The Dash Poncho, Primo Workz cup holder arm rest Distinction Applied arm rest cover products in my eyes are a no brainer for every Jeeper. Also the new exhaust sounds good 👍👍Lastly i do believe that it would be a good idea to showcase other smaller vendors and or new products while ya'll are at Great Smoky Jeep Invasion. It's all great for content and it helps the small businesses gain the exposure that might sky rocket their sales or at least get the much needed feedback that might need going forward.
After watching this video. I came up with a new drinking game- every time you say the word “actually” i have to take a shot of whiskey. And let me tell you… my bottle is empty.
What would be cool is if with your modified exhaust you came up with a way that you could add the normal rear, under carpet storage area that is much larger.
Have you mentioned stability control on a 24 2 door rubicon that I’ve missed? Is it really worth going 37” or staying 35 with oem specs to have stability control functioning as they should! I think it’s very important talking about stability control or disabling it
Love these videos. I’m always looking for something new. The arm rest people also have for back door to protect from dogs and kids. I need something to protect the cup holders on the floor of the back seat from dog claws. My old dog jumps in and then up to the seat. 🤔
I just installed a receiver hitch on my new Jeep yesterday. I had to take my rear bumper off, put it on & then put my bumper back on & it was triple digits yesterday. What I call a triple shirt day. Changing my shirts 3 times. I still have to wire the harness. In going to buy the military style holder for my seats that yeah showed. It will go great with my Sarge Green exterior. I’m also going to exchange my interior dash with Sarge Green w/gold accent by Distinction Applied. I’m not feeling the red at all.
I would super interested in that exhaust setup. I’ve beat the crap out of my 392 muffler and tips, and while I love the active valves, I hate how low it hangs.
I found the Australian hood. The US Rubicon hood number is #82215373AD. The Australian Hood is #68281965AF. In my reading they have to have a higher bump in the middle to make it more pedestrian friendly. I really like that look though.
The turn down tip exhaust (to keep water intrusion down) would be slick and sell well if the price is right. I'm sure it'll be FAR cheaper than most 392 exhaust options and work great. I would have been interested if I didn't get this BANGIN' AWE exhaust.
Love your videos and just started watching you guys about 2 months ago. Not sure if anyone else would be interested in a video like this but I’m looking into upgrading the speakers in my 4 door JL. I was curious if Ryan is going to upgrade his speakers since his is the base model or if one of the other jeeps will get a speaker upgrade? Just curious what brand you would go with and how you would do it?
I don't get the dash protector. Why not a sunshade? The sun hits the whole dash behind it. And what a pain in the butt to deploy it. The only thing it protects the dash from is the driver or passenger sneezing. I just don't get it. Great video! Love most of the stuff. I just think that dash protector is a massive joke.
I ordered one of those console covers and no idea how you got it to fit on your arm rest but mine i cant get it to go down the backside at all. Was so disapointed...I have a 2024 392 Final Edition so did they make the arm rests different from your regular 392?
@@DIRTROADCRED yes, but how do you get it down into that back lip of the arm rest? I emailed the manufacturer and they said it does fit and to install it from the back seat. I did try it but geesh it just would not go on.
Yea i agree that the back end is not my style at all. That is the thing about Jeeps. You make it what you want because they are so versatile. I am sure he hates the back end of my jeep because it is not his style. 😊
i still don't understand how you can get your jeeps to pass PA inspection every year with the mods you have lol. especially the tires extending from the fenders
Don't wanna be negative, but that dash poncho thing seems useless to me. You're going to get mud splash and whatnot while moving, but you're not going to have it on while moving. Plus it doesn't block sunlight through the windshield. If anything, if I was worried, I'd put one of those classic windshield sun shields up, and toss a towel over the dash while I was parked, if I was worried about sun from the top being off. Everyone should have a towel anyway, and it would be FAR more versatile and cheaper. If anyone wants to correct me, I'd be cool with that. I usually try to stay positive, but that invention is so pointless, it bothers me.
Jon from Dash Poncho /JFTops here. I created this after getting caught on a trail in a rain storm and lost my electronics. Yes, it helps protect from sun, but the primary purpose is to protect from rain. When you flip the visors down and you are topless, your dashboard electronics are protected. Rain protection is our primary focus for protection. Hope this helps.
I enjoy your content but not sure what camera you’re using, the focus lock is terrible. It’s very slow to focus and there is a lot of blurry content to the point it’s distracting. I’ll still watch, just wanted to provide some feedback.
Can we not with these "mufflers"? I can't tell you how many times I've been awakened in the wee hours of the morning by yahoos driving by my house with these. If the purpose of the loud noise is to compensate, they are giving the reverse message.
