Clicker Keypad ProgramTo Smart/ learn Button-Type4
HTML-код
- Опубликовано: 18 окт 2014
- How to program your Clicker Universal Wireless Keyless Entry to a garage door opener that has a smart/learn button. Type 4 in the instruction manual. You can download@ gsoverheadsystems.com under garage door openers-sub page, instruction manuals. You will need 1. a 4 digit pin or code 2. opener ID from instruction sheet, & 3. Locate the program button on your opener.
Хобби
This video probably save me four hours of my life
I watched 5 videos. This was the only one that showed the correct sequence to push in order to successfully program my opener.
Thank you.
THe only video that helped me among the 5 I have viewed. Thanks for the clear instructions.
Same here
Thank you so much!!! I watched countless videos in attempt to reset my garage code. No luck until I came across this video. I’m so grateful for your video. Huge help and you made the directions very easy to understand and follow. You are amazing!!!
Thank you once I removed the keypad to confirm the model number and searched the internet for the correct manual for the ID# this was a breeze 👌🏽 👌🏽
First time ever commenting on a RUclips video... But this was exactly what I was looking for. Inherited a house with this keypad (no Enter button) and this was the only video I could find that gave me ALL of the steps. Finding the Opener ID was critical. THANK YOU!
I come back to this video every time my remote loses signal. thanks so much for taking the time to make this video!
Best garage programming video I have ever found!!!
My favorite video of all time! Every time my battery dies I have to watch this to reprogram it🤣🤣🤣👊🏽🤟🏽
Your video was very clear and helpful! After watching this, my husband and I looked at each other like, DUH! Thank you so much for your help!
Just moved into a new home and used this video to reset the keypad code. These instructions were difficult to come by. This video had all the information I need down to the opener ID which I can clearly see options 1-9 by pausing the video. Thank you so much!
thank you - second time I had to borrow your wisdom. All the best!
Thank you! I've looked at other vids, and none gave me the correct steps except yours!! 😊
Great video! Helped my mom and I out so fast
After trying a dozen times to program this keypad, I figured it was broke and should return. But before I did I decided to remove the battery for a few seconds, replace it and try programming it again. It worked that time.
I know I'm years late but thank you brother I have an over head door opener and I've been trying for over a week with no luck. My instructions didn't say anything about holding *# at the same time. It worked perfectly after this video
Thank you so much for adding the link to the remote finally reprogrammed my garage opener
Thanks to this video, I didnt have to go buy another keypad opener...instructions were spot on...thank you for also showing the opener code page.
Out of 20 videos this guy was the best one and it actually worked for me
Man, the 24 people who gave this video a thumbs down must not be too bright. This is a very good video.
U wot m8
Jeff Brown very good the only problem for me was the mounting I put it in upside down and the pad didn't work so now I ave to rekey it
This was by far the most straightforward
set of instructions I have ever followed! Thanks, reprogrammed on the 1st try.
The instructions I downloaded said that Sears Craftsman with a red/orange button was a type 4. Glad I watched your video and saw it was actually type 2…
Also no mention in my instructions of hitting the last button twice during the test…🙄
Thank you so much for this video! Especially showing the owners manual with the different numbers for garage door openers.
Thank you 👏🏽 others did not mention pushing "0" button "twice"!
I appreciate you guys making this video. Helped me get my keypad programmed again after I accidentally changed the PIN a week ago. This saved me alot of future frustration. Keep up the good work!
Best video I have every seen to reset your keypad garage door. Very clear! Awesome video. Thank you!!!!
This video has helped me several times over the years! Thank you!!
Omg thank you so much !! I was going crazy because I don’t have enter button on my keypad . All good now yay !!
Thank you! This video made the reprogramming easy and I had the keypad working in less than 30 seconds
Thank you brother..my mother lost her booklet and I didn't have the code. You showed the codes and I was able to pause it and reprogram her pad...many blessings brother thanks again
After viewing many other videos , trying those others out with no success - this was the only video that worked within one minute!! Thank you so much! You explained it very clearly
Worked so easily! Even got lucky enough to have my opener on your instruction sheet. Great video. Thank you
Thanks works perfectly. The 120+ thumbs downs must not know how to follow directions.
It's been said many times already, but THANK YOU for making this video!! I watched SO many other tutorials that just didn't work, and your video worked like a charm. Yours was short, cogent, and hey, it actually worked. Thanks again!!
Thank you Sir!!!
This was fantastic to actually see it with you presenting the programming. I’m sure many people may think it’s very easy, but I did this four times without any luck. I’ve done others before many years ago.
However, watching you do it made my night not so long....
Thank you!!!!
This is an absolutely perfect video on how to perform this procedure.
I love YT how to videos, like this one. I can't remember the last time I read the directions to do anything. It's all on You Tube! :)
Finally! Someone that knows what they're doing! Thank you!
WOrked perfect, thanks!!!! been tring for months with other videos.
Tried a dozen times to get this thing programmed. Finally looked for a RUclips and had it done in five minutes. THANKS FOR THE GREAT SIMPLE INSTRUCTS!
Thank you for making this video very easy to understand I was able to reprogram my key pad in less then one minute. Awesome job!
