Dude I have watched you since I was 8 and the fact that when I got here you had no likes or comments and no views other than me surprises me continue to be amazing.
Looks like a really good mold overall and I just LOVE that transformation (so cool and smart!) and the alt-mode. I also appreciate your jokes about evil science guy and super silver dude. I was even expecting you to call the other Brawn's alt-mode something like hyper future mobile toilet. Anyway, a very good review...as always. Because Balt is the best. You're my favorite. Bestmatrix!
Just got this one today and it's an awesome figure I'm trying to get all the original 1st season characters and brawn was a major one.Some of the joints are super tight, I thought I was gonna snap the hands off trying to break them free and fold them down the first time.
This was my final figure of 2023 and I'd say it's a good one to end on, it's really full of character! And I got it 50% off, so for once I don't mind how small he is for a deluxe :P
I hope they retool this into Outback in whatever the third & final part of Legacy is. Or then again, I may just hunt down the Titans Return Brawn to match up with the Power of the Primes Outback I already have. Unless there's some sorta preliminary art that shows Brawn gettin' hit somewhere else, I don't see how they can make a Dead Brawn, since it'd mean retooling the shoulder and a huge chunk of his back...which is probably where the transformation hinge is on the toy.
The front wheel has to tab to the insert with the yellow tab on the inside. So in fact it's two tabs to keep it secure and not loose. Hope this helps. Mines is nice and tight.
While I am not a fan of the character design, this looks like a really fine figure. My only question is: why did they do the chest panel in green plastic and then tinted it orange? Wouldn't it be easier to just mold it in orange plastic? It would prevent any issue of chipping especially when the plastic underneath is in a color that contrasts so much with the paint.
@@baltmatrix I probably don't know enough about the process but it seems like it would logically be cheaper to make it in different colors than just make one color and then paint it. Like make 2 runs: one with green and one with orange. Then you do an assembly line and take parts from each run.
@@davidm4566 We've seen this before. Apparently, it's cheaper to pain an entire piece a different color than to have an extra underused color. Doesn't make much sense to me either, but that's what I've understood.
@@baltmatrix Couldn't it also be that they wanted the colors to match with the underside of the green hood that is behind Brawn's head? One of the biggest complaints have been colors not matching in the past, and I can't see them being able to match a yellow-orange plastic and a yellow-orange paint very well.
actually spotted "dead" Ironhide and Prowl at my local target earlier today. Almost completely no Transformers toys on shelf but they had that 2 pack and a Toxitron. I passed on both and have been regretting it all day. Well not picking up Toxitron that is.
Dude I have watched you since I was 8 and the fact that when I got here you had no likes or comments and no views other than me surprises me continue to be amazing.
Thanks so much! The video has only been live for six minutes so that's probably why. :)
I remember having a G1 version, as a kid. This one is perfect!
I like that when you split apart the legs, they wind up looking like the original Brawn's legs. 😆
This is the Transformers of the year for me! I LOVE Brawn.
We need an awesome version of Gears now that they gave us Brawn. Also cant forget about Outback.
Looks like a really good mold overall and I just LOVE that transformation (so cool and smart!) and the alt-mode. I also appreciate your jokes about evil science guy and super silver dude. I was even expecting you to call the other Brawn's alt-mode something like hyper future mobile toilet. Anyway, a very good review...as always. Because Balt is the best. You're my favorite. Bestmatrix!
The gun fitting in the spare wheel is a nod to the G1 figure.
2:52 Guile's proud noises in the background (meanwhile Goro's flashbacks INTENSIFIES).
Nice looking Brawn in robot and combat jeep mode!
I think it’s an incredible figure. I’m pleased with it.
Once Toyhax makes their decals with cool-looking window colors I think this figure will really shine.
Just got this one today and it's an awesome figure I'm trying to get all the original 1st season characters and brawn was a major one.Some of the joints are super tight, I thought I was gonna snap the hands off trying to break them free and fold them down the first time.
There is something wrong with the audio, your voice seem to "fuzzy" in certain scenes, but not in others.
I have TR Outback & Brawn.
Can they make a Jipe homage? Pretty please?
i love your channel and watched you since your armada transformers
I'm hoping they make Outback/Fallback out of this guy.
Great range of comparisons. Really appreciate it.
I scored a Titanium series war within Ultra Magnus. And I saw dead Ironhide and prowl pack at Target in Dallas 2 days ago
Ooh, right in the nose cone.😆
I've seen his rocket pals 2 packs but no Brawns yet at all my local targets. Happy to see its still a figure worth getting.
This was my final figure of 2023 and I'd say it's a good one to end on, it's really full of character! And I got it 50% off, so for once I don't mind how small he is for a deluxe :P
Saw the dead duo in a Target a week and change ago. Yup.
Audio quality a little funky a few times.
Great review as always, man. I'm sooooo looking forward to your SS Rhinox review. I have him and I really love that fig.