Check out the products shown here:
Kentrol License Plate Mount: amzn.to/3WTzrA6
Maiker Seat Organizer: amzn.to/4fEyq6G
Factor 55 Fairlead: amzn.to/3SFnqfa
Diode Dynamics Headlights: amzn.to/3SFpNPi
Mirrors: cmmoffroad.com
Dash Poncho: amzn.to/3YweAUV
Arm Rest: distinctionapplied.com/?ref=DIRTROADCRED
Yooooooooo. Delaware shout-out! As a first-time Jeep owner, I'll be hitting the drive-on beach there myself this coming year.
I’m digging the wall!!!
Thanks for sharing more Great Ideas for our Jeeps‼️
I've used the same molle panel to get "hunting ready" quickly. I love it.
Cool stuff. If I remember when we get back to the states I’ll send something from the JT that we’re driving from Alaska to Argentina. 🍻
The Dash Poncho, Primo Workz cup holder arm rest Distinction Applied arm rest cover products in my eyes are a no brainer for every Jeeper. Also the new exhaust sounds good 👍👍Lastly i do believe that it would be a good idea to showcase other smaller vendors and or new products while ya'll are at Great Smoky Jeep Invasion. It's all great for content and it helps the small businesses gain the exposure that might sky rocket their sales or at least get the much needed feedback that might need going forward.
After watching this video. I came up with a new drinking game- every time you say the word “actually” i have to take a shot of whiskey. And let me tell you… my bottle is empty.
I saw this comment at 1:36, by 4:25, im drunk
This arm rest actually makes sense. It looks comfortable.
I have one of their armrest covers also. They are the best!
Where can I get one? The link in the description doesn't seem to work. The website doesn't seem to offer it.
Dammit Matt, I’ma need a PAINT MATCH BRO!! That silver is KIL-LING me.
I kinda like the contrast… think bed liner black would look killer though. Except the rear door. Paint match that
What would be cool is if with your modified exhaust you came up with a way that you could add the normal rear, under carpet storage area that is much larger.
Love the wall!
I love your videos. Every. Single. One.
Omg. Lol. You are the devil on mods. 😂 . I love my door cup holder❤. Now I need more.
Great vid love the taillight harness
excited to hopfully meet you and Ryan st the TN Jeep Invasion!
Wondering if the dashboard poncho was installed correctly...maybe the suction cups go at the bottom?
MATT!!!!!! OMG CJ OFF ROAD!!! I knew I had see you on a different channel! Why did i NEVER figure that out LO!!!!
Cool viewer Jeeps from Australian subscribers!! Loved some of those products- keep those ideas coming. See you at the Smokey Mountain show
Have you mentioned stability control on a 24 2 door rubicon that I’ve missed? Is it really worth going 37” or staying 35 with oem specs to have stability control functioning as they should! I think it’s very important talking about stability control or disabling it
Not a bad point, Ryan has 35s on his and it does well
Great vid. Thanks much!
You guys should check out the life without doors products. As much as you all run with top and doors off, their products would be very valuable.
Well check them out
Love these videos. I’m always looking for something new. The arm rest people also have for back door to protect from dogs and kids. I need something to protect the cup holders on the floor of the back seat from dog claws. My old dog jumps in and then up to the seat. 🤔
I just installed a receiver hitch on my new Jeep yesterday. I had to take my rear bumper off, put it on & then put my bumper back on & it was triple digits yesterday. What I call a triple shirt day. Changing my shirts 3 times. I still have to wire the harness. In going to buy the military style holder for my seats that yeah showed. It will go great with my Sarge Green exterior. I’m also going to exchange my interior dash with Sarge Green w/gold accent by Distinction Applied. I’m not feeling the red at all.
I would super interested in that exhaust setup. I’ve beat the crap out of my 392 muffler and tips, and while I love the active valves, I hate how low it hangs.
I found the Australian hood. The US Rubicon hood number is #82215373AD. The Australian Hood is #68281965AF. In my reading they have to have a higher bump in the middle to make it more pedestrian friendly. I really like that look though.
Day 10 asking Jeep to bring back Mango Tango Pearl.
What wiring harness did you use for the Tyger hitch?
The turn down tip exhaust (to keep water intrusion down) would be slick and sell well if the price is right. I'm sure it'll be FAR cheaper than most 392 exhaust options and work great.
I would have been interested if I didn't get this BANGIN' AWE exhaust.
Definitely looking to ditch the heavy obtrusive exhaust system. Would be interested in a delete kit.
