Check out our harness! www.dirtroadcredmedia.com/pro... Interior Rock Light: amzn.to/4fuexPr Rough Country Chase Light: amzn.to/4fvSBmW LED Whip Light: amzn.to/46vyYrf
I have a whip I never installed simply because of how annoying the wiring was going to be. This is exactly what I need to make that job a whole lot easier!
Would like to see you make this for the JKU. It looks like it makes installation so much easier. If you already make this for the JKU add it back to your store please. Been following you since CJ Off Road. Love your videos
This product is absolutely phenomenal! I’m in the process of customizing my plate light and relocating it to my driver side back light. I’m basically getting a new plate holder custom and this would definitely help me wiring up the lights which is basically motorcycle plate lights so the head of the lights are very small and flushed which would fit so perfect in the license plate frame without anything sticking out. You basically found my problem and fixed it with a simple fix without me slicing splicing soldering wires. Thank you!!!
I mirror DistinctionDino’s reply. Half these SWFLA Jeeps are 2-doors. As for new ones. I feel ya. NO ONE wants to have a minimal profit margin 2-door sitting on the lot when they could have 127 4-doors, 83.2% of the 4XE, and most of them having been there for at least 100 days since no one is buying $60,000+ Jeeps at 8% interest anymore. I LOVE my 2-door and rekindle that every time I drive it more than 5 minutes.
That’s awesome! My wife has a disc light behind the spare tire and I have it connected to the tow hitch light connector because I didn’t want to cut any of the jeeps wires so I think this would work great. I am excited to be able to clean up my wires that hang below the Jeep bumper, thanks.
Awesome product I was actually just about to tackle hooking up a whip light, license plate light and reverse light! This will make it so much easier and cleaner!
Great solution for those new Motobilt taillights with the bajas. I’ll be ordering these when I get my hands on the lights. Great content! Thank you! Hope to see you at a jeep show soon.
You had me at plug and play. I’m a fairly newish Jeep owner and find myself hesitant on mods involving electrical components but this made it look sooo easy
That LED whip mount would be fine *off-road* but in many, if not ALL jurisdictions, you can only run lights on the back that are red (except plate light and bak up lights) on the rear. Let the flaming begin. Nice wire harness you developed!
@@DIRTROADCRED exactly my point. Just have to remember to turn them off before hitting the road! They would look awesome in a group on a trail at night.
This harness is going on my build list for the wrangler I just purchased, it will save labor! I’ve been looking to mount a single rear light and I think I’m going to order a license plate relocation kit and utilize that mount for my light where you thought of mounting Rough Country light . I might even use that RC light in your video to eliminate the stock 3rd brake light.
I disliked the whole wiring through the vent on mine, so i used the rubber plug/grommet that is on the passenger-side of the tire carrier. You can fish the harness through that oval hole that is just above the first christmas-tree clip holding the factory harness to the tailgate, and right out the back. Then just cut a slot or a hole into the rubber plug/grommet for your harness to go through. I recently did this with the license plate light extension that came with the teraflex relocate kit, and it looks almost factor when you are done. I even fished the wire through the braided sleeve the factory harness uses instead of ziptying it to it.
Anything that makes wiring easier I’m definitely for! I need to get one of these for our jeep. I just did the license plate relocation bracket to the spare tire I could use a license plate light.
if you remove/unravel a small amount of the tape on the wire tunnel/check strap you can route wires through it alongside the factory wiring. This allows for a stealth install. I have done this on multiple accessories/parts and makes for a very clean install.
I like the product. My ONLY two asks would be 1) A constant power on, even if it was 10A or less, and 2) Don’t bundle all the wires so that I can run the backup circuit through the central body plug under the jack and under the vehicle. I would imagine that a “T-Tap” like this would be easy in a gladiator since the 7-pin already has these circuits wired in. Beautiful family, Matt. And that means you too, RYAN!!!
