Live stream was great i caught a good amount of it. I started laughing when the donations reached well over $500 and i could see how uncomfortable you were getting. You are a honest person and a darn good content creator. You are setting a good example for our youth.
You might say you're not an interior/ body repair guy, but the more you do it in these projects the better you can see your skill evolve. You're doing a great job, I'm itching to get back on my B2200 after watching you for the past few years
Watch the travaller build , he built that from a shell..? Every thing under it? his skill isn't evolving, he actually doing less full on builds, datsun king was big build to , 12 hour build on c10......This year he'll build more.. Full on builds..
5 minutes in Puddin and I'm already rolling. Thanks again for your humor I was having a very crappie day and you just fixed it. Thanks again God bless you and yours. By the way send Mortske the dortske a tire he had a flat today lol.
I remember when you were building the Datsun King you were giving the haters hell and made a smart response about building a C10. 2 years later and here you are, building this bad boy. This is probably my favorite paint job in your fleet.
Make sure you wire those dash speakers in sequence, instead of parallel, so you don't change the ohms to 2ohm instead of 4ohm. If you don't, it's hard on the stereo. Love the show! GMC is lookin gud
Very cool samurai you had too much coffee but I love it I love your channel you're cool just keep up the good work and I love the cars and the vehicles you fix
On your window crank to remove that pain in the ass clip, use a shop rag. Straighten the rag out and put it between the panel and hand crank, work the rag back and forth while pulling up on it and the clip comes out like magic!!!
You know PUDDIN, there is a plate that covers that hole, then you cut precisely the speaker holes and drill holes to attach and then secure the dash pad.... Insteadof it sounds like crap and vibrating the speakers loose.....
I'd love to see bills truck build on the channel. I'll bet it's nice and a great build .he seems very knowledgeable about engines ,please see if you can talk him into showing us what he's doing, I know for one I'd love to see it for sure
You lay down your carpet kit,or if you are like me the remnants from the carpet store and lay it down in the truck, take your scratch awl and heat up the end with the map gas torch lol, and stick them through the hole where the bolts go through and carefully cut through where the hot scratch awl pokes through the carpet and put the bolt in the hole pushing the hot scratch awl out of the carpet and that way you don't get odd shaped holes and frayed yarn strings in your carpet install.and the 78-80 Cheyenne Silverado and Sierra classic and grande,door panels with the wood grain trim panels on the factory trucks that are not optioned with the pull handle there's a decorative chrome bar that bolted in the place of the pull handle on the door panel i have dealt with them because i had worked on a 79 Chevy k10 Cheyenne
You need to talk to your heat/AC guy and put a small vent from the vent on the wall into your storage room so it doesn't get so cold/hot depending on the season.
Puddin, I don't think that GMC looked THIS GOOD rolling off the lot the day it sold! As always, amazing work! Looking forward to seeing you finish this truck and what you have ahead! Thank you for everything you do bud! Have fun!
Puddin: next time a door handle gives ya hell-grab a rag. Wrap the edge of one side of the rag around 180 degrees of the handle base and tug back and forth. The rag will grab the clip and pop er’ off
That GMC might still have a little rust…but she’s living her best life. Short bed, patina, running well, and a beautiful new interior. Might even be better than when she left the factory. Nope, definitely better than when she left the factory. Have so enjoyed this build.
Just wanted to say thankyou for your videos I’m sitting in a hospital waiting room while my father is having a very serious surgery because he has a pacemaker your videos help my mind stay occupied I’ve cried a million tears in the last two days so from the bottom of my heart thanks for replacing the tears with a smile You’ll never know how important your videos are thanks From
If Puddin lived north of the Mason Dixon line he would never delete he floor vent. Mild heat from the bottom up is much better than getting your face baked.
The huge light was a great idea for the interior shots. Fantastic video. Others would have made this a month long series. Thanks for all your hard work.
After recently seeing your videos for the last couple weeks as I'm recovering from having a large tumor removed from my neck that was growing on my spinal cord I've really enjoyed watching multiple videos per day. Being a godly man is very nice to see. Taking good care of the Easter pup was awesome. And giving back to your buddy the Gangster motor car (GMC) was the shiznit. You're the first youtube channel I've ever subscribed to. Keep up the good work. And God bless.
