Great vid Troy! I personally love my Granite 4x4! Mine is the brushless 3s BLX version, that goolrc combo I think was just a little under powered for it really to do more than the brushed system did, in the stock 3s BLX system the Granite can easily get over 30mph on a 2s lipo, on a 3s it can get up to 60+, the stock 3s BLX system is a 3500kv motor and a 100a esc, so I'm thinking maybe with a higher amp esc like an 80a you will definitely be able to get over 30mph on 2s using that 3900kv motor. Might be worth checking out before doing your giveaway with it.
Yes! I believe you are 100% correct. This combo was a little disappointing. We have driven it more since, and I don't like this setup. I have a Hobbywing SC8 ESC that I will try in it.
Great stuff man I never used the gool RC before. The Senton I had I put the brushless set up in it. I put the hobby wing 3s in it and that thing ripped pretty good. Cant wait to see who gets the truck next lol. Thanks bud
Yes sir! I have had good luck with the GoolRC stuff before, but this one seems more like a dud. The boys and I have driven it some more since filming this, and we are just not really happy with the ESC. I have a Hobbywing SC8 laying around (4S capable!!!) that I am going to throw in it and see how it goes. Don't really want to give it away with this poor running.
I think this ESC might have an issue. I have had multiple GoolRC setups over the years without a problem, but this one is just not quite right. I have a Hobbywing SC8 that I could throw in it...
Thanks for this video. My boys each have the voltage. I was looking at this one for myself to run with them. So far the voltage has held up to their abuse. Hope this one can too! Just subscribed!! Liking your vids!
Awesome! Yes, this truck is very durable and does come highly recommended. You can basically take 2 paths with the Granite 4x4. 1 - get the Mega and then throw a brushless setup at it. 2 - get the BLX from the start. I would honestly suggest that you go with (2). The only real drawback is that I don't believe the BLX comes with a battery, while the Mega does. Still - with 3 trucks running, you would probably be upgrading to lipo batteries rather soon anyway.
Bro that car is a BLAST! I friend of mine has one and it’s amazing. It’s worth noting thought that the stock spur will not last under brushless power though.
I took a mega Typhon and did it up the biggest thing holding back your speed is that spur gear I believe it's got the same one in it is I had and it's a 91 tooth I kept doing all kinds of stuff to it and the speed was never really increasing until I changed it spur gear you change that spur gear even with the set-up you got right now it'll wake it right up
Yes sir for the most part it's the same stuff except for the slipper clutch assembly and spur gear the center bearing support on the drive shaft and the turnbuckles I believe that's it other than that I believe it's everything the same as the 3s oh yeah and also the aluminum motor mount plate
I've just fitted a brushless to ours, but without changing the pinion we've seen no speed change at all (used 2s on both motors). Running much cooler though! Our brushed motor cooked running about on grass. Got a 17T pinion coming on Monday so should see some more speed!
Hey rich what motor did you go with? I’m in the same boat toasted the first motor and am looking to go brushless but I’d like to keep the speed down as it’s for my 5 year old
Great video Troy thank you! I’m just getting into the RC hobby and waiting for my Arrma voltage to arrive. Seems like the 4WD Arrma Granite would be a lot more customizable then the voltage?
Yes - there are a lot more parts available for the 4WD than the voltage. Still, that is OK. I also have a voltage - and that thing is simply a bunch of fun. Check out my video on testing it with the stock motor, a 12T brushed motor, and then going brushless!
Great Video! I'm doing the exact same thing with the cheaper Granite. I have so much stuff laying around it makes sense to use some of it. There isn't a whole lot of difference in the 2 not to try to make it a blx with leftover parts.
Blx has metal gears also. Metal motor plate. Theres more to it then motor an esc. If u swap to brushless an run 3s u will destroy the plastic gears inside in days lol
Well, I know a year later, that truck is long gone, but I would've loved to see a follow up video with that ESC properly programmed with the high power setting. Thanks for the video.
The GoolRC never had enough power for the truck. I swapped the ESC for a Hobbywing, and it worked great. The truck was given away, and the new owner has been driving it without issue.