Our new Tail Light harness is compatible with your Gladiator! Confirmed function and fitment this evening on a loaded 2022 Gladiator and everything was exactly the same! We still have some harnesses available from our first batch! They sure are selling out quickly, thank you for all the support!!!! www.dirtroadcredmedia.com/products/jeep-wrangler-jl-jlu-taillight-harness-extension-plug-n-play
Thanks for the vid. I’m an electrical newbie. Can you wire multiple products at a time to those wires or just one product? For ex. Your led light AND illuminated whip at same time?
The harness is a really good idea, nice job! Say, what happened to the rear cargo shelf you guys had? Any chance of that ever coming back into production?
Going to do a group order on them again soon, the problem is we buy them in large batches and it can get quite expensive to have so many sitting around!
New subscriber, love the videos. Super informative and helpful. Keep it up guys. I may need to get one of your harnesses. Seems like a great addition. ❤
Dude that harness is awesome. Can one be installed on the driver side light harness as well? That way you can use the passenger side one for tailgate lights and the driver side for say roll cage or under bumper lights.
Oh, I did not know that. Thanks for the info. But still very useful. Especially when all these jeeps need better back up lights to see at night with the camera.
How would you wire the Teraflex with your wiring harness? you mentioned you did this prior to using the harness and it took forever. What about with it?
Great content as always, but WTH(where the heck) is the 2018-2024 Jeep Wrangler JL 2-DOOR Rear Cargo Shelf? I been waiting patiently... Also, make a harness that plugs directly into the factory tow connector that would very beneficial too!
Hey buddy, I'm a little confused on what you've done, unless you tell me you have a "magic device" in the harness. How is it that you're able to just put this harness in and avoid Can Bus faults? I thought the Can bus system would catch imbalances electrically and trigger the faults that are used to let us know something is wrong etc. For example, you hooked up multiple things and didn't trigger a fault? Was that because you never reached the amperage limit that would trigger faults or?? Just curious.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Check out our harness!
www.dirtroadcredmedia.com/pro...
Interior Rock Light: amzn.to/4fuexPr
Rough Country Chase Light: amzn.to/4fvSBmW
LED Whip Light: amzn.to/46vyYrf
I have a whip I never installed simply because of how annoying the wiring was going to be. This is exactly what I need to make that job a whole lot easier!
Would like to see you make this for the JKU. It looks like it makes installation so much easier. If you already make this for the JKU add it back to your store please. Been following you since CJ Off Road. Love your videos
Thanks for watching , going to work on a JK connector!
Will be looking out for it.
This product is absolutely phenomenal! I’m in the process of customizing my plate light and relocating it to my driver side back light. I’m basically getting a new plate holder custom and this would definitely help me wiring up the lights which is basically motorcycle plate lights so the head of the lights are very small and flushed which would fit so perfect in the license plate frame without anything sticking out. You basically found my problem and fixed it with a simple fix without me slicing splicing soldering wires. Thank you!!!
It would be nice to get a tailights harness for the TJ
Really neat products! Spent the last 2 days researching 2-door's. Unfortunately the ones I found are over 800 miles away. Loving your channel.
Dang! Thanks for watching
Damn I feel like half the jeeps in Florida are 2 door. Don’t know they were “rare”
I mirror DistinctionDino’s reply. Half these SWFLA Jeeps are 2-doors. As for new ones. I feel ya. NO ONE wants to have a minimal profit margin 2-door sitting on the lot when they could have 127 4-doors, 83.2% of the 4XE, and most of them having been there for at least 100 days since no one is buying $60,000+ Jeeps at 8% interest anymore.
I LOVE my 2-door and rekindle that every time I drive it more than 5 minutes.
That’s awesome! My wife has a disc light behind the spare tire and I have it connected to the tow hitch light connector because I didn’t want to cut any of the jeeps wires so I think this would work great. I am excited to be able to clean up my wires that hang below the Jeep bumper, thanks.
That’s genius! Something so simple can really make your life so much better!
Thank you!
