Woodturning, Glue Up and Milliput, Oh My!
HTML-код
- Опубликовано: 10 сен 2024
- This weeks project I glue up maple and walnut woods and turn a vase. I add 3 lines of milliput to decorate the vase.
********************************************************************
to support the channel and help create more content, consider supporting via:
Patreon: / 2835716
********************************************************************
Some tools and equipment I use and recommend:
Belt sander cleaning stick: amzn.to/2L984NG
Micro-mesh pads: amzn.to/2xDBRGP
Larger Micromesh Pads: amzn.to/2HrRN44
Hut High Gloss Pen Polish: amzn.to/2JxxWB1
Carter and Son Perfect Sphere: www.carterprod....
Woodturning Tools and Equipment:
Laguna Revo 1836 Lathe: amzn.to/2YOreMN
Robert Sorby Turning Tools: amzn.to/2Y0TA74
Carter and Son 5/8 Bowl Gouge: amzn.to/2W5Mn3S
Carter and Son Skew Chisel: amzn.to/32dj8zf
Ron Brown's Universal Setting Jig (for getting proper degrees when sharpening tools)
amzn.to/2W5HVlo
Easy Wood Tools: amzn.to/2Y1bGWE
Face Shield: amzn.to/2Fhoi4j
Center Finder (great tool): amzn.to/2W4wt9J
Bullseye Round Center Finder 10": amzn.to/2FdR19f
Wood Moisture Meter: amzn.to/2OaRqx8
Jet Air Filter for Shop - A MUST have: amzn.to/2TNE1RS
Bowl Sander Kit (I use this all the time, great product): amzn.to/2Y2wA7K
My newest addition - Dewalt Planer - LOVE it!: amzn.to/2FitIMD
Resin and Pigments:
Total Boat Resin: amzn.to/2XVmjKm
Total Boat Resin Quart Kit: amzn.to/2LcKPRO
Black Diamond Mica Powder Pigments: amzn.to/2XVn4Dc
Pearl Ex Powdered Pigment - Micropearl: amzn.to/2Y5BY9Z
Pearl Ex Powdered Pigment - Emerald: amzn.to/2Y0nEQl
Pearl Ex Pigments Metallics (Set of 6): amzn.to/2FdkMa7
Pearl Ex Pigments (Set of 32): amzn.to/2O7r3Ii
Tuck Tape (good for resin work, will not stick): amzn.to/2ubOVRX
Porter Cable Heat Gun (To pop resin bubbles): amzn.to/2UA1GBo
Sandpaper: amzn.to/2Ff4gYc
Milliput: amzn.to/2Y4aHEP
Starbond CA Glue: amzn.to/2O6wszi
Starbond CA Glue Heavy Thin: amzn.to/2HuL1dW
Other:
Sanding Sealer (awesome stuff!): amzn.to/2u97tlY
Dewalt Orbital Sander: amzn.to/2T8TpTz
Workbench Kit (easy build and sturdy): amzn.to/2OhFXMt
Nova Chuck - Super Nova: amzn.to/2FgQa8J
The BEST paper towels for woodturning!: amzn.to/2O9Fb43
Anchorseal 2 - Green Wood Sealer: amzn.to/2HEHeeH
Montana Crackle Spray Paint - Black: amzn.to/2LD2cP6
Montana Metallic Effect Spray Paint - Black: amzn.to/2GYxJ8G
Acks Sanding Paste: www.ackswoodpa...
Milliput - Black: amzn.to/2ucLYAJ
Sandpaper: amzn.to/2Ff4gYc
Milliput: amzn.to/2Y4aHEP
Conway Air Purifier (I use this in my house, in case any allergens come up from basement shop. This thing is great, especially if you or someone you live with has any allergies)
amzn.to/2TdWXUm
Contemporary Woodturning Book (great book): amzn.to/2UFuhp9
Video Equipment:
Canon DSLR for Recording Videos (a great camera too!): amzn.to/2T7eYE5
Joby Grip iPhone Holder for filming: amzn.to/2FiNTdp
Mic Stand (I use for mounting iphone /joby grip when filming--great product and not expensive)
amzn.to/2O8cXXl
Thread adapter for mic stand (to mount iphone): amzn.to/2TeT69M
Light for filming - 18-inch ring light - dimmable: amzn.to/2Y3n4B9
More ways to follow PF Woodturning:
Etsy: www.etsy.com/s...
