Genie Intellicode Wireless Keypad Programming & Installations Instructions
HTML-код
- Опубликовано: 4 июн 2024
- In this video we show you how-to program your Genie Wireless Keypad to Genie Intellicode garage door openers. This model GK-R wireless keypad is compatible with All Genie Intellicode openers manufactured since 1995.
- Хобби
For anyone painfully stuck here, it doesnt mention it in this video or in the manual but you can only take these reset and reprogram steps if the garage door is CLOSED.
It does too
Yes… this is true. Thank you. It was opening on the first number of the PIN until I programmed with door closed. 👍🏼
Thank you so much. After literally hours of trying and frustration all I needed to do was shut the damn door. Thank you.
Thank-you! I couldn't figure why I could not get the codes to work, closed door, worked on the first try.
Lol wow. Thank you for that. I thought I got a bogus unit
Great video! I had ordered both the Genie Wireless Keypad and Genie Wall Console. The wall console directions were pretty straight forward, but the wireless keypad directions were a lot more fuzzy. The video cut through all that fuzziness and just gave the brass tacks and left out all the fluff from the written directions. It also helps watching the video being a visual learner. Thanks for taking the frustration out of it!
Just fixed my garage few hours ago while watching this videos. Worked for me
Thank you! I was so frustrated trying this before watching your video, especially just knowing the garage should be closed before attempting!
I did it while it’s op nd
I missed that part! Thanks for this comment!!!
Thank you so much! This video helped me out after hours of frustration. Three part about factory resetting the device first was what helped me most.
Great video. I had tried before using the written instructions. They were very confusing. Your video made this a ten minute task !
Thank you, this works. Much better than trying to read the manual!
I have been trying to do this for months and it finally worked using your video! Thank you!!!
Thanks for this. Able to program and replace my old keypad on the first try!
Thank you so much. Thought I was going to have to throw mine out because the instructions that came with it were not as helpful as your video. Great video. Saving it for future reference.
The manuals I found online and on Genie's website didn't work. What was a simple task turned into a nightmare. Thankfully I found this video and it was spot on about resetting the factory pin/re-programming!
I hate Genie now. I've had nothing but problems with my remotes and keypad.
Honestly one of the best videos out here on genie door opener’s
Worked like a charm! Video was very informative. Thank you.
Life Saver. Worked flawlessly
Thank you easy video. I have tried so many times to program but this really made it easy.
And for those unclear about this: when you add doors 2 and/or 3, the first door automatically becomes number 1. In that if you have multiple doors, you need to hit your code, the up/down button and then 1, to open or close door number 1.
thx ...that wasn't clear in the video - in fact the guy said to either click number 2 or 3 ...which had me curious about door 1
One step is missing if you have an older opener. The LED needs to be red (shown when you press a button) to work with all openers. To switch from green to red, enter the passcode (default is 3, 5, 7, arrow key). Then hold the PROGRAM button until the LED switches from green to red. Excellent video!
Lifesaver! I almost turfed this thing until I read your comment. LOL red mode, FTW =)
Man I would buy you a beer if I could!
Absolute lifesaver, this video!!🙏🏼🙏🏼
God bless you!!
Great video, informative and easy to follow.
Thank you so much for this video! It was easy to follow and most importantly, IT WORKED!!!!
you're welcome!
Great video 👍 Thanks!
Great video! But I think one small step is assumed. On a new unit you use the factory code and program key to set your new PIN. And that works without using the program button on the main power unit. Addition PIN changes will require that the PROGRAM button on the main power unit be activated before a PIN change.
Can you clarify? I had to factory reset after I changed my wifi provider. My master lift is programmed but I still can’t get the key pad to link up. I followed this video but it still not working, I’m thinking perhaps I’m missing something.
Finally!!! Found a method that works. Thank you!!
Good luck reaching Genie Tech Support by phone. Hold time was two hours. They did offer a call back option which I used. The call came early while I was working outside. Not Genie's fault but nonetheless frustrating. Now, I'll try the video.
Directions worked perfectly.
This video was extremely helpful, thanks
As mentioned, the doors must be closed to program. I also found it helpful to do this in low light conditions, or you won't be able to properly see the keypad. Have a ladder on hand to be able to reach the programming button on the opener.
So you're saying I have to unmount my keypad to reprogram? How silly of Genie.
@@stevenking9357 Thank you so much I did not know that IT HAD TO BE CLOSED! BIG HELP!!!!!
We finally got this thing to operate properly. My wife, who is much smarter than I, got it done.
Works and looks great doing it
Thank you for this video. I keep coming back to it every time
It worked amazing way so much better than having to read those stupid instructions that comes in the box thank you so much
Very helpful and explained well
This worked thank you 🙏
Thank you Sir!!! Perfectly paced video! It took a few resets but it all worked. I liked and subscribed
You're welcome, and thank you!
The manual leaves out so much of this important proprietary information. Thanks for making a video with the actual instructions.
Super helpful. Thank you!
Simple and clear instructions!! Thank you!
You're welcome Jagtar
Thank you. Very helpful.
