Just when you think it's going to be a good day.....
HTML-код
- Опубликовано: 15 фев 2024
- Day in the life of a plumber
In todays episode I first fix for a disabled toilet and attend a boiler breakdown
As always, thanks so much for watching, all the support is so greatly appreciated
#plumber #plumbing #apprentice #dayinthelife #boiler #howto
You're some man Tom, working until 1 in the morning, chasing your arse all week and still find time to do a video for us. Take care please. 😊
Thanks for the support as always Hugh, I used to able to do it and not feel it, I must be getting old, have a great weekend
hi tom your patience is something else how you get time to do the video content for us all to follow on what seems a never ending work load . thanks for all the stuff you do it much appreciated 👍
Thanks for the support Derek, I just keep plodding along
Tom, I would recommend drilling the air diffuser hole bigger if the boiler keeps locking out. Riallo had a batch where the locking grove was not quite in line with the photocell. You either had to lock the electrodes in place to the side of the grove on the shaft or drill the hole a little bigger. If you are finding coke buildup around the hole check the distance of the head and make sure it's correct. Sometimes the adjustment screw/knob thing? (Found on the copper pipe just under the photocell if memory serves me right) Rotates via vibrations when running. If this seems to be the case tape it in position. Lastly I would check and change the capacitor especially if you find it's started to leak around the terminals. Then again, it could just be a one off lockout like you say. Good luck and keep up the videos!
Thanks for the support, I didn't really go too deep into the boiler as they were under a contract with another company. I was really just checking for safety as I have a duty of care once I've been called to a job. I checked the readings from the last service and they were quite a bit out on the C02. The boiler did appear to burning quite clean though and I just advised the client to get the boiler people back.
When u where Wiping that thing with the Wet wipes it was sending my ocd threw the roof 😂 keep the good graft up pal
Thanks for the support mate
Great video Tom...... Always a nightmare when the pressure starts getting to you and you need to be in a million places at once
Thanks for the support as always Mark
Always remember mate, 3/4 of the worlds surface is covered in water, that few gallon we as plumbers spill on the floor is F all! Lol Great content as always mate, have a good weekend
I like that Gary, I always say water is just a plumbers sawdust, joiners seem to get enough of it about, thanks for watching mate
I’ve been watching your videos for a while now Tom without ever commenting. But I feel I need to say your skill set is second to none. You make interesting videos and explain things very clearly. When you get to old for the tools you’d make a great teacher. Well done
Thanks for the support Stuart, I really apprecaite the kind words, I was fortunate to have been taught by a great plumber and I really enjoy passing on some stuff he taught me, have a great weekend
Excellent informative video Tom, really enjoyed watching. As commented earlier surprised you don't have more subscribers as without doubt best plumbing channel on here. Have a good weekend regards A
Thanks for the support mate, I'm sure subscribers will come with time, I just need to focus on making the best content I can, and keep working hard, have a great weekend
Hi Tom great video as usual,when I started out plumbing in 1979-2000s your jobs take me back,and I cannot get enough of your videos, I love your passion for the trade ,and your saying it is what it is was we all use to say occasionally depending on the job,and your preference for soldering joints over press fit is great as in my day we never had press fit,your channel is by far the best for plumbing and keep up the great work and I will be watching, have a great weekend. Regards Allan
I really apprecaite the support Allan, hopefully I have plenty more videos to come in the future, have a great weekend
Good work Tom as always. Pipework is neat and tidy. You put so much hardwork to it. thank you for the video. Keep it up.
Thanks for the support mate, it is greatly appreciated 👍
It's all to a standard, even if it's a low one . Well done Tom honest as ever
Thanks for the support as always mate, you know what it's like sometimes, have a great weekend 👍
I’ve said it once and I’ll say it again, how have you only 7k subscribers! You should be in the 50k mark at least!
Thanks for the support as always mate, I might get there one day, all I can do is keep working as hard as I can, try to keep improving the videos and keep enjoying what I'm doing. I really do enjoy making them and I'm so pleased to be have built such an amazing supportive community
Have to agree..there are some plumbing channels who basically do 3 min vids and influence products for 2mins of that...tom should be at the top....dont understand youtube...