Awesome product I was actually just about to tackle hooking up a whip light, license plate light and reverse light! This will make it so much easier and cleaner!
Great solution for those new Motobilt taillights with the bajas. I’ll be ordering these when I get my hands on the lights. Great content! Thank you! Hope to see you at a jeep show soon.
Thanks for the kind words, hope to see you as well!
Nicely done guys! The harness is awesome, sometimes the best solutions are the simplest!
Thanks a bunch!
Awesome, definitely something that has been needed for a while for mods. Great job.
Thanks!!!
You had me at plug and play. I’m a fairly newish Jeep owner and find myself hesitant on mods involving electrical components but this made it look sooo easy
Very simple to do!
That LED whip mount would be fine *off-road* but in many, if not ALL jurisdictions, you can only run lights on the back that are red (except plate light and bak up lights) on the rear. Let the flaming begin.
Nice wire harness you developed!
You are correct, however at shows, off-road , etc these are commonly used!
@@DIRTROADCRED exactly my point. Just have to remember to turn them off before hitting the road! They would look awesome in a group on a trail at night.
This harness is going on my build list for the wrangler I just purchased, it will save labor!
I’ve been looking to mount a single rear light and I think I’m going to order a license plate relocation kit and utilize that mount for my light where you thought of mounting Rough Country light . I might even use that RC light in your video to eliminate the stock 3rd brake light.
Awesome idea!
Wow this will make hooking up lighting so much easier- great product!!! Nice video!
Yes it does!
I WILL be using this for JL I just bought for my wife! Amazing work you guys! 🙌
Love it! Thanks for the support!
Great job guys. Solving problems and making life just a little easier is what innovation is all about.
Bookmarking this video for when I decide to add something in the back. This is such a good idea and a huge time saver for sure.
Thanks for the kind words!!!
I disliked the whole wiring through the vent on mine, so i used the rubber plug/grommet that is on the passenger-side of the tire carrier. You can fish the harness through that oval hole that is just above the first christmas-tree clip holding the factory harness to the tailgate, and right out the back. Then just cut a slot or a hole into the rubber plug/grommet for your harness to go through. I recently did this with the license plate light extension that came with the teraflex relocate kit, and it looks almost factor when you are done. I even fished the wire through the braided sleeve the factory harness uses instead of ziptying it to it.
Great tip!
that new product is Genius! it will make everyone's life so much easier!
That’s the plan!
Just ordered one, looks to be an awesome product. Love the convenience, keep killin it guys!
Thanks! Will do!
Anything that makes wiring easier I’m definitely for! I need to get one of these for our jeep. I just did the license plate relocation bracket to the spare tire I could use a license plate light.
Thanks for the kind words!
Such a clean way to install. Now I have more to put on the want list!
Great job guys. The harness is a great product that is simple and easy to hook up. Congrats!!!
Yes! Thank you!
Definitely need one for a gladiator. Also my wife and I will be at the jeep invasion in Tennessee. Looking forward to meeting you.
Testing the gladiator tonight, from what I read they are the same plug and pin locations!
Gladiator fitment confirmed! Works flawlessly!
@@DIRTROADCRED are you going to bring some to Tennessee
These look great - would be nice for wiring up reverse lights and aux cabin lights in rear.
love the harness. I need one for my hitch wire harness!! thanks Guys for another great video!!
Thanks for watching!
You need to get some wago connectors. It will make a secure connection, and will make it east to change to another setup. Nice video
Great idea!
Need this for the JK too
Going to work on one!
Cool!!! Perfect for my new 2024 Jeep Willy’s
Yes!
That's a Really cool set up. Would look great on my 23 2 Dr Rubicon
Thanks for watching!
Real like what your doing with the easy wiring
It’s amazing how something as simple as that can make you smile. Anything that makes the install process easier is a win in my book!
Thank you!
Awesome harness. Excited to try it out.
Thanks guys!!
