Regarding the new regulations there can be never a gatevalve or any valve between the PRV and the geyser. You wil have watermeter, non return valve, gatevalve, PRV and the geyser
Good Morning Sir I really enjoyed your video. You spoke slowly , I was able to understand every word, feel confident to install or fix a geyser. Thank you for sharing video, I Pray GOD helps you get more than 200 000 views. I honestly believe that this video will help a lot of people to understand how to fix or install a pressure geyser.
After watching this video i can definitely tell my uncle knew nothing about installing geysers. going to my grandmother's house to rectify his mistakes before the house gets flooded. This is a very informative video indeed.
The stopcock needs to be fitted before the prv to allow servicing of the prv and the rest of the geyser without shutting off the mains. Also, your stopcock is back to front. Your vacuum breakers also need to be 300mm above the geyser and your pipes need to be lagged
Meneer I give both up and down.The up giving general idea about geyser installations,the thumbs down is the order your installations.The stopcock after the pressure relief valve and the distance of vacuum breakers from top of heater must be 300mm.Its a good start,you'll improve if you do more research.
Potential bomb !! Should be Stopcock, then Pressure valve, then balance tee for cold water. Stopcock can function as a non return valve stopping your pressure relief from functioning. If you have a safety valve failure, your pressure valve (secondary safety pressure relief ) will not function then KABOOM you've just destroyed the house and maybe killed somebody.
The geyser installation is Non compliant, There may not be any shut-off valve between the geyser and pressure relief valve. and the vacuyum breakers must be 300mm above the geyser..
I'm no plumber but the pressure RELIEF valve was located on the side near the outlet pipe and there isn't a stop valve in place. This is the valve that makes sure the geyser does not build up excess press and explode. The stop valve was actually located on the geyser inlet pipe and it doesn't matter if before or after, in this case, it is after the pressure REGULATOR and if inadvertently shut off, the geyser will receive no water pressure in the first place to cause an overpressure scenario. The benefit of locating the valve before the inlet regulator is that you can change the regulator which tends to fail often without isolating the main water supply to the home since it has its own stop valve. (Just my opinion that I think makes sense)
Thanks for the video. Very helpful. Please can you tell me if it is okay to install a geyser with the tank directly against a wall (i.e. touching the wall)? Or do you need to have a gap between the wall and the geyser’s tank? Why I’m asking is because I’m wondering if the cold wall touching the geyser tank would cause the geyser to cool down quicker. Thanks so much. Jacques. South Africa 👌👍
The picture made me want to read the comments. Its a good illustration, but not entirely to how it should be. Take note, there is a gaurentee on the product, if it fails during that period , and not installed correctly, the replacement is a void.
Hi guys I have a vacuumed breaker that keeps steaming and the drip tray is always filled with water constantly Any ideas on how to fix or what is wrong
Cant fault your efforts and enthusiasm but you should remove this video as it is so wrong in many ways. First thing it will do is void your five year warrantee if the geyser is new.
I ddnt know that when mounting up straight the hot water supply and TP valve s"swap places" wow thanks. To comply with SANS dont forget to put your legging on the pipes
Vacuum breaker on the the hot water outlet must not be directly above. It must be piped 200mm minimum away and 300mm height. I'm an ex Service Technician from Kwikot and your installation does not comply with SANS REGULATION 10254. Stop misleading others. You can be prosecuted by posting a non compliant Geyser Installation on a public platform!
I dont know which edition of SANA 10254 you refer because the 2017 ed 4 makes no mention of 200mm away requirement, but it does say it must be as close as possible to the tank.
Gee Stacy -- Been checking the net -- Surprised to see you haven't posted an alternative way of installing a geyser ? I wonder why ? But I think i know ...Its because you are patently a millennial ....................... (Fill in the gap lol) '
@@tikkykopmostert5972 ignore the negative people. I appreciate this video. I Bought a house a couple of months ago. You video identified a mistake a professional plumber made in my house. Causing me to fix bursed pipes 3 o'clock in the morning.