Now THIS is the stuff that separates you from ALL the others and puts you on the map!!! Dang brother, such a sweet ride, it’s been quite a journey watching you breathe new life into this project. It’s gonna be hard to keep from smiling when taking this ride out putting miles on her. Great work and an awesome vision, thanks for sharing it and taking us along…✌🏼 👍🏼👍🏼 from this guy!
When you are ready for another episode of Puddin and you find out he is installing carpet in a short bed, the very thing you did on your classic short bed the day before. Black from ACC as well, still worth the watch.
Pro tip: Those crank window clips are easy AF to get off with an ordinary shop rag. Hold the rag taut and shimmy it in behind the window crank. Hook the cloth on one of the clips and saw the rag a bit and the clip will get caught on the rag and pop right off. 👍
TRUCK WINNER. @ paulgumper
2nd Place $500 @anthonysipes441
3rd Place $250 @martinlehman3985
PLEASE EMAIL ME AT puddins.fab.shop@gmail.com!!!!
Please don't email if you didn't win! Don't be THAT guy
Didn't win but came to say I appreciate everything about this no bs giveaway. Thanks for all the awsome content puddin!!
Damn I was hoping I won but congratulations to the winners
Congratulations guys!
Congrats to the winners! Hope they love what they got!
Live stream was great i caught a good amount of it. I started laughing when the donations reached well over $500 and i could see how uncomfortable you were getting. You are a honest person and a darn good content creator. You are setting a good example for our youth.
Remember everyone to smash that like button help puddin out
And comment. It helps the ole alligator rhythm
I always do
You have to actually like it !!!
I Will do it.
Man I always love when Slick and Bill drop by to help or visit. It’s great to have friends like them.
The Stanley bit. I'm dying 🤣
This truck is nicer than ANYTHING you can buy new. Anything.
From live video to this video woot twice in one day sweeeeet
Momma says Can’t have too much Puddin! (Waterboy voice)
You might say you're not an interior/ body repair guy, but the more you do it in these projects the better you can see your skill evolve. You're doing a great job, I'm itching to get back on my B2200 after watching you for the past few years
Watch the travaller build , he built that from a shell..? Every thing under it? his skill isn't evolving, he actually doing less full on builds, datsun king was big build to , 12 hour build on c10......This year he'll build more.. Full on builds..
I thought you was gonna tell ‘em
Sittin on ur ass won’t finish your project
Oh Rubert!! Do be a good man, and fetch me my bougie water! Another GOOD ONE, y'all!!
My man puddin just has a movie made every week for us and it’s FREE oh how I hope these make it into the Smithsonian for generations to come to enjoy
5 minutes in Puddin and I'm already rolling. Thanks again for your humor I was having a very crappie day and you just fixed it. Thanks again God bless you and yours. By the way send Mortske the dortske a tire he had a flat today lol.
I second that 👍
Can we all just acknowledge the fact that the Towrolla may be the most versatile vehicle in the entire fleet?
Hot dam, letttttttssssss gooooooo! Congratulations to the truck winner!!!! 🏆🏆🏆
That interior came out freaking amazing! Who ever gets this truck, is going to ride in luxury, that is for sure!
I remember when you were building the Datsun King you were giving the haters hell and made a smart response about building a C10. 2 years later and here you are, building this bad boy. This is probably my favorite paint job in your fleet.
Top Stitch with the railroader pinstripe overalls 😂 I love it
Thank you for the laughs and smile.
That Part !
By the way it was really great that you had Bill and slick fifty with you during the live feed. You're good man
Make sure you wire those dash speakers in sequence, instead of parallel, so you don't change the ohms to 2ohm instead of 4ohm. If you don't, it's hard on the stereo. Love the show! GMC is lookin gud
Make sure you're still Subscribed, the tube has been unsubbing people.. not sure why tho..?
Came looking for this.... hopefully he wires them in series
Man watching you do stuff like patch panels and big teardowns just gives me confidence more and more to do it myself one of the next projects
He said he wasn't gonna make that shop truck perfect proceeds to make it perfect. Love it and I'm here for it!!!
Was gunna say the same thing!
250k everyone yay! 🎉.. 500k next buddy.. 😊
Make sure you vacuum out the bottom of the doors and make sure that the drain holes are cleared out
Love what you do with everything you do son😊.
Thanks for the live stream!I didn’t win but I’m proud to contribute a few $$ to the channel and thanks for the great content.
The Toyrolla is calling...it wants its interior back to old glory!
