Use the Amazon Affiliate* Links below to buy supplies for your repairs: Chamberlain Liftmaster Remote: amzn.to/3dHHW9m Genie Remote: amzn.to/35f0E4u Garage Door Not Opening or Intermittent Issue - ruclips.net/video/5UYDqS21MU0/видео.html Genie Garage Door Opener Bulb (4 pack) - amzn.to/37lUBxC Genie Garage Door Opener Bulb (single) - amzn.to/2IFTr5E *My description and comments may include referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!
My my garage door opener stopped working. I was prepared to disassemble the unit to repair it, as it turned out the problem was the LED bulb. Changing the bulb save me a lot of work and frustration. Thank you😊
When my garage remote stopped working, I called the company and they wanted to charge me $189.00 to send a technician to bring me a new remote and program it for me. Found your site and this wonderful video. My setup is exactly like yours, so I followed your instructions and voila, it worked perfectly! Thank you so much for posting this to help those who are not the best DIYers around, and saving me all that dough!
Bob Antunes That’s great news, Bob! I’m glad I was able to help save you money. It’s crazy they would charge that much. I think $89 would be much more reasonable. Be sure to subscribe. I do my best to make easy to follow, practical videos.
But Bob, why wouldn’t you just call the ‘guy!’ Just kidding! I had the start capacitor go out on mine and found a replacement for $8 bucks. Relatively easy install, but you do have to discharge the old one before removal. I put the info on Nextdoor and I was berated for doing something so dangerous and I should have just called ‘The Guy.’
Wow I've been sprinting out of my garage for 3 months thinking the remotes were broken....60secs and both remotes are working now. Thanks a bunch for this video!❤❤
Ahhhhh!!! Yes....I had an led bulb in mine. It wouldn't even light up so I just thought something was wrong with the socket or the opener. Later the remotes stopped working. Was about to buy a new opener! Found your video and replaced the led bulb with a standard 60w and WAALAA!! ...the remote works and the bulb works!! Never would have thought! You are my hero! Thank you!!
This video just saved me $300 for a new garage opener. My garage door opener is working but most of the time is having issue. As stated at the end of this video, led bulbs can interfere with the signal. This turned out true. I switch the bulbs and the garage can be open and close every time. Great video!! Thanks!!
Awesome video! Since I met my girl I couldn't figure out why her garage door opener would not work after the button was pushed once. LED bulb was the culprit! Thanks for posting this! Straight to the point. Love it!
Brilliant. The LED Bulb interference comment at the end was the game winner for me. I would have never made that connection and would have been baffled why the door was so intermittently responsive. Big Kudos to you for your very helpful video!!!
No shit, I've been Dickin around for months trying to find out why my doors remote would work then not work. Took the led out and just saved my ass 600 bucks.
My garage door remote had been working intermittently, then stopped altogether today. Came upon this video, then recalled I recently had installed LED bulbs. ?Replaced them with regular bulbs, and remote is working again. Who knew? Not me lol. Thanx for the tip! P.S. -- will like and save this, as your opener and remotes happen to be the same as mine!
I was pulling my hair out trying to figure out why my remotes weren’t working. I was pressing the Learning button constantly but nothing. This video was the first to mention the light bulb. Once I removed the lightbulb in mine, it was able to sync with my remote. Thanks very much!
Finally a video that explains exactly what I was looking for. Took 3 mins 🙏🏾, the garage door company tried to tear my head off with the price. Now I can give them 2 middle fingers till my next garage issue that’s not opener related 😂😂😂😂
Ha-thank you! Plenty easy to program remote, BUT you were the one who solved my mystery. One door worked fine, but I could not get my other door back online even after re-programming two remotes that I've used for years. The culprit was the LED light bulb I put in about a week ago! Took it out and the remote worked fine. Thank you!
Thank you so much! The instructions on the garage door opener are wrong and say to hold both buttons and then release at the same time, which was not working!!! You saved my sanity!! Appreciate it!
Thank you so much for this video. You don’t know how much you have saved my grandma from spending money on a technician to come fix her garage door. Bless your heart.
