 how much is it where you're at where im at in the US its about $55 usd for a 3/4"x4'x8'
Just to waste it on stupid crap, that looks like 7th grade shop class projects!
@@rollotomasislawyer34057th grade appearance aside. is it really a waste considering you're here and commenting about it, thus adding to his views and increasing his portion of ad revenue.
@@bsmbB you'd be lucky to pay less than £110 in the UK and the quality would be far worse
It's nice to see a person who truly loves his hobby
20 yr carpenter from metro Detroit MI here. Love your enthusiasm and ideas! I'm too busy working in the field to set up my garage for finish work. One day soon hopefully. I'll be "barrowing" your tips and ideas. Thanks
Thanks brother I appreciate
Love the hanging system for a home shop, keeping things modular and mobile like that is so handy.
I'm going to start installing a cleat wall on my new shop wall tomorrow morning. I was browsing videos to gather ideas and find the do's and don'ts before I begin.
This was the last video I needed to watch and I am glad I saw it before I started.
The parallel cleat idea eliminates steps when cutting the cleats and, as you said, adds functionality without a down side.
Thanks for sharing.
This is a great idea. I'm going to modify it for paper towels with a box on top for cloth rags for finishing on my lathe.
Excellent idea for the shop. Been using cleats for over 30 years to hang custom cabinets but never thought about using them this way. Thank you Sir.
Dude, how have I not thought of this before lol Going to re-due my cleat wall as soon as I get home.. this is brilliant lol
How is it that so many Americans can't figure out the difference between 'due' and 'do'? They don't mean the same thing. Heck, they're not even pronounced the same. Or aren't supposed to be, at any rate.
I used the French Cleat to hang my flat screen TV about 6 years ago. It saved me some money and worked like a champ.
Add cleats to a storage trailer and you can easily set up a mobile workshop without having to duplicate all of your tools, supplies, and storage containers. You could probably create a work bench that hooks into the French cleat system and has foldable legs. This also frees up that storage trailer for other uses; moving, transporting big toys, camper set up….
One idea I have seen and like is to put a small french cleat around the edge of your workbench. Then you can move small parts bins with the cleat and hang them on the side of your bench so it's convenient and not taking up space on your workbench.
Love the video, something that I use the french cleats for is securing my sky workstations to the wall. I have a single car garage with taller ceiling due to being unfinished and exposing the roof rafters, but I still want to be able to park in the garage, and having workbenches and places to put all my woodworking stations was not viable on the ground, because typically you build a workbench or station to sit on the ground, but my ground space is off-limits when my car is parked in the garage. So I built smaller standalone stations that my equipment is mounted to IE sander, router, grinder, and such.. and instead of building them to sit on the ground, I use multiple french cleats on them and have them on a cable pully system that stores them up in the ceiling corners of my garage out of the way when I need one of them, I lower it via the cable assigned to it, then as it's lowered down I attach it to the wall on the french cleats so I can use it. When I am done I lift them back up and out of the way.
Sounds like a good way to arrange e.g. tire pressure guage & engine oil storage for the car too.
Do you have a video showing this? Seems like a design a lot of people with smaller shops would be interested in.
I have the same problem and would love to see more about how you’ve done this
Same here.
Another most excellent comment!
We're looking to build a new house soon and I am planning on doing French cleats in the pantry. This will be perfect to add even more modularity and functionality.
Most excellent comment, love a good idea.
Chris, It's true; there is something oddly satisfying about a good French cleat application. So obvious, but so clever at the same time.
Not going to lie, def. had a jaw drop moment. Thats crazy smart!
Good idea. In the professional millwork world, french cleats are done a little differently, they're rabetted cleats instead, which I found is for good reason. If you're hanging wall panels that need to sit side by side and line up with millimeter precision, a diagonal cleat like this will sometimes cause issues. If the wall isn't straight, the panel will tend to ride higher on the cleat and not sit tight to the wall or flat down to the bottom, the rabetted cleat gives reassurance here, either it doesn't go on at all, or it sinks down tight to a reliable height. It's a special case of course, this diagonal cleat is definitely faster and easier to make and will do a great job in regular circumstances.
Do you man z-clips?
What do the rabeted freanch cleats look like?
