How To Install and Program A Garage Door Opener Keypad
HTML-код
- Опубликовано: 24 авг 2016
- Be sure to hit the SUBSCRIBE button and then click the bell so you don't miss any future videos.
I should have done this a long time ago but we are so happy to have it installed now. We go for walks in the evenings and I always worried about leaving the garage open but didn't want to carry my house keys with us. This allows us to close the garage and reenter when we return home!
You can use the Amazon Affiliate* Links below to buy supplies for your repairs:
Liftmaster Keypad Shown in Video (single door/code): amzn.to/2HhNBHh
Liftmaster Keypad (multiple doors/codes): amzn.to/3m4prih
Genie Brand Keypad: amzn.to/3lZssjO
Genie Aladdin SMART Keypad: amzn.to/2XxHoJt
Programming Garage Door Remotes - • EASY FIX: Garage Door ...
Chamberlain Liftmaster Remote: amzn.to/3dHHW9m
Genie Remote: amzn.to/35f0E4u
Noisy Garage Door Lubrication - • EASY: How to Lubricate...
B’Laster Silicone: amzn.to/3kh9HrE
3 in 1 Garage Door Lube - amzn.to/3o6zKEp
WD-40 SILICONE (not regular): amzn.to/3o5dmLP
Liquid Wrench White Lithium: amzn.to/3o8BEo6
Garage Door Not Opening or Intermittent Issue - • EASY: Garage Door Open...
Genie Garage Door Opener Bulb (4 pack) - amzn.to/37lUBxC
Genie Garage Door Opener Bulb (single) - amzn.to/2IFTr5E
My description includes referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support! 
Хобби
You can use the Amazon Affiliate* Links below to buy supplies for your repairs:
Liftmaster Keypad Shown in Video (single door/code): amzn.to/2HhNBHh
Liftmaster Keypad (multiple doors/codes): amzn.to/3m4prih
Genie Brand Keypad: amzn.to/3lZssjO
Genie Aladdin SMART Keypad: amzn.to/2XxHoJt
*My description and comments may include referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!*
Thanks for the step by step instruction. I went to my big box store, purchased one, and had it set up in no time. I wish I would have known about this years ago!
TravelDad YT They are so easy to install and may be my favorite home upgrade!
Yes you saved our day! . We have the same garage door opener as you , yet we had already purchased the liftmaster 878. The graphic reference on the instructions indicated our learn button was red, but,,, here you called it purple. When we followed the instructions for the purple learn button,,, it finally worked!
Great video. Literally programed it as you were speaking the first time. Thank you!
That’s great! It’s easy once you know the right order!
Thanks bud! This video 100% helped me. I just bought a new keypad and couldn’t get it to work for nothing. I was trying the way I did my first one from years ago. The new one was different, it have some extra steps. Anyway, thanks.👍🏾
I’m glad you were able to get it working!
I was stuck with the keypad not working for a week. I finally found this video and got it to work first try. I have liftmaster la400; yellow learn button. So mine is press once. Thanks for this information.
Rob Cortez That’s great news. I’m glad you were able to get yours working again.
Really well done. Thank you!
Thank you for the kind comment. Be sure to subscribe!
Thank you so much for this video! Yours was more detailed and extremely helpful. I finally got mine programmed
Thank you so much the instructions don’t explain it good enough you’re a lifesaver
You are welcome. The instructions are difficult to follow so that’s one reason I made the video.
Your video based on the instructions printed on the keypad door showed that the instructions printed on the paperwork in the package were wrong. I viewed your video only after wasting an hour following the wrong instructions. THANKS!! Works great now.
36736fps I’m glad you found my video and were able to get it working.
This video was a lifesaver I couldn't figure out my garage keypad but I happened to find this video and you had the exact same keypad and garage opener as I did. Appreciate ya 💪
Great! I’m glad you found the video!
Very detail and illustrative video. Love it.
I’m glad you found it helpful
Excellent, excellent video!!! Thank you so much.
Linda Barnes You are welcome. I’m glad you found it helpful.
I'm definitively going to try this!
April Brown Good! This is one of our favorite home upgrades.
This was very helpful thank you so much!
Alisa Coleman You are very welcome. Enjoy your awesome addition!