Thanks so much for this video. What a lifesaver! I replaced the light bulb on my garage door opener and all my remote controls stopped working. I’ve been troubleshooting for days and can’t figure out what the issue was. Had the opener for over 15 years and searched websites and thought the remote control board is old and bad. The last portion of your video remind me that my new light bulb is a LED one. Replaced it with a stander light bulb and Bing, every thing back to normal and working fine now. I’d never ever thought a LED will give me so much trouble. Thanks again
DY100100 I’m glad you found the video because it’s a super frustrating problem. It took me a few weeks to figure out too! Be sure to share the video with your friends!
You are a genius. Thank you so much for this video! We could not understand why all of our garage door openers spontaneously stopped working. One would intermittently work... yep we changed to an LED light. Just purchased the Genie bulb. Thank you so much!
This is a great video, helped fix my garage door closing issue with remote after changing light bulb for the motor. I watched close to a dozen other videos and read blogs to understand what the issue is with garage motor and remote. The issue turns out related to using a LED bulb for motor which conflict with remotes signal, replacing LED with regular bulb resolved the issue. Thanks @TighWadDIY for publishing this awesome video, it saved $ for me to fix the issue.
You solved my problem starting at 2:40 min in the video. Now If you solve the new problem which is my wife telling me "I told you it was the LED bulbs" ! Thank you!
Thanks soooo much !!! My opener was working intermittently with remote. I replaced the led light with incandescent and It works great !!! You saved me a lot of money. Thanks again!!!
Thank you for the video. I never imagined that the LED bulb I put in would affect my garage door opener remote - but it did. You saved me from buying a new remote, thank you again
Yes this video is helpful. I changed my remote batteries 2 times but didn’t work. After watching this video i press that button and reset right away my remote start working. Hurrah thank you a-lot.
I have two garage openers for separate doors same brand. One works with remote,the other don't. The one that don't has led bulbs. I will change out and test. Remotes have new batteries. Both lift by hardwired buttons in garage. Thanks for the tips. Very helpful.
Really appreciate a short and factual video. I’m hoping it’s the lightbulb. I’ll change it and also try the reprogram hack. Fingers crossed it works and it’s not the big tension spring. It’s made it 19 years! This is the first time I’ve had an issue.
Excellent and detailed Info. I think that based on the content of this video archive, I just figured out what was going on with my garage door being unresponsive to my remote. Thanks a lot !
Omg, you saved me!!! I've been trying to get this repaired for weeks. This was definitely my problem. Thank you for sharing this video. You are the BEST!
Me too! I almost closed the video (I knew how to program a remote) but watched to the end due to this comment. I was so close to just buying a new machine...thanks!
@@MichaelRoberts01 It’s a good thing you aren’t a quitter! I do have another whole video talking about this issue so hopefully you would have stumbled onto that one instead! I’m just glad you got it fixed.
This worked perfectly! I really didn’t expect it to work, because it was so easy! But it worked and now my two remotes open and close my garage door! Thank you......
Starting with the door being in the closed position cannot be emphasized enough ...that was what i was doing wrong the whole time and couldn't figure it out until this video. Thanks!
Thanks for the refresher short course on reprogramming your remote control. I replaced my batteries in my remote and the oper would not work. Thanks again 👍
This video is short and to the point, The video speeds up at the right time. The editing is good, (we don't need to see the cover taken off) and there's a lot of information in a short period of time. One of the better videos I've seen. I'll try a regular incandescent bulb. Thank you for posting!
I love u tube because of this kind of video . Thank you Sir . I also found one more trick which is as follows - -Please check door opener button/switch installed on the wall in the mudroom. Locate small button called "Learn" . Use that learn button. - Press one key on garage door remote. Thats it . This might save you ladder climb to garage motor mounted on the ceiling.
So just how important is it to close the garage door first? I tried for hours a month ago to make my HomeLink work in a newly purchased car. Nothing worked. I ended up de-programing the remote transmitter that came with the opener. Now I couldn't use HomeLink OR the remote. I tried again tonight after watching your video (first programing the remote and then following HomeLink instructions to program from the car's button). Both worked on the first try. The only difference is that you are the first to say to close the door first. Thanks. My wife will be especially grateful to not get any more calls 2 minutes before I pull up asking for someone to open my garage door. First World Problem Solved!!
Dude!!! The LED side note you added at end... Bro you solved my issue. I was like why is my opener opening but not closing? Because the new LED light i just replaced is on when I’m trying to close it and emitting interference. Great video, sir!