Got my son one for his birthday, should be excited when he sees it, also might use my 3650 3600kv arrma blx motor i got onhand with my blx from my senton
Yeah no shame as i know from experience but goolrc we all know is about the cheapest drop in brushless conversion out there,however your cogging is most likely due to esc if you upgrade only esc to something loke a hobbywing $60 worth every penny would be world of difference also 60a isnt gonna be what you want it will work but if for offroad use then no onroad yes with right gear but if going 60a least be a quality brand again dont ask how i know this but goolrc 3660 3300kv is what i got in stampede with hobbywing 120a esc and man its scary fast for a cheap brushless motor has lasted way longer than could of ever imagined,still going to this day have already bought other motors for experimental kv/voltage performance so far 3200kv is about as far reliable u can get higher kv only gets hotter quicker for little more power better to up battery and lower kv 😉
Did you try the stock 3s. Brushless with arrma wide kit and 4s backflips ? The 17mm hexes are on Etsy , not widened . No rubbing . She flies , literally 😂. It’s great for the ramp , insane . Lots of wheelies otherwise and back to rollovers with 1” taller tires but it’s not bad . It’s like the granite was before the wide kit . I ran it for 3 weeks and switched yesterday . It’s been wet so I’ll see when the time comes if I like the stock tires or lp s .
Got a vorteks boost, have added bigger shocks, upgraded arms cups wheel carriers and the 4x4 pack. Have a goolrc 3650 5200kv hoping that's not too much kv.
Great channel best on youtube my son and I find info really helpful and clear will you do more on the Arrma vorteks blx upgrades and maintenance etc in the future ? Hope so all the best from the uk
That's a kool truck can't wait for the giveaway kool video you guys really do Rock !!! I got a esc card that would be awesome to win with the brushless set up and the brushed !!!!!!
my friend gearing mesh if different from the mega and the blx i would definetly change the output shafts (mine broke 😅) by the same means spider gear housing as its different mesh than you put the biggest pinion you can on there and thats probably the most furable 1/10 scale basher you can have!
awesome vid as always I'm definitely gonna keep my fingers crossed for this giveaway id love to have a truck like that thanks for the always great content Troy
Dang I would've loved to win a Grinite boost I don't mind 2wd or even 4x4 but either way they seem pretty durable for the price they are witch is really good.
Great video, I am in process of researching and planning on upgrading the v3 to brushless as well. In the forums people have recommended this set up: Hobbywing EZRun MAX10 SCT Sensorless Brushless ESC/3660SL Motor Combo. Thoughts on it?
@@RoadsideRC Thank you so much! I'm new to the hobby and trying to learn. So you would recommend that combo setup for the Mega v3? Anything else would you recommend upgrading from your experience so far? I know the v3 is pretty much brushless ready...just trying to pick your brain on what else would you recommend to upgrade. Thanks again!
Yes. I believe that setup will work very well for you! Otherwise, save some money for parts. Going faster, you will hit things harder, so might break more control arms and things like that.
Great video, but I would have liked to see the brushed speed test with the 2s instead of the nimh. Would you recommend this as a good upgrade, or would you recommend a better setup, possibly a hobbywing product? Love your content.
I have usually had some pretty good luck with the GoolRC stuff, but it seems this 60A esc is just not quite up to the tasks this time. Instead, you would be happier in the long run with this combo: amzn.to/3bAKnLQ
@@RoadsideRC Although, I'm not sure those 48p gears would handle that power and at that point, better off going with the BLX, from the start, anyway, as that's geared properly for brushless power up to 3s. That cheap combo probably wouldn't handle 3s, either.
@@RoadsideRC Did you ever figure out what should be put in a Mega or did you get rid of it before you got it right? Would you recommend it as a place to start or would it be better to save up for something better?
The 3S BLX version really is the best place to start. Instead of going with this GoolRC setup, I would recommend a Hobbywing Max10SCT esc with a 3500-3800kv motor. Still, that costs more than the jump between Mega and BLX...so better to just get the BLX.
@@RoadsideRC awesome! another thing, depending on which surface you run on for the day, you may want to adjust the slipper and shock height to protect the drivetrain and improve speed and handling... looset clutch and higher shocks for loose surfaces like dirt and tighter clutch and lower shocks for asphalt, but im sure you know this already. have fun!
I used the 16 pinion change out and made sure that the pinion and drive shafts connection were at the same height, placed the cover on and checked the ability for a smooth spin and connection. No dice. It seems to rough in places as I spin the drive shaft connection. Also, I can’t seem to push the whole plastic motor case back in to place far enough to get the red piece to slide in. This is a very frustrating project.
I apologize, I am really not following what is going wrong here. When talking about the pinion change, you mention making sure the pinion and driveshaft are at the same height. I think that might be where you are going wrong, as I am not sure what you mean by height in this situation. Getting the whole housing seated properly is 100% critical. You have to get the input from the transmission back in there correctly, or else nothing will work and you will break other pieces. I'm happy to help if you can provide more info.
@@RoadsideRC nope not a problem. I want something that can compete with the JLB cheetah extreme and I’ve had a few people tell me the Arrma Granite brushless is the best deal that will compete. I’m pretty new to RC but as with everything I do I go all in. thanks for the quick response.
