Это видео недоступно.
Сожалеем об этом.

Woodturning - Pocket Boxes - Craft Fair Impulse Buy Item

Поделиться
HTML-код
  • Опубликовано: 18 сен 2021
  • For those shoppers who aren’t looking to spend a lot of money on some hand turned items at the craft fair, it’s always good to have some lower priced items that might grab their attention.
    In today’s video I’ll turn a few pen blanks into pocket boxes which is a quick and easy beginners project for woodturners. It’s a low-priced item that sells well at craft markets.
    If all of you woodturners are like me, you’ve probably stock piled hundreds of pen blanks. This is a good way to use some of them if you’re tired of making pens and finials.
    I begin by securing the blank in the chuck and marking out the top, bottom and where I plan to cut the piece in two. It’s then drilled with forstner bits, and a tenon shaped to fit the lid. You can design any exterior shape.
    Feel like buying a beaver some wood?
    www.buymeacoff...
    Ack’s Abrasive and Polishing Paste. If you would like to try some save 10% off your order by use the coupon code "hodge10" at checkout!!
    ackswoodpaste....
    Get the Freshest CA glues in the market at Starbond www.starbond.c...
    Use Code HodgePodge at checkout to save 15% amount on your purchase
    Checkout my Etsy Store:
    www.etsy.com/s...
    HodgePodge WoodWorks Merch here:
    teespring.com/...
    Inclined to help the project fund:
    www.paypal.com...
    Follow me on Instagram and Facebook:
    / hodgepodgeww
    / hodgepodgeww
    Products I use:
    HUT wax - amzn.to/3yYWIlj
    POWER TOOLS:
    Powermatic 3520 Lathe (newer model) - amzn.to/3hUz3h1
    Foredom Woodcarving Kit - amzn.to/3i16cY3
    CHUCKS/MOUNTING:
    Nova Titan III Chuck - amzn.to/3u1ho9v
    Nova Supernova 2 Chuck - amzn.to/33YCU4m
    Oneway Live Center - amzn.to/3wsydMt
    MISC:
    Oneway Wolverine Jig - amzn.to/3hUZRh9
    6in Stainless Steel Ruler - amzn.to/33Z7ElP
    WEN 400CFM Air Filtration System - amzn.to/3yoxc9Q
    8in Compass - amzn.to/3bHTpWu
    Lincoln Omnishield Face Shield - amzn.to/3hDJqpf
    3M Half Respirator - amzn.to/3wq1fMn
    General Tools Moisture Meter - amzn.to/341R1pv
    Plastic Center Finder - amzn.to/3u6JlNd
    Deluxe Rotary Inertia Sander - amzn.to/2RtbXmO
    Robust 9” Small J Curved Tool Rest - amzn.to/3u6GT9J
    FILMING:
    Sony a6000 Mirrorless Camera - amzn.to/3f71QNk
    Ranger 56” Travel Camera Tripod - amzn.to/2SaDhpJ
    FIFINE USB Microphone - amzn.to/3f7lpVC
    Neewer Photo Light Box - amzn.to/3v5G8Pi
    *Some of these links may be affiliate or sponsor links. Any potential purchasing or even clicking on these links will help support Harry and I and help us make even better content.
    Thank you very much for all of your support!
    #woodturning #HodgePodge #beginnerproject #woodworking #woodporn #penblanks #smallbox

Комментарии • 75

  • @jameseubanks1509
    @jameseubanks1509 2 года назад +8

    My compliments on knowing how to use lathe tools. It seems that every video on RUclips shows someone using a bowl gouge for everything. When you brought out that skew chisel, you made us old turners proud!

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад +2

      Haha, thanks! My first turning was a pen with my local club and they steered me in the direction of traditional tools over carbides. I'm definitely not a skew master but I took a class with Alan Lacer years ago.

  • @michaelj2439
    @michaelj2439 Год назад +2

    Excellent video, thank you!

  • @Stable_Studio
    @Stable_Studio 2 года назад

    Nice One Hodge

  • @judithfairchild8620
    @judithfairchild8620 2 года назад +2

    Beautiful little boxes! The grain is fabulous!

  • @copperowlwoodturning5929
    @copperowlwoodturning5929 2 года назад +1

    Beautiful little boxes, Robert. 😉🧐 great use for all the pen blanks. Perfect for doobies. 🤫 nice job. Take care.