A nice relaxing day of puddin. what more could you ask for.
The hard way but the best way to remove all the rat crap ,the square body is looking good. 👌
Not really a big patina fan since I'm 60 years old and we painted our builds. That saying this is one of the sweetest patina trucks ive ever seen.
Agree, patina is an excuse not to finish a build
That wood grain is killer.
Wow she's going to be brand new and beautiful on the inside when you're done. She looks great
It’s Monday 2-12-24 here looking for this weeks puddin fix 🎉
More Puddin the Better!!! Thanks for doing the live stream.
get me all wrked up over a auction build with a pudden stamp dangit
To get rid of smells.. use . Hydrogen peroxide, baking soda, and dawn dishsoap.
Very cool samurai you had too much coffee but I love it I love your channel you're cool just keep up the good work and I love the cars and the vehicles you fix
Now THIS is the kind of Puddin video we all love. Watched every minute without skipping. Great work Sir. Can't wait for more like this one.
CONGRATULATIONS to the three winners 🏆 👏 🫡🇺🇲
Live then this….😱😱😱
Congrats to the winner and the surprise of the 2nd and 3rd place thing. Was great but sad cuz I did t win!😂
On your window crank to remove that pain in the ass clip, use a shop rag. Straighten the rag out and put it between the panel and hand crank, work the rag back and forth while pulling up on it and the clip comes out like magic!!!
Congratulations to the winners and thank you for being such an amazing inspiration to many of us out here! Appreciate you brother!
Amen
@@2Broke2Quit🤡
Puddin’s got him a Mortske’s Minute
Thought the fart was going to have me dead then you hit me with the marching and Stanley cup 😂😂 still got 2 hrs to go!
You know PUDDIN, there is a plate that covers that hole, then you cut precisely the speaker holes and drill holes to attach and then secure the dash pad.... Insteadof it sounds like crap and vibrating the speakers loose.....
Can hardly wait to meet you at Lone Star round up! We watch your show religiously in our house...every Monday and Thursday.
I'd love to see bills truck build on the channel. I'll bet it's nice and a great build .he seems very knowledgeable about engines ,please see if you can talk him into showing us what he's doing, I know for one I'd love to see it for sure
Gotta agree with you. I bet it'll be well worth a look .
Quick tip for roller upper clips.. take a shop rag and slide it behind the roller upper.....then the clip will come right off.
I’m very thankful for Mr Mortske. He’s the one who turned me on to your channel. I’m so thankful he did.
You lay down your carpet kit,or if you are like me the remnants from the carpet store and lay it down in the truck, take your scratch awl and heat up the end with the map gas torch lol, and stick them through the hole where the bolts go through and carefully cut through where the hot scratch awl pokes through the carpet and put the bolt in the hole pushing the hot scratch awl out of the carpet and that way you don't get odd shaped holes and frayed yarn strings in your carpet install.and the 78-80 Cheyenne Silverado and Sierra classic and grande,door panels with the wood grain trim panels on the factory trucks that are not optioned with the pull handle there's a decorative chrome bar that bolted in the place of the pull handle on the door panel i have dealt with them because i had worked on a 79 Chevy k10 Cheyenne
Hot Damn It's Time For Another One 🤘
You need to talk to your heat/AC guy and put a small vent from the vent on the wall into your storage room so it doesn't get so cold/hot depending on the season.
You are going to give it to Bill. Good choice. He deserves it.
I never heard him say he was giving it to Bill. Did I miss it? Clear to the end of the vid he’s still saying it’ll be a surprise.
it is my guess.
@@emersonb5764
Puddin, I don't think that GMC looked THIS GOOD rolling off the lot the day it sold! As always, amazing work! Looking forward to seeing you finish this truck and what you have ahead! Thank you for everything you do bud! Have fun!
Puddin, you made an old cow into a WOW!
I love the interior colors on that truck! I’m not big on wood grain either but it works in that truck!
Puddin: next time a door handle gives ya hell-grab a rag.
Wrap the edge of one side of the rag around 180 degrees of the handle base and tug back and forth. The rag will grab the clip and pop er’ off
WOW...!!!!! man-o-man what a sweet truck it's turning out to be...!!!!
That GMC might still have a little rust…but she’s living her best life. Short bed, patina, running well, and a beautiful new interior. Might even be better than when she left the factory. Nope, definitely better than when she left the factory. Have so enjoyed this build.