I apprecaite the support Paul
Steady pal be careful with stress levels in your trade ive had it years ago where it nearly made me pack the lot up, great work mate.
Thanks for the support mate, it was just a bad week I think, I do love the job most of the time but there is a lot things people don't always see when they go into the trades
I feel your pain Tom, our planners thinks it only take 5 minutes to travel from job to job lol.
Hopefully you have a peaceful weekend. Cheers for all the efforts you put into your channel.👏👏
Thanks for the support as always Andy, the on "your way home" jobs get me, everyone always thinks everything is a 5 minute job, have a great weekend
Great knowledge around the trade. Absolute grafter.
Salt of the earth
Thanks for the kind words and support mate
Tough week Tom,
Fare play for still finding the time to get a good video out,
Have a handy weekend 😂
👍👍🤜🤠
Thanks for the support as always Tony, have a great weekend mate
Me and you both brother, I finished at 12 am last night , trying to explain to people that you can’t just walk off, and leave the people with no hot water and heating !!
It is a tough job sometimes, have a great weekend Nick, thanks for watching
You're a legend mate, keep doing what you're doing. Chest out, stomach in, you're an inspiration
Thanks for the support as always Liam, have a great weekend
Hi Tom, yep I know how you feel when you have worked very long hours, you are tired and you get pulled off one job you are setup on.
Then you have to travel and setup again, it’s frustrating especially after a long day. Some nice copper pipe work and soldering there and it all makes for another great film thank you. I hope you have a relaxing weekend, as always take care. 👍👍👍
Thanks for the support as always Chris, the phone always rings at the most inconvenient time, we got it all sorted though and a happy customer which is always the main thing, have a great weekend
Anyone in the trade understands your frustrations mate! Keep up the vids, have a good weekend off 👍
Thanks for the support mate, have a great weekend 👍
Good video Tom, we have started to install all tmv’s within 2m of the outlet for legionella purposes
Fair point mate, it is ideal to have the tmv as close to the outlet as possible, as the dead leg will require flushing, thanks for watching, have a great weekend
Great work Tom, great content as always . And like someone has said, don't know how you find the time, but glad you do.
Thanks for the support as always James
Neat work Tom, shame about the start, there’s nothing worse than getting all the gear out then having to put it away without even starting!
Thanks for the support as always Dan, it is the most annoying thing when that happens
O heck Tom what a week you have had 😯😯
I used to get that .get to the job tools in .then pack up to go to another job .that could have waited to later in the day .
Frustrates the he'll out of you 😯😯.
Putting some hours in as well Tom ..
Hope you had a great relaxing weekend. 👍👍👍👍
Thanks for the support as always John, it is a tough jobs at times, loads of work and time you don't always see unless you have done the job
Great video Tom Love watching your videos keep them coming mate
Thanks for the support as always Keith
The oil line had a solenoid valve on it next to the filter. Surely the mikrofil interlocks with it? That's why it locked out? Also the microfil should have a PRV if the inlet pressure is over 5 bar. They won't warranty it if it has seen higher pressure. 👍
The Mikrofill wasn't interlocked on this one for some reason, the heating has been leaking a while with the unit constantly faulting but it was the first time the boiler had locked out. The solenoid appeared only be interlocked in with CO alarm and the fire alarm. Thanks for watching mate, it sis greatly appreciated
Great video Tom. Liked and subscribed. I'm no plumber but a keen DIYer who likes to understand why things are where they are etc. What's the purpose of the run offs on the basin hot and cold feeds? Keep up the good work matey.
Thanks for subscribing mate, the drain offs are supposed to be fitted at the low point on a system, you won't really see it much on domestic as know one bothers but as this was light commercial I thought I would do it right
Cheers@@PlumbLikeTom and thanks for taking the time to reply so quickly. I'd seen that on our CH system but not on any basin feeds, so that explains it.
