Bmw 5 series G30/G31 520 secret hidden menu and functions Tipps and Tricks geheim menü

Just a quick video running through how to access the Hidden Menu on the G30 5 Series, and showing each sub-menu.
Steps:
1 - Turn on the ignition, engine off
2 - Press the start/stop button 3 times in quick succession
3 - Hold the Trip Reset button on the bottom left of the gauge cluster for 10 seconds until the Hidden Menu appears on the right side of the display
4 - To navigate the menu a single press of the reset button moves down the list, holding the reset button enters/exits a sub-menu
5 - Within sub-menu's a single press of the reset button can start tests or alter values
6 - To exit the mode cycle the ignition
geheimmenü bmw g30/g31.
meniu secret ascuns bmw g30, g31, f10, f30.
BMW e46 hidden secret menu and functions tutorial explained temperature battery RPM speed:
• BMW e46 hidden secret ...

[@diyonlinegarage]

BMW e46 hidden secret menu and functions tutorial explained temperature battery RPM speed:
ruclips.net/video/8Ed1hf0pVGk/видео.html

[@nikosloizou2177]

Hello, sometimes on my BMW 520D, my screen goes off. Normally I get notifications and the next time when I start the car, my screen is off. any suggestions why this is happening ?

[@diyonlinegarage]

I don’t have any ideas!☹️

[@HIOP0]

Why did you not take the opportunity to change the language to English on the menus for this demo?.

[@diyonlinegarage]

🤷

[@dariuszwojtak8850]

That transmission unlock option is great. Good to know that. Thanks, hopefully Ill never use it :)

[@diyonlinegarage]

Yes!

[@Julian-hl8mk]

On the new G30 there is no trip reset button on the gauge panel so ???

[@diyonlinegarage]

It is there. But is like a button flat!

[@Julian-hl8mk]

@@diyonlinegarage I have a new G30 520d MHT, for the UK, there is no button on the cluster? Mine is the 2021 facelift and has v7 idrive

[@diyonlinegarage]

I don’t know how it is on facelift! I own vorfacelift

[@Leo-cc4ip]

@@Julian-hl8mk i have the same Problem. Theres just no Button there :(

[@diyonlinegarage]

At my car i have one😕

[@duongtran1027]

I did this and they showing me the warning oil change but i just change it few weeks ago lol

[@Vmax19]

CODE is the 5last numbers from your vin nr , exemple 5+6+1+7+9= 28 / 28 is the code for enter the main hidden features ;-)

[@diyonlinegarage]

yes! Thanks.

[@nohchi_k1ant]

One question. For what?

[@diyonlinegarage]

As example if your gear box will not be anymore functional you can unlock on neutral gear!

[@Hotblood-ls1hx]

Почему не на русском ?

[@diyonlinegarage]

Can you write in English or deutsch please?

[@layhervamp]

totally pointless!

[@diyonlinegarage]

Why?

[@PilsHunt0r]

@@diyonlinegarage Because the information in the video is wrong in some parts. And: You didn't show the hidden menu of the BMW.
"Rollenbetrieb" is for the use of the vehicle on a roller dynamometer (dyno - oder in deutsch: Rollenprüfstand). It has nothing to do with transmission or towing / pushing a vehicle. Thats why there is the message that the DTC/DSC will be switched off, when activating "Rollenbetrieb".
Without this setting it would otherwise be rather bad to use the car on a dynamometer.
Accordingly, it does not unlock the transmission, like you said in the video (it has nothing to do with that).
By the way: To switch the BMW to N in such a case, you do not need the running engine. It can be done with just the ignition on (just start ignition by pushing the start button without a foot on the padels and put the transmission mode to N - neutral).
And: You have only shown the "diagnostic menu". After pushing the start button 3 times, the BMW tells you "Diagnosemodus aktiv".. So it tells you that this is not the hidden menu :-) ... But you were close to the hidden menu:
The hidden menu is under the item "Entriegeln" (means "unlock" in english). Only here you can get to the real hidden menu at all. You have to enter the cross sum of the last 5 digits of the chassis number.
It can be found under "Ident" - you said you didn't know what it was for.. It is for example to get the cross sum for the Code :-) - so you simply sum up the last 5 digits under Ident and the result is your code which need to be entered under "Entriegeln").
You have also randomly clicked around in the code numbers (see 04:10 in your video), but apparently did not understand what "code" should be used for.
By the way: This has been standard in every BMW for ages (for example in the E9x, E6x, F3x models).. So you could also watch videos of other models to see how it works.
I hope that explains it.
Greetings.

[@trife_93]

Waste of time

[@diyonlinegarage]

Maybe for you! But for another maybe will be helpfully

[@Сергей-н4ь8о]

👍