Great video ! I have a very old opener remote and sometimes I have to wriggle the battery to ensure contact on both ends. Not ideal but this may get you in 👍🏼 good luck
Worked like a charm...thanks a lot for making this video! You saved me a trip to the store and wasting money on a new remote. I thought mine was busted!
Tried buying new remotes, extending antennae, turning off wi fi, and changing light bulbs, no leds, nothing worked to fix remotes not working. Noticed a melt spot on plastic near the light bulb area. Put in very low watt bulb from the fridge and BINGO, now all remotes work like a charm. Hope this helps someone!!😄😅
@@TightWadDIY and Fyi - the led bulb causing the issue was not the bulb in the machine, it was the bulb in the garage which was only a few inches away.
Well. Changes the light bulb. It opens but won’t close nothing wrong with it. Geez. Oh lord. Big Typo!! The issue I had was the sensors were not communicating. The door would come up but not down. Common sense after thinking, and cleaning sensors solved the problem. Thank you!
Great video! Quick and to the point. Only problem I am having is after programming three remotes, they all open the garage but none of them will even attempt to close the garage. Any ideas? Thanks!
Thanks buddy.. the only video that help me with my remotes. The only other thing. To set the second remote. I had to wait till the light went out automatically., than programmed the second remote...
I just can't believe it. My Craftsman garage door remotes and outside key pad started giving me fits 4 days ago, as it would work sometimes, and not work other times. I changed all the batteries and still no success. The same remotes did work on my other garage door on the out garage. Then I watched your video and guess what I did 4 days ago that triggered my problem..., l changed the burned out light bulb on the opener with an LED light bulb. CASE Closed and thank you so much for your tip on LED bulbs interfering with the remote frequency. Really appreciate you help!!!!!!!
@@TightWadDIY Thank you again. When I changed the bulb and started having remote problem, my wife ask me if I hit or touched any of the adjustment knobs and mess something up. I told her I couldn't have touch any because the light is on the front of the unit all by itself. The back of the opener has all the adjustments and I didn't come close to any of them. LOL, Unbelievable!
If you don’t have color purple learn button door opener, different the color a learn button or if you have same the color of a purple learn button a remote by chamberlain or lift master.
Unfortunately no it didn't and I replaced the battery in the clicker first. So I'm assuming it just died so I ordered a replacement. If the new one doesn't pair then I'll be searching for more trouble shooting videos. It just stopped working 🤔
I only had one remote that came with the house. And it just stopped one day. I changed the battery and it still didn't work. The new one should be coming today and I'll see if it can pair.
@@elizabetht1323 I actually recommend clearing all codes when you move into a home just in case the previous owner still has remotes or Homelink devices set up to open the doors. This is typically done by holding the learn button for 10-15 seconds.
Not sure if I’m in the right video. My problem isn’t that there’s no connectivity or program to the remote. The problem with my unit/controls is that the door will close partially, sometimes it just “jumps” a bit, and goes back up. Sometimes it’ll go down a few feet, then stops and goes back up. Sometimes it works fine. Almost like it has a mind of its own. This happens with both remotes, the wall activator, and the pad on the outside. Thoughts ???
Thank you I am following the steps but seems like the learn button is not taking the signal. The learn button light up after I press it but when i try to program the remote opener it does not pick the signal, tried different remote. What would you recommend?
1:41 - I get to this exact step, fresh battery in remote.. and nothing happens. Nothing. No bulb comes on. No click. Nothing. And I have the exact same remote and opener. I'm at a loss.
Hello, thanks for unloading the video. I do have a question regarding built in car remote garage opener. Is this the same procedure to program the factory car remote? Thanks.
You got me thinking about this. I have a few brands of CFLs and LEDs. If I take a portable AM radio next to them, some generate a lot of broadband RF noise and others are very quiet. I believe that the offenders don't have good filtering on their inverters and you can hear the distinctive square waves which generate many odd harmonics. The same problem exists with some solid state fluorescent light ballasts (I have in my garage.) The problem can also occur with some usb power supplies. I have an amplified TV antenna whose power supply blocked out all AM radio reception until I changed the power supply. It's strange that GDOs have their antenna hanging down blocked by a metal garage door which can be a problem from the outside.