Def gotta go with brushless. Also, I have an older version of the senton mega, with the weaker diff gears in it. Do the new mega gears got the older models?
ive got the mega 4x4 brushed v3 to, so dont we have to change things further while converting besides esc and motor and pinion.? cause the box says its brushless ready
Hey Troy great video I have tge same truck and converted it to a spectrum 4000kv brushless motor and spectrum esc but it still just doesn't have much punch power to it I've got it set to the highest level but don't help do you know what I need to change to help my low end tourqe? Tia
Hey So I just found another deal at tower hobbies for a scratch & Dent box of the granite 4x4 brushed version for $179. No warranty though. Do you think it's worth it? I want to pick up another 1/10 scale (also have a rival mt10) so the throttle can be dialed back and the kids can play with it. Kind of thinking about going for the 1/10 outcast 4s instead, running on 3s@50% for the kids, 4s for me! You think too much car for a 6&7 year old? I definitely wouldn't even consider letting them drive my kraton 6s exb. I'm thinking the outcast might be manageable, but if not maybe this granite? What do you think? Not much experience with kids and RCs. Obviously outcast would be way more fun for me when their not using it 😂
@@RoadsideRC have you experienced many issues with the granite as far as dependability? People seem to complain about the slipper clutch, drive shafts popping out, etc. Just wondering your experience with it. Thanks!
did you have any overheating issues with the stock brushed motor and ESC? I've only done 2 battery runs on mine and it got very very hot both on the NiMH and Lipo battery packs.
Brushed motors do tend to get hot...and have short life spans. Double check the gearing mesh between the pinion and the spur. It might be a little tight, which causes it to work harder.
@@preacherpauldudley-do-righ1080 This is the Hobbywing setup I would recommend. The Max10SCT is a super-powerful ESC that can handle almost anything you throw at it. The 3200kv is a little lower than what comes with the stock BLX model, but would provide really good power. amzn.to/2Pez6Ig
The good news, even if you use the stock brushless setup, you can always limit the speed with the controller. I would suggest going with the stock brushless setup, or perhaps this one: amzn.to/3gb3vEI Or use this better ESC: amzn.to/3euHEra Paired with this motor: www.amazon.com/dp/B073DDT7NY/ref=cm_sw_r_as_gl_apa_gl_i_REPPVCT52BVG5VENACK1?linkCode=ml2&tag=roadsiderc-20
Yeah problem is I wasn’t trying to spend that much, just bought it last week for my 5 year old to get the hang of things and now I’m already having to upgrade to brushless, looks like I should’ve just bought the blx from the start and ran a smaller battery in it. So you wouldn’t reccomend any of the goolrc kits?
@@jmorrow8122 I do not recommend any of the GoolRC kits. I have used many of them over the years. Their ESCs always give up rather quickly. Their motors can be pretty good though! Why are you already upgrading to brushless?
@@RoadsideRC well the first motor burnt up in a few days so I went and got a titan which has been doing good but now the esc only lets it run for about 5 minutes then it goes into thermal protection for some reason
I have personally used a bunch of different ways to mount cameras on the trucks. I highly recommend it is a physical bolt-on mount. Adhesive is typically not strong enough.
@@RoadsideRC not motor, i meant the pinion. It's the same size as the oem, the teeth are just too big. It catches every other tooth on the motor (new to this and its my first RC)
Dude i got 2 goolrc esc's for a redcat tornado buggy and a mini e-revo. Coggs no matter what pinion/program card setting i use. 2s battery. Dumbo rx/rx. Any suggestions?
@@RoadsideRC I'm not sure what kv, no markings, , got both used. The tonado and mini erevo are both stock brushless redcat and valenion respectively. Esc is 120 amp. Kinda frustrsted, might go brushed with the redcat and forget the taxxas totally.
@@RoadsideRC dragg and short course, and I want a rig just to be fast just to be..lol...I wanna Race my Granite second generation and the typhon when I get it.
I bought a used blx100system 3200kv motor and then I bought a granite mega 4x4 tried it stock brushed before putting the blx100 in it and let me tell you 30mph out of the box 🖕know maybe 14mph and right out of the box it got so 🖕ing hot you smell the motor burning but on the positive note blx100system in it rocks it's fast but it's fun .I also modified a brushed.slash actually a.super mod FRANKENSLASH😎💪😜🤐💀☠️🤬🖕, MY DOING AND ON 2 & 3s.its A SPEED DEMON SO MUCH DIFFERENCE MY FRANKENSLASH ON SPEEDRUNS IN THE MIDDLE OF THE NIGHT WHEN THE AVENUE IS CALM/QUIET EASY65 MPH ON ASPHALT ON OFF ROAD45-53.THE.BLX100AMP ESC& 3200KV BLX MOTOR WITH SPECTRUM SLT RADIO& RECEIVER ROCK HAVE 2 SETS THEY NEVER MISS A LICK.--29T-48P WITH A 76T-48P SPUR VERY FAST AND FUN. HAPPY MODIFIERS RC😜💪😎👍🤬☠️🤪🤟😈🤣🤪
@@RoadsideRC just ordered a V3 and learned my lesson from my first RC boat where I got bigger batteries and fried the brushed motor (rookie mistake), just get the brushless platform first.