Great video!!! Detailed and simple. Used this instead of the paper instructions.
This was a very very helpful video. It was spot on! Your video actually saved me and helps me to have my remote pad programmed when I couldn’t use it for over 2 1/2 years. Thank you so much for your detailed video it was a lifesaver!
Good video... much better than manual! If your keypad stopped working (like mine did) and the batteries are OK, try taking it apart and cleaning the keypad and battery contacts. The unit is very well built as remotes go, and the problem is likely to be due to dirt or corrosion.
I recently changed the batteries in my wireless keypad and the keypad will not open or close my garage door
When I first placed new batteries in it when I pressed a button the backlight on the numbers flashed
I gave the batteries a try again earlier before I came to this thread and the backlights lit up solid but I don’t think I was able to get the garage door to run so I didn’t enter my code to try it
Maybe I need to let the batteries “charge” or something
(I DO NOT MEAN ”CHARGE” like you charge your iPhone battery but I mean let the keypad warm up to the motherboard
If that doesn’t work then I’ll check for dirt and corrosion
UPDATE: my keypad STILL DOES NOT WORK
I LITERALLY CHANGED THE 🔋🔋 ALMOST A MONTH AGO
Awesome vid made it easy.
Great video! Covered everything in a short amount of time.
My keypad has worked I want door successfully for the last year. I added a new genie opener to the second door last week. Just follow the steps in this video so that I could use the same keypad to operate both doors. However, when I put in my pin both doors simultaneously go up or down. Is this supposed to happen or is there a way to do just one or the other door
Thank you!!!
If nothing is working for anyone. Make sure your opener is not locked. Took my hours to realize but there was a lock option on the wired opener on my wall and it was set to lock
Success! Now my keypad on my new house that’s been sitting there collecting dust for a year can be of use 🎉🎊
Got it! Make sure your program led has gone to red! If it is still green it won't reprogram!
Really helpful
Thanks for your video. I just bought the same keypad but my old Genie model 12A has a Dip switch, is there any way I can make it work with a key pad? It would be very convenient to have the keypad installed outside.
The intellicode keypad is not compatible with the Genie dipswitch operators. Please reach out to us at 1-800-354-3643 so we can provide you more assistance.
Saved my azz thank you!
thanks this helped!!!
Thank you! So much easier than the manual. Finally got it to change the code
Thank you!
This video is very helpful compared to the manual
Is it possible to disable a genie wireless keypad while still having the car remote operate the door?
Success. Thank you
Thank u, Tom Arnold.
Thanks, this was very informative
Very easy, I wish I would have saw this video before trying it off of the keypad instructions.
Very helpful 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
This apply for old genie openers ?
Will this keypad work with other brand door openers?
Thanks. Very helpful.
Anyone giving a thumbs down can’t follow directions.
Not true.
@@tonybudetti it’s true
Thank you SIR
you are welcome!
I mounted one of these on my metal trim around my door, and it would not work. Found I had to move it off of the metal for it to work.
Does the default code open the garage? If so then mine isn't doing that
Thank you
Does it have to be set up before mounted on the wall outside of the garage? We didn’t set it up before.
It is recommended but not necessary.
do i need to have that specific keypad?
What's the difference between the GK-R and GK-BX models?
What if I want to control two doors and I want to open door number one? You say to hit the pin, up, then 2 or 3. What if it’s the primary door I want to open? Also, you say current pin then say pin when talking about the second door. I thought the second door got a different pin, this screwed me up several times
I followed your steps to set up multiple openers, but every time I type in the pin and which number opener, both doors open at the same time. How is that possible?
I watched all the videos and tried all the tricks and resets. Nothing worked. Finally when I was just going to give up I decided to try once more. I opened the cover, the battery cover popped off, there was a hissing sound, and a tiny blue genie popped out of the remote and flipped me off
😂🤣💀
Well the word Genie does originate from an ancient Arabic Demon called a Jinn or Ginn and it wasn’t something perceived as good until after Aladdin and His wonderful Lamp was written by Hanna Diyab in the eighteenth century
@@MClover420 Without the revisionism of making good evil and evil good, the working material of writers and activist historians would soon be depleted. lol
Any tips on resetting the keypad ? Bought a house and they didn’t leave the code
Everything seems to operate as directed except... when using the keypad or openers, instead of opening or closing my garage door, the motor box just clicks?? The wall mount button opens and closes it without any issues though.
Great video, and I have a question. When entering my PIN, the LED flashes for the first two digits, but not for the remaining. Is this an indication the keypad is broken or letting me know the PIN is not valid I'm hoping to know before attempting to reset the PIN using the learn mode. - Thank you!
Every time you press a button the LED indicator should flash. If it is not flashing could be that the button isn't sensing the press, or possibly you may need a replacement.
I do acknowledge this is a clear & straightforward video. I spent the entire afternoon trying to program the second door. Simply didn’t work 🤷♀️
Thanks
what do you enter if only operating 1 door?
Why have you not addressed burrbro235 question. I have the same issue followed the instructions and in the end my pin opens both doors at the same time
These instructions are great. It worked. The manual is not well written!