Use the Amazon Affiliate* Links below to buy supplies for your repairs:
Chamberlain Liftmaster Remote: amzn.to/3dHHW9m
Genie Remote: amzn.to/35f0E4u
Garage Door Not Opening or Intermittent Issue - ruclips.net/video/5UYDqS21MU0/видео.html
Genie Garage Door Opener Bulb (4 pack) - amzn.to/37lUBxC
Genie Garage Door Opener Bulb (single) - amzn.to/2IFTr5E
*My description and comments may include referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!
P
My my garage door opener stopped working. I was prepared to disassemble the unit to repair it, as it turned out the problem was the LED bulb. Changing the bulb save me a lot of work and frustration. Thank you😊
When my garage remote stopped working, I called the company and they wanted to charge me $189.00 to send a technician to bring me a new remote and program it for me. Found your site and this wonderful video. My setup is exactly like yours, so I followed your instructions and voila, it worked perfectly! Thank you so much for posting this to help those who are not the best DIYers around, and saving me all that dough!
Bob Antunes That’s great news, Bob! I’m glad I was able to help save you money. It’s crazy they would charge that much. I think $89 would be much more reasonable. Be sure to subscribe. I do my best to make easy to follow, practical videos.
But Bob, why wouldn’t you just call the ‘guy!’
Just kidding! I had the start capacitor go out on mine and found a replacement for $8 bucks. Relatively easy install, but you do have to discharge the old one before removal. I put the info on Nextdoor and I was berated for doing something so dangerous and I should have just called ‘The Guy.’
videos like this make RUclips great. Allowing people to learn to do things on their own. Thank you very much.
You are very welcomed my little k i n o j i
Wow I've been sprinting out of my garage for 3 months thinking the remotes were broken....60secs and both remotes are working now. Thanks a bunch for this video!❤❤
Yay! I’m glad it worked for you!
Ahhhhh!!! Yes....I had an led bulb in mine. It wouldn't even light up so I just thought something was wrong with the socket or the opener.
Later the remotes stopped working. Was about to buy a new opener!
Found your video and replaced the led bulb with a standard 60w and WAALAA!! ...the remote works and the bulb works!!
Never would have thought!
You are my hero! Thank you!!
Yes! I’m glad you found the video. Now be sure to subscribe and share this video with your friends so they don’t have the same issue.
This video just saved me $300 for a new garage opener. My garage door opener is working but most of the time is having issue. As stated at the end of this video, led bulbs can interfere with the signal. This turned out true. I switch the bulbs and the garage can be open and close every time. Great video!! Thanks!!
Finally, someone who qas very detailed and easy to understand. About door close, transmitter fixed frequency, and even les frequency. You are awesome.
I’m glad you found it helpful. I’m a school teacher so I’m used to providing clear instructions!
After wasting 3-4 hours when I was about to call servicing, this video came as the lifesaver! Thank you!!
That’s great to hear! I’m glad you found the video. It took me several weeks to finally figure out what the issue was.
Awesome video! Since I met my girl I couldn't figure out why her garage door opener would not work after the button was pushed once. LED bulb was the culprit! Thanks for posting this! Straight to the point. Love it!
I’m glad you found the issue!
@TightWadDIY not only do I appreciate the video but I appreciate your not making a 5-minute video out of a 30-second issue. Great video!
@@hemispheresamusements7484 I do my best to stick to the point.
Brilliant. The LED Bulb interference comment at the end was the game winner for me. I would have never made that connection and would have been baffled why the door was so intermittently responsive. Big Kudos to you for your very helpful video!!!
Great! I’m glad you figured it out!
No shit, I've been Dickin around for months trying to find out why my doors remote would work then not work. Took the led out and just saved my ass 600 bucks.
My garage door remote had been working intermittently, then stopped altogether today. Came upon this video, then recalled I recently had installed LED bulbs. ?Replaced them with regular bulbs, and remote is working again. Who knew? Not me lol. Thanx for the tip!
P.S. -- will like and save this, as your opener and remotes happen to be the same as mine!
That’s great! I’m glad it help you solve your issue!
I was pulling my hair out trying to figure out why my remotes weren’t working. I was pressing the Learning button constantly but nothing. This video was the first to mention the light bulb. Once I removed the lightbulb in mine, it was able to sync with my remote. Thanks very much!
I’m glad you found the video! You can get a Genie brand LED that won’t interfere.
@@TightWadDIY thanks again!
I was following the instructions that was on the motor and it wasn't syncing, this video save me.
Great! Im glad it worked for you too!