Great idea for the reverse light. Can always use more light when backing up
Thank you!
if you remove/unravel a small amount of the tape on the wire tunnel/check strap you can route wires through it alongside the factory wiring. This allows for a stealth install. I have done this on multiple accessories/parts and makes for a very clean install.
Yup definitely makes a clean install, since I had it all apart that's what we did on my tailgate !!
Cool product! Nice job guys
Thanks so much!
Congrats on another great product.
Thank you!
I love seeing y’all come up with new products. Can’t wait to see y’all at Jeep Invasion.
Thank you! See you soon!
Great product! Definitely something I’ll be interested in for my Jeep.Keep up the awesome videos!👍
Love the channel, thanks for all the hard work. Nice Harness, this will be very useful for my upcoming spare tire delete!!
Thanks for watching!!
Love your Dad’s Gobi!
This is exactly what I’ve been looking for. Great job!
Thank you very much!
Love it! This makes things soo much easier
Yes it does!
Pretty cool you have your own stuff out there. Great vid, thanks.
Thanks Phil!
Love the channel and the innovation! Well done!
Thank you!
I like the product. My ONLY two asks would be
1) A constant power on, even if it was 10A or less, and
2) Don’t bundle all the wires so that I can run the backup circuit through the central body plug under the jack and under the vehicle.
I would imagine that a “T-Tap” like this would be easy in a gladiator since the 7-pin already has these circuits wired in.
Beautiful family, Matt. And that means you too, RYAN!!!
lol love it Luke, thanks!!
Finally Yaya. Great for reverse lihht on rear bumper, license plate those brake light additions that go on Top of the hardtop 5star
Very simple to do!
Great idea, love the harness.
Thank you!
If I WIN I WIN if not I’ll still buy one ! It’s about time someone made this , it was a crap shoot rewiring my when I did the tire delete.
Thanks for the comment!!!
Make a harness for the front DRL’s. That would make hooking up an LED light for the side fender vent easy.
Our new Tail Light harness is compatible with your Gladiator! Confirmed function and fitment this evening on a loaded 2022 Gladiator and everything was exactly the same! We still have some harnesses available from our first batch! They sure are selling out quickly, thank you for all the support!!!!
www.dirtroadcredmedia.com/products/jeep-wrangler-jl-jlu-taillight-harness-extension-plug-n-play
Great job on the harness!
Thank you!!
Great product, I could definitely have used this for my oracle reverse lights
Thank you!!!
Just ordered - Fantastic idea!
Thank you for the order!
Love the harness.. hope to see you at jeep invasion
Thank you !
How you can activate the chase light mode on the RC Lights?
Definitely I am going to buy your harness
I have a ring behind the spare. It has running, brake, backup, and turn signals. Your harness will help, but I will still need to splice 2 others.
Dang that's a lot of wiring.
Very cool product! Bring some to the SMJI to sell.
Deal!
This is a great idea. Now I need to figure out what I want to hook up back there.
LOL the possibilities are endless!
Thanks for the vid. I’m an electrical newbie. Can you wire multiple products at a time to those wires or just one product? For ex. Your led light AND illuminated whip at same time?
I didn't know I wanted a whip until I watched this!
like always good upgrades stuff on this channel i love it thx to share ur passion
Thank you for the kind words!
Great video. the harness is a great idea
Thank you!
Anythink to make dealing with electrical wiring easier is always a plus. Take my money!! 💰 💰💰
lol thank you!!
wow! I am thinking this will help me install the Oracle rear bumper lights!
Yes it should!
Your wife is a smart lady cause I had no idea y’all had merch!
Very nice job! 🎉
THIS! I love! I’m wanting to do flush mount lights and the tailgate light on my gladiator. Would this work for me?
Going to test them tonight on a gladiator stay tuned!!!
Gladiator fitment confirmed! Works flawlessly!
way cool, could you run two of them off each tail light?
This is set up for the passenger side, I’ll check the pin locations but I believe the driver side is a little different
The harness is a really good idea, nice job! Say, what happened to the rear cargo shelf you guys had? Any chance of that ever coming back into production?
