Lelit MaraX Version 2 White in Mapple Wood (PL62X V2 E61 Heat Exchanger): Unboxing and Setting up
HTML-код
- Опубликовано: 30 сен 2024
- Lelit MaraX Version 2 White in Mapple Wood (PL62X V2 E61 Heat Exchanger): Unboxing and Setting up
*Correction:
In Mara X version 2, they swap the priority switches:
O for Brew Priority
I for Steam Priority
Great video as always and congrats on your new machine! Looks like we upgrade each thing at the same time you and me lol. Personally went for BDB but I was between that and the Mara X. Hope you enjoy it!
Thanks! BDB was also my option but looking for smaller footprint machine. I have a small kitchen 🙂
@@HomeBaristaCorner Mara X is definitely a great machine. I was able to try a few e61 machines before making my decision and I loved that the Mara was so silent compared to for example Profitec pro 400.
Nice upgrade over the barista pro, what made you pick the Mara?
Small footprint, so quiet, can pull a shot and steam at the same time (not a dual boiler). For me, this is the best E61 heat exchanger machine right now. The version 2 of Mara X.
@@HomeBaristaCorner that’s great choice, i have been following your journey as i have all the same equipment including the barista pro . I just purchased a few weeks ago the rocket appartimento for a deep discount so I went with it. Night and day difference be the barista pro.
@@desun75 i agree E61 machines are way better 👍
What a beauty! where did you get one?
Been checking out mara x, but cant let go yet my GCP😢
Check with your local Lelit official distributor. I'm sure they have the colored edition.
Panalo yan, iniisip ko pa kung ito o Profitec 400, gusto ko kasi ng preinfusion
Yes MaraX has auto pre-infusion but you can also install pressure profile/flow paddle control kit in any E61 machine. But MaraX filter baskets are all IMS already so no need to upgrade. Subscribe ka na lang kabayan, that's my next project. 🙂
Thank you very much ❤
Have this perfect machine! As for watter filter use 35 liter, dont use 70 big ones, cause stress to pump, and watter flow!
Thanks for the vid. Recently got a Mara, excited to start using it
Hi. Good set up! What burrs do you have in your df64?
SSP High Uniformity burrs
@@HomeBaristaCorner thank you. Have you also considered the cast burrs?
I'm kind of surprised the Mara X has a small footprint. I expected it might've been too big for my kitchen. I might choose this over the Ascaso Steel Uno, especially after knowing there's an authorised local distributor in my area. And I really don't need a dual boiler. But I'm reading mixed opinions about the Mara X's factory OPV setting. Did you have to adjust yours significantly?
The default is 10 bars but that doesn't mean it is 10 bars in the group head. Some tested it's 9 bars in the group head those who added pressure profile kit.
Nice sub 2k choice. I am statically on Lelite. On the other hand perfomancly on BDB.
I have a small kitchen and need a small footprint machine that can also pull a shot and steam at the same time. E61 heat exchanger machine is the answer. Lelit Mara X version 2 is the best on this category. This machine is so quiet. But for dual boiler type machine, I will pick the Bianca v3.
@@HomeBaristaCorner Bianca has two boilers but E61 as well, otherwise was my first option.
@@DaddyMakesCoffeedoes this mean you are against e61?
@@NoZenith Against?! It is preference buddy! Saturated group head has more thermo stability. Though each type has its own pros and cons.
Hello fellow pinoy. Been watching your videos for some time now. I am so torn between this and the ECM Mechanika Max since it comes with rotary pump instead.
Kamusta kabayan! My choice is specific to my needs. I need a small machine. Maybe yours is different. If you have enough kitchen space and budget, I will pick the Bianca v3. I suggest to try the machine if they have showroom. That's what I did with Mara X.
Hey! Great video :)
Arent you supposed to remove the foil under the removable drip tray? I am setting up my machine right now and cant decide wheter the foil should stay or go ...
I didn't remove it. I find that foil will protect it from water and rust.
Hi, I already bought a Lelit Marax, I am in love with it but I have a problem. I do a correct simple puck prep with a fine ground (I tried multiple settings with a eureka mignon oro sd) but I cant get the pressure of the machine high. It just extracts the coffee the whole time pretty fast and with 3 bars of pressure. I blind tested it and it gets just fine to 9 bars, which is what I am hoping for. Any suggestions?
@@salvasied please use freshly roasted beans like 1 to 3 weeks from roasting date. Grocery bought coffee beans/Starbucks will not work. Look for your local roaster.
@@HomeBaristaCorner yeah of course, thanks for the tip.
How have you found the temperature stability?
MaraX v2 has dual pid probes which is not available in other HX machines. If you set to Brew Priority Mode, brewing temperature should be stable and a switch for light, medium and dark roast beans. Just properly warm up the machine for 24mins.
Bro where did you get your mara x?
I'm based in Singapore. Lelit has authorized distributor for each country. You can check here.
lelit.com/lelit-worldwide/#
Hi, you said 0 is for brew priority mode in the other video you made. In this one, you said the opposite. Which is right?
You can check the video description about my correction about this video. We can't edit videos. Thank you for watching!
Here you go:
*Correction:
In Mara X version 2, they swap the priority switches:
O for Brew Priority
I for Steam Priority
@@HomeBaristaCornerall good, thanks for explaining :)