Xbox 360 RGH 3.0 (Trinity)
HTML-код
- Опубликовано: 18 апр 2023
- In in this video I'm installing RGH 3.0 on Xbox 360 (Trinity).
Mini-dremel tool I'm using:
amzn.to/3vqkElz (Amazon US)
amzn.to/3J1wq9v (Amazon UK/Europe)
s.click.aliexpress.com/e/_DB1... (AliExpress)
The following guides provide more information on Xbox 360 motherboard revisions and RGH specific information.
xbox360hub.com/guides/rgh-3-g...
Here's a god video on opening 360 Slim
• How to take apart disa...
Here's more info on pico flasher: weekendmodder.com/picoflasher...
Please consider subscribing to my channel.
/ retrotechcorner
/ retrotechcorner 
Игры
You were litterally the only one showing everything one by one on what you are doing with your flasher, when you unplug the console, when you plug it back etc, i thank you so so much for that and for not cutting any parts. Thank you!!!
Good work im going to attempt a rgh3 next week just waiting on the parts coming. Great video btw, I've subbed and look forward to seeing your future videos :)
Nice video tutorial :) after flashing do i need to desolder back cables with resistor? Or those two cables must stay?
Hello good video, I have a question eh seen other video and when they do rgh si en chip to l end connect some cables or voltage regulators
ciao fratello sono in ritardo per fatti qualche domanda,sono nuovo e diciamo vorrei la mia xbox 360 come fate voi .Volevo dirti essendo che la mia e originale con v17559 posso farla con picoflascher o usare il programer v3 come prima volta mettere direttamente RGH3 essendo una originale, e la resistenza deve essere per forza di 3k omm, ti prego se puoi rispondermi grazie e una buona giornata
What type of wires are you using?
Copper or tinned copper?
Could you take a look at my main board
Can i use a tl866 ii plus or a raspberry pi to read the nand? Dont feel like buying extra hardware 😅
Look at the Picoflasher
When i connected the xbox 360 to a tv the screen stayed blank no matter how many different screens and cables i tried. I still have not seen the Xell screen to get the ip address or cpu key.
Must press disk Trey while console is off
Can you help ?
after writing ecc
I connected it to tv through hdmj but nothing is showing on the screen power green light is blinking
Same here
Assuming you've read the NAND and the two images were identical, you created cell image (ecc) and wrote it back without any problems then you'll need to go back and check if all the wiring is correct (around 4:30 in the video).
I'm also assuming you have Trinity board...
@@RetroTechCorneri have rechecked all the wiring nothing is wrong there
Yes this is trinity
Do you solve it ?
@@vaibhavsharma816just did a Trinity rgh 3 last week and used a10k resistor. It was a black screen no matter what. I dropped it down to a 5k and it booted first attempt. Guides say from 3k to 10k, so if you or anyone use a 10k with a black screen, try dropping to a lower resistor.
What temperature do you set your iron at
It's usually 300-320 C but depends on the job. Just make sure your iron is calibrated. But my advice is to get some spare/faulty board (any board, not necessarily xbox) and practice with different temps. That way you'll see the results and you'll know your iron "behaviour".
@@RetroTechCorner Is a micro solder point recommended for ease or a requirement?
Read nands, create xell, write xell but when i turn on xbox i get no display....
Follow the video and make sure all the points are soldered correctly.
Did you solve it ?, unfortunately tha same problem happened with me, im sure everything is perfect but i think rgh 3 had high chance to fail
They use picoflash
Can I hack without ship ?
only with a ship for sure, better not risk it
please name the mini dremmel
Links are now in the description.