Love the upgrade and how to videos. Your videos have quickly turned into my background music while I'm wrenching.
Love to hear it. Thank you!
I put my Senton 3S Spektrum Brushless set into my Granite Mega , it now pulls wheelies and goes 52 mph , it’s insane now !
Perfect setup for it!
Great vid Troy! I personally love my Granite 4x4! Mine is the brushless 3s BLX version, that goolrc combo I think was just a little under powered for it really to do more than the brushed system did, in the stock 3s BLX system the Granite can easily get over 30mph on a 2s lipo, on a 3s it can get up to 60+, the stock 3s BLX system is a 3500kv motor and a 100a esc, so I'm thinking maybe with a higher amp esc like an 80a you will definitely be able to get over 30mph on 2s using that 3900kv motor. Might be worth checking out before doing your giveaway with it.
Yes! I believe you are 100% correct. This combo was a little disappointing.
We have driven it more since, and I don't like this setup. I have a Hobbywing SC8 ESC that I will try in it.
Will this brushless 3s blx fit the regular granite ??
Yes!
Seen you on reddit. Good stuff
Thank you!
I feel you on the fun factor. I love my Senton Mega!
Exactly! Sometimes it is not about the 40' jumps...it is about simple fun!
Great video it has that perfect speed for messing around in front of the house
It is good for that, but I am not 100% happy with the ESC programming.
I have a Hobbywing SC8 that I am going to throw in it for giggles.
Hey Friend! Great video! Like 2
Thank you!
Thanks for sharing 👍😊
I plan to do the same because it's always good to give back.
#RC4LYFE
#KEEPDRIVING
Thank you!
Great stuff man I never used the gool RC before. The Senton I had I put the brushless set up in it. I put the hobby wing 3s in it and that thing ripped pretty good. Cant wait to see who gets the truck next lol. Thanks bud
Yes sir! I have had good luck with the GoolRC stuff before, but this one seems more like a dud.
The boys and I have driven it some more since filming this, and we are just not really happy with the ESC. I have a Hobbywing SC8 laying around (4S capable!!!) that I am going to throw in it and see how it goes. Don't really want to give it away with this poor running.
Thank you for the video ! Cool truck .
Thank you!
Higher pinion + 3s = beast 💪 Will definitely try to get in on this giveway 🤩 Brushless all the way 👍
I think this ESC might have an issue. I have had multiple GoolRC setups over the years without a problem, but this one is just not quite right. I have a Hobbywing SC8 that I could throw in it...
I need to get my hands on one of these newer 4wd Arrma’s. Great video 👍🏁
They really are good. Of course, I would recommend jumping straight to the BLX models instead of the mega.
Senton v3 is a tank, i love mine
Another great video! Nice job
Thank you!
Fun truck
It is!
Thanks for this video. My boys each have the voltage. I was looking at this one for myself to run with them. So far the voltage has held up to their abuse. Hope this one can too! Just subscribed!! Liking your vids!
Awesome!
Yes, this truck is very durable and does come highly recommended.
You can basically take 2 paths with the Granite 4x4.
1 - get the Mega and then throw a brushless setup at it.
2 - get the BLX from the start.
I would honestly suggest that you go with (2). The only real drawback is that I don't believe the BLX comes with a battery, while the Mega does. Still - with 3 trucks running, you would probably be upgrading to lipo batteries rather soon anyway.
Bro that car is a BLAST! I friend of mine has one and it’s amazing. It’s worth noting thought that the stock spur will not last under brushless power though.
Thanks! This is the new V3 - supposedly it will handle the brushless power...at least for awhile. :)
I took a mega Typhon and did it up the biggest thing holding back your speed is that spur gear I believe it's got the same one in it is I had and it's a 91 tooth I kept doing all kinds of stuff to it and the speed was never really increasing until I changed it spur gear you change that spur gear even with the set-up you got right now it'll wake it right up
Thanks!
This is the new V3 version. From the parts list, it looks like the same part as the BLX version now.
Yes sir for the most part it's the same stuff except for the slipper clutch assembly and spur gear the center bearing support on the drive shaft and the turnbuckles I believe that's it other than that I believe it's everything the same as the 3s oh yeah and also the aluminum motor mount plate
I've just fitted a brushless to ours, but without changing the pinion we've seen no speed change at all (used 2s on both motors). Running much cooler though! Our brushed motor cooked running about on grass. Got a 17T pinion coming on Monday so should see some more speed!