Been there Tom i live in Hinckley Leicestershire and then send to Norwich to change a shower head then Bedford on the home clueless
Nightmare sometimes this job, thanks for the support as always Glyn
Great vid as always Tom, make sure you prioritise you and your health 👍👍👍
Thanks for the support as always Chris
Hopefully you are relaxing Tom you definitely have earned your relaxing time enjoy , nice work even if it’s never too be seen again 👍👍👍👍just going too finish putting my Concealed cistern tank to the wall and hopefully no leaks should be done by 9 pm😂 😂
Hopefully everything went well, concealed cisterns were one thing I used to dread fitting when I first started, have a great weekend
Great video Tom 😊didn’t realise your near me, I’m in Lincoln 👍
Thanks for the support Jason, I do sometimes get Lincoln way
@@PlumbLikeTom it’s mad that your only 25mins away in sleaford. Having watched you channel for ages 😀 I see the vans around in traffic 👍
I don't have my van sign written as I like to stay under cover, I don't really talk to much about the business but we have 21 vans on the road now, it's my families company and I only look after the plumbing part
@@PlumbLikeTom wow must be a headache, rewarding though! Keep up the good work 👍
Done no end of them water heaters in uni student accommodation. Had to squeeze all that inside a vanity unit. Ridiculous. Good video as always tom.
I feel your pain Ashley, they are a pain, they should make a pre-plumbed unit with everything on, they would sell well I think, have a great weekend
Nothing worse than getting sorted on a job and the dreaded phone rings , it was a real pet hate of mine, time wasted always struggled with it to be honest Tom, great vid as always, take care mate and enjoy the weekend if you’re having a break. 🚽👍
Thanks for the support as always Peter, my old mate who taught me said it was worse when he had a pager, you couldn't respond back until you found a phone box, one day the pager ended up a river he got the annoyed with it going off, have a great weekend
Great video Tom. Plumbing can certainly test us some days. Have a good weekend 👍😎
You are not wrong there mate, it is the best job and the worst job sometimes, have a great weekend
Great video, Tom. There's always something going wrong. Have a great weekend.
There is always something, have a great weekend mate
Great Vid mate. I think its the universe having a laugh ---- why do easy 5 minuet jobs take 8 hours, and jobs that you just know are going to be a pain in the harris end up being easy and hardly take any time at all!!!!
Keep up the great work and videos 🙂
Thanks for the support as always mate, it's a funny old job sometimes, when you want to get on everything goes wrong
On the oiler I’ve had the nrv behind the nozzle leak. Great vid again Tom
It could well be that, they were under contract with a service company so I didn't spend too much time looking, I just made sure everything was safe as I have a duty of care once I've touched it, thanks for the support as always mate
Ur a great plumber Tom keep it up love the videos
Thanks for watching mate, glad you enjoy the videos
Love watching your videos mate I’ve been in your position a few times this job can stress you out but you always smash it mate !
This job does get stressful, thanks for the support as always
Great thumbnail, intro and editing 🎥
Glad you enjoyed mate, thanks for the support as always
👍👍 keep your head up
I think I was just having a bad day, thanks for watching, have a great weekend Brian 👍
Not a criticism Tom. Just been in the same situation before.
Love it Tom. It’s a jungle out there mate.
It certainly is, thanks for watching, have a great weekend
Love watching your videos mate feel like I’ve been in your position a few times this job can get to you at times proper grafter though hope they pay you well ! 💪🏻
Thanks for the support mate, have a great weekend
As usual another great video it's tough when you have to work long hours and then get the office calling to just nip off somewhere else as though it was not a problem I had a boss a few year ago is two favourite words were nip and pop even if the job was 2hours drive away 😀 😂 look forward to the next video.
My old boss was like that as well, I swear he would not ring you until he knew you would be leaving for home, just so you didn't leave early to go to the job, have a great weekend Mick
amazing Tom. take some time off if you can over the weekend mate.
