Bath mixer installation
HTML-код
- Опубликовано: 8 апр 2017
- Bath mixer installation. A few tricks and tips to make your installation a whole lot easier. See how to connect the fittings to the sink water lines using PEX water lines and PEX fittings. This is the BEST plumbing solution for beginner DIY plumbers! It's so simple to install new water lines to your sink or "double sinks". In this bathroom training video you will learn how to use PEX water lines and fittings to quickly and easily plumb your new bathroom sink! Bathroom Plumbing is SIMPLE to do if you have the right instructions to follow. Watch this diy bathroom plumbing video and learn a few Pro secrets for getting your sink water lines installed right the first time. How to install a drain system and explains different ways to configure it for your own situation.
- Хобби
Being one who records whilst they work and edits in the twilight hours. I know the difficulties and how much effort goes into making these videos. Material like this is undervalued. Education has changed so much with RUclips. Society are gaining the equivalent of a RUclips plumbing degree. It's good when it's used for something positive like making individuals better engineers. Onsite experience is vital as well as real qualifications. Yet this media stream and experience passed on is helping nations strive to better engineering standards. It would have been a game changer if I had some of these videos when I initially qualified as a plumber 13 years ago. There was hardly anything like this to watch. It's great that the information is there for those that are thirsty to grow in their knowledge of the trade.
ruclips.net/video/wXXGTgS8DL8/видео.html
P
@@anggiattimbulbutarbutar3217 ، ,,u¿
It's recommend to check the water leek before pit silicone
I like it , looks so easy and quick, thanks for your show
Where do I get it,????????????
Excellent and simple video.. Thanks
Thanks 🙏. interesting video
Mohammed from Iraq 🇮🇶
Mohammed ali nice
꧁ঔৣ☬✞𝓓𝖔𝖓✞☬ঔৣ꧂
That's a good job sir. I'm a plumber too from Cameroon. I'm a female plumber.
Good job am a plumber from Kenya
شكرا استاذي الفاضل على المجهودات والمعلومات وطريقة السهلة لتركيب ميلانجور دوش شكرا جزيلا.
Thanks. Very helpful.
Excellent video and no annoying commentary. Well done!
thank you very much
Работа говно. Нельзя резьбу внутри оставлять , когда побежит вода и не узнаешь.
ruclips.net/video/xcwqdHohEE0/видео.html
Is it easy to change where the water opens It's on the wall, and I want it with the sink in my kitchen???
Thank you.
Excellent video 👍
Thanks. ... it helped a lot✌...that wasn't very difficult ... now doing the installation on my own. .. rather than waiting for my lazy brother doing it☺
por que le echan teflon al hilo,si esa llave lleba un orring...yo como plomero no le echo teflon..
Good
Nice man,keep it up
Good job i am a plumbing from Mauritius, and bricolage wood metal cement electric
Fee
Démonstration clear and clean?! Bravo?!
Getting the rough in to be perfect is the key here. Good job
Id wrap some tape around the pliers before tightening the mixer, wont the metal pliers scratch the chrome?
terrazzowork
normally if you set your pliers to fit the mixer properly it would not scratch it at all, scratches happen when the plier is lose
You are correct. I like to use short pieces of clear vinyl tubing that fit nice over the jaws as a cushion. "Hot shots" will disagree.
@@michaelofordum7521 ccalagepomm pedinjection
Well super so nice of you
Excellent good job ✅👍👍👍👍
Rj
London Uk 🇬🇧
يعطيك الصحة حبيبنا
Buen trabajo y buen video. Es importante aclarar que el secreto reside en hacer una correcta instalación -nivelación, profundidad, etc.- de las tomas de las tuberías de agua fría y caliente. Caso contrario, se dificulta mucho este trabajo final. Felicitaciones!!
Pero no habla ni dise las medidas que deben tener las piezas de separación
So perfect and very professional way. But sad part is todays world there are very few plumbers like you who work very honestly and precisely.
Can you please explain what you have screwed into the pipe prior to screwing in the off centre adapters, and also what you have in the wall to begin with from the first fit?
Great work
Nice
Excellent video !!!.
Important details:
With the traditional cannula on the cam there is no likelihood of teflon turning the cam at the moment when the two battery connectors are screwed into the cams.
The German wrench (13 or 14 & 30mm) in the bending of the cams and the battery connectors on the cams is the most suitable tool for throttling.
perfect feeting with mixer tap. good
Thank you. In reality I had an old house where the 2 end pipes weren't at standard distance, even with the Z fitting supplied with Hansgrohe tap, I had to buy a pair with longer arms (that also conventiently have a shutoff valve in them). Then the 2 end pipes didn't end extend to the same distance in the tiles (old Z fittings were different from one another), so I had to get a lengthener adapter which I had to cut to size with an angle grinder. It's of different metal than the rest so the connection started to rust. When trying to place the tap, only 1 end connected at the same time, because the other end wasn't on the same axis (not parallel in any way) even if the distance was correct. With some teflon string I managed to hook into it and now it seems all good. It took 4 months (99% of that is procrastination while we only showered with hot water as the tap wasn't connected to cold, thankfully hot water temp was adjustable). What a journey xD
قبل ان تضع السيلكون يحب عليك مراقبة ماركبت لتتأكد من الماء هل يخرج من بين المنشون وألا s والكود
Hi
Nice video, which tool you used to fix the hex nipple?. Where I can buy this?