Great!
Just going brushless doesn't always equal more speed.. but it sure is more durable and efficient!
Hey rich what motor did you go with? I’m in the same boat toasted the first motor and am looking to go brushless but I’d like to keep the speed down as it’s for my 5 year old
Great video Troy thank you! I’m just getting into the RC hobby and waiting for my Arrma voltage to arrive. Seems like the 4WD Arrma Granite would be a lot more customizable then the voltage?
Yes - there are a lot more parts available for the 4WD than the voltage. Still, that is OK. I also have a voltage - and that thing is simply a bunch of fun. Check out my video on testing it with the stock motor, a 12T brushed motor, and then going brushless!
Very Nice video - thanks showing how to swap motor - maybe next time show us how program the brushless system...Thanks!
Thank you! Good idea!
Great Video! I'm doing the exact same thing with the cheaper Granite. I have so much stuff laying around it makes sense to use some of it. There isn't a whole lot of difference in the 2 not to try to make it a blx with leftover parts.
Thank you!
Blx has metal gears also. Metal motor plate. Theres more to it then motor an esc. If u swap to brushless an run 3s u will destroy the plastic gears inside in days lol
Cool RC and nice upgrade
Thank you!
I got one of these for Christmas and so far I've been threw 2 motors 1 servo the control arm broke and the gears shredded
Bashers do break things - that is part of it!
Well, I know a year later, that truck is long gone, but I would've loved to see a follow up video with that ESC properly programmed with the high power setting. Thanks for the video.
The GoolRC never had enough power for the truck. I swapped the ESC for a Hobbywing, and it worked great.
The truck was given away, and the new owner has been driving it without issue.
when u use the goolrc esc buy the tuner card and set throttle minimum at 25% the throttle responce is much better
Thanks for the tip!
Got my son one for his birthday, should be excited when he sees it, also might use my 3650 3600kv arrma blx motor i got onhand with my blx from my senton
Great idea! Start off brushed and let him get comfortable, then swap to the brushless setup!
Yeah, hes driven an rc but is 1/18, wltoys a959
I got a video on here of my collection so far and a few running videos
Nice video and I love your video and your unboxing
And your upgrade
Thank you.
Can this thing handle a little more powerful power unit? Like 100-120 Amps
Yes it can! Check this out: ruclips.net/video/CqTeOjhuAAM/видео.html
Yeah no shame as i know from experience but goolrc we all know is about the cheapest drop in brushless conversion out there,however your cogging is most likely due to esc if you upgrade only esc to something loke a hobbywing $60 worth every penny would be world of difference also 60a isnt gonna be what you want it will work but if for offroad use then no onroad yes with right gear but if going 60a least be a quality brand again dont ask how i know this but goolrc 3660 3300kv is what i got in stampede with hobbywing 120a esc and man its scary fast for a cheap brushless motor has lasted way longer than could of ever imagined,still going to this day have already bought other motors for experimental kv/voltage performance so far 3200kv is about as far reliable u can get higher kv only gets hotter quicker for little more power better to up battery and lower kv 😉
You are right!
Did you try the stock 3s. Brushless with arrma wide kit and 4s backflips ? The 17mm hexes are on Etsy , not widened . No rubbing . She flies , literally 😂. It’s great for the ramp , insane . Lots of wheelies otherwise and back to rollovers with 1” taller tires but it’s not bad . It’s like the granite was before the wide kit . I ran it for 3 weeks and switched yesterday . It’s been wet so I’ll see when the time comes if I like the stock tires or lp s .
Awesome! Hope you like it!
Got a vorteks boost, have added bigger shocks, upgraded arms cups wheel carriers and the 4x4 pack. Have a goolrc 3650 5200kv hoping that's not too much kv.
Also gotta hobbywing 10BL120 120amp esc.
Should make for a fun truck!
Great channel best on youtube my son and I find info really helpful and clear will you do more on the Arrma vorteks blx upgrades and maintenance etc in the future ? Hope so all the best from the uk
Thanks! I just might do more to the Vorteks. More is in the works!
That's a kool truck can't wait for the giveaway kool video you guys really do Rock !!! I got a esc card that would be awesome to win with the brushless set up and the brushed !!!!!!
Great!
I had a mega typhon, thought it was good,till I blew it away with a wltoys. Time for an upgrade!
Ha! Stock brushed is not fast, that is for sure!
what you are doing is so interesting
Thank you!
that is a nice truck!
I agree!
my friend gearing mesh if different from the mega and the blx i would definetly change the output shafts (mine broke 😅) by the same means spider gear housing as its different mesh than you put the biggest pinion you can on there and thats probably the most furable 1/10 scale basher you can have!