I hope they retool this into Outback in whatever the third & final part of Legacy is. Or then again, I may just hunt down the Titans Return Brawn to match up with the Power of the Primes Outback I already have.
Unless there's some sorta preliminary art that shows Brawn gettin' hit somewhere else, I don't see how they can make a Dead Brawn, since it'd mean retooling the shoulder and a huge chunk of his back...which is probably where the transformation hinge is on the toy.
A figure in exactly the right colour is a nice surprise!
It really is!
@@baltmatrixI still enjoy my Earthrise Sunstreaker but they couldn't even nail one colour for that...😮
@@martinw8735i never rlly minded it tbh just wish he had the grey shins and shoulders
@@finlayyyyy My copy had better colour matching than some I think. Always wanted a Sunstreaker so just happy to get him!
@@martinw8735 mine too, there’s an 86 one coming next year apparently
Probably will be an upgrade kit to fill in that chest cavity. Since it's not used to store any of the robot kibble in vehicle mode.
Cant wait for SS86 Ratchet and i hope they will make a new prowl without the battle damage
Great review 😀
The front wheel has to tab to the insert with the yellow tab on the inside. So in fact it's two tabs to keep it secure and not loose. Hope this helps. Mines is nice and tight.
Bro the microphone is broken
mic got some noise
Battery needed replaced. Next video will sound better.
And by impeccable you mean _COMPLETELY PECCABLE!_
Question... Why store the gun on top during vehicle mode? You, in fact, mention that you can store the gun in the chest cavity...
I think you meant studio series deluxe class brawn, legacy is a different line
While I am not a fan of the character design, this looks like a really fine figure.
My only question is: why did they do the chest panel in green plastic and then tinted it orange? Wouldn't it be easier to just mold it in orange plastic? It would prevent any issue of chipping especially when the plastic underneath is in a color that contrasts so much with the paint.
My guess is due to budget. They have limited mold space with each figure, so they did it all in green and painted orange/yellow instead.
@@baltmatrix I probably don't know enough about the process but it seems like it would logically be cheaper to make it in different colors than just make one color and then paint it.
Like make 2 runs: one with green and one with orange. Then you do an assembly line and take parts from each run.
@@davidm4566 We've seen this before. Apparently, it's cheaper to pain an entire piece a different color than to have an extra underused color. Doesn't make much sense to me either, but that's what I've understood.
@@baltmatrix Couldn't it also be that they wanted the colors to match with the underside of the green hood that is behind Brawn's head? One of the biggest complaints have been colors not matching in the past, and I can't see them being able to match a yellow-orange plastic and a yellow-orange paint very well.
@@j.rileyindependentproductions Yes, I passed on Sunstreaker for this reason.
What you talking about almost perfect he's perfect cause remember he's a transformers toy meant to be play with by kids not collectible
Looks great, shame about the ball joints .😐
Otherwise, awesome review Balt 👍
makes me wonder if we get a legacy outback from this mold
It will likely happen, given that they are mould mates.
There is a buzzworthy 2 pack ss86 already revealed for next year and its obvious it will be dead brawn and ratchet
Dead Ironhide and Prowl are already out 🤦🏻♂️
For gun storage it will not fit inside the chest to the left or right side once the engine front piece has been swiveled up?
I tired that. It's just a bit to thick and to long to fit.
@@baltmatrix ok just a thought. Thanks and i appreciate your videos over the years.
When’s commander class armada prime and titan class nemesis video coming?
Soooooon.
It's a shame that the audio got all screwed up...
Battery needed replaced. Next video will sound better.
But this Brawn is from Studio Series!
Yup. Fixed the title.
Can you store the blaster in his chest in either mode?
actually spotted "dead" Ironhide and Prowl at my local target earlier today. Almost completely no Transformers toys on shelf but they had that 2 pack and a Toxitron. I passed on both and have been regretting it all day. Well not picking up Toxitron that is.
I smell DNA Design will come out with a drill to fit onto the front, I just know it. Lol
I like it!
with different colors, it could be used for Outback
Totally. I'd bet we'll get an Outback early next year.
Once we get SS86 Ratchet we will get a dead Brawn and Ratchet 2 Pack, I just know it.
Watching review while opening my own.
No Siege Ports.
Brawn don’t need that crap. He just gives the Cons Nickel Knuckle sandwiches.
no one cares
There are two on the heels and one on the back. That's it sadly.
Takara please give this guy a MP brawn for good sakes! This fig is great but we're almost there
Wait.... Wasn't Brawn a Decepticon in something?
Oh, I was thinking of Brawl from the first Bay-Verse movie!!! Heck, I can't keep track of the names.
I said 'Brawl' in a bunch of outtakes for this review.
@@baltmatrix
lol even experienced people mess up
BTW I am actually a former resident(resident alien) of Baltimore. Cheers from Japan.
Kinda want to see an upscaled version painted red because the head reminds me so much of the juggernaut
praying we get a listing for windcharger soon
1
That was not his murderer. That megatron is for lil kids