Do you man z-clips?
What do the rabeted freanch cleats look like?
Do you man z-clips?
What do the rabeted freanch cleats look like?
Do you man z-clips?
What do the rabeted freanch cleats look like?
Do you man z-clips?
What do the rabeted freanch cleats look like?
I didn't want to sound so negative, I like your videos. I'm just making my own F.C. system now, and as I live in an apartment and don't have space nor money for a table saw (and it wouldn't be popular with the neighbors either), I have found a very cheap and easy solution. I can buy very cheap length of triangular wood, meant for filling edges of roof constructions I think. They are simply cheap roughly planed 2"×2" fir cut diagonally. I plane the cut side (quite raw) reasonably smooth, then turn it over and plane the 90° outer corner down until I have a flat side about 20 mm wide, giving a trapeze cross-section. I don't plan on hanging anything really heavy on them, so although this is cheap and maybe not as strong as plywood, it will work fine. I haven't thought of a way to use the downward edge yet, but I'm sure I will.
After the third "why is that important, I'll get into that later" I was out of patience. Guess I'll never know...
same here...
Same here
Also
Same
Same
As soon as you put in those diagonals I figured; paper towel dispenser!... Didn't think of trash bags, but same difference right.
Awesome stuff
That hammer/screw technique looks really useful! I'm gonna have to try that. Thanks!!
I thought everyone knew that, I have even seen people make fun of that as the lazy way of avoiding drilling pilot holes. I can't tell you how many times I have done that using drywall screws.
You need one of my French Cleat Caddys! Enjoyed the tweaks you’ve made. May have to try some of those.
This is a very well done channel. It provides plenty of detail, moves quickly and doesn't bog down with pointless banter.
Thank you so much
I took a look at Pete’s video on these. And the advantage he points out is being able to slip tool holders below other tool holders that would be in the way. But that still only works if the tools hold doesn’t stick out where it would block inserting or removing the tool holder below. Some of his tool holders in his video, you can’t put a tool holder below without still removing the one above. In your case, you are creating a cleat on a cleat, to add a tool holder to an existing one. Good job.
Well done, dude! Subscribed!!! I have French cleats in my garage, and the flexibility and efficiency they allow are second to no other wall storage.
Do you have any photos or vids of how you set them up? I'm planning my garage cleats and I'm trying to decide on the distance between the cleats. 12", 6", etc.
I love French cleats. I'm going to make my own tool wall and I will be using this new cleat because I'll be adding, and adding, and shuffling, and adding ...
While the two 45 degree bevels make stacking possible like you've shown, I think a bigger benefit was missed. Having the cleat on the wall have a 45 bevel on the top and bottom means that the two cleats can be closer together. The 45 on the bottom of the wall cleat coupled with the top 45 on the storage device means they can slip together and apart more easily. This is very helpful if making many small part holders for things like screws or loose tenons.
Any chance you know of a video explaining this a little better?
@@jonathangaliano2617 This channels most recent French cleat video demonstrates this very well. Instead of having the 45 degree bevel only on the top edge and the bottom be a 90, both the top and bottom are cut at 45. In the latest video, you'll be able to see how close the two cleats are together. Hope this helps.
I'm a cabinetmaker in New Zealand 🇳🇿 and I've been using this "new" idea since about 1996. Have several cordless drills with the spare batteries on one cleated shelf and the charger on another one above. And all I do is cut some strips of whatever is lying around to 75 mm and then cut the 45 on one edge. Can't be arsed working out blade widths etc and I'm using a Casedai KS 30 dimension saw WITHOUT a sacrificial fence.Good idea but it's already out there.
That is amazing! I'm getting ready to build my french cleat system and will definitely be frequently visiting your channel for awesome ideas! Thank you! ❤️
Awesome glad to hear it. Thank you so much
Very cool new idea! I haven’t replied your posts in a while now. Sometimes I’m just not in the mood for new ideas but I regularly download videos & save them. Sometime later I come back when I have more time & watch. I have two walls of my shop for French cleats including some nice cherry cabinets purchased in a yard sale, before I ever had my shop built. I’m taking some of my tool holders down & redoing them to be more versatile. Thanks for this idea & all the great videos you’ve done.