Finally a video that explains exactly what I was looking for. Took 3 mins 🙏🏾, the garage door company tried to tear my head off with the price. Now I can give them 2 middle fingers till my next garage issue that’s not opener related 😂😂😂😂
Ha-thank you! Plenty easy to program remote, BUT you were the one who solved my mystery. One door worked fine, but I could not get my other door back online even after re-programming two remotes that I've used for years. The culprit was the LED light bulb I put in about a week ago! Took it out and the remote worked fine. Thank you!
Yes! That issue plagued me for a several weeks before I figured it out!
Thank you so much! The instructions on the garage door opener are wrong and say to hold both buttons and then release at the same time, which was not working!!! You saved my sanity!! Appreciate it!
That’s odd that their instructions were wrong. I’m glad you found the video!
Thank you so much for this video. You don’t know how much you have saved my grandma from spending money on a technician to come fix her garage door. Bless your heart.
Awwww. I’m glad you were able to get it working for her again.
Thanks so much for this video. What a lifesaver! I replaced the light bulb on my garage door opener and all my remote controls stopped working. I’ve been troubleshooting for days and can’t figure out what the issue was. Had the opener for over 15 years and searched websites and thought the remote control board is old and bad. The last portion of your video remind me that my new light bulb is a LED one. Replaced it with a stander light bulb and Bing, every thing back to normal and working fine now. I’d never ever thought a LED will give me so much trouble. Thanks again
DY100100 I’m glad you found the video because it’s a super frustrating problem. It took me a few weeks to figure out too! Be sure to share the video with your friends!
You are a genius. Thank you so much for this video! We could not understand why all of our garage door openers spontaneously stopped working. One would intermittently work... yep we changed to an LED light. Just purchased the Genie bulb. Thank you so much!
It was such a frustrating problem! Hopefully the Genie bulb does the trick!
I want to thank you so much. I followed your steps and was able to fix the problem with my garage door opener.
Glad it helped. Be sure to subscribe so I can help you fix things in the future.
This is a great video, helped fix my garage door closing issue with remote after changing light bulb for the motor. I watched close to a dozen other videos and read blogs to understand what the issue is with garage motor and remote. The issue turns out related to using a LED bulb for motor which conflict with remotes signal, replacing LED with regular bulb resolved the issue. Thanks @TighWadDIY for publishing this awesome video, it saved $ for me to fix the issue.
That is correct. The LED bulbs are the culprit. Took me a while to figure it out too.
You solved my problem starting at 2:40 min in the video. Now If you solve the new problem which is my wife telling me "I told you it was the LED bulbs" ! Thank you!
typhoon1j Haha. We’ve all been there!
Thanks soooo much !!!
My opener was working intermittently with remote. I replaced the led light with incandescent and
It works great !!! You saved me a lot of money. Thanks again!!!
That’s great! I’m glad you found the video!
Thank you for the video. I never imagined that the LED bulb I put in would affect my garage door opener remote - but it did. You saved me from buying a new remote, thank you again
It’s crazy isn’t it? I’m glad you found the video.
Yes this video is helpful. I changed my remote batteries 2 times but didn’t work. After watching this video i press that button and reset right away my remote start working. Hurrah thank you a-lot.
That’s great! I’m glad you were able to get it working!
THANK YOU.. LED bulb was indeed the culprit. Had tried everything. Replaced with a standard bulb and now working like a charm :) !!
Great! I’m glad you found the video. It was such a frustrating problem!
OMG! I’m glad I watched all the way to the end. It was the darn LED lightbulb that was interfering with the programming. Thank you very much!!!
I’m glad you found the issue!
The light bulb tip at the end of the video fixed our issue! Thanks!
That’s great! I’m glad it got you fixed up!
I have two garage openers for separate doors same brand. One works with remote,the other don't. The one that don't has led bulbs. I will change out and test. Remotes have new batteries. Both lift by hardwired buttons in garage. Thanks for the tips. Very helpful.
Definitely try removing the bulbs and see if it still happens.
Really appreciate a short and factual video. I’m hoping it’s the lightbulb. I’ll change it and also try the reprogram hack. Fingers crossed it works and it’s not the big tension spring. It’s made it 19 years! This is the first time I’ve had an issue.
Excellent and detailed Info. I think that based on the content of this video archive, I just figured out what was going on with my garage door being unresponsive to my remote. Thanks a lot !
