How to fix a 2008 Honda Accord Cylinder 2, 3 & Random Misfire by doing a Crank Position Re-Learn
HTML-код
- Опубликовано: 5 сен 2024
- In this video, I'm solving the cylinder 2, 3 & random misfire issue on a 2008 Honda Accord with a crank position re-learn. I'll show you the exact procedure I use to fix this problem, note you will need a higher end diagnostic tool like my Topdon Phoenix Elite.
If you're experiencing a cylinder 2, 3 or random misfire on your 2008 Honda Accord, then you need to watch this video! I'll show you how to fix the issue using a crank position re-learn, and how this procedure is usually a fix for many Honda Accord problems. Thanks for watching!
If you purchased the same Crank Sensor over and over again from the same store, try switching brands. Also have been told by a certified Honda Tech that the starter HAS to be a Honda factory starter.
#hondaaccord #crankposition #misfire #cylinder
I prefer Topdon Diagnostic Tools for my shop. More specifically their professional lineup called the Phoenix Elite. You can purchase it here: topdonusa.com/...
For Key and Key Fob programming. I use the Topdon T-Ninja 1000. You can purchase it here: topdonusa.com/...
If you like this content, Please like and Subscribe. You can subscribe Here: / @bentoaksgarage
Recommended Playlists: Latest Uploads - • Suzuki Hayabusa - What...
2001 Chevy S10 V8 build - • Review: Perfect Launch...
Short Videos - • Aint got no gas in it....
The Dogs - • Saying goodbye to our ...
Like our Facebook Page - / bentoaksgarage
Bent Oaks Garage
259 Muddy Fork Road
Jonesborough, TN 37659
vgotspeed@yahoo.com
423-220-0757
Thanks guys it worked i just did a crank sensor relearn the car is back to normal ..
A mechanic told me a needed a new engine youtube saved me from a wrong diagnosis
Cheers
my 2012 accord EX-L with a k24 had this exact same issue, misfire on cylinder 2 and 3. Both the Ignition coils and spark plugs were good and a all it took was a crank position relearn and now the car is running perfectly.
Worked perfect, Thank You
I had this problem before and it's was the starter . I watched a video before on you tube . He was correct . The is after market starter in 09 Honda send out weird electrical signals . So you might want to check if the starter is a non Honda starter .
This made me save alot of money my wife wanted to take it to the dealer or get rid of the honda but I knew it was something so simple thanks for the video very much helpful and hope people can save money by doing this instead of getting scammed
This video helped me fix my problem.. same codes, relearned the crank sensor and now it’s fine
I have the exact same problem in my Honda. What do you mean by "relearned the crank sensor"
Basically you have to reprogram the sensor, it’s done with a higher end computer if you do it yourself or the dealer can do it as well
The process is fairly simple with this scanner
What scanner is that?
Friend and I changed spark plugs, and coil packs, then Crank position sensor,, same codes same problem. Relearned crank position sensor that was the issue.
Cuál es el sensor de la manivela
A crank position sensor monitors the position or rotational speed of the crankshaft. This information is used by engine management systems to control the fuel injection or the ignition system timing and other engine parameters. This also need to be in sync with your camshaft position sensor, thus the crank relearn procedure, which puts the camshafts and crankshaft back in sync with each other. If they are not in sync, your engine can be really hard to start, show mis-fires, run rough, basically cause your car to run like crap!
Great video wat was the symptoms
It would have random misfires. Long cranking. Obd2 gave specific codes that all led back to crank cam not matching up.
Can u use any obd/computer to do the relearn or no ?
It has to be a higher end one. Not all have obd2 scanners can do relearn
@@BentOaksGarage any one u recommend ? Do u know how much a mechanic would charge just to do the relearn?
@@juniorgonzalez6399 My outlook is, If I'm just doing a relearn, I'm not charging a customer. At the same time, I do not charge to diagnose an issue either. But most shops out there will charge an hour of labor at "their" hourly rate. Even though this take less than 5 minutes to do it.
Hey, I’ve got an Innova 5610 scanner that is supposed to be able to do the relearn and I watched a video of a guy do it on a gm vehicle but I am unable to on my Honda, I updated the scanner and still can’t, what scanner do you use?
I use a Topdon Phoenix Elite
What type of topdan scanner is that want to order one
www.topdon.com/products/Phoenix-Elite Its the Phoenix Elite, cost $1700. I have purchased a few others before this one, but I find Topdon to be the best and easiest to work with. Thanks for watching. Cheers
Do you know which other scanners can perform the relearn, for example the can the Phoenix Lite, Xtool D8, or Launch X431 perform the relearn? Thanks!!
Honestly, I do not know for sure. But it's a rather common procedure that most should be able to do. I do not recommend Xtool products. I purchased a X8 and it didn't work on many of the vehicles I tried it on. I have a video of it not working
So, I would stay away from that brand.
Great video but I’ve had this issue for over a year now. I go to a mechanic I trust and he does the re learn and it fixes the problem and then it comes back about a month later I always go to him and have him do a re learn again and it just keep coming back after about a month. To fix this issue the real fix is to replace your valve cover gasket. Long story but trust me that will fix it. If anyone cares for my explanation let me know and I’ll explain. Great video though!
Was the leaking oil compromising the crankshaft position sensor on your car?
thanks for your comment, these are the symptoms on a 2009 honda accord, and exactly, the re-learn makes it work for a couple weeks and then problem comes back, we will try the valve cover gasket to stop oil leaking on the sensor!!
please let me know i have had this problem for year and a half
Why do you have to change the valve cover gasket ?
@@ar053x
Im having the same problem with at 2.4l 2009 accord swapped the spark plugs and coil packs had injectors changed still comes back has replacing the valve cover gasket and re learn solved your problem?
Where do you purchase the computer to perform the relearn?
In the description on any of my videos, there is a link to Topdon USA.
Tankyou ❤❤help me well
i did same thing and im still having same codes
i change injectors coils spark plugs and cfk sensor but still have same codes what else can it be any idea
Look up: Honda TSB 09-050
@@BentOaksGarage what about for an 06 2.4 accord