Instagram: / pfwoodturning
Facebook: / pfwoodturning
Twitter: pfwoodturning
~-~~-~~~-~~-~
Please watch: "Woodturning | Walnut Salad Bowl (cracks filled with resin!!)"
• Woodturning | Walnut S...
~-~~-~~~-~~-~
It's always great to see what you come up with. You're one smart lady. Love the project.👍
Thanks, Joel!
Really like this. Had to watch must have missed it. Thank You
Thanks 😊
Very clever design and execution.
Thank you very much!
Very nice Peggy I’m glad you made 3 rings even numbers never work so well
Yes, you are so right!
One of your best
Thank you!
Really beautiful 💜
Thanks, Connie!
A little barrel of Rum, Beautiful.
Rum!!! Yay!!!!!!!!!!
Very pretty love it
Thank you!
Very beautiful.
Many many thanks
Very nice work Peg.
Dick Untch thank you!
Very nice!!
Thanks, Todd!
Beautiful piece
Thanks, Dave!
Very nice like the color
Thanks!!
Very nice. .
Thanks, Mike!
Awesome piece Peggy, like the milliput. I've used it many times like it alot easy to use, thanks for sharing.
Gary Thomas thanks, Gary!
I like the use of Milliput in projects, but I wouldn’t say it is cheap to use. It’s a good product, adds some snap to a project, but increases what you have to charge to make a buck.! Keep on Turning.
Thanks, Mark!
Hi Peggy, you have some amazing ideas. A most enjoyable turning. Thank you. 🇬🇧
Thanks, Kevin! :-)
very original and very beautiful result!!
Thank you!!
Another Dave from across the pond here. Great result but thought I'd gone colour blind until i saw the last comment. Great result thanks for sharing
Ha! Thanks!
Really beautiful vase Peggy!!! Really love the Milliput it's so versatile and gives a great effect 👍👍👍
Thanks, Gavin!
Hey Peggy! Super creative project! Fun to see you at work. Cheers!
Thanks much!
Very nice. Like the colors and styling.👍🏻
Thanks, Valerie!
Another great project, keep up the awesome projects....Greg👍
Thanks, Greg!
Nicely done! I liked the milliput, Looked easy to work with and turned out great! Excellent bowl!
Thanks!!!
Thanks for the video Peggy. If you are interested, they have silicon brushes for spreading glue. You don't have to worry about cleaning begore the glue dries, it just breaks off. I have even use basting brushes on large wood pieces. Do you need carbide tools to remove milliput? Thanks.
Yeah, I've been meaning to get one of those silicone brushes. You can use carbide or regular tools to remove milliput---I've used both. If it's a regular/traditional tool, just make sure it's recently sharpened. Thanks for watching!
Nice work, Peggy!
Thanks, Rick!
Great shape and use of milliput! You’ve just inspired me to have a try at it!
Thanks, Shaun. I love milliput, give it a go, you'll be glad you did!
It's beautiful! I loved it!
Thanks, Andrea!
Beautiful Piece 😊
Thanks, Victor!
Very lovely!
Thanks, Carol!
Craftswoman!!
Thank you!
Beautiful.
Thanks!
That came out quite well. I like it.
Thanks much!
What a stunning piece Peggy, I love the contrasting colours and grains of the wood. Along with the milluput gorgeous. Peace out ✌️🙏
Thanks, Andrew!
Looks nice, Peggy. The milliput is a great accent to compliment the walnut. And yes, I caught your shoutout to The Wizard of Oz in the video title.
Thanks, William! Yes, one of the greatest movies!
I have to say that it turned out just stunning you done great Peggy on this one ✌️✌️
Thank you, Donald!
Nice turning with glue and milliput.
Thanks much!
Very nice piece Peggy. I like the coin that you developed, that brings out your professional image. Have a great weekend and week.
Thanks, David!!
You're welcome Peggy. Enjoy your week.
Prachtig👏
Thanks!
like the way you come up with your color scheme
Thank you!
The vase looks very nice but I will offer a couple of suggestions. First, if you are going to glue up blanks like this, make sure the grain is running in the same direction. Wood moving in opposite directions will cause joint failure. Next, have you considered segmented turning? You wouldn’t waste as much wood
Thanks, Greg. No, I haven't considered segmented turning (yet), but I do see it in my future! Thanks for watching!