Just wanted to say thankyou for your videos I’m sitting in a hospital waiting room while my father is having a very serious surgery because he has a pacemaker your videos help my mind stay occupied I’ve cried a million tears in the last two days so from the bottom of my heart thanks for replacing the tears with a smile You’ll never know how important your videos are thanks
From
1:45 Now I want to see a Puddin's Fab Shop ad for Land of Throne War Deluxe Army Tank game 🤣🤣🤣🤣
Hey Puddin', for Okie floor pan patches, head back out to tha junkyard and pull an assortment of old license plates! Yahoo, yippee!!
Puddin time 🎉🎉🎉🎉🎉🎉 for the second time today 🎉🎉🎉🎉🎉🎉🎉
From live to vid here we go again with the action
If Puddin lived north of the Mason Dixon line he would never delete he floor vent. Mild heat from the bottom up is much better than getting your face baked.
Not going to lie, that box looks gooood 8:10. I'm five years over you, so that's looking sweet!
I think it would be cool to bring the wood grain out side the truck and cover the white with wood grain wrap it would look cool
@1:58:36
Early Bird may get the worm, but at the trap, the second mouse gets the cheese!
Congratulations to all the winners!
Old square body is lookin real good. Hot damn that things nice
You absolutely need to put that picture of Slick into the Employee of the Month frame. Then a picture of Bill in his teen years.
You always make me smile after a rough day!!! Thanks Sir Pudan!!!
That truck looks better than anyone expected!
Awesome !
The huge light was a great idea for the interior shots. Fantastic video. Others would have made this a month long series. Thanks for all your hard work.
all I can say is beautiful interior
Puddin and Bob Ross are both proud Air Force veterans and paint artists. Slightly different methods though.
Just put a little black spray paint on the killmat. That interior looks so good with the black!
i never get tired of watching the Pot County l̶e̶g̶e̶n̶d̶ shenangan man xD , seeing this truck evolve has been a fun journey :)
Even at 78 I still enjoy the poke and play! Love your videos! Look forward to the next one!
After recently seeing your videos for the last couple weeks as I'm recovering from having a large tumor removed from my neck that was growing on my spinal cord I've really enjoyed watching multiple videos per day. Being a godly man is very nice to see. Taking good care of the Easter pup was awesome. And giving back to your buddy the Gangster motor car (GMC) was the shiznit. You're the first youtube channel I've ever subscribed to.
Keep up the good work. And God bless.
Ceracoat headlight restoration will make that gauge lens look like glass.
The inside of that cab looks nice! Definitely like the jokes and humor throughout the video!🤣
congrats to the winner ...hot dang here we go again !!!!!
I gotta say Puddin, you are one of the best!
I just love the way Puddin' never hits the waste basket. Makes me laugh every time.
This truck is turning out so sweet
Holmatro is the company that currently makes the rescue tools for most fire departments, otherwise known as the jaws of life.
Truck is looking good
Congrats to the winners 🎉
Slick out here doin it for Dale🤘🏾
Always look forward to Monday for the OG PFS.
Thanks for sharing with us.
The color and patina on the gmc looks great!
The aluminum nut things are called speed nuts. Perfect for this project.
What started out as another old square body has turned into a badass truck. I'm loving it! I'm not mad at having to have one more episode.
Oooo... the cliffhanger at the end there!
Now THIS is the stuff that separates you from ALL the others and puts you on the map!!! Dang brother, such a sweet ride, it’s been quite a journey watching you breathe new life into this project. It’s gonna be hard to keep from smiling when taking this ride out putting miles on her. Great work and an awesome vision, thanks for sharing it and taking us along…✌🏼
👍🏼👍🏼 from this guy!
When you are ready for another episode of Puddin and you find out he is installing carpet in a short bed, the very thing you did on your classic short bed the day before. Black from ACC as well, still worth the watch.
Me and my boys play a drinking game while watching Puddin. Every time he says "anyhow" bottoms up! Hot damn this one was a doozy!
Pro tip: Those crank window clips are easy AF to get off with an ordinary shop rag. Hold the rag taut and shimmy it in behind the window crank. Hook the cloth on one of the clips and saw the rag a bit and the clip will get caught on the rag and pop right off. 👍
Speed nuts are what the nuts are called that cut threads into the post on trim to hold them on.
You have made an awesome square body out of that old field truck! Thanks for working so hard to bring the world into your shop.