Emergengy Garage Door opening - Door Won’t Open
HTML-код
- Опубликовано: 21 окт 2024
- Broken Torsion Spring with the cables off. Garage door repair in Claremont California.
In this video you’ll also see how we properly choose the torsion spring based on the garage door itself and no guesswork. This is an exclusive system for the perfect balance of a garage door.
aqgd.net
909-626-7200
Well done! My sister in laws garage held her car hostage on a Saturday. This and my two teenage sons will get it done in no time.
The old school little giant collapsing ladders can hold up to or over 400lbs if you can get the door open even momentarily and get the ladder up under it you can get the door wedged open from the side. I remember when one of our springs and the operator broke and I as a 12 year old kid had to open the door by hand, that was a fun week.
Good thing you are wearing steel toe boots. All garage door repair man should steel toe boots
Nicely done bro. the other day I was with my friends and worked on installing garage doors and the small one had 6 panels, was approximately 8 x 16 and 240 lbs, we hadn't put the springs or cables on yet and I was able to completely lift that door dead weight.
Boom! Now that’s a real Savage right there. :-) Good on you!
@@dericscott4577ruclips.net/video/I31_Wnp5o10/видео.html ruclips.net/video/9GELh9cw2ss/видео.html ruclips.net/video/dS1eW3ZAfJg/видео.html ruclips.net/video/scuaF0K3y20/видео.html
Thank you so much. You just saved my life lol
Bro! Great to see you making videos. I just subscribed. What's your opinion on using the motor to help lifting the dead weight of the door?
Good question, if you have the strength to lift it without the opener then do so. The whole point is to get the door to go up evenly on both sides so that it doesn’t bind and that is best done by hand.
Yet of course, if the door is a little too heavy to handle, the opener will definitely help you out. Great question!
We have a 12' storm rated door. Both cables snapped when we bumped the edge of the door putting the RV inside. Now the RV is trapped with mere inches between it and the door. Worse, the width of the RV is so that there's only about 2 feet that anyone can get in on either side. Garage door guy guessed it's about a 500 pound door. NOW what do you recommend? Definitely need some ideas. Thank you!
OMG , can you just do it already sheesh
Its like he had the coffee jitters
he’s tryna teach, tf is wrong w u
This helped me out a lot. Thanks man!
My pleasure :-)
That's great but my door is an old HEAVY steel door that probably weigh almost double. How can I lift it all the way up to change the pulleys and cables?
Well if the springs are broken, you’ll have to lift it the way I showed him the video and then keep it open with either a board to hold it up or some vice grips to clamp on the track to keep it from coming down. You can change the pulleys and cables this way, but you simply cannot install springs this way because the springs need to stretch it out in order to wind back up as you close the door. If you try to put the springs on with the door open, the door will bind as you try to close it.
Hope that helps. :-)
Soon later you find out exactly where L4-L5 is located🚑
Jesus stop talking and lift the door
if u just lsn, u won’t get urself hurt 💀
You may have to loosen the top rollers and pull back. The door could hit the drywall. The door opener pulls the top panel back. Push on the top roller.
FYI mortal men, clamp the vise grips on the flat half of the rail, not the curved part and possibly distort the track.
A guy on the loading dock was telling me he did this to get a lady's car out and he ripped a bicep muscle or something along those lines.
I have never seen so much talking... bro just do it
Haha. Thx
Very Helpful Sir Thabks.
Thank you. Any other questions, let me know :-)
You pulled the cord to unlock the door. I can't figure out how to unlock it. I now know why it was impossible to lift it's because it's locked.
Most important part for me was how to unlatch the garage door opener with that red handle and your flew past that and never went back to it. I watched for five minutes before I realized that you weren’t going to talk about that red handle 🥴
So sorry, in most cases, you only need to pull strait down to release.
Sometimes, it’s reconnecting that is sometimes more difficult.
So many unnecessary, common sense details. My god I miss the dislike counter.
Sounds like hate,,, even when we are trying to help. No prob, there is no pleasing everyone.
Oh, then why watch just to shade?
The metal arm broke am I out of luck
Thanks
Thank you Henry :-)
Davidson power
👍
First of all, you have to be 6'2". That will help. ha.
You need to call a professional ! Buy a wire gauge
Folks. NEVER EVER do what this guy just did. Use your brain and common leverage lifting procedures.
Call repair men. Worth every penny.
@@zeenaabdura5686 Nah, be independent and learn something.
OMG, 5 minutes job, you talked for 20 minutes.
Too much talking….Geez! Not helpful at all!!!!
u seem like someone that didn’t do well in school