That’s great! I’m glad you figured it out!
Omg, you saved me!!! I've been trying to get this repaired for weeks. This was definitely my problem. Thank you for sharing this video. You are the BEST!
Thata great! I’m glad you found the video and got it all worked out.
Fantastic! Your brief comment about LED interference just solved my problem. Thanks!
That’s great! I’m glad it helped you out.
Me too! I almost closed the video (I knew how to program a remote) but watched to the end due to this comment. I was so close to just buying a new machine...thanks!
@@MichaelRoberts01 It’s a good thing you aren’t a quitter! I do have another whole video talking about this issue so hopefully you would have stumbled onto that one instead! I’m just glad you got it fixed.
So, the directions and instructions the manufacturer sent. Didn't work at all.
Tried this. First try it worked.
Good job my man and thank you!
Dan That’s great! I’m glad it worked out for you.
Ahh THANK YOU! Changing out the LED bulb was the trick!
Great! I’m glad you found the video!
This worked perfectly! I really didn’t expect it to work, because it was so easy! But it worked and now my two remotes open and close my garage door! Thank you......
It’s super easy once you know the process! I’m glad it worked for you.
Starting with the door being in the closed position cannot be emphasized enough ...that was what i was doing wrong the whole time and couldn't figure it out until this video. Thanks!
Thanks for the refresher short course on reprogramming your remote control. I replaced my batteries in my remote and the oper would not work. Thanks again 👍
My pleasure.
This video is short and to the point, The video speeds up at the right time. The editing is good, (we don't need to see the cover taken off) and there's a lot of information in a short period of time. One of the better videos I've seen. I'll try a regular incandescent bulb. Thank you for posting!
I love u tube because of this kind of video . Thank you Sir . I also found one more trick which is as follows -
-Please check door opener button/switch installed on the wall in the mudroom. Locate small button called "Learn" . Use that learn button.
- Press one key on garage door remote.
Thats it .
This might save you ladder climb to garage motor mounted on the ceiling.
Good to know. My system doesn’t have that option.
I live in Dubai ....and instruction described in the video did it for me ....Thanks
That’s great! I’m glad it worked for you too!
LED lightbulb was the problem on my craftsman gdo! Never heard of that until running across your video! Thanks for the clue!
I’m glad you found the video!
Thank you so much. Got it done in 3 minutes. Hardest part was not falling off ladder lol.
Yes! I’m glad it worked!
Worked like a charm. Thank you!! Simple, easy instructions for this Daddy’s girl
That’s great! I’m glad it worked for you too!
So just how important is it to close the garage door first? I tried for hours a month ago to make my HomeLink work in a newly purchased car. Nothing worked. I ended up de-programing the remote transmitter that came with the opener. Now I couldn't use HomeLink OR the remote. I tried again tonight after watching your video (first programing the remote and then following HomeLink instructions to program from the car's button). Both worked on the first try. The only difference is that you are the first to say to close the door first. Thanks. My wife will be especially grateful to not get any more calls 2 minutes before I pull up asking for someone to open my garage door. First World Problem Solved!!
I’m not sure how important it is but that’s what the instructions say to do! I’m glad yours is working now!
Dang. I need a garage door opener like that. That thing not only opens super fast but makes an awesome sound too 🤣
Haha! It’s an upgrade!
@@TightWadDIY🤣🤣 seriously I just followed the program learn procedure and fixed my problem. Subscriber now.
@@Bptrsn1 That’s great! Thank you!
Thanks, that did the trick. I had tested the power-outage key the day before, and I think that's what made me have to do it.
I’m glad it worked for you!
Thank you! You just saved me $200, which is what the company i called was going to charge me to send a technician out.
An honest company would tell you to do these things before coming out.
Omg Thank you! The instructions they gave me didn’t work. But your video saved me!!! Thank you!!!
That’s great! I’m glad you got it working again!
Dude!!! The LED side note you added at end... Bro you solved my issue.
I was like why is my opener opening but not closing? Because the new LED light i just replaced is on when I’m trying to close it and emitting interference.
Great video, sir!
The LED issue had me stumped for a few weeks! I was so excited when I finally figured it out. I’m glad it helped you too!
Thank you. Worked exactly as described and took less than one minute.
That’s great! I’m glad it worked for you too!
wow that was so easy, thank you for the knowledge! I thought I was gunna have to pay some to come out and look at our garage
That’s great! I’m glad you found the video and saved some money!
