How To Change CVT Transmission Fluid And Filters [Nissan Sentra/Juke/Versa 1.8L 2013-2019]
HTML-код
- Опубликовано: 2 май 2022
- 🚨Get High Quality LED Lights Here auxito.com/?ref=1134pqx6wb
🔴 Subscribe HERE ! ruclips.net/user/OneTrickTec...
💙 Donation Support The Channel www.paypal.com/donate?hosted_...
great video. what I don't understand is why every video I saw puts so much CVT oil and waste it draining out. $20 to $30 a quart and easily over by 1 quart is wasted every time. I'm going to put in what came out and top off after warm up until trickling fluid comes out from the stupid straw. Really stupid of all these car manufacturers.
Pro tip, always leave one bolt at the top and pry slowly, then the fluid drains at a controlled rate.
the second filter is on the Driver's side,not as he said passenger side,also drain the fluid before dropping the pan, first the 19mm bolt then the 5 mm hex tube under the 19mm bolt.
8 quarts!!! 🤣🤣 5 quarts and then let it drain and adjust. It will stop at 4.some quarts. The process would of been a lot faster with 5 quarts! 😉🤣🤣
Hows it going so far
8 quartz its too much. . It only takes 5 quarts
How many liters trasmission oil for nissan juke
Is that regular OBD ?
Didn't that pan have a stand pipe in it? Unless it is very low on fluid there is usually more in there you can get if you remove that next. On most cars that does not get all of the fluid out but it gets a lot more. That pipe is usually up in there and removable with an Allen key. For a transmission that has it, the drain plug has to be removed first to get to it. You will also easily spot it in the pan if it is there and not out.
LOL. Maybe you should learn how to take the pan off the right way! LOL
Good job!! We need more videos like this!
2019 sentra 22600 miles.
Good luck, great job. I'm from Iraq
Just a heads up if you are having a hard time removing the black cap on the fill tube you have the option of removing one 10mm bolt that holds the fill tube to the transmission. Get it out in the open and use a screwdriver for leverage to pop it off. Mine was really stuck on for some reason. Shout out to Nissan for making such a shitty design and no dipstick. F-ing ridiculous.
Great work, just wanted to see the part of measurement oil meter/wand/bendable to see the level before changing/replacement/or check out quality oil before making the change
Thanks!
Good job thanks a lot
I removed the large hex key plug below cartridge filter for a thorough drain. Ended up filling with 5 quarts and draining about half a quart residual at warm temp.
Presente cordial saludo desde Navoyork Sonora México excelente trabajo
Hi? Can this same cartridge filter be found in a nissan micra k13 2011 cvt?