    • @richkeelan1312
      @richkeelan1312 2 года назад +1

      Oh hell yea with the doobage thats the first thing that came to my mind well done Hodge

  • @HeckingtonArts
    @HeckingtonArts 2 года назад

    Nicely down Robert

  • @WoodenItBeNice
    @WoodenItBeNice 2 года назад +2

    Hi Rob, What a great idea. Might well be an addition to my table at craft fairs. Thanks Rob. Take care. Cheers, Huw

  • @EclaWood
    @EclaWood 2 года назад

    Sangat kreatif kawanku

  • @AllenOxendine
    @AllenOxendine 2 года назад +1

    Thanks for sharing, nice project. Full View and Like 👍

  • @JiggsysShed
    @JiggsysShed 2 года назад +1

    That's a cool project, great work Hodge

  • @adrianolsen-woodhamwoodtur4980
    @adrianolsen-woodhamwoodtur4980 2 года назад +1

    Great little project Rob…..love them !

  • @mountainviewturning5319
    @mountainviewturning5319 2 года назад +1

    Looks great 👍

  • @PotgieterWoodturning
    @PotgieterWoodturning 2 года назад +1

    Very nice idea Robert. Great project

  • @jimgramstad3604
    @jimgramstad3604 2 года назад

    Ya make it look easy

  • @jackthompson8019
    @jackthompson8019 2 года назад +1

    Neat box. Beautiful wood.

  • @michaelhofer9149
    @michaelhofer9149 2 года назад

    Those are AWESOME! Nicely done!

  • @PBUCKY1969
    @PBUCKY1969 2 года назад +1

    Great idea thanks - and much simplified the way you did it!

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад +1

      Thanks Paully! It's pretty simple but at times you can end up with the two pieces being a bit off center from one another so making one that is meant to be completely flush can be difficult.

    • @PBUCKY1969
      @PBUCKY1969 2 года назад

      @@HodgePodgeWoodWorks I have watched other videos of box making and people seem to make a bit of a song and a dance about it but you demonstrated a more simplified method, cheers - I really like your beaver!

  • @TournageDubois
    @TournageDubois 2 года назад

    Good video, Hodge. Always love your projects and Harry's direction.

  • @TheMessyStudio
    @TheMessyStudio 2 года назад +1

    Cool stuff, Robert!

  • @spiritwynd
    @spiritwynd 2 года назад +1

    Excellent tutorial! You make it look so easy!

  • @lakeshorewoodturner5136
    @lakeshorewoodturner5136 2 года назад

    Great little project. Turned out really nice Robert.

  • @georgekabacinski
    @georgekabacinski 2 года назад

    Nice project. Thank you for sharing it.

  • @RatedRWoodturning
    @RatedRWoodturning 2 года назад +1

    Love making these little boxes as well. Dont do drugs mmmkay

  • @ericwinckler5142
    @ericwinckler5142 2 года назад +3

    Hi Robert, I thought your project was a great idea and I think I can use them to send messages of incouragements to those who need to be lifted up and shown love !

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад +1

      Yeah you could always put little messages or letters in them. That's a great idea.

  • @waynebigfootwoodcraft
    @waynebigfootwoodcraft 2 года назад

    Great little project , 👍 brilliant way to practice tool control as well

  • @mynameis890
    @mynameis890 Год назад +1

    you make it look easy. it took me 3 tries to get one to turn out. kept getting ever so slightly off center, and turning into the tenon of the lid.

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  Год назад

      That's the power of video editing! I had a few that ended up being off center too!

  • @SteveC38
    @SteveC38 2 года назад

    Those Are Cool Hodge!

  • @stephanielovatt2787
    @stephanielovatt2787 2 года назад +1

    Cool little boxes! I have a similar one, in brass, which is a needle case. Very useful, as it takes little space, but keeps the needles warm, dry, and sharp!

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад

      Love the idea! Now I need to market these towards seamstresses too!

    • @judithfairchild8620
      @judithfairchild8620 2 года назад +1

      @@HodgePodgeWoodWorks may I be 1st in line. That is perfect for any kind of handstitching small enough to be put in the bag with a project. Large enough not to get lost. Now how much for 3 of them

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад

      Hi Judith, I'm glad you like them. I usually sell them for about $20 a piece so for 3 I'd give a bit of a discount and do $50 plus whatever shipping is. If you'd like to talk more you can email me at hodgepodgeww@gmail.com
      I can then get more specifics if you want and you can pick which woods you'd like or let me know how long it needs to be to fit these needles.

