HOW TO RELEARN CRANKSHAFT POSITION SENSOR, CALIBRATE CAMSHAFT POSITION SENSOR
HTML-код
- Опубликовано: 9 май 2020
- HOW TO RELEARN CRANKSHAFT POSITION SENSOR, CALIBRATE CAMSHAFT POSITION SENSOR
In this video we will show you how to relearn crankshaft position sensor and camshaft position sensor, the procedure is also know as crankshaft camshaft position sensor calibration. Many new cars will require the relearn / calibrate the crankshaft and the camshaft position sensor if you replaced crankshaft position sensor, camshaft position sensor, timing components, timing chain, timing belt, or the timing chain / belt was removed for repairs. If your car does not run good and throws a code for crankshaft camshaft position sensor this could be the reason why. In this vide we demonstrated how it takes only a few minutes to relearn calibrate camshaft and crankshaft position sensor. The procedure may differ some depending on the vehicle make and model.
► Our Favorite Car Scanner: amzn.to/2JxKf0E
► Check out our Amazon Store for parts for your car and tools that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys. 
Авто/Мото
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
t
Need advance on my dodge dart 2.4 2015 keeps misfire change plugs n coil pack many times but keeps doing it
What scan tool are you using??
This is probably the reason why I'm getting codes for the sensor for the camshaft and crankshaft
Followed your video and it fixed my issue, Thank you.
Great job 👍👍👍👍👍
Thank you
Your videos are great. I just wish you speak a little slower. Most times I have to turn on the closed captions to understand what you are saying.
does a 2003 Nissan maxima GLE need a relearn when changing crankshaft position sensor
What diagnostic tool you are using computer
Any other scanner s you recommend
Hi can i do this to my MB GL450? I’m going to change my camshaft position sensor soon.
Hi I have a 2017 1.0 ecoboost Ford Focus , I am about to change my sensors as the o-rings are leaking , do I need to learn the new once ?
Good video
Why are there so many people saying he's talking too fast? Is everyone here an American. I'm from aus and I find it very easy to understand. What I don't understand is how to do this if the engine doesn't start.
I'm American and I think he's talking too slow. But older people here grew up around less immigrants so they listen too slowly. My parents do the same thing. I date a lot of foreign women. My parents can barely understand them and I want them to hurry up lol.
I didn't think he was til you said he was... Now I think he was..
On the dodge dart 1.4l limited turbo, I got dtc P0315 says no crank sensor learned, it's been replaced will this programming procedure fix my issues please any information would be appreciated this car gas been sitting for a year with alot if new parts on it, it's not running right still
Do I need to relearn the camshft position sensor on 2003 BMW 525i after replacing?
Hi, i have xtool D9 pro. Am i able to do crank relearn on 2004 lexus 330 with acan tool? Or can your scan tool do it? Can you give link if so? I did timjng belt but it's running slugish now, thinking it needs relearn. Thank you.
Will it work for 2004 acura tl using a Autel Maxicom MK808?
Can you show me where is located the transmission speed sensor on Hunday elantra 2014?
Please!
Hi i have got corsa d 1.2 petrol 2012 sometime while i drive for long time it goes in limp mode if i turn the engine off then start again all work fine again. I try to diagnose no dtc restore. Can you pls help what could be or any common problem with corsa
Do you need the J2834 to access these functions? I just purchased maxi pro but can't find special functions to calibrate cam sensor.
The "vivent iLink 400" is $156 brand new on ebay and a guy made a youtube video of him doing the crank shaft relearn procedure on his 5.3L chevy pickup and it worked great. It says it also does camshaft relearn and throttle body relearn procedure.
how do you do this if the car won't start
Would u have to do this on a 1998 chevy suburban 5.7? I replaced cam and gears with chain and distributer.
I don't think you have to
Maxi system model where to buy?
I replaced both of 'em on my 2004 Colorado and it idles a little rough. I see SPARKADV(degrees) in my scanner LIVE DATA jumping at times back and forth between -5 and +17. When this happens the engine shudders. When this parameter stays close to zero on the positive side, the truck idles fine. I read that there is a way to do a ' relearn ' procedure without an expensive scanner, it involves the following steps:
1. Turn off all of the accessories. With the Air temperature sensor and Coolant temperature within 5 degrees (Centigrade) of each other,
start the engine and let it idle in Park or Neutral for two minutes.
2. Accelerate the vehicle to 55 mph at part throttle. Cruise at 55 mph for 8- 10 minutes until the engine
reaches operating temperature.
3. Cruise at 55 mph for another 5-6 minutes.
4. Decelerate to 45 mph without using the brakes, and maintain 45 mph for 1 minute.
5. Perform 4 deceleration cycles, without using the brakes, of 25 seconds each where no specific speed is
necessary.
Returning to 45 mph for 15 seconds in between deceleration cycles.
6. Accelerate to 55 mph and cruise for 2 minutes.
7. Stop the vehicle and idle for 2 minutes with the brake applied and the transmission in Drive (automatic trans.) or Neutral (manual trans.)
with the clutch depressed.
good luck with it. It sounds rather confusing and difficult to perform. Will try tonight when traffic slows down.
Did it work for you?
hello, i changed the engine on chevy equinox 2011 and now i have 4 codes cam and crank sensors 2 for cams and 2 for crank car wont turn, cant delete the codes, the wiring for the sensors does have 5volts for all 3 conactors, is the ecu gone or something im missing?