Good day, Very well presented. Professionals installed my 150L geyser but only cold water come through even if the EPS shows 55 degrees. Now these people are nowhere. Where is the hot water then. I am so frustrated. Thanks
Regarding the new regulations there can be never a gatevalve or any valve between the PRV and the geyser. You wil have watermeter, non return valve, gatevalve, PRV and the geyser
Good Morning Sir
I really enjoyed your video. You spoke slowly , I was able to understand every word, feel confident to install or fix a geyser. Thank you for sharing video, I Pray GOD helps you get more than 200 000 views. I honestly believe that this video will help a lot of people to understand how to fix or install a pressure geyser.
After watching this video i can definitely tell my uncle knew nothing about installing geysers. going to my grandmother's house to rectify his mistakes before the house gets flooded. This is a very informative video indeed.
Very cool - going to install my geyser in a few days - you've helped me a million times over :) thank you
Thank you very much. This was very informative.
Thank you, your video was a very informative and great help. Looking forward to your future videos.
The stopcock needs to be fitted before the prv to allow servicing of the prv and the rest of the geyser without shutting off the mains. Also, your stopcock is back to front. Your vacuum breakers also need to be 300mm above the geyser and your pipes need to be lagged
yea, also that hot water vacuum breaker needs to be 200mm away from the outlet and then up 300mm.
Wow thanx this video really helped me. I understand everything a little better now
Quite informative, thank you Sir.
Well explained, thank you so much
THANKS bro. very informative.
Meneer I give both up and down.The up giving general idea about geyser installations,the thumbs down is the order your installations.The stopcock after the pressure relief valve and the distance of vacuum breakers from top of heater must be 300mm.Its a good start,you'll improve if you do more research.
Thank you Sir
Well put together 👌😎
"If you close this, you won't have a house the next day"
thanks so much for the info it really helped me alot
Thanks so very much for guideline.
Very helpful thanks
Potential bomb !! Should be Stopcock, then Pressure valve, then balance tee for cold water. Stopcock can function as a non return valve stopping your pressure relief from functioning. If you have a safety valve failure, your pressure valve (secondary safety pressure relief ) will not function then KABOOM you've just destroyed the house and maybe killed somebody.
Thank you gr8 video
The geyser installation is Non compliant, There may not be any shut-off valve between the geyser and pressure relief valve. and the vacuyum breakers must be 300mm above the geyser..
I'm no plumber but the pressure RELIEF valve was located on the side near the outlet pipe and there isn't a stop valve in place. This is the valve that makes sure the geyser does not build up excess press and explode. The stop valve was actually located on the geyser inlet pipe and it doesn't matter if before or after, in this case, it is after the pressure REGULATOR and if inadvertently shut off, the geyser will receive no water pressure in the first place to cause an overpressure scenario. The benefit of locating the valve before the inlet regulator is that you can change the regulator which tends to fail often without isolating the main water supply to the home since it has its own stop valve.
(Just my opinion that I think makes sense)
Nice vid bru keep making more ignore the haters
Great informative video. Could you position a geyser on the ground or does it always have to be on the wall or in the roof
Yes you can position in on the ground.
your vacuum breaker is supposed to 300mm high
I like this guy....he is so cool and cute🥰🥰🥰
Good evening, from where on the geyser can I use 15mm copper pipe pls
Thanks man to help me with this
Nice
Thanks for the video.
Very helpful.
Please can you tell me if it is okay to install a geyser with the tank directly against a wall (i.e. touching the wall)? Or do you need to have a gap between the wall and the geyser’s tank?
Why I’m asking is because I’m wondering if the cold wall touching the geyser tank would cause the geyser to cool down quicker.
Thanks so much.
Jacques.
South Africa 👌👍
you can mount it directly to the wall, it needs to be a strong wall not a single brick and only geysers 150L and less and the pipes need insulation
The picture made me want to read the comments. Its a good illustration, but not entirely to how it should be. Take note, there is a gaurentee on the product, if it fails during that period , and not installed correctly, the replacement is a void.