Thank you!
awesome vid as always I'm definitely gonna keep my fingers crossed for this giveaway id love to have a truck like that thanks for the always great content Troy
Thank you!
Will have to try with original gearing and see how much of the increase was engine and lipo swap.
What motor and esc did you pit in there because I want to know so I can upgrade mine thx !
There is a link in the video description.
Dang I would've loved to win a Grinite boost I don't mind 2wd or even 4x4 but either way they seem pretty durable for the price they are witch is really good.
Maybe you can get in on the next giveaway!
Looks like a good motor
Very well worded. :)
Yes, I believe the motor will be fine, but the ESC needs tuning or more power!
@@RoadsideRC always something to do
Cool video!! :))
Thank you!
Great video, I am in process of researching and planning on upgrading the v3 to brushless as well. In the forums people have recommended this set up: Hobbywing EZRun MAX10 SCT Sensorless Brushless ESC/3660SL Motor Combo. Thoughts on it?
Also, why did you need to upgrade the pinion from 14t - 16t?
I have used that Hobbywing setup before - it is GREAT!
I had a 16T pinion already, so put it in for a little more speed.
@@RoadsideRC Thank you so much! I'm new to the hobby and trying to learn. So you would recommend that combo setup for the Mega v3? Anything else would you recommend upgrading from your experience so far? I know the v3 is pretty much brushless ready...just trying to pick your brain on what else would you recommend to upgrade. Thanks again!
Yes. I believe that setup will work very well for you!
Otherwise, save some money for parts. Going faster, you will hit things harder, so might break more control arms and things like that.
Cool
Thanks!
👍🏻👍🏻👍🏻love it 🥰
Thank you!
Great video, but I would have liked to see the brushed speed test with the 2s instead of the nimh. Would you recommend this as a good upgrade, or would you recommend a better setup, possibly a hobbywing product? Love your content.
I have usually had some pretty good luck with the GoolRC stuff, but it seems this 60A esc is just not quite up to the tasks this time.
Instead, you would be happier in the long run with this combo: amzn.to/3bAKnLQ
@@RoadsideRC Thanks much for the recommendation. Again, great channel.
@@RoadsideRC Although, I'm not sure those 48p gears would handle that power and at that point, better off going with the BLX, from the start, anyway, as that's geared properly for brushless power up to 3s. That cheap combo probably wouldn't handle 3s, either.
Put a 23 tooth pinion and it a rock and roll on 2s
You are right!
STRONG double sided tape is made by 3M and available from Lowe's.
Good point, I have some 3M tape that I used, but not sure if it is the strongest they offer.
@@RoadsideRC Did you ever figure out what should be put in a Mega or did you get rid of it before you got it right? Would you recommend it as a place to start or would it be better to save up for something better?
The 3S BLX version really is the best place to start.
Instead of going with this GoolRC setup, I would recommend a Hobbywing Max10SCT esc with a 3500-3800kv motor. Still, that costs more than the jump between Mega and BLX...so better to just get the BLX.
Is good this type of video, help in any way i want a brushless or keep more money
Glad it was helpful!
to get the most power out of that motor, you need to upgrade to a BLX slipper clutch and maybe get the aluminium motor mount while you're at it
So far, it has been great!
No slipper issues, no motor mount issues...and I even bashed it on 4S!
@@RoadsideRC awesome! another thing, depending on which surface you run on for the day, you may want to adjust the slipper and shock height to protect the drivetrain and improve speed and handling... looset clutch and higher shocks for loose surfaces like dirt and tighter clutch and lower shocks for asphalt, but im sure you know this already. have fun!
I used the 16 pinion change out and made sure that the pinion and drive shafts connection were at the same height, placed the cover on and checked the ability for a smooth spin and connection. No dice. It seems to rough in places as I spin the drive shaft connection. Also, I can’t seem to push the whole plastic motor case back in to place far enough to get the red piece to slide in. This is a very frustrating project.
I apologize, I am really not following what is going wrong here.
When talking about the pinion change, you mention making sure the pinion and driveshaft are at the same height. I think that might be where you are going wrong, as I am not sure what you mean by height in this situation.
Getting the whole housing seated properly is 100% critical. You have to get the input from the transmission back in there correctly, or else nothing will work and you will break other pieces.
I'm happy to help if you can provide more info.
I am deciding between the brushless and brushed version of this truck. I’m assuming from this video brushless is the way to go
Yes! Unless price is really hurting you, the brushless version is a much better choice.
@@RoadsideRC nope not a problem. I want something that can compete with the JLB cheetah extreme and I’ve had a few people tell me the Arrma Granite brushless is the best deal that will compete. I’m pretty new to RC but as with everything I do I go all in. thanks for the quick response.
