How To Store Paint Roller Sleeves. Make your own container to store sleeves overnight & longer.
HTML-код
- Опубликовано: 6 янв 2022
- Storing a paint roller sleeve over night can save time compared to washing them out after every use. In this video I will show you how to make your own storage container. There are a few ways you can store roller sleeves over night or even longer and this is one of the best ways to do it. Using a storage container you can keep the roller sleeve wet for up to a month if keep in cool conditions. If left in the heat it may only last a week or two before it goes hard.
Хобби
Wow this is one of those things that makes you go "well now how did i not think of that? Thats brilliantly simple."
Nice work mate have watched most of your videos
Awesome work have subscribed cheers
So good to see you back! 🖌
Thanks,
Don't forget to Like, Share and Subscribe.
Yeh good to see you back!!
👍🏻
Well hope I can start up loading more often
Great to see you back mate!
Thanks , will try to keep them coming.
Don't forget to Like, Share and Subscribe.
Excellent video mate , very similar to what i do , i bought some black fishing float tubes off ebay to store mine in and they're excellent for storing 18" sleeves that i tend to use most . The red end caps have a tiny hole that i just cover with glue or silicon to make them air tight . I wrap in a fresh plastic bag as well just to ensure they don't dry out at all and always use a fresh bag after use and storing again.
Good to see there are other things that can be used.
Don't forget to Like, Share and Subscribe.
: o new video! Welcome back!
Thanks.
Don't forget to Like, Share and Subscribe.
great info bro good too see u back
I have been a bit slack in uploading video's, will try harder this this year.
Don't forget to Like, Share and Subscribe.
Awesome idea, thanks from 🇨🇦
You’re welcome 😊
Don't forget to Like, Share and Subscribe.
OMG you're a genius!!! Thank you so much!
Your welcome.
Don't forget to Like, Share and Subscribe.
Appreciate you sharing the knowledge and tips how to paint. Do you have recommendation for what type of brush or roller to use for internal plaster brick wall? What size of extension poles are needed for DIY paint a new house? Thank you!
Like that.
I've been using plastic bags (no holes) that I put a knot in the end after twisting it...works ok.
Yes plastic bags do the job, have used them before myself.
Don't forget to Like, Share and Subscribe.
Glad Press'n Seal. Can be used to line roller trays as well
There are a few ways you can store a roller sleeve and this is just another.
Don't forget to Like, Share and Subscribe.
Been using tin foil myself. Wrap and then store in fridge if waiting more than a few days before starting back. The foil keeps the rollers wet and are less messy than plastic.
As long as it is kept in an air tight container then it should be fine.
Don't forget to Like, Share and Subscribe.
great video. thanks!!. how did you store them in your place ?
Generally I will wash all rollers out before leaving the job so all rollers will be clean and just stored in a plastic tub.
Don't forget to Like, Share and Subscribe.
Now I know what to do with my pipe off cuts.
Yes they can become handy for something.
Don't forget to Like, Share and Subscribe.
@@howtopaintinfo Thank you but have been a subscriber for ages.
Good to hear.
Great videos. I have a question - I have a James Hardie wood grain fibre cement board that I want to look like cedar. (it's actually the eaves of the house). Is there a stain or paint available and how do I do this.
If its un-painted you could use a stain, you will just need to try a few samples to get the colour you require. The other option is to get a paint colour close to what you want. Hope that helps.
Don't forget to Like, Share and Subscribe.
Im going to make one. Seems so easy. Just pop the wet roller in and cap the tube. The only issue i see is that there would always be some air sealed inside with the wet roller. Ive only seen other painters use plastic bags but they are messy and there will always be some air trapped inside. I think plastic wrap is good as you can wrap tight and better ensure that there is no air.
The air trapped inside will make a difference but I would say comfortable you will still get 2 weeks out of it and longer. I had one the other day that must of been in the tube for 4 weeks and it washed out fine but it has been cool to cold weather here lately.
Don't forget to Like, Share and Subscribe.
Mate where have you been all this time?!
Lol, working, I do have lots to sort through, will try to keep uploading.
Don't forget to Like, Share and Subscribe.
Monarch sleeves come with containers as well
There are a few different brands that come in containers.
Don't forget to Like, Share and Subscribe.
That’s a lot of time and expense when you have plenty of containers available that are free. When I was in the trade I had 2 x 10 litre buckets with lids in my van. One was for dirty rollers that needed to be washed for another colour and the other one had cleaned rollers that were stored in water. The dirty roller was stored in water in the dirty bucket and the cleaned ones were ready for use after they had been spun out with a roller spinner. The dirty rollers were cleaned at home with a small plastic cylindrical device that fitted onto a hose and could clean a roller from black in less than 5 listers of water. I went overseas for a couple of years and stayed for 10 and came back and checked the rollers. They were as good as the day I left them
Miss the videos mate any sign of a comeback? 😁
working on it, still have lots of footage to edit.
I have a dumb question...
Do you remove as much paint as possible before storing the roller?
No opposite, the more paint on the roller the wetter it is the longer it will keep.
Don't forget to Like, Share and Subscribe.
Wrap it in a plastic bag or cling film and stick it in the fridge.😊
Plastic works but the sleeves work better and it's fine if you have a fridge handy, doing new construction there are not fridges.
Don't forget to Like, Share and Subscribe.
😄 Promo`SM!!
Don't forget to Like, Share and Subscribe.
Just use a empty pringles tube
They wouldn't fit 14 or 18 inch rollers.