Going to do a group order on them again soon, the problem is we buy them in large batches and it can get quite expensive to have so many sitting around!
realy like the videos i just bought a 2018 rubicion .going to do some add ons
Thanks for watching!
Great work guys 🤙🏻
Thanks!!!
New subscriber, love the videos. Super informative and helpful. Keep it up guys. I may need to get one of your harnesses. Seems like a great addition. ❤
Thanks for watching!
I have wips lights like those.. but couldn't connect my reverse light.. but I have a jeep renegade. It's 2015
Very cool, I was actually about to order it and pom pom pommmmmm no shipping in Canada. Well I guess I'm good to wire thing the old ways :D
Shipping to Canada is now available! Thank you for your support!
nice harness! good though for sure
Dude that harness is awesome. Can one be installed on the driver side light harness as well? That way you can use the passenger side one for tailgate lights and the driver side for say roll cage or under bumper lights.
These are designed for the passenger side, the drivers side pins are a little different!
Oh, I did not know that. Thanks for the info. But still very useful. Especially when all these jeeps need better back up lights to see at night with the camera.
Need this for the JK
awesome! would love to see a gladiator install video. hope all is well guys :)
Had a lot of interest in gladiator, I’ll play around with one soon!
Gladiator fitment confirmed! Works flawlessly!
Awesome video especially upgrades
Thanks!!😊
Need this for the Gladiator too!
Testing on a gladiator tonight, from what I have read the plug and pins are in the same spots!! Stay tuned!
Gladiator fitment confirmed! Works flawlessly!
Yes! Make one for the Gladiator, please!
Will check the wiring!
Gladiator fitment confirmed! Works flawlessly!
How would you wire the Teraflex with your wiring harness? you mentioned you did this prior to using the harness and it took forever. What about with it?
Love the harness. It has a lot of potential. 14:03 we used a cigaret lighter plug for our whip and plugged into the outlet inside.
Good tip!
Is there a TJ versión In a future?
Great content as always, but WTH(where the heck) is the 2018-2024 Jeep Wrangler JL 2-DOOR Rear Cargo Shelf? I been waiting patiently... Also, make a harness that plugs directly into the factory tow connector that would very beneficial too!
We have been playing with the idea, the problem is the 2-door shelf will cost more than the 4-door and we weren't sure if there is enough interest
@@DIRTROADCRED 2 doors get no love...
Love your channel! Can you do this for the JK?
Going to work on a JK version!
Wait did you do a harness for a jeep renegade.. mines a 2015.
Love this harness!
Thank you!!!
Does this work on the JK/JKU? I would love to have one if they do.
Would love something for a gladiator. Great product.
Testing it tonight on a gladiator tonight, from what I have read they are the same plug and pins!
@@DIRTROADCRED lmk. Thanks
Gladiator fitment confirmed! Works flawlessly!
ordered! thanks
Hope you like it!
Hey buddy, I'm a little confused on what you've done, unless you tell me you have a "magic device" in the harness. How is it that you're able to just put this harness in and avoid Can Bus faults? I thought the Can bus system would catch imbalances electrically and trigger the faults that are used to let us know something is wrong etc. For example, you hooked up multiple things and didn't trigger a fault? Was that because you never reached the amperage limit that would trigger faults or?? Just curious.
Always need easy connection for more lights!!
Absolutely!
Did I miss or would that whip work as a break light and reverse with that harness? Or is it not smart enough for those features automatically?
The whip light we got did have a brake light feature!
Just watched this video and love this design! Will you guys have any at the Smoky Mountain Jeep Invasion?
Thinking we will bring some!
@DIRTROADCRED if you do, I'll definitely buy one! I'll be in the Show & Shine all weekend so I'll make sure and find you guys.
Who makes those wheels? Those are pretty cool!
They are black rhino!
THAT’S FKN AWESOME! Love it