How do i convert the crankshaft sensor on a k engine 6.0 chevy the year made 08 the crankshaft sensors on the front of the cover of the camshaft crank cover i'm putting a replacing my k engine right away i noticed they had no camshaft sensor placed to mount my wire harness to get camshaft timing and sensor to work because the new engine i'm putting in it 6.0 has a different setup and it's timing for the sensor speed is on the back of the engine under the intake to the rear of the motor how do i make the new engine function properly to the k sensor system speed sensor
Hay mate can you get cam shaft sensors that you don't need to relearn iv herd that you can thanks
Do 2007 rabbits need to have the cam sensor relearned
Boss, do bmw need to be reprogram?
I have a 2006 320i with error code 2a83 camshaft control input what is this code for do I need to replace cam sensors ??
Is 70c temp standard for all cars?
If a relearn has to be done and the car will not run long enough, how do you get engine up to temperature?
Welp. Ur sol lol
Hello where are u located?
Someone needs to buy me a nice scan tool like this
For your experience what is your more scan tool you use Autel or foxwell??
Autel. It's not as user friendly, a little slower but it blows my snap on scanner out the water functionally. Snap on just has a bunch of subscription based info which is awesome as well but expensive af
can i relearn crank sensor on 2014 535i xdrive with maxisys 906bt and also add key fob to same car with same scan tool? thanks
So does that scan tool work?
How safe is it to do the relearn? My car (2018 Chevy Tahoe) got reduce engine power with throttle body code, I remember I saw a code related to camshaft, but I don’t know why I cannot find it. Now, I just have replaced trans fluid and the car doesn’t shift smoothly (50k km/31k miles) it should be healthy cause I am taking care of it and never gets over heated. I’ve done throttle relearn after cleaning, and trans relearn, but I start to get suspicious of the crankshaft code that I saw. So, crankshaft relearn safe?
Please I hope to get a reply
I’m working on a Chevy Aveo
After the head gasket was replaced… the car is not starting
And the fault cog been given is
Crankshaft position variation relearn
How can I do that if the car is not starting
Where can I get the tool from? I have changed crankshaft sensor still not getting fire.
whats up buddy can you tell me how to get to ckp sensor relearn for an 09 jaguar xf on the maxisys ms906bt? i can not find it
How to price this scanner sir...
We have an odyssey that needs to be at 181ftlbs torque . The manual says to not use a torque wrench???? How would know its 181ftlbs if I dont use a torque wrench. I know it tightens itself some but how do I know I did it right???
I HAVE KIDS WHO NEED A RIDE TO SCHOOL IS ANYONE WILLING TO HELP
What if it's cold outside and the car won't start. So I'm replacing the crankshaft position sensor so it will start. Can I do this without this mechanism?
I dont have all that fancy code senser thing that the shops have. And why cant i get an answer to my questions.ineed help to get my truck running.
I replaced my crankshaft and camshaft sensors on my 2019 hyundai tucson without doing this. My car ran fine for a bit then one day it would not start. Could this be the reason it won't start??
Did you get it figured out?
Hey having problem with my dodge dart sxt 2.4 2015. It keeps misfire n coil pack becomes no good n melts spark plug replaced plugs n coil pack wht the hell is problem ?
After replaceing the camshaft position sensor and crankshaft position sensor and it won't start. What do I do now to get it running. 5:47
2005 GMC Canyon 3.5L i5, just replaced the ECM/ECU/PCM (computer) and found out P0315 will appear after doing that. It wants the relearn CKS procedure done as a result. However, I do not have a device to plug into the truck to select the option to start the calibration. Is there another way to do this without the scanning tool?
Ok so if I am to spend big money on the tool, I may as well take it to the repair shop!
I have a question, hope you guys can help me. My VW TDI Vento got demaged crankshaft sensor (check engine light showed) , I repleaced it, but I still having same problem, same symptons... It is always neccesary to relearn crankshaft sensor?
Did you ever figure this out?
?
Do you always need to do a relearn when swapping the sensors ?
Swapping? Or replace…???
Swapping refers to changing places, like swapping spark plugs.. you may be referring to replacing..
The answer will still be yes either way
@@speedlimit6869 I meant replacing sorry for the confusion
What if it doesn't start to warm it up
It is a 1998 Ford ranger 4.0 engine
2.4k the price on amazon...
Just replaced the crankshaft position sensor on my Jeep Compass. I don’t have this device. What do I need to do if anything?
🤠
Clean engine??? Not what I work on! But hey your special!
Every time he says guys take a shot
I understand everything you say I don't know what she is talking
So basically you’d have to buy that expensive scanner just to relearn?
Yup
No
@@apexvadeor3670 how without scanner?
Yea my engine wont start
Guys
what will happen if you dont re CALIBRATE
Car want crank. It's getting gas, got power but no fire.
Appreciate auto info, but maybe we get a guy with better English--and forget the "Guys". Ben
Need this but can't understand ! Help!!
No
Kinda a pain in the ass you need such a high end expensive scan tool just to change a little sensor which older pre 2002 when cars didn't need a relearn... At least these day you can buy el cheapo scan tools to do the relearn..
No body can afford that scanner $2,200
I’m sure the information that you gave it is super good. But as a woman I need you to go slower when you talk, because I don’t understand a word that is coming out of your mouth! Thank you so much
RUclips has speed control for all videos. Click on the GEAR
😅
😂
He isn't talking fast but he isn't producing the correct sounds for "h" and "r" that English requires.
Tweak much?
very very difficult to understand, too fast,
Naw fr. Like you didn’t explain nun
I'm calling BS
You need to stop with giving talking too much and get to the point. My question was can I do it manually?
Can you talk a little faster also can you talk in a language I can't understand worse than what you're talkin
I understand
Lol
Get a life
Wow.....
Can anyone guess the race of the guy who made this comment 😂