Great video !
I have a very old opener remote and sometimes I have to wriggle the battery to ensure contact on both ends. Not ideal but this may get you in 👍🏼 good luck
You can get a new one for cheap!
Worked like a charm...thanks a lot for making this video! You saved me a trip to the store and wasting money on a new remote. I thought mine was busted!
Reza Ghavami That’s great news! I’m glad it worked for you. Be sure to subscribe so I can help save you a lot more money!
OMYLORD! Thank you ! Thank you! Outstanding, Short , Clear, To the point! Very grateful!
I can appreciate the production value on your vid. Many others just drone on and on and I have to scrub to find what I need. Thx!
skeet0rz Thank you for taking the time to comment. I try to be informative but to the point.
OMG! THANK YOU! Straight to the point and very helpful!
You’re welcome.
Thanks! I fixed my garage door opener in 10 seconds flat! 🙏🏾
That’s great!
Thank you so much! A quick and easy fix that worked perfect!!!
Glad it helped!
perfect short , clear and to the point!
Thanks!
This saved my sanity!! THANK YOU SO MUCH!
I’m glad you found the video!
Tried buying new remotes, extending antennae, turning off wi fi, and changing light bulbs, no leds, nothing worked to fix remotes not working. Noticed a melt spot on plastic near the light bulb area. Put in very low watt bulb from the fridge and BINGO, now all remotes work like a charm. Hope this helps someone!!😄😅
Wow! That’s crazy! I’m glad you figured it out!
@@TightWadDIY thanks. I was ready to buy a whole new system. So frustrating.
Your video saved me $50.00. Thank you
Great! I’m glad it worked for you too!
Saved me $$$ in less then 1 minute .Thanks 🙏🏼
That’s great! I’m glad it worked for you too!
Yep, LED bulbs were my problem. Brilliant!
Great! I’m glad you figured it out!
Thanks a lot , that was very helpful. Programed in 5 seconds. Thanks again.
That’s great! I’m glad it’s working for you!
Thank you for mentioning LED bulbs!
You’re welcome!
Thanks !!! Did not know about the LED bulb factor.
Yes it’s so odd but definitely causes issues.
@@TightWadDIY and Fyi - the led bulb causing the issue was not the bulb in the machine, it was the bulb in the garage which was only a few inches away.
Great tip about an LED bulb disabling the wireless remote!
That issue caused me headaches for a month before I figured it out.
Well. Changes the light bulb. It opens but won’t close nothing wrong with it. Geez. Oh lord. Big Typo!! The issue I had was the sensors were not communicating. The door would come up but not down. Common sense after thinking, and cleaning sensors solved the problem. Thank you!
I’m not sure what your comment means. Is there a typo?
thank you so much! this was so easy to follow
My pleasure!
Great video and I reprogrammed two remotes for my house.
That’s great! I’m glad they are working well for you!
Great video! Quick and to the point. Only problem I am having is after programming three remotes, they all open the garage but none of them will even attempt to close the garage. Any ideas?
Thanks!
keep up the great work, simple and easy to do kudos!!!
Thanks buddy.. the only video that help me with my remotes. The only other thing. To set the second remote. I had to wait till the light went out automatically., than programmed the second remote...
Quick and painless! Easy fix. Thank you.
Great! I’m glad you got yours working again!
I just can't believe it. My Craftsman garage door remotes and outside key pad started giving me fits 4 days ago, as it would work sometimes, and not work other times. I changed all the batteries and still no success. The same remotes did work on my other garage door on the out garage. Then I watched your video and guess what I did 4 days ago that triggered my problem..., l changed the burned out light bulb on the opener with an LED light bulb. CASE Closed and thank you so much for your tip on LED bulbs interfering with the remote frequency. Really appreciate you help!!!!!!!
I’m glad you found the video! It’s a really odd issue that takes a while to figure out. Genie does make a LED bulb that doesn’t interfere.
@@TightWadDIY Thank you again. When I changed the bulb and started having remote problem, my wife ask me if I hit or touched any of the adjustment knobs and mess something up. I told her I couldn't have touch any because the light is on the front of the unit all by itself. The back of the opener has all the adjustments and I didn't come close to any of them. LOL, Unbelievable!