    • @judithfairchild8620
      @judithfairchild8620 2 года назад +1

      @@HodgePodgeWoodWorks ok I'd say 4 inches on the cases. One of the light, one a medium, and one of either the redder wood or a dark brown. I will contact you tomorrow when I know. I can afford them

  • @DougMilleratWoodSpunRound
    @DougMilleratWoodSpunRound 2 года назад

    Great project. Make life interesting when those expected events take place. You did well with it. You’re the 2nd person I’ve seen making these lately. Guess I may have to jump on the band wagon.

  • @DougMilleratWoodSpunRound
    @DougMilleratWoodSpunRound 2 года назад

    Nicely done on a great little project. It makes life interesting when those unexpected events take place. You handled it well. You’re the 2nd person I’ve seen making these lately. I may just have to jump on the band wagon. Well done.

  • @denisvienat849
    @denisvienat849 2 года назад

    Simple mais très judicieux bravo 👍👏

  • @BrickhouseCraftWorks
    @BrickhouseCraftWorks 2 года назад +1

    Nice work man! This is awesome! I’ve got WAY too many pen blanks lying around and could definitely stand to do something with them. Might have to give this a shot!

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад +1

      Thanks Seth, that was my problem. I get burnt out on turning pens too.

  • @JordanWoodwerx
    @JordanWoodwerx 2 года назад +1

    Hell yeah, eat up those scraps!

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад

      Haha, yes! They are never ending and I'm too big of a wood hoarder to throw any away!

  • @Hemp4eva
    @Hemp4eva Месяц назад

    Whats the name of the drive bit your'e using here? Thanks!

  • @aggieturning5796
    @aggieturning5796 2 года назад +1

    Ok so I now know what I can do with all the pen blanks I have stashed around that my wife doesn’t know about.

  • @Dore60
    @Dore60 Год назад

    👍

  • @thestutteringwoodturner9824
    @thestutteringwoodturner9824 2 года назад

    nice box my friend hope u r doing well brother? who does the voice for harry? just remember, God loves u God bless. chris

  • @Loan--Wolf
    @Loan--Wolf 2 года назад +1

    i am terrified of getting my fingers that close tot he chuck

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад

      Don't do anything that you're uncomfortable with. I still get a bit nervous when I go to part something off really close to the chuck.

  • @trurex007lee7
    @trurex007lee7 2 года назад +1

    Great idea to use on small pieces of wood. Is the Huts wax more durable than the Acks or just as one step it is easier to apply?

  • @williamellis8993
    @williamellis8993 2 года назад

    Those are nice, Robert. What's in the left front box? Take care.
    Bill

  • @valeriehenschel1590
    @valeriehenschel1590 2 года назад

    Good way to use them up, but also inexpensively learn to turn boxes.

  • @richkeelan1312
    @richkeelan1312 2 года назад +1

    Awesome beginners projectreally like the boxes that were made how much are they?Well Done Hodge

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад

      I'd typically sell them for around $15ish unless it's some really exotic wood.

  • @emgiwoodworks
    @emgiwoodworks 2 года назад

    The piece sure looks good. What would be the price?
    My experience with selling things is that the environment determines what you can ask for something.
    Also: It will never be worth your time in real money, unless the environment is right.

  • @EricRush
    @EricRush 2 года назад +2

    Can't stand the Muzak and watch on Mute with CC. Otherwise, excellent. Subscribing.

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад

      Thanks for the feedback Eric. Do you not like the particular music selection or just prefer hearing lathe/cutting noises?

    • @EricRush
      @EricRush 2 года назад +2

      @@HodgePodgeWoodWorks I'd rather hear the process. I'm in the minority, but, for me, music nearly always is a distraction, especially that which sounds like I'm on telephone Hold.

    • @HodgePodgeWoodWorks
      @HodgePodgeWoodWorks  2 года назад +1

      @@EricRush If you haven't watched The Wood Whirler I believe he never used music. ruclips.net/user/TheWoodWhirler

    • @EricRush
      @EricRush 2 года назад

      @@HodgePodgeWoodWorks Neither does Harry Smith ruclips.net/channel/UCbg6VYW8kNJS0TOl8l6tz8Q