PF Woodturning search for Jerry Bennett and a wedgie sled. This will make your I introduction to segmented turning much easier
Awesome video 👍 really enjoyed watching this my friend 😊
Thank you!
Hi Peggy Dave Here from across the pond nice job i'm still learning (two years so far) one point when you left it to dry it was white blue blue on our return it was white blue white two vases or opps do it again still love the vase.
I was bemused by that too....but the final piece is lovely 😊
Good eye, Dave! I changed my mind after the fact and changed the color (but forgot to film it)
Ok, it wasnt just me then. Lovely vase, finish suits it well
Mark
Looks great, i cant wait to try it out on my lathe sometime 😉
Thanks! Appreciate it!
I really like that Mrs. Peggy Those color's pop really well and it's just beautiful great job. God Bless and can't wait to see whats next
Thanks much!
Quick question - where are you finding the teal colored milliput? Our local HobbyLobby only has white, never any other colors., not even black.
Hi there. Milliput actually sent it to me to try. It might not be on the US markets yet. You can check the milliput website. It's not on Amazon yet.
Hey Love your videos, Im kinda new to turning but have been doing custom wood working for years. Little suggestion on your glue up. Notice how the pieces move a lot until the glue starts to hold, if you sprinkle a little table salt on the glue before adding the next piece. The salt will stop the sliding and does not effect the finished product
Cool, thanks for the tip!
Okay what happen you start out white, teal, teal. but ended with white, teal, white? It looks great.
Good eye! I changed it after the fact! Thanks for watching!
What happened to the bottom of it? It was teal, then it cut and came back as white after working it over.
Good eye! I ending up changing it.
@@PFWoodturning like your work though, it's pretty cool.
Another great project! Where did you get the name coin you use on the bottom?
Hi Amy, I don't recall where I got the coin. And, I wouldn't recommend it anyway, as it isn't very good quality. I'm looking for a better, more substantial one.
Why do you mix alcohol with the sealer?
Something I learned along the way, I can't remember from whom or exactly why...
I can't find the blue Milliput you used on your Amazon links?
It's not on amazon yet. Try going to the milliput website at www.milliput.com/
Or here at www.yandles.co.uk/turquoise-blue-milliput/p24588
It looks great! I wish I had access to such great woods. You did remind me though, I have some Milliput in a draw, I’d better check and see if it’s still good and make something with it.
Thanks!!
A touch of the tropics? #beachhousedecor 😎
Quite possibly! Thanks for watching!
Hi Peggy. I like your videos very much. And your woodturning results are always amazing. I want to ask you where you got this coins from? Are they personalized? I'm searching for so long for such emblems you used on the bottom. Maybe you can help me to find some?! Greetings from Germany. 😊
Thanks, Tobias. I don't recall where I got these coins, but I wouldn't recommend them anyway, they are plastic and the logo isn't that crisp. I am also looking for another vendor to make some.
You spliced 2 different projects. On the original project, you had 2 teal stripes-middle and bottom, the bottom piece of wood was very light-almost white, and the top piece of wood had not been touched. Then about half-way thru you stated you did record the removal of the 1st 2 milliput stripes. The bottom wood is darker now, the bottom stripe is white instead of teal and the top of the project, the dark wood has been completely turned and sanded. Why do this without telling us you changed projects?
I ended up turning it off for symmetry purposes.
Nice Job Peggy, I like very much. I wish you had a site to purchase if you sell these?
I do, but this one isn't listed. My etsy link is in video description! Thanks!
great video Miss Peggy ...how much time do you have in a project ???
Thanks, Bryan! It really depends on the project. I would say anywhere between 4-10 hours.
Beautiful piece with the milliput and walnut! I'm a little confused though, how did the bottom stripe turn from teal to white? Does milliput do that sometimes?
Thanks! Good eye--- changed my mind halfway through.
Great choice!
Looks great! Really like the color and wood selection. Keep it up.
Thank you!!
A dash of salt on the glue will prevent the slipping.
Someone else mentioned that too, I will definitely have to try that trick! Thanks.
Hehe you changed the one blue colour :-) Nice Job
Jimmy Holm Sørensen yes indeed! Thanks for watching! 😎
What an absolute waste of the walnut board
Rodney Cambell the left over pieces get used on other projects. No waste.
Try being in the same room as the mic the next time... Can't hear a word you're saying :-/
Thanks for watching.