@@hankgavarkavich1599 I’m sure she wasn’t happy with you for “breaking it”! All is well and now you can be the hero!
Great tutorial. Thanks!!
Glad it was helpful!
This was a big help! Thanks!
Great! I’m glad you found it helpful!
To the POINT and Very helpful info! Thank you!
Glad it was helpful!
Thank you! This helped me and my family. 🙂
My pleasure! I’m glad it helped you out.
nice tip about interference! Solved my problem
Great! I’m glad that got you fixed up!
If you don’t have color purple learn button door opener, different the color a learn button or if you have same the color of a purple learn button a remote by chamberlain or lift master.
That was easy programming that remote, so yeah and nice your video. 👍👍
Great! I’m glad it worked!
Your the only one who said the door has to be closed. Now I'll try this again.. lol.. hopefully that was my issue
Hopefully this gets your fixed up! Let me know if it doesn’t work!
Unfortunately no it didn't and I replaced the battery in the clicker first. So I'm assuming it just died so I ordered a replacement. If the new one doesn't pair then I'll be searching for more trouble shooting videos. It just stopped working 🤔
@@elizabetht1323 so none of your remotes work now?
I only had one remote that came with the house. And it just stopped one day. I changed the battery and it still didn't work. The new one should be coming today and I'll see if it can pair.
@@elizabetht1323 I actually recommend clearing all codes when you move into a home just in case the previous owner still has remotes or Homelink devices set up to open the doors. This is typically done by holding the learn button for 10-15 seconds.
Wow, an LED light bulb was my problem, thanks!!! 🙂
Great! I know how frustrating that is.
Awesome video saved me some money thank you
Great! I’m glad it worked for you too!
Thank you! Saved the day!
Glad it helped!
Thanks man saved me alot of talk from my dad 👍👍
MrNoFun10 Haha. I’m always happy to help out.
Thank you so much for this. It was soooooooo easy. Happy new year!!
It’s definitely a quick and easy fix once you know the process. Happy New Year to you too!
Thank you. You were better than the instructions on the unit itself!
Coy McDaniel That is a great compliment. Thank you.
My garage door opener is too sensitive, I don't have to press the button only a nudge will open the door, how can I fix that?
Good info. Thanks
Thanks man this videos is and simple and help me I have it exactly same issue and your tips help me a lot thanks for video
Great! I’m glad it worked for you too!
Not sure if I’m in the right video. My problem isn’t that there’s no connectivity or program to the remote. The problem with my unit/controls is that the door will close partially, sometimes it just “jumps” a bit, and goes back up. Sometimes it’ll go down a few feet, then stops and goes back up. Sometimes it works fine. Almost like it has a mind of its own. This happens with both remotes, the wall activator, and the pad on the outside. Thoughts ???
Your tracks could be out of alignment.
Thanks! It was the led thing for mine
Great! I’m glad you were able to figure it out.
Instant fix. Thank you so much.
That’s great!
Thank you
I am following the steps but seems like the learn button is not taking the signal.
The learn button light up after I press it but when i try to program the remote opener it does not pick the signal, tried different remote. What would you recommend?
Did you change the batteries in the remote?
1:41 - I get to this exact step, fresh battery in remote.. and nothing happens.
Nothing. No bulb comes on. No click.
Nothing.
And I have the exact same remote and opener. I'm at a loss.
Do you have another remote you can try? Perhaps the remote went bad.
@@TightWadDIY Same for the other remote. Fresh battery in that one too. Do remotes go bad? Unit is over 15 years old.
Hello, thanks for unloading the video. I do have a question regarding built in car remote garage opener. Is this the same procedure to program the factory car remote? Thanks.
It depends on the system. On our car, the car actually learns the signal of the remote we have instead of the opener learning the signal of the car.
You got me thinking about this. I have a few brands of CFLs and LEDs. If I take a portable AM radio next to them, some generate a lot of broadband RF noise and others are very quiet. I believe that the offenders don't have good filtering on their inverters and you can hear the distinctive square waves which generate many odd harmonics. The same problem exists with some solid state fluorescent light ballasts (I have in my garage.) The problem can also occur with some usb power supplies. I have an amplified TV antenna whose power supply blocked out all AM radio reception until I changed the power supply. It's strange that GDOs have their antenna hanging down blocked by a metal garage door which can be a problem from the outside.
Thank you for the tips.
My pleasure.