Simple Fix for a Boat Power Trim Not going Up or Down (Boat Trim Not Working) 2 Stroke
HTML-код
- Опубликовано: 28 авг 2024
- Replacing the Relay on a Johnson 120 ‘96 Model. There’s 2 boxes and 2 plugs. One is for the “trim down” and the other is “trim up”. If one or both of these go bad it will disable your trim. Always check these boxes first before you put it in the shop. This guy probably saved me hundreds of dollars.
Here’s the link for the part, very inexpensive.
YIXIN 2 Pcs Power Trim and Tilt Relay 582195 582472 582473 586147 584416 586224 18-5705 Compatible With Johnson Evinrude OMC Outboard Marine Corp www.amazon.com...
Thank you for the video ..saved me a trip to the mechanic and saved me $$$$..too.
It worked 100% on my 225 ocean runner...took the old ones to NAPA and found me alternatives....
Keep the usefully videos flowing...regards and God bless....
To get motor to move where you need it to in "emergency", I believe you can swap the solenoids to get the motor to trim up or down (assuming 1 of your 2 solenoids is good).
Thanks for this video. I have a old 125 tracker by mercury and this was my fix! You saved me some money with this quick $20 part swap and now I have trim again!
Very cool, happy it worked for ya!
Where did you get the solenoid? I have the same problem
@@paulriendeau1971 a local boat shop that handled Mercs
Thank you. I have an Evinrude 175 and this vid fixed my problem!!
It just happened to me today I guess thanks to you I don't have to pay a mechanic
Happening to my 225 vindicator. Go up to far it won’t come back down besides relief valve. Think fluid is low for now.
But thinking to do your trick anyways
Thanks I’m going to give this a try
Thank you 125 Murc same thing happened to me
My trim goes up and down from the throttle but only goes up from the motor. Any idea as to why it won’t go down from the motor?
Mine is the other way around?
Motor trim works up and down but throttle trim only works up?
Any ideas?
Hello!
I have problems too with my downtrim...the uptrim works good,down doesn't nd when I push down I can't here any click apart from the click from the button...it could be the same problem u had?
Thank u nd greetings from Romania, Europe!!!
Thanks and I wish you much luck. Could be a few things, starting from the simplest first. Relay, relay harness, wiring, or trim motor.
@@cwulfoutdoors318 thank u for responding me so fast...I would say it s a relay coz it s working good uptrimming...I will try tomorrow nd I will let here a respons for the others which have the same issue!!!
Stay blessed!!!
You too, and thanks for contributing to the discussion
I can hear my tilt motor wend I push up or down but it won’t move
When I press the trim button all I hear is it clicking in the rely did yours click
Yes that’s exactly what it was doing
Mine doesn’t work on the throttle
I don't have any working trim the motor doesn't buzz at all the trim is dead what may it be I'm new boat guy? Hope you can comment give me an idea on what it might b
Easy fix might be a bad connection to the battery, or a switch. If theirs two switches then it’s not that. Could possibly be the power trim motor.
Tk you cwulf
Thats not a solinoid, its a Relay
@@richshadwell5561 yeah that’s what the guy told me it was a solenoid but after researching it I found out it was a relay. Link is in the description. Thanks for the reply.
@@cwulfoutdoors318 I switched the relays around and it does the same thing so evidently its not a relay !
Mine is doing the opposite....goes down but not up
Try swapping them out
How do you test them?
I just troubleshoot them by swapping them with one that I know works and the switch works as well. Also will use both the switch on my controller and the one on the outboard itself. Mainly just trial and error but I’m sure there’s probably other ways that more electronically inclined people know.
Both mine are “clicking” but won’t raise or lower
Might be a wiring issue and not a relay issue
Well thanks dude.
hey bud, my downtrim isnt working, but uptrim is, evinrude 50hp. working fine up until i hit a sandbar & found i have corroded wires that have been replaced. Still no downtilt but have uptilt. kindve stumped. Still possible relay?
Hello and thanks for the question. You can test if it’s a relay by swapping them and seeing if the down trim is working and the up is not. If still the same outcome it might be the harness. I have a video after this one where I replaced that part. Good luck, hope it works.
Same issue with same motor