I love the concept of your more universal cleat setup, especially the cleat on cleat possibilities. I don't have much free wall space, as I have tons of cabinets (repurposed kitchen uppers, with doors), but your concept makes great use of the end caps and even using the doors themselves for 'tool wall' storage. The trash bag holder with the bottom that sits flat on a bench gives me many ideas for the 'portable' tool holders, as that concept has more utility than the 'rearrangeablity' (is that a word?). I am thinking about maybe a fastener kit or glue kit which goes with you to the assembly table during use, then back on the rack.
Congrats on your success (116K subs) since going full time.
I made couple of cleat all around under the work bench, now I can use it as tool holder
Guys he came up with that formula. Yeah it's used in 50 other creators videos but he was the mathematician who thought it up.
LOVE the “cleat on cleat” trick!!
Thanks! I watched this video before finishing my cleat wall. Luckily, I bought my nice plywood before the spike in prices! I like the look of that double 45 on the wall! I launched right into a specialized holder that had the side benefit of freeing up floor space in my shop...winner, winner...you know the rest! Lol! Thanks for sharing! Brilliant!
I'm not sure why this is a new idea. I've wondered why we've always thought that the bottom side of the clear had to be square? So much easier to just cut repeat 30 or 45 degree bevels from the sheets. This is how I've always envisioned my French cleat walls.
I know right it makes perfect sense. It’s weird how we’ve never seen this in abundance before
French cleats have a problem, the shelves will fall off very easily if you kick them from below. A common solution is to insert a removable piece attached to the shelf just below the slat (a slider from the side, a dowel from the front) to lock the shelf at the bottom square edge. This new approach prevents that solution.
@@ARichli, but for situations where that could become a problem you simply have to cut one of these in half, and if you want your whole wall to have standard-shaped cleats you can double the width from the blade to the fence, cut them all like this and then cut them in half at 90°. It's a lot easier to find and cut the halfway mark at 90° between two 45° sides than the other way round.
That's some huge plywood flex! That's my kids college tuition on that wall!
You forgot 2 of the other main features and advantages of the new angled cleat
1) they look better on the wall as they don't cast same harsh shadow
2) you can have them closer together and still slide your holders in place so can put more actual wall mounted cleats which allows more adjustment and customising where everything goes!
The old system you need a minimum space above each wall mount to allow space to slide up and pull out while the angles new style can be basically spaced the exact size of the cut cleats..
Can also use 1/2" ply for closer wall cleats and cleaner look. Few things are so heavy they'd bust out of 1/2". And if your wall cleats are close enough, use two for the heaviest stuff. Cheaper and better!!
I think your number 2 is the biggy, but not only does it increase flexibility, it enables that plus use of multiple cleats at different vertical heights to support an item.
So does this mean the fixture holder won't fall off the wall if it is hit? If it still can fall off is there a way to lock it to the wall like Chris shows in other videos?
I added this video to my "saved" pile. I've never taken the time to truly organize my shop but that's coming soon. Thanks for a great tip.
Very cool , keep creating !
The parallel 45 cleat is awesome!
tHanks for the cleat over cleat idea. I've not seen that in the Internet before. I'm pretty sure I've also watched all the RUclipss out there.....all of them. This one was good!
The parallelogram style can also be used to flush mount a structure to the wall. Just cut a matching relief in the carcass of the cabinet you want to hang. Then it slides right down the parallels and stops at the wall.
Trash bag holder with extension is brilliantly made you have me something to do with my trash bags and rubble bags thanks a million. You make it so simple to make and yes I would always use screws as well as glue for added protection
Saw this and I literally gasped when it was revealed what it was. Will add this once I get my french cleat system up.
Perfect for often used accessories and hardware that are used with whatever tool is being hung on the main holder. Bits and blades instantly come to mind.
One for your trim router holder that holds bits, wrenches, auxiliary bases, etc. …. Grab the tool then grab the tray and off to work.
Geniusly simple
Fantastic video. Really glad Pete and you have collaborated to showcase this. I'm in the process of redoing my cleat system and this came just in time!
Thats great, I am imagining a stacked sand paper roll holder system like you did with your trash bag holder, but add on an old hacksaw blade on the bottom slot to tear the paper easier
Thanks for the example of how you cut these. I have made that “death cut” before. I am still freaked out by the thought of it and won’t do it again. Great video as usual! Have a great rainy weekend!