I would think brushed since it comes with the charger
Makes sense!
Hopefully i win this thing
Yes sir!
I have the same ESC, dif motor. It's disappointing that the ESC can't be programmed without some extra piece of equipment.
Seems most ESCs are that way?
Most ESCs have a programming mode you enter into and then the receiver/transmitter can change all the settings.
Def gotta go with brushless. Also, I have an older version of the senton mega, with the weaker diff gears in it. Do the new mega gears got the older models?
* Do the new mega gears **fit** the older models?
I would assume they do, however do not know that for a fact.
Good atuff
Thanks!
Aside from the electronics. Are there any other differences between the megas and the 3s?
Yes - the older Mega had a different pitch gearing and some other small changes. Not a big deal though.
ive got the mega 4x4 brushed v3 to, so dont we have to change things further while converting besides esc and motor and pinion.? cause the box says its brushless ready
I didn't change anything else - and the truck took 4S!
Go for it!
You left the stock center diff though...I thought that had to be changed as well?
This truck doesn't have a center diff.
There is a slipper clutch instead.
So far, the factory spur gear has held up to 4S brushless power!
@@RoadsideRC lol yeah I'm a Newb that's what I meant but I'm a little slow. Well that's good to know.
Hey Troy great video I have tge same truck and converted it to a spectrum 4000kv brushless motor and spectrum esc but it still just doesn't have much punch power to it I've got it set to the highest level but don't help do you know what I need to change to help my low end tourqe? Tia
That 4000kv is quite a high KV for this truck.
You can try going down in pinion size to help it out.
Hey So I just found another deal at tower hobbies for a scratch & Dent box of the granite 4x4 brushed version for $179. No warranty though. Do you think it's worth it? I want to pick up another 1/10 scale (also have a rival mt10) so the throttle can be dialed back and the kids can play with it. Kind of thinking about going for the 1/10 outcast 4s instead, running on 3s@50% for the kids, 4s for me! You think too much car for a 6&7 year old? I definitely wouldn't even consider letting them drive my kraton 6s exb. I'm thinking the outcast might be manageable, but if not maybe this granite? What do you think? Not much experience with kids and RCs. Obviously outcast would be way more fun for me when their not using it 😂
I would suggest going Granite for the kids.
@@RoadsideRC have you experienced many issues with the granite as far as dependability? People seem to complain about the slipper clutch, drive shafts popping out, etc. Just wondering your experience with it. Thanks!
@pizzomedia7261 As far as RC trucks go - they are one of the toughest you can get!
did you have any overheating issues with the stock brushed motor and ESC? I've only done 2 battery runs on mine and it got very very hot both on the NiMH and Lipo battery packs.
Brushed motors do tend to get hot...and have short life spans.
Double check the gearing mesh between the pinion and the spur. It might be a little tight, which causes it to work harder.
@@RoadsideRC thanks so much for the reply and advice. Subbed and appreicate your content.
Thanks for the sub!
Happy to help out.
@@RoadsideRC one more question, do you have a link for a different combo besides the coolRC brushless combo?
@@preacherpauldudley-do-righ1080 This is the Hobbywing setup I would recommend. The Max10SCT is a super-powerful ESC that can handle almost anything you throw at it. The 3200kv is a little lower than what comes with the stock BLX model, but would provide really good power. amzn.to/2Pez6Ig
Is your way to make the body like different can I put a outcast body or something on it?
You should be able to fit other 1/10 monster truck bodies on it.
Hey bud what do you use for recording if u don't mind me asking
I use multiple cameras. Phone, GoPro, and Insta360 Go.
Thank you bud
I’m looking to do this same thing I’d like to go brushless but keep closely the same speed as brushed, what would you reccomend?
The good news, even if you use the stock brushless setup, you can always limit the speed with the controller.
I would suggest going with the stock brushless setup, or perhaps this one: amzn.to/3gb3vEI
Or use this better ESC: amzn.to/3euHEra
Paired with this motor: www.amazon.com/dp/B073DDT7NY/ref=cm_sw_r_as_gl_apa_gl_i_REPPVCT52BVG5VENACK1?linkCode=ml2&tag=roadsiderc-20
Yeah problem is I wasn’t trying to spend that much, just bought it last week for my 5 year old to get the hang of things and now I’m already having to upgrade to brushless, looks like I should’ve just bought the blx from the start and ran a smaller battery in it. So you wouldn’t reccomend any of the goolrc kits?
@@jmorrow8122 I do not recommend any of the GoolRC kits. I have used many of them over the years. Their ESCs always give up rather quickly. Their motors can be pretty good though!
Why are you already upgrading to brushless?