Hex nipple??
Wonderful job
hi everyone ,i saw many poepole ask about the name of the tools used in the video well its name in frensh is i hope so guys i helped you
الله يجزيك خير ويعطيك الصحة رحم الله من عمل عمل صالح فاتقنه
بل ادم
Hindware best ❤️🤗👍
A
A
Nicely done ✅
The real professional way of installation.
#MEPSolutionstornado
Very good
вууелб
+Enver Sulaver x
Yeah I agree with the comments, everyone's a critic. If you have a membrane then you shouldn't need silicone. Other than that showing exactly what you did at each step was perfectly executed. Thanks for the upload.
sir for more information click on thedesignbridge.in/products/bath-accessories
Saludos deDe oruro-bolivia.....
Did you buy the cone looking trim plates seperate ? I see you have a nice gap between them and the mixer... I do to and I dont know how to fix it. Looks awfull with caulking.... plus the fittings run around.... yours probably do to... how did you fix this? Or did you ?
I like it to this plumbing system bro I interested 👍
A very nice and educative show
boniface kagwa
Just out of curiosity what size are the big nuts on the mixer? Off course I understand that you can use an adjustable spanner.
32mm from most producers and slightly less from lower budget producers but either way your best choice even if you have 32mm wrench near by is to use adjustable wrench to prevent damaging the nut on the mixer by tightening the wrench on it every time you put it on
Bende bir sıhhi tesisat ustasıyım. Çok güzel bir montaj oldu. Biz eskiden silikon yerine derz dolgu malzemesi kullanırdık. Şimdiki imkanlar çok geniş.🇹🇷🇹🇷🇹🇷
Sorry few things wrong in this video, what about a leak test after the connection was made then filled with silicone which then makes a mess if their was a leak, also if ur gonna use silicone use it properly by smothing it off onto the tile which will guarantee water tight 👌
When you connect few thousand connections a month, you know when it will leak
No check likege no fixing the cup fast mixer fixing and chek ane likege and remove mixer fixing cup after fix mixer right
@@Pramodrubi vbb
1988rixy cu my
Myna Myna il
people on here saying dont use silicon , you use silicone to stop any water running down the back of the tiles and making them come off over time
Finally !!!! good comment. Thank you
Youse spelz reel gud mate. I recomed takin yo meds.
@@K-carbon
Nice, please our channel also for Plumbings, Electrical, and all types of Construction work.
Thanks a lot
Great video, solve my problem
Antes de colocar el grifo y poner silicona en el orificio se pone un tapón y se prueba .Si tiene tan solo una gota de pérdida o fuga está no se verá porque el azulejo y la silicona lo tapa y puede tener consecuencias de humedad y filtración al cabo de tiempo.
nice. ..how do you know there is no leaks between the tiles and wall?
nice pes
oke thank tehniknya semoga bermanfaat
Nice work!
At 5:14 how souare you are that the fitting is not leaking after installing sanitary silicone before you check!
Fair comment!
Dosto poll works plz.
When tightening the nuts on the mixer to the thread, how are you stopping it from over turning the whole thing?
The Rottie Pack dont overtight
@@sudheervelavoor lol yea got it sorted 3 months ago I asked this lol
@@therottiepack lol
Hi, what size of extension adaptor you use? Is it M22 to F1/2”?
Awesome job brother
What's that reducer adaptor called? And what size? I'm talking about the reducer that u use b4 putting on the s union
looks like a female iron adaptor, not sure about the exact name
it's probably not a reducer but an extender nipple usally 1/2-1/2 inch. The lenght is variable depending how far you need to come out from the drop ear elbow to be in line with the tiles. the smallest is 1cm and it goes up from there.
It's a socket nipple greeting from Uganda
1/2" extension nipple. Available in diifferent lenghts like 15mm, 20mm, 25mm.....
It is called filingo
What is that first brass fitting you installed called?
It is extender, has different length options.
C.P Nepal
@@diwanbhai7200 CP Nipple
Thanks for your expliquing
very good... thanks
Il faut d’abord tester l’étanchéité avant de mettre le silicone.
Thank you for sharing.
5555
Супер
شغل ممتاز ......... شكرا
good trick
Muchas gracias,muy buen video
Antes de poner todo hay que verificar si el agua sale,me imagino después se le haga una fuga 😂😂😂a sacar la silicona y todoo🙄
Pero aún cuando funcione todo, para qué poner la silicona?
Does any one know Which is the small fitting inserted in the Breech system before installing the angle adapter?
husain natalwala ni
شكرا على التعليم
Good work 👍
Hi, what is the name of that fitting you put in before inserting the s union connector? Can't find it anywhere.... Thx
Found it...its a radiator extension
Dear brother, It is called" Chrome" There are variety size of chrome, 10 ml, 15 ml, 20ml, 25ml....
