I spent a minute and a half reprogramming, (most of it climbing a 15 ft ladder),but probably 20 minutes looking for a simple, quick, to the point video like this one. I don’t know why there are so many long winded videos for something so simple.. Thanks
Boy! The instructions on the key pad were driving me nuts! Then I found this video. So simple n to the point! Wonder why the manufacturer makes so difficult 🤔 n it doesn't work anyway! Thank you sir! Keep up the good work!
Program the key pad: 1.Hit the purple button 2.enter 1234 (if not been programed before) 3.light on opener flashes 4. Repeat steps1-3 to program you own code replace 1234 with your own.
I think there is something inside the motor keeping it from receiving the code the light will not flash on the motor after entering the code but the remotes work great and the sensors are lined up! what can I look for inside the motor to make it accept the key code? THanks
Thank you! My programming stop working after 18 years! I added MYQ and the keypad stopped working. And MyQ works great, except for when I leave at 4:30am in the morning! So to fix this fast was nice. Much Appreciated!
We bought a camera system from a local store back in 1998. It put a stop to most of the deviant behavior from the neighbor's that cant keep their hands off of someone else's stuff. We discovered that we were being watched, our going to and from work ect.
Hey everyone im to angry to read all the comments, but on some Garage Motors(it tells you on the lid), you have to do option B. That will depend on the color of the wire hanging out of the Motor, just try pressing the Enter button once, or twice, or three times. Remember breath and stay calm 😎
So the one my grandparents have, the sprocket on the stop snapped off. I would do a check on that every couple of months. This is a 1999 model, not surprised.
You forgot to mention the troubleshooting where your press each number to see if the light turns on. As I did, I realize the number 5 did not light up so instead buying one at Amazon like you suggested. I changed the code and replaced the 5 with another number. Add it your videos.
Thanks for this. Il have to try this with mine. It wasnt stolen or anything but it definitely has forgotten my code. Made me question my sanity the last time i tried 2 million times the same code that worked up until 2 days ago.
Hi there. I just change the code as you said step by step but now after 10 minutes the new and old code is not working sound it has been not save can you tell the reason why or am I missing any steps? Please advise
Great video and I got mine to work but NOW the garage door opener button in my Grand Cherokee no longer opens my garage door. Any idea on how to have them both work with the same door opener?? :)
There is an inside button on the door to the kitchen. Once setting up the outside keypad, what about the inside button. Can I do that separately next or does it need to be done?
The simplest way to reprogram your key pad I’ve seen. Worked and I’m ecstatic
I spent a minute and a half reprogramming, (most of it climbing a 15 ft ladder),but probably 20 minutes looking for a simple, quick, to the point video like this one. I don’t know why there are so many long winded videos for something so simple.. Thanks
You must have a really tall garage.
Thank you! My wife spent 2 hours on this and I fixed it in 5 minutes. I was a hero for a few milliseconds ;)
Works like a charm. Keep in mind that you must firmly and slowly press the numerical buttons one at a time (on my model at least).
😊
It took me longer to get the ladder out than it did to fix my opener.
Thank you for this video!
Boy! The instructions on the key pad were driving me nuts! Then I found this video. So simple n to the point!
Wonder why the manufacturer makes so difficult 🤔 n it doesn't work anyway!
Thank you sir! Keep up the good work!
2024 …..Why couldn’t the written instructions be so simple!!!
Thank you!
Program the key pad:
1.Hit the purple button
2.enter 1234 (if not been programed before)
3.light on opener flashes
4. Repeat steps1-3 to program you own code replace 1234 with your own.
After setting your own pin, will the garage door opener has learned a new pin is in place ? Please advise. Thanks
Thanks for the video. Bought a house where the previous owner did not know the code. Better then buying a new one!
Thank you so much for this video. We accidently cleared the code and I wasn't sure how to fix is. God Blesd!
Thank you! Your instructions worked on the first try! And I have a Liftmaster, not Craftsman. So easy to reprogram the keypad and remote.
Hope all is well for you and your loved ones, I am very grateful for this tutorial , it is very simple and helpful ! Jesus Loves You!!
This guy is the goat
10th, woo hoo! The ones integrated into the cars are a real pain, especially the Ford system.
I think there is something inside the motor keeping it from receiving the code the light will not flash on the motor after entering the code but the remotes work great and the sensors are lined up! what can I look for inside the motor to make it accept the key code? THanks
Thank you for your clear, concise explanation. Worked perfectly.
Thank you! My programming stop working after 18 years! I added MYQ and the keypad stopped working. And MyQ works great, except for when I leave at 4:30am in the morning! So to fix this fast was nice. Much Appreciated!
Evening do you know if I program my keypad on my garage door would it interfere with my MyQ that I have now
Thanks. Worked like a charm on my chamberlain
LOL!! "For anybody who is a thief, I am going to change that code." Love it!!
Short sweet and down to the point. Your technique worked for me ready to go thanks a lot
Thanks! It literally took me less than 30 seconds to reprogram my remote.
1:18 Plot twist, while you're pressing the remote and learn button in the garage, the toaster and microwave begin planning the next break in....
Thank you! Simple and straight to the point!