Does anyone know how to make the keypad or the remotes close the garage door?
I don't like having to enter in the pin number to close the door. Is there another way? Previously I had a Liftmaster keypad, and to close the door all you had to do was press the enter button. Of course, you had to enter in the pin + enter to open it.
Im looking for the same thing
About the keypad reset procedure. Can someone maliciously do the keypad reset procedure resulting in erased codes and therefore unable to open the garage door(s)?
Can you set two different codes ?
Cause the current pin set is same as house door
Thanks
no you cannot have two PINS, you can reset your PIN or you can use a temporary PIN
It helps
I thought I did something wrong when the door kept operating after I did the factory reset on the code. Turned it it's just that if you hit any key too soon after putting in the code any key will open it. I couldn't program the new code because the door kept opening. I just let it sit a minute then programmed the new code and it worked.
Just bought a new house and going to reset the keyless entry. If I reset the keyless entry does it effect the remote? Would I have to relearn the remote also?
As long as you are not clearing out the receiver memory. So if you have a learn code button, do not hold the learn code button in as that will reset the remote.
Genie Company what is the learn code button ? Pls help!
it’s the button that u can use to program remotes, keypads, etc. it is typically on genies black or a brownish yellow, and is located inside the light covers, on the back of the unit, or on the bottom or front of the unit.
This video helped a lot..thanks Genie
You are welcome
@@GenieCompany need help I hit any button and it goes up and down
@@tonysarmiento4629 the keypad has a "panic" feature built into it, you will (depending on the model) have either 30 seconds or 15 seconds that the lights on the keypad stays on after using. in that time frame any button will activate the door.
@@GenieCompany mine does the same thing and wont take the new code
@@GenieCompany so do you wait out the 15 seconds before programming the new code?
I did everything you explained on your video, the Genie learned the door opener, unfortunately I tried a new number but every number opens and closes the garage door. Even one digit number. So weird.
This is the panic feature of the keypad, as long as the back lights stay on you'll be able to press any button and any key will open the door, this will last from 15-30 seconds. once all lights are off, you can fully reenter the pin
These genie external door openers are terrible! The button response is not good and too spongy, plus my units always lose their programming to the openers and I have to do the steps all over again. Very frustrating.
Hey so when i try to program the key pad, it does a few things that are not working. First hitting the program set button and then the cod and UP/DOWN Arrow keys do nothing. As in the door does not move or even attempt to move. The next is that when the door is closed, i am able to use the wireless garage door opener. I enter the factory set passcode and then the UP/DOWN Arrows and the door opens. However if i wait the required time and do the exact same thing to try and close it, nothing happens. Help please.
Hi Jay - It could be that you have an older version of the keypad, if you are re-programming an existing keypad, you will need to follow the clearing instructions, and then start completely over, please clarify if this keypad is new, and what model number you are programming it to. Thank you!
What if I don't know the factory default code? I need to program a new code without the old code. How?
Keypad would need to be reset, along with reprogramming to the garage door opener motorhead inside the garage, please call us at 1-800-354-3643
How do I program a Genie remote from another remote? Button built into car works but I lost the handheld remote. GBO is on 2nd home several hrs away so I can't access actual opener but need to send a remote to repair person.
Hi Sarah - This isn't possible, the remotes program to the garage door opener motorhead. If there isn't an existing remote, you would need to purchase one and program it to the garage door openers motorhead.
my backlight does not come on for resetting the keypad even after installing new batteries.. I wonder why?
I cant get this to work on my silentmax 1000 series. When i hold the programming button it only light up blue and does not start flashing purple when i release it.
Reach out to us at 1-800-354-3643
No Led light flashing when pressed the learn button what did I do wrong? please respond thank u
If the LED on the garage door opener is not flashing when you press the learn button, you may need a new receiver board. Call us at 1-800-354-3643 for further assistance.
my wireless keypad will open and close the without put a pass code number Yes pass code of 4 number is program what step I miss or or redo the program?
Nothing :) There is a panic feature built in the keypad, designed if you forgot something and need to re-enter the garage quickly. Just wait for the lights behind keys 3,5,8 to go out, and enter the pin (full pin) and you should be good to go!
Have tried repeatedly and can’t get past the 357- up down. (Before attempting setting my own code. ) The keypad just fast flashes every time and door never opens. This is the second time this keypad has stopped working for opening my two garage doors…
I have a Chamberlain gate opener with no learn code, but uses dip switches. I tried the virtual dip switch programming approach, but not successful. Would a 2000 year model be ID# 32 and will this remote work or do I need to different universal remote or one specifically made for Chamberlain gate openers. I had a liner universal remote that worked, but was not waterproof.
This keypad, will only work on Genie garage door openers. Did you purchase the Genie Unviersal Keypad?
question: can I operate two garage doors with two different pins?
No - you will need to use the same PIN and control it with the number the door is. You can add a temporary PIN, but as soon as the primary PIN is used it will be cleared and no longer usable.
I have a genie remote in my car that operates the garage door fine. If I install the wireless keypad outside on wall, will my remote still work in car??