A colleague lost fingertip and skin...
I really like that idea but until plywood comes down, unfortunately won't have a lot but it's what I'm looking for. Love ur videos, I can learn from you all day long!
Just a thought: You may be able to simplify communicating your cleat formula (width being synonymous with thickness and material having dimensions of length, height, and width/thickness): Simply add the height of material + width (thickness) of material + thickness of blade and divide the sum by 2: (H + W + Tb)/2 = distance of fence from edge of blade (tooth).
I really like your table saw sled ,very nice your French cleat superb.
Great idea, I really like the design.
Thanks buddy I can’t take credit. And yes it is a great one
@@AGlimpseInside why not give credit where credit is due?
You clearly didn’t watch the video
Does Pete have a channel? Where can we see more of him? :-)
@@SJagneaux the channel is petesquared
Alas ,,, Le taquet Francois . Dons utile et simple . Merci pour Voutre video . Hello from New Orleans by the way .
With the addition of a hacksaw blade at the front edge, just at the outfeed point, your bag holder/dispenser could be adapted to dispense emery cloth (from a roll), or other "tear-off-the-roll" materials used in shops. I'm about to build my tool storage and I'll use the latest design (double bevel). Nearly all of my tool storage will be in/on rolling walls that are billeted under a staircase that's open on one side to the shop floor. When in use, the whole unit will roll out, and when not in use, the tools are both hidden and not taking up precious footage in the room.
I'm sold, AND subscribed! I built a modular workbench and am going to build a cleat style platform to attach to it so I can mount my small table saw or router table. These are great, functional ideas! THANKS!
So now I reached the "awesome" part. I kind of had guessed it when the parallellogram cleats were cut. I am not exactly impressed by the execution, although the basic idea might be made to work in one or two different ways. But as I see it the crucial point of french cleats is that all holders have the _same_ type of cleat. By introducing a second, spaced, type this no longer is the case, and such holders would require adding a filler piece to be mounted directly on the F.C. wall. Although that _is_ doable, it is less convenient, and old holders of the basic type would still not be mountable on top of a new type cleat top. I'd go for tighter spaced wall cleats instead, and just add a regular cleat section edge up on the front of holders that have a backplate with some excess space on it. But only for holders that I would only want to move together with the "second layer" holder. Like a holder for a cordless drill could have a second layer holder for drills and bits. You grab the drill and the drill/bits holder off the base holder and take them to the work area. You could also have a portable cleat "wall" or toolbox, and mount the selection of tools - with holders - on or in that, and take everything with you in the car, for example.
I was thinking the same thing (not all holders are the same). What you could do instead, taking the trash bag Holder example, is instead of make the clear have the 45°, you make the back board of the trash bag holder (the one attached to the clear) have the 45°. That would mean, the top tray/item wouldn't need a spacer, and it's cleat would sit on top of the back board of the bag holder. Then all your cleats are the same, and you don't lose on space.
@@parttimewoodworker2225 So the lowest cleat will be a normal, maybe slightly taller (as its contact surface is reduced by at least one cleat thickness) cleat, which then acts as "wall" to the 45° edge on the backplate of the holder? I can certainly see that working nicely, and is saves both depth and mounting an upwards cleat, only requiring cleats and backplate to have the same thickness. Great idea!
This is the easiest most straightforward way I have seen. Thank you once again
I used a French cleat to hang my big screen tv on my fireplace. It keeps it tight to my stone work😊
Using the brad/pin nailer to hold while glue dries is great. I have a 23 guage nailer that I don't take full advantage of... But now that's gonna change. Thanks! Keeping you and your family in my prayers.
A cleat on a cleat is so very neat. You nailed it dude, so I will not repeat.
Pete’s French cleat holders are actually as much art as they are superb organizers!
#Facts. He is such an inspiration
Something to think about, I like how you used it here. I learned something new.
I'm so stoked about this system for my shop!! This was a AWEaaaYEAH moment when I saw the shipping station video.
Combine those brackets with a entire wall of these cleats and a huge issue of my shop is solved!!