Totally worked for adding my garage door opener and changing the outside code. Thanks for the tips!
We bought a camera system from a local store back in 1998. It put a stop to most of the deviant behavior from the neighbor's that cant keep their hands off of someone else's stuff. We discovered that we were being watched, our going to and from work ect.
Hey everyone im to angry to read all the comments, but on some Garage Motors(it tells you on the lid), you have to do option B. That will depend on the color of the wire hanging out of the Motor, just try pressing the Enter button once, or twice, or three times. Remember breath and stay calm 😎
Awsome vid thanks so much just fixed mine. Stay healthy and safe.
Took me less than 5 mins, thanks to you ❤️❤️
This guy is awesome! Everything he said is complete success!
Thanks buddy, by your video i was able to set up garage code today.
Thanks for being quick
Simple but informative thanks 👍
Glad it was helpful!
Thank You , Keep Up the Good Works
Thx 🙏 this was easy and worked. How do I program the garage for a loaner car?
So the one my grandparents have, the sprocket on the stop snapped off. I would do a check on that every couple of months. This is a 1999 model, not surprised.
Thanks. Your video helped me fix the problem
Thanks your video. Simple to the point and it worked.
You might want to add to add a keyless entry to program w the over head door closed on some garage doors
Thank you. I didn't expect it to be that easy. I popped a fuse and had to reprogram all of them.
Great video worked the first time I tried
You forgot to mention the troubleshooting where your press each number to see if the light turns on. As I did, I realize the number 5 did not light up so instead buying one at Amazon like you suggested. I changed the code and replaced the 5 with another number. Add it your videos.
Worked liked a charm!! Tjx you
Great help - thanks man!! 😊
Works perfectly for me, thanks
Hey man, what camera are you using? It is incredible clear!
Just what i was looking for
Great help! Worked immediately. Thank you!!
Thank you! I had to hold the enter button longer than I thought, but once I did, it worked!
Thank you!! Worked like a charm
Thanks for this. Il have to try this with mine. It wasnt stolen or anything but it definitely has forgotten my code. Made me question my sanity the last time i tried 2 million times the same code that worked up until 2 days ago.
What a life saver. Thank you so much!
HouseImprovements - Dude, immensely helpful and money-saving.
Immense thanks!
Thank you! Thank you! So easy 😊
this guy is good
You are the man !
What if key pad doesn't have a button that says enter ?
Hi there. I just change the code as you said step by step but now after 10 minutes the new and old code is not working sound it has been not save can you tell the reason why or am I missing any steps? Please advise
Works and looks great doing it
Thank you for cutting through all the other BS. Worked great
Great video and I got mine to work but NOW the garage door opener button in my Grand Cherokee no longer opens my garage door. Any idea on how to have them both work with the same door opener?? :)
You will have to look in your user jeep manual on how to program the vehicle buttonbut it will be similar steps to this.
Worked. Thanks
What if you don’t have an enter button?
Thanks man good tips
Question - if you change the battery in the keypad, do you have to re-program the keypad?
no not usually
Thank you Sr very appreciate it 👍👍
wow, I will try it. I need a key pad for my garage door
Need to reprogram pad. If I reset, will it affect the car openers?
It did mine. Trying to figure out how to get them to work without interrupting the keypad. Ugh!
Good so good thank you so 🎉much
Thank you sir
Excellent
Thank you for your video it worked perfect! Where would I be able to get a cover for my outside code box.
No idea
Home Depot or Lowe's sell the remotes and outside code with cover assembly.
Fast and easy. good video.
Thanks 👍
Thanks Man!!
Glad to help!
Thank you very much 🙏 great video!!
Thanks; fingers crossed that this works for me. Going to give it a go this afternoon.
Worked perfectly
After setting a new pin, will the garage door opener works on the new pin too ? Please advise. Thanks
In this video I am showing you how to make the opener recognize the new pin.
I have the same keypad and garage door opener! Thanks
Great video, short and sweet. It worked for me, thank you!
Hey I changed the code on my door and both the old code and the new code work, how do I get rid of the old code? Thank you
ruclips.net/video/qEQcw7hY2DA/видео.html
Easy peasy! Thanks
You ate all the fricking chips Kip! …Gawd!
Can you pleasse tell what is the opener Id# for a legacy overhead garage door. I am having a difficult time trying to program my keypad to legacy door
sorry, I do not know.
Thanks for posting. It worked for me.
Helpful video - thank you!
You're welcome!
How do you set the one button close feature on liftmaster
God Bless You!!!!
can you do a video on leveling uneven floors
Thanks for sharing❤️
Will this resets all my other stuff that is already programmed?
it should not
it should not
There is an inside button on the door to the kitchen. Once setting up the outside keypad, what about the inside button. Can I do that separately next or does it need to be done?
Cool man thanks
Can u have both the box and the key fob set at the same time and if so how is that done? Do u just have to do then at the same time?
One at a time
Thank you your video was helpfull
Thanks so much! It was easy!
Can we put a led bulb instead regular bulb in the craftsman
Confused should I get a wooden garage door or insulated door ?
Thank you
Thank you... Nice and simple
That was easy, thanks man.