Thanks so much for this video my enter button works when its wants to we thought its was wired also very helpful video.
wii Since they are fairly cheap, you can just replace the opener if a button isn’t working.
Great video. Very informative.
Thank you for the kind words.
Thank you so much I did it a couple times but I you help me thank you so much so I have my keypad yay thank you
Thank you every much awesome video .
You are welcome. I’m glad you found it helpful.
Well done!
Anthony Thank you! Be sure to subscribe!
Awsome, thank you!
You are welcome. Be sure to subscribe!
just did it. thanks a lot ! you just saved me 400 bucks they tried to charge me for that.
carlos velarde That’s crazy! Do you want my PayPal? I will just take half of what they were asking! Haha.
@@TightWadDIY haha i know. people take advantage sometimes.
Thank you!!! This is going to save me about $100
C Lynn Great! I’ll take half...need my Venmo? Haha.
TightWadDIY 😉
I Love Keypads
Thank you
Atef Eldahshoury You are welcome. Enjoy your new toy!
Great Video
Thanks Bill!
That was incredibly easy I thought I would need to wire it thank you for sharing.
Yes! It’s so easy!
I tried something different and took the keypad off and brought it to the opener with the door shut and sure enough, it worked the very first time, Thank You for your concern. I would like to tell you something that you might have already picked up on youtube but it sure helped me when I found this out. My remote in the car stopped working unless I drove close to the garage and I would have to click it over and over sometimes the door would open and sometimes it wouldn't and then pretty soon my wife's remote started doing the same thing, I looked on RUclips and found out that some LED light bulbs cause interference with the opener and so I went back to the incandescent bulbs and the Opener worked like normal, I guess some CFL's will work also. I went online and found out that Genie makes LED bulbs that have shielding so as not to cause that kind of interference, I also checked online and found another company that makes LED bulbs for the Garage Door Opener but they are very expensive. I just thought if anybody had put LED's in their openers and they started having this trouble now they know it is the bulbs, not the battery or the remote.
Robert Klein I’m glad you discovered your issue. I actually have a video discussing the issue with LED bulbs and even have a follow up recommending the Genie bulbs. Thanks for sharing that information here as well. People like you make the RUclips community even more valuable.
Thank you.
Kittyhammertoe100 You are welcome. Im glad you found the video helpful.
Hey I have a garage with two doors. Do i need two key panels for each, or do they require seperate pins?
Thanks! I can't believe I thought the keypad was wired in somehow so I never changed it when it broke! Yeah I admitted it...smh
Caiden Thom Haha. Don't be ashamed. That's the same reason I never installed one until now! It's one of those things you really just don't think about.
Me too!
Caiden T some are wired in.
I thought so too😂
Thanks for the great video! I have a similar garage door opener, and the previous owner never installed a keypad. I just ordered the 877MAX keypad from Amazon. Quick question: Will I need to reprogram the remotes in the cars?
ddk80 You are going to love it! This new keypad and programming will not affect the other remotes you have. Let me know if you run into any issues.
TightWadRepairs
I installed the garage door opener last night. It took me 10 minutes from start to finish, using pilot holes for the screws! It was so easy! Thanks again!
ddk80 Awesome. You are going to love it!
Thank you GO DAWGS!!!
You’re welcome and Go Dawgs!
After 11 years my keypad went out. I was going to have my garage door guy come over to install a new one. This saves me that expense and a $40 Amazon purchase will fix it!
Jay G. It’s way easier than I ever thought it was! I couldn’t believe I went so long without one.
@@TightWadDIY Installed today! Only problem I had was that I wasn't pressing the enter button fast enough for the purple code button! Your video confirmed what I was doing wrong! Thanks so much!
Jay G. Great! It’s such a helpful addition!
Thanks a lot
My pleasure!
The 877max keypad I received does not have a hole for the bottom screw. It is solid plastic at the bottom (no hole). It came with 2 screws for mounting. Just mounting with the top screw doesn't seem very stable. Is something wrong with this unit?
Thanks! Go Dawgs!
You bet
Thank you so much for sharing this useful video 💯👍💫🙏🤑
You are most welcome!
Thanks for the instructions. When I press and hold the pound and star button on my remote, it does not blink it stay solid. How do I fix that?