Thanks teacher
Can I move the Geyser wall mountings on a KWIKOT 200L heyser( to the other mountinhg bolts on the geyser?
yes you can if you hang it on a wall you must have supporting brackets underneath it on the wall
Thanks ❤❤❤❤❤❤
Can I install the PRV lets say 5 meters from the geyser, or must it be close to the geyser?
With the new law the PRV has to be installed after the metre to balance the pressure for your house
Does the Pressure Control valve always have to be horizontal?
no you can put it vertical
Dude your geyser installation does not comply with SANS 10254...
Hi guys I have a vacuumed breaker that keeps steaming and the drip tray is always filled with water constantly
Any ideas on how to fix or what is wrong
Cant fault your efforts and enthusiasm but you should remove this video as it is so wrong in many ways. First thing it will do is void your five year warrantee if the geyser is new.
Mag jy soldeer op di geyser pype ??
I ddnt know that when mounting up straight the hot water supply and TP valve s"swap places" wow thanks. To comply with SANS dont forget to put your legging on the pipes
Thank you helpful enough
You can not put the hot wter outlet vaccume breakers straight from the male you have to atleast put a bend then tee
Vacuum breaker on the the hot water outlet must not be directly above. It must be piped 200mm minimum away and 300mm height. I'm an ex Service Technician from Kwikot and your installation does not comply with SANS REGULATION 10254. Stop misleading others. You can be prosecuted by posting a non compliant Geyser Installation on a public platform!
Where can one get the proper regulation and how to ensure that your Geyser is installed correctly?
I dont know which edition of SANA 10254 you refer because the 2017 ed 4 makes no mention of 200mm away requirement, but it does say it must be as close as possible to the tank.
@@Mukesh-rq7ol Take a look at new SANS REGULATION in the SABS brochure.
Hi Bro Can I Have Your Contact Details I'm Having Challenge With My Kwikot Pressure Valve
New regulations state that all the fittings have to be connex me thinks
Hell brother don’t leave your day job
Not allowed to have a Valve or extention after the Presure controll Valve
does Franke approve you as an acredited installer
What course the Electrical shocking when showering
Please fire the guy who's writing the subtitles for you
Safety valve overflows when the thermostat is faulty not because the is pressure in the tank(it only release s on the PRV)
Thats incorrect. Its a TP valve. Temperature and pressure
Are you a registered plumber? There are new regulations that you need to be up to date with,before you miss inform people.
Yeah i don't think he mentioned that PRV has to have 2x 45bends on the overflow pipe and the whole setup is just not right
The reason geyser burst shut of valve after prv
You cannot install a stopcock or any other valve between the PRV and the geyser,you will lose your warranty..!!
That installation is NOT correct. You are giving incorrect information to your viewers.
weet jou ma dat jy dit doen.Dit lyk of jy nog skool behoort.
How not to install a geyser lol
Why dont you put a stop end on the tp. Scary. As a pirb plumber I am concerned for this bakkie plumber who are lieing to the public. He must be stop.
Hello.yes I agree .the job must be done according to sabs 0254 standards.this man is fooling you.
you shouldn't make videos about thing you know nothing about...
ok
Stacy, can you do better?
Gee Stacy -- Been checking the net -- Surprised to see you haven't posted an alternative way of installing a geyser ? I wonder why ? But I think i know ...Its because you are patently a millennial ....................... (Fill in the gap lol)
'
@@tikkykopmostert5972 ignore the negative people. I appreciate this video. I Bought a house a couple of months ago. You video identified a mistake a professional plumber made in my house. Causing me to fix bursed pipes 3 o'clock in the morning.
Good day,
Very well presented. Professionals installed my 150L geyser but only cold water come through even if the EPS shows 55 degrees. Now these people are nowhere. Where is the hot water then. I am so frustrated.
Thanks
Nice