Can you make that 392 exhaust compatible with the Motobilt gas tank? All of us 392 owners need more fuel capacity; I’d be down to be the guinea pig.
Looking forward to having a cool one with yall in TN. Hit me up and let me know what booth you guys will be at. The wall looks great 👍👍
Love your videos and just started watching you guys about 2 months ago. Not sure if anyone else would be interested in a video like this but I’m looking into upgrading the speakers in my 4 door JL. I was curious if Ryan is going to upgrade his speakers since his is the base model or if one of the other jeeps will get a speaker upgrade? Just curious what brand you would go with and how you would do it?
Have a question does your guys 2024 jeep wrangler Hear a Rattle noise in your dashboard?
I feel like I watched this before.
I don't get the dash protector. Why not a sunshade? The sun hits the whole dash behind it. And what a pain in the butt to deploy it. The only thing it protects the dash from is the driver or passenger sneezing. I just don't get it. Great video! Love most of the stuff. I just think that dash protector is a massive joke.
Will you be making a plug and play wiring harness for the JK like you did for the JT and JL?
Coming very soon
Will your harness work for the trailer hitch wiring?
I ordered one of those console covers and no idea how you got it to fit on your arm rest but mine i cant get it to go down the backside at all. Was so disapointed...I have a 2024 392 Final Edition so did they make the arm rests different from your regular 392?
Takes a little bit of massaging on the back , but it goes on!
@@DIRTROADCRED yes, but how do you get it down into that back lip of the arm rest? I emailed the manufacturer and they said it does fit and to install it from the back seat. I did try it but geesh it just would not go on.
will the wire harness you make work for wiring up a CB radio? (Cobra)
Ball mount may be a hard target for your head if you roll over.
Hey! Can you link me where you got the gold Jeep emblem and gold hood brackets?
www.distinctionapplied.com/?ref=DIRTROADCRED
@@DIRTROADCRED are the Gold “Jeep” emblems an overlay as well?
Link to the console 392 cover? I did not see it anywhere.
I go surf fishing every week. If I ever run into you, I would have to have you guys over to my Beach Place for a BBQ.
Does he have a center console cover for a JK
You guys going to OC Jeep Fest or heading down to Tennessee?
Tennessee!
do you have a promo code for distinction applied?
The Primo Works makes my arm too high. And you will also hit your arm sometimes while turning. Great idea. Just didn’t work for me.
I am a Fan of your channel, but the backend of your Jeep does not look good, sorry brother
I think it looks good
Did you just comment on his backend? Pause.
Yea i agree that the back end is not my style at all. That is the thing about Jeeps. You make it what you want because they are so versatile. I am sure he hates the back end of my jeep because it is not his style. 😊
Pretty cool it’s a tailgate
Center console maker ?
Distinction applied!
Silver grill?
i still don't understand how you can get your jeeps to pass PA inspection every year with the mods you have lol. especially the tires extending from the fenders
I would like that muffler delete. I just cut the muffler pipes at the downturn.
✌️
I have a factory hitch, I guess he didn't because it's a base model?
Correct!
Don't wanna be negative, but that dash poncho thing seems useless to me. You're going to get mud splash and whatnot while moving, but you're not going to have it on while moving. Plus it doesn't block sunlight through the windshield. If anything, if I was worried, I'd put one of those classic windshield sun shields up, and toss a towel over the dash while I was parked, if I was worried about sun from the top being off. Everyone should have a towel anyway, and it would be FAR more versatile and cheaper.
If anyone wants to correct me, I'd be cool with that. I usually try to stay positive, but that invention is so pointless, it bothers me.
I saw that, also...was wondering if he installed it wrong...maybe the suction cups go at the bottom of the windshield...not the top.
Jon from Dash Poncho /JFTops here. I created this after getting caught on a trail in a rain storm and lost my electronics. Yes, it helps protect from sun, but the primary purpose is to protect from rain. When you flip the visors down and you are topless, your dashboard electronics are protected. Rain protection is our primary focus for protection. Hope this helps.
So, if you drive a 392, CrossFit, are a vegan and you scuba dive, what do you tell people about first?!?!?! 😂
I enjoy your content but not sure what camera you’re using, the focus lock is terrible. It’s very slow to focus and there is a lot of blurry content to the point it’s distracting. I’ll still watch, just wanted to provide some feedback.
Noted. We use a lower f stop for lighting purposes which means a shorter focal length
Can we not with these "mufflers"? I can't tell you how many times I've been awakened in the wee hours of the morning by yahoos driving by my house with these. If the purpose of the loud noise is to compensate, they are giving the reverse message.
392 owner here I am interested in the exhaust 😮