Sorry. Every one is different. Read your instructions.
Love it
Great! I’m glad you found it helpful!
Thanks.
My pleasure!
Thank you...
Thx a lot, my instructions said nothing about clicking pound after password.
I had no clue what I was doing wrong
I’m glad you found the video! Thanks for taking time to leave a comment. Be sure to subscribe and ring the bell.
you can also just press the enter button without entering the pin code to close the door
If you have problems with this. Take the battery out of it and wait 30 seconds and put it back in. Then reprogram it again. That worked for me.
Thanks for adding tips for others. I appreciate you.
Ok, I don't know why I always assumed these had to be wired directly into the garage opener itself. Of course they're wireless. Going to install one tomorrow.
Yes! Common misconception.
We ended up exchanging this model for the slimmer version ruclips.net/user/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
For future note you need the code to open the door but the enter key and close the garage door as one but close is on my default but can be disabled
Yep!
if you have two garage door openers, can you set 2 set of pins for each garage door opener ?
Ian W Great question. I don't know but I think you could get one keypad to work with both openers. The keypad simply emits a frequency based on the code keyed in. The keypad doesn't know the code for the opener. You should be able to set each opener separately.
thanks for the quick response.
Ian W You are welcome. Please report back and let me know if it works. I can't test the theory since I only have one opener.
sure, i will install one during summer, and let you know.
I am having all kinds of trouble trying to get the battery cover back on. Will not snap back into place. Any suggestions?
Sorry. They all fit differently.
I wasn't able to see the 4 digit code. Can you please publish that? I don't want to have to waste time guessing, when I'm in your neighborhood.
Jeff Johnson Haha. We already had to change it! Cleaning lady went cray cray.
TightWadRepairs sorry... couldn't resist being a smarty aleck! Good video tutorial! Sorry about the cray cray!
😂😂😂
Not a good idea to show or tell any passwords or codes to make sure it’s secure because what if a burglar watches this video and breaks in your house?
In fact he covered it with his hand when he put in the code so it was more secure
Can the keypad be programmed to open 2 doors.? Good vid.
Redwing Detroit This model only stores one key code. There are others that allow storage of multiple keys.
This Amazon Affiliate link will take you to a Liftmaster keypad that will work with multiple doors. amzn.to/2LKMSyf
TightWadDIY thank you very much.
where does a person buy a keyless garage door opener pad that works with a overhead door opener model 696CD/B
Debbie Evans I purchased mine on Amazon.
I installed and programmed new lift master key pad on lift master garage door opener. However, now my remote doesn't work. So I linked my remote and now the key pad doesn't work with the assigned PIN. What do I need to do to get both to work?
Programming one shouldn’t change the other. I’m not sure what is going on with it.
@@TightWadDIY
Quick question I did everything I was supposed to and I have a purple button LiftMaster professional formula one or formula I I still can’t program it not sure what I’m doing wrong can you walk me through again?
What light starts blinking? also how do you get a PIN number? Not really explained well.
The light bulb on the door opener motor starts blinking. You make up your own pin. Any 4 digit number.
@@TightWadDIY Awesome Thank you
That's a noisy door. You might want to get your tracks aligned. It'll be much quieter. :)
nonh8nsk8r Thanks for the tip. I will have to check that out.
How far you can install the keypad from the garage door opener?
I imagine it can be pretty far away. Think about how far away your car remote works.
What do you do when the pad they gave you has two screws but there is no where to screw the botton one into
Remove the battery cover and see if it goes in there.
@@TightWadDIY Nothing in there to put a screw through!
@@TightWadDIY It also does not close when you follow direction to hit enter enter
@@suehayes702 Sorry. Im not sure what to tell you without seeing it.
After installing this wireless unit. the transmitters in my car will not work. I can always have one working but not the other.
brian keith Did you happen to change the bulbs in your motor too? LED bulbs are known to cause interference.
You don’t have to cover your hand to secret your code , you still reset a new number easily
Thanks for clarifying.
Crap I tried to reset the pin entry on mine now it won’t open at all and my wife has to go to work in like4 hours, I’m nervous
bliztix oh no! Did you get it fixed? Every garage door has a manual over ride. There should be a red handle you can pull down and the door will open by hand.