Oh yeah that would be absolutely epic
Used to call these Split Battens here in Glasgow,Scotland, used them to display information panels in public buildings, in my case Glasgow Museums 👍🏴
Ooohhhhhhh I see, that's actually a pretty dang good idea
That trash bag dispenser is genius! Nice job! Love that cleat system too!
Thanks brother great to hear from you again
Great idea for trash bags. That will work in my van too. I'm gonna make one
Great idea man. I wished to see this earlier. That woukd have saved me some extra rows on the wall (about 7cm space between them all)
This french cleat seems to be so smart ! I keep this idea in my mind. Love from... France 😉
Improving on an already great idea..... beautiful. Thanks
I like it, especially when you mentioned the little parts storage bins, my son has separate armor/leather/wood/black smithing/modeling etc stations and wants to mount bins to each of the stations, going to your site to see if you went forward with this idea.
Excellent ideas. I've been using french cleats for years but these are something I've never thought of. Many thanks for sharing.
Stacked cleats!! It was almost like watching "The Sixth Sense" to the end and it was awesome! Lol
thanks for all the tips, I really liked the brad nail first before screwing one. I used 23/32 cdx.
Yeah that’s a good one I always do that as well. Glad you got something out of Michael take care yourself and stay safe
I really like your channel and I think your explanation for the projects, with your style is refreshing. God bless you!
Such a cool idea using cleats, plus if you plan on taking it off the backboard regularly, you can also cut out a handle.
Get into it now!!! That's why I picked to watch this video.
Wow this would have been great to hang my kayak on the side of the shed before I gave it away at least now I know, but for real those are some nice workshops with very neat wall utility
Excellent idea. Thank you for "A Glimpse Inside" your shop.
Nice! I would just make the trash bag dispenser holder wider or even open on one end, since manufacturers size them differently.
Double bevel is ingenious, thanks for sharing
I'm now going to bindge watch your channel to get the confidence to start a cleat wall 🙏🏽
What??! Pete?!! Yeah!!! So cool to see Pete here for this video! Very “Apropos”!
Thank you so much Chris! Awesome video and glad your liking the extra French cleat angle! 👍👍👍👍👍
Of course man and thank you. Happy to bring light on the subject
Nice video. Like the cleat on cleat idea. Something different from the usual cleat videos. Thanks
Ha, clever ideas on setting up wall space in the workshop 👍 thanks for sharing..
That's a fresh idea and I can see many uses for it in the shop. Doesn't take any more wood so "WHY NOT! !! !!!
Not sure if mentioned, but can also use the cleats on handtruck that has crossbar, or be added to a toolbox to attach boxes. I use the same bottom box for paper towel dispenser over a cleanup sink.
Great idea, specially for smaller workshops
Hey Chris ... another great video. I gotta say, as a beginning woodworker, I watch lots of these woodworking videos and yours are some of my favorites. I highly respect you as a pro woodworker. I enjoy your style, the care you take to explain things clearly and most of all, your aesthetic and cleanliness. A man after my own heart ... and also, your down-to-earth ways and how you periodically showcase your cute daughter. Don't want to sound like a giddy fanboy, but, seems like like I would enjoy shootin' the breeze with you while enjoy a nice frosty brew. OK, enough doting.
Thanks again Bud.
Alex thank you so much for this. I really appreciate you taking the time have a good day and letting me know brother. Hope you’re doing well sir and again thank you for the kind words
Your psychic.... I'm literally about to start a wall of French cleats in my new shop next week!!
F….. just in time! planned to cut my frenchcleat strips tomorrow.. will change to this 2x45* version! Thanks!
The “Pete Cleat” is AWESOME!!!
I bought some crown molding and cut the length I needed mounted to my items I wanted to hang and done. Was very easy since I don't have a circular saw to cut an angle.
Wow. I wish I had all those tools. Need to hang a very heavy mirror. Like 50#. Gonna try this.
Thanks for the tip. Very functional and I will definitely try it in my shop. Thanks for sharing.
That was a long hang on the hook haha, but that's a genius idea. Cleat on a cleat, and a module to bring to your bench for a particular project? Amazing!
I just finished my french cleat wall. Wish I would have seen this video before I started.
Cool, I finally know how I'm going to organize my walls in shop and garage