You are awesome!! Really appreciate it. Bought a new house and followed your steps. Best how to video ever :)
This worked perfectly for me. Best instructions out there. THANK YOU!
Excellent level of detail but short and sweet. Thanks!
I follow the instructions And I just don’t understand why it won’t work and try four times and I told myself I give up ,so told myself let me check you tube and I found you ,Thank you so much for your simple video and my problem is solve it only take me five minutes I see what I am doing wrong . Thank you again
Your instructions are right on point, Great video!
Very helpful. I was inputting the code# and then waiting for the light to go out. Then inputting the garage opener code#. Once I watched this I realized I needed to enter the passcode#garage door code# all at once. Thanks so much.
Great video! Saved us a replacement trip to the hardware store. Good call holding the company codes up to the camera as well!
I've watched multiple videos and this one helped me with my solution. Thank you for providing all the extra information you are the man!!!
Accurate information, audible sound, and the instructions worked for the green button Sears Craftsman also.
Thank you so much. Your video solved my problem. Direct to the point. Great. 1. Hold #* together until light stops blinking. 2. Enter four digit code of your own creation for example 1234. 3. Then enter garage machine code (year manufactured dependent) for example 3 follow by #. 4. Next climb ladder and press learn button once and light comes on. 5. Then enter your self created four digit 1234 plus 0 and light blinks or you hear two clicks indication of acceptance of your self created code. Henceforth, press 0 to control movement up and down. All said and done, in future when you come home, just type on your keypad 1234 and 0, bingo, it opens and when existing home through the garage input 1234 and 0 to say bye bye home.
The best video man on how to program key pad.
Thanks for the detailed instructions. Exactly what I needed.
Worked like a charm…thanks!!
I moved into this condo and never knew I had one. After 5 years and finding this wonderful walkthrough, I finally can use it.
No more looking for a lost remote for hours. Thank you sir for the video!
Well now you do!
Thanks for your help today
Did not understand that you program the remote first
2nd the garage motto
Very well done for this old guy
Saved me a divorce 😍
I have the new LiftMaster (2011-present) and this was just what I needed. Awesome video!
This is the third time listening to this ,,my father always messes the code up and I have to fix it ,,,strait forward instructions, works 1st time every time
Worked perfect. Even obtained my opener ID from sheet shown in demo. Thanks!
Thank you for the video. I followed it to reset my keypad and it was "spot-on"!
Thank you thank you thank you. This was great! I was able to reprogram my Clicker keypad using your very clear instructions here. Thanks again.
THANK YOU!!!!! My son messed up our code and i could NOT figured out how to fix it. This worked great!
Thank you so much! Saved me so much time!
Concise and simple. Perfect! Thanks!
Awesome!! Thank you so much for posting 👍🏻
Best video, about objective and it helped me a lot. Thanks.
Perfect! Thanks a million! Worked EXACTLY as you described!
I was freaked out at first that any key was opening and closing the door, and then I realized you have to wait 15 minutes for that functionality to stop. Thank you for the video.
Darryl Allen Thanks for that info. He didn’t mention that. Was wondering the same thing.
I tried this a few times with no luck until I tried pressing * before the ID number (*3 on mine). The instructions shown show a * before the numbers so I wonder why it wasn't needed in the demonstration.
Thanks worked the first time I reprogrammed my opener!
This video helped me reprogram my wireless keypad that needed to be reformatted. Thank you so much!
Excellent! So quick and easy!
Thanks mate!
Thanks for the video it was a great help took less then a minute!
Worked great! Thanks guys!
Great and very handy video. Thank you! I've used this several times. Super helpful!!
Thank You! Very Helpful. I was also able to read your Sheet to find my opener code. Good stuff
Excellent demo and it worked straight away. Thank you.
Thanks a ton I programmed it while your video was running👍🏼
The code on the instructions was wrong for my type of garage opener. I just tried them all until I found one that worked. Thanks for the video.
thank you very much . this video should be posted on the company's official website .
Thank you so much!!!! Great instructions and it really worked!!!
Thank you! You are very helpful!!!
You are the greatest!!!!! Many Thanks!!!!!
Worked exactly as you showed! Thank you sir!
This procedure worked perfectly. Thank you!
THX!!!! This was well explained, and it worked for me. Keep it up. :D
Great job/video done in five minutes, thank you!
Thank you I have use this numerous times I’ve never commented and what I do is Win you show the cheat sheet with all the codes I just take a screenshot and then I can zoom in and see how that way you don’t even have to go to the website thank you
Thanks man! Helped alot the reset our code
Thank you…remote now works! Very good tutorial too!
Perfect thank you. Very easy to follow and worked the first time.
Thanks, now we'll finally use this thing that we bought about 1/2 dozen years ago. The mystery is solved, thanks you Columbo… :-)
Worked Perfectly... Thanks for publishing this video...
Follow this exactly. It works!!! Thank you so much!
Great video thanks for posting it. You just made my day.
Thanks GS overhead...perfect video and can even find door opener type in their website
Worked well thak you!
This video helped me out big time tonight. Thank you so much!
Thank you for posting this was very helpful.
Worked as advertised thank you so very much for posting.