@@RoadsideRC well the first motor burnt up in a few days so I went and got a titan which has been doing good but now the esc only lets it run for about 5 minutes then it goes into thermal protection for some reason
Im thinking of buying one after i sell my drone.
Does anyone have a vid on how to put a Camera/GoPro on these?
I have personally used a bunch of different ways to mount cameras on the trucks. I highly recommend it is a physical bolt-on mount. Adhesive is typically not strong enough.
I have the same motor and esc. I think the teeth on my motor are too big for mine. There's a huge lack of power.
You can increase the pinion size to see if it helps. Otherwise, it should be just like mine.
@@RoadsideRC not motor, i meant the pinion. It's the same size as the oem, the teeth are just too big. It catches every other tooth on the motor (new to this and its my first RC)
@@RoadsideRC thank you!
Dude i got 2 goolrc esc's for a redcat tornado buggy and a mini e-revo. Coggs no matter what pinion/program card setting i use. 2s battery. Dumbo rx/rx. Any suggestions?
Those ESCs probably don't have enough power. You need a more powerful ESC.
Also - what motor is in it?
@@RoadsideRC I'm not sure what kv, no markings, , got both used. The tonado and mini erevo are both stock brushless redcat and valenion respectively. Esc is 120 amp. Kinda frustrsted, might go brushed with the redcat and forget the taxxas totally.
Bad idea with GoolRC, it set on fire my Slash @-@
I have had pretty good luck with them.
Would’ve liked to see the result without the pinion swap,
Thanks for the feedback!
What motor would you reccomend for this car, budget around 60$
My go-to is Hobbywing. Something in roughly the same kv as the stock BLX.
Mine just has a constant beep and does not work
Sounds like it is not getting the right signals. Check all of your wiring connections.
What battery does it have and how long does it last?
Are you talking when stock?
Now modified brushless, I run a 3S lipo, around 5000mah. It runs for 15min or so.
cool. will it run on 4s?
It will not with this ESC. This is 2S and 3S only.
What kind of set up I need for high speed racing
What type of racing are you planning on doing?
@@RoadsideRC dragg and short course, and I want a rig just to be fast just to be..lol...I wanna Race my Granite second generation and the typhon when I get it.
Did you put the speed on 100
Yes sir!
There is no 2s only Gool :P
I just treat them that way!
is this way too overpriced? I cant get more specs and metal cvds plus shocks in the same price in chinese brands
You will find the Arrma 3S line is VERY durable and has great parts support.
How do you enter the give-away?
It has not been announced yet. Stay tuned!
When are you gonna announce the giveaway
Not sure yet.
I have a different giveaway already in process.
which battery connector is it?
I run an XT90 on all of my vehicles.
@@RoadsideRC You're very kind thank you very much. Do you have networks in case I have a question, can you help me?
Top speed with gool rc motor?
It is in the video, right?
Check around 6:45
@@RoadsideRC oops missed it
Hello I’m getting into Rc I’m here for the give away what do I need to do ?
This is old. The giveaway is over.
How do I even enter the giveaway?
This giveaway has not been announced yet.
@@RoadsideRC oh ok I thought I missed something
Hey btw what camera do you use?
Gopro hero8
I bought a used blx100system 3200kv motor and then I bought a granite mega 4x4 tried it stock brushed before putting the blx100 in it and let me tell you 30mph out of the box 🖕know maybe 14mph and right out of the box it got so 🖕ing hot you smell the motor burning but on the positive note blx100system in it rocks it's fast but it's fun .I also modified a brushed.slash actually a.super mod FRANKENSLASH😎💪😜🤐💀☠️🤬🖕, MY DOING AND ON 2 & 3s.its A SPEED DEMON SO MUCH DIFFERENCE MY FRANKENSLASH ON SPEEDRUNS IN THE MIDDLE OF THE NIGHT WHEN THE AVENUE IS CALM/QUIET EASY65 MPH ON ASPHALT ON OFF ROAD45-53.THE.BLX100AMP ESC& 3200KV BLX MOTOR WITH SPECTRUM SLT RADIO& RECEIVER ROCK HAVE 2 SETS THEY NEVER MISS A LICK.--29T-48P WITH A 76T-48P SPUR VERY FAST AND FUN. HAPPY MODIFIERS RC😜💪😎👍🤬☠️🤪🤟😈🤣🤪
Wow who did the first dislike lmao
Ha! Don't worry - there is always some.
@@RoadsideRC it's like the feeling of getting first like he must be stocked he got one of the first lolll
that thing stock is lame af
Brushless is certainly better!
@@RoadsideRC just ordered a V3 and learned my lesson from my first RC boat where I got bigger batteries and fried the brushed motor (rookie mistake), just get the brushless platform first.
I guess I did not realize that this is called a V3 also.