Welp looks like I’m spending the night outside
I push the learn button to program wireless keypad but learn button stays on
my enter button on my key pad isnt working how do I repair it?
I can’t say for sure. You could attempt to disassemble it and see if there is some debris behind the button. Otherwise you will likely just need to replace it.
Thanks,instructions didn’t say to hit # button.only inside cover.
Ray Pitt I’m glad you found the video helpful. Thank you for taking the time to comment.
I have a remote keypad that was working perfectly and suddenly stop working. I replace the battery but still not working. My open door garage is a Craftsman
titush23 Do your other garage remotes still work fine?
Yes! the remotes that we have on the cars work fine.
titush23 Have you tried resetting it and programming it again?
Thanks for your answer. Yes I did it with all the devices . The devices for the cars works fine. The keypad does not have any light so I believe and need to buy a new one, right?
titush23 Yes. It sounds like your garage door keypad is broken.
For next time consider not hiding any steps... some people can get confused. But overall thanks for the helpful video
Fuad David Thank you for the feedback. Which steps were hidden other than entering my code?
I did everything you showed in your video and it still will not program i tried three time and still nothing the motor will not even pick this remote up at all how can I fix this or is it best I just buy a new program keyboard?
Eternal U Burgess This may sounds simple but did you try new batteries? It could light up with a weak battery but still not have enough power to transmit a strong enough signal.
Why do I never see these videos showing someone testing the Enter button after the programming, I have your exact keypad and opener with the purple learn button and do exactly as you have shown and when done anyone from the outside can push only the Enter button and the door will open, I have read in the reviews on Amazon and find others have the same problem but you see everyone only assume that the keypad is working correctly because they will only enter their code first, I ask everyone to please after programming please test the enter button first and some will find that the door will open and the enter code is useless and anyone can get into your garage.
Robert Klein They will close with just the enter button but should only open with the code. I suggest you reprogram yours if it opens without the code.
@@TightWadDIY I have programmed it over and over and yet it opens with the enter button both ways it has made me so frustrated and I do see that I am not the only one that has this problem. I will say that because I knew there was this problem when I first got the keypad after programming it I did check it and it worked but since it lost it programming I have not been able to get it to work again. I will say this much it is always nice when someone puts a video on youtube it is nice when the person responds with a reply and that is very commendable and I also am very aware that when a person has many many comments coming to their website it would be an impossibility to respond to everyone but thank you very much.
Robert Klein I do my best to reply to all comments and try to offer helpful information. I’m sure this is a frustrating situation. Are you saying you can’t get it to program and work at all anymore? You may just have a faulty device that needs to be replaced. How old is it? Have you tried reaching out to Liftmaster?
what if you don't have a * or # button?
William Gibson You must have a different brand or model. What brand and model do you have?
TightWadRepairs keypad doesn't have anything identifiable, the opener is a Chamberlain electrolift superglide
William Gibson Check inside the battery compartment for a model number. If you can't find one I don't think I can be of any assistance.
TightWadRepairs Liftmaster model 031B0356
William Gibson Try this link. www.fixya.com/support/t17085044-reprogram_garage_door_opener_wireless
I don't like how any schmoe can just come up, take the battery out, and leave anyone counting on this panel for access out of luck. They should have designed the battery cover so that it was at least secured by the bottom screw hole. It wouldn't be foolproof, but still way more secure than making it accessible to anyone who comes along.
Do you know how many lives you have saved?
I sure hope a lot! Haha.
well after two years of owning that brand of pin pad opener, it glitched out and locked me outside.
Danny Pops Did you replace the battery? The same thing happened to us and that’s all it was.
@@TightWadDIY hmm, no. I think what I did is somehow reset the code accidentally when I was typing it in. But that usually takes two simultaneous presses.
Danny Pops Hopefully you were able to get it reset correctly again.
lol @ 5:07..... Every time
nodd85 Crappy screws with a full point! Haha.
My garage door is opening on its own what do I do
every single unit is different no wonder they don't work WTF
There are about three major brands. Just stay within the same brand and you are usually good. The only issue is when you have really old equipment.
Thank you.
You are very welcome.
Thank you
You’re welcome!