@@SP-oc1mq km(/ankh u78
Bath mixer installation. A few tricks and tips to make your installation a whole lot easier. See how to connect the fittings to the sink water lines using PEX water lines and PEX fittings. This is the BEST plumbing solution for beginner DIY plumbers! It's so simple to install new water lines to your sink or "double sinks". In this bathroom training video you will learn how to use PEX water lines and fittings to quickly and easily plumb your new bathroom sink! Bathroom Plumbing is SIMPLE to do if you have the right instructions to follow. Watch this diy bathroom plumbing video and learn a few Pro secrets for getting your sink water lines installed right the first time. How to install a drain system and explains different ways to configure it for your own situation.
Heating system
What's the reducer adaptor size and what's it's called, the nut that you use the uni spanner on? I'm having trouble finding the reducer as the s union won't fit into my tap spindle hole. Any help will be appreciated. Thanks
Heating system bbn
Long Mamafly n
Long Mamafly e
Heating system.
?.
Ttttttttt
Tt
Qwe propeto felicidades amigo exelente travsjo
Must reply
Normal bathroom tap fitting me ye shower lga skte h kya
Ya fir iske alag se fitting hoge
Mtlb normal tap ko change kr ke ye wale tap lga de or sth me shower
Or only ek pipe fitting me mean only tank water
Super
Awesome video! At home, preparing in the restroom is an inevitable every day schedule. At work, a short restroom break is invigorating both for the body and psyche. This individual space is especially more pleasurable when at the spa or just when conditions take into account a long unwinding shower. In the event that you seeking after down any sort of assistance so you can propose this collusion address. (goo.gl/1zHBEN)
SHANTILAL MEGHWAL pxxxk
SHANTILAL MEGHWAL
Devitor koi kase fit karte hai
khabi ky nhi ho kya
شكرا عاشت ايدك اروح اجرب اشد الخلاط مالتي واشيل الحنفيات اللي جانت مربوطه والله يستر
Thanks for sharing 👍
لك عمي بلعباس استاذ
Versión en español
Thank you bro
Thanks verry helpful❤❤
Easy to fail these types of connections. I'm doing one soon for my shower not looking forward to it
👍
Wow awesome sir
very useful video
thanks
Seld
Everything is excelent except putting the silicone arround the hidden elbow because you might find Leaked or broken, then forced to loosen again
The silicon prevent s the water from entering to the broken tile around the mixer liner
Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm¿....mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm¿mmmmmm¿¡n¡¡ ¡ ¡¡nmm
No silicon
navas paluvally why not y are sihga
valalecopateapede
Très bien
عند قياس فرق المسافه كانت جهة اليمين ٤سم واليسار٣.٥سم ولم تعدل فلما لمتعد ل وشكرا
C'est le meilleur metié au monde c'est ma passion
You make video of body jet installation A-Z please
Better to do away with the offset irons, just go for a straight fixing kit, all compression on the outside of the tiled surface. As long as pipework is 150 mm apart you're good to go.
Good
Good friend
Very nice baht mixer fhting good pilamber. My job is pilambering
A very good job, but before the final closing, why didn't you do a test, is there a water leak or not?
No silicon
Silicon galat hai
Postavljanje tuš kade
instaliranje kade u kupatilu
أنا 18 عام اعمل عامل تجهزات صحية في تونس و أتمن ان اشتغل خارج البلاد وبالاخص فرنسا ان شأالله...
O
N♉♉🧀🧀♉🧀🧀♉♉♉♉⏱⏱⏱⏱⏱🧀🧀🧀😙😙😙😙😙😙😙🤑🐮🐮🐮🙊🙊💓💓💓💓✝✝✝✝🕎🕎♊♊♊♊♊♊♊♋♋♋♋♋♋♋☮☮☮☮☮🔯🔯🔯🔯🔯🔯🔯🇦🇺🇦🇹🚔🚔🚔🚔🚔🚔🚔🏒🏒🏒🏒🍑🍑🍑🐮🐮😙😙🤗😙😙😙😙😙😙🤗🤗🤗♊♊
Wow nice tutorial my friend and very informative content it's so very interesting video full support here my friend
What about if when you tighten in the eccentrics ready to recieve the bath spout they are not level? When I tighten my eccentrics in they are not level meaning the spout will be closer to the tile on one side then the other? At the moment I have to remove one of the chrome covers just to get it tight enough on one side!!! Please help 🙏
you should flush the lines for 5 minutes before instalation or at least remove the aerator and spray before open the water first times
The first smart comment, thank you very much :). If I filmed everything, video will be very long
Pipes Pipes .. thanks for your
+Heating system ओमपकाश
हेलो हेलो
teer my parents i
nabi lal
I really need some help right now.
What’s another option is the plumber didn’t measure the length of the of the pipe in the bathroom walls?
Excellent work 👍