Thanks for the support as always Craig, have a great weekend
Remember Tom that job will be there when you are no longer mate you need to chill out a bit ❤
Quality video as usual, Have you thought about having a beer after work or may be get a punch bag to take out you're Stress levels. Regards Dave.
Thanks for the support Dave, I don't drink much to be honest, it has to be a special occasion, have a great weekend 👍
😊😊😊😊😊😊
Thanks for the support as always Ross
We ,all like a moan now and again makes you feel better Tom ❤
We all need to vent
👍👏
Thanks for the support as always Colin, have a greet weekend
Above and beyond as always
Thanks for the support as always mate, have a great weekend
Great video as always Tom👍👍
Thanks for the support as always mate, it is greatly appreciated
Just one of those days... I like those double 15mm clips, who makes those? I usually use the talon ones clipped together but it can make the pipes a bit too close for tees etc.
Thanks for the support as always Martin, I'm not sure who makes those clips, like you say the talon "clip" together ones space the pipes to closely together, I get but these from my local supplier, have a great weekend
They're called trade-fix kliplok. I get them from Wolseley
Take it easy Tom, you’ll wear yourself out. Work will be there when you won’t marra. Look after your self mate.
Thanks for the support as always Charles, I did get to me last week, I do enjoy the job though, have a great weekend
You're really selling this career change I'm making😂. Some days/jobs just go to pot dont they.
Dont forget to look after yourself too though bud. Burn outs no fun.
I saw a post that Mark tiff did where someone said his videos get them into plumbing, my videos probably have the opposite effect, have a great weekend
🤘😎🤘
Thanks for the support as always Wayne, have a great weekend
Looks like afterburn from the nozzle dripping.
You are probably right mate, I didn't go into too deep as they have a contract with another company, I was just really checking for safety, have a great weekend
They should give you the service job 😎
I would love to get the contract, I employ a service engineer who I keep busy all the time but It's always nice to get new customers, thanks for watching as always Neil
its not g3... but im sure they use cold for expansion
I do enjoy your video but I wish you would slow down and be more clear on your explanations
Thanks for the feedback John, I will do my best to slow down the explanations, sometimes my mind just races
hi when you are soldering an elbow how many seconds do you wait till you put the solder on after heating the fitting?
It depends on a few factors, I use mapp gas which gets hotter faster, you can normally tell when the flame goes slightly green, the fitting is at the right temperature, it does take practice but once you have done a few it is easy, remember getting the fitting too hot is as bad as too cold as it will burn the flux
Tom. Is there any difference between an accumulator tank and an expansion vessel?
In principle they are more or less the same thing, accumulators tend to be much larger as they need to be sized depending on the demand where as an expansion vessel is just to take up expanding, you can get pumped accumulators which boost the pressure up. You must fit a check valve on an accumulator to stop the water going back into the water main. Hope this helps, thanks for watching
Ah . Great. Have a good weekend mate. Put your feet up for a bit
Your mum said there would be days like this, she didn’t say everyday though!
Thanks for the support as always Dave, we love it though, wouldn't really change it
I wouldn't trust an unconnected isolating valve without a stop end!!
Fair point mate, I always turn the water off in empty properties as I don't trust my own soldering, thanks for the support as always
@@PlumbLikeTom I would trust your soldering over an isolating valve any day!
Are you not self employed tom?? I’m confused about your office staff pulling i to u from pillar to post
I work for my families business, I look after the plumbing side but ultimately I have to do what I'm told when jobs come in, I don't normally complain but I had just worked 19 hour day and was tired, thanks for watching, have a great weekend
Oh I see. Makes sense. Yeah burn out is real, I always have great plans of working long hours to get work done but it soon catches up with you, especially with a young family at home. Keep up the good work.
It Is tough at times, I love the job though, I used to be able to work 24 hours a day and not feel it but now it does get me, I must be getting old
Stuff the job get to the pub ❤
Are you not self employed?? If your not your a wasted talent
I work for my families construction business, my job is to try to look after the plumbing side, have a great weekend
Love watching your videos Tom keep em coming m8t 👍👍👍
Thanks for the support as always mate, have a great weekend 👍