I saw a video where the 614 was on a bridge inside a valley screaming to the heavens, I wonder if that's where they got the quilling whistle because of the echo or if they digitally created it. look up "steam whistle talent - Steve Wickersham" on RUclips.
Eric, you did a great review on another great engine! Thanks for taking the time! I have the 3rd Rail version of the "Patrick Henry" (#601 class J3), but this review makes me want to buy this model!!! 😁
I must say that if it wasn't for your reviews on these higher end locomotives I would never get close to them. We buy second hand and mostly off of that "Famous on Line auction place" so the info you share is valuable. My wife, in profile photo, has the "O" scale stuff for her ceramic buildings. I just love to watch 'em roll by. Thank You. Greg and Jeanne
I wonder why moving baker gear isn't a more prevalent feature in the newer steam locomotive models. I have the PS 2.0 version of this steamer which also has moving baker gear, but there are a lot of PS 3.0 models that don't have it. It's quite simple to do afterall; instead of having the bell crank pinned to the gear connecting rod; they've created a sliding slot connection, which allows the bell crank to move independently of the gear connecting rod. This in turn allows the bell crank to be driven by the movements of the valve rod and the combination lever. You'd think that MTH would want to use this for more steamers equipped with baker gear, since it looks slightly more prototypical.
as far as I now, in the early eighties, the 614 was actually used in revenue service through the New River Gorge on the Chessie hauling coal trains. it was used as 614T to experiment new cleaner burning coal for the ACE 3000.
MTH really nails it when it comes to valve gear/lubricatior rod detail. Mainly because it's there unlike other modelers and the fact that it moves. Lionel's done that a few times but not as consistent as MTH
Great review and very objective. Despite the large gap between engine and tender, your review will prompt me to order one of these for my collection. Your reviews are comprehensive. Wish they would have made the passenger announcement for the George Washington.
I think that the C&O USRA Heavy Pacific that they made might have that in its station announcements. The Imperial Streamlined Hudson has the Fast Flying Virginian.
An excellent review, Eric! Those J3a's are one of my favorite steam locomotives. MTH did a great job on this release. In realism and detailing it far exceeds the original release from 1999. I feel that the reason MTH changed engine #602 to #612 is that the J3a would not have been an accurate rendition of the 602 which was noticeably different. One little known fact is that the J3a's were originally intended to have a streamlined shroud similar to the L class Hudsons, one of which, resides at the museum in Baltimore. Hence the solid pilot, combined sand and steam domes along with a few other special design features. Although I cannot vouch for the authenticity of the whistle it does sound great and the bell sound is authentic for that class engine being that they were activated by an air ringer. Most any video of C&O 614 will verify that. One of my favorite features are the Timken roller bearing rods with the tandem side rods between the 2nd and 3rd drivers. Those absorbed piston thrust.
Eric this is phenomenal. great review of a classic Loco and model. Do you have any reviews of O scale 2 rail equipment and conversion steps from 3 rail? I believe there are 2 rail products available but am researching this. Pricing? Need your expert advice and suggestions. I have a 15 x 22 basement space and wonder if that is enough space for O scale. Thanks so much.
Does anyone know what other cities are mentioned in the PFA sequence? Norfolk, VA. Richmond, VA, and Detroit, MI, are in the video. They would have to be any 3 of these: Newport News, VA, Charlottesville, VA, White Sulphur Springs, WV, Charleston, WV, Huntington, WV, Ashland, KY, Columbus, OH, and Toledo, OH.
AWESOME engine and review Eric! MTH does a great job with their passenger PFA, sounds great, but I'm not a big fan of their chuffing sounds (needs more bass)! Anyways, thanks for the video bro!
I really cannot pick if I want the Lionel Greenbrier thats up for pre order or the Brass Hybrid Challenger in the 2022 Vol. 2 catalog, I know this is MTH, but I'm trying to see how it looks.
I rlly want one of these engines but I have a small layout , not wide enough turns for an engine this size , the running system for an engine like this and they just cost too much , is there any good lion chief , lion chief plus or lion chief 2.0 steam engines that are on the larger side that I can get for cheep?
i do believe that the C&O got some of these engines from the RF&P railroad, which was a very famous and profitable road. Which operated from Alexandria Virginia to Richmond Va. It was a short lined and it seems that MTH, for some reason never made a premier model of the Northern type engines of the RF&P line which used the vanderbilt tender.
During a mid 1950's surge in freight traffic the C&O borrowed a handful of RF&P 4-8-4's which were also numbered in the 600 series. One that was borrowed was RF&P 614 so C&O's 614, which had been recently pulled out of storage, had its cab number changed to 611 by use of a chisel and hammer. Her original 614 cab number was only restored after Ross Rowland acquired and restored her back to service.
@@westtexasrailfan he's Profile picture is a photo from Olympic the older sister from Titanic and I tell you it's probably the best troop transport ship I know that served in the war
Hi Eric! I need some help. I have model trains but i have a problem with getting enough track power so i was wondering if you could tell me how you get enough track power Thanks!
Let me try this again, my mac book auto corrected some stuff. I am a blind person wanting to get started into MTH Trains. Please make a video of where the buttons are on the DCS commander, and where they are? like what i mean is, starting from the top buttons, and moving down the remote. I am so fascinated, i didn't know if a totally blind person such as myself, can run the MTH Trains.
That MTH C&O 612 is Really Upsets Me But I Like the Lionel C&O 612 With the Paint Scheme Way Cooler and When Will the Lionel C&O 612 Chessie Train Arrive
The quilting whistle is I’m pretty sure the same whistle as the mth reading and northern 425 the light blue color not the new dark blue one since I own the light blue 425
Understood. You have so many other videos to make one didn't have time to make another. I'm guessing the MTH A-B-A review is coming out soon. Can't wait!
SkrezzyTrainGuy The light isn't flickering. The camera makes it look like it's doing that. I own plenty of new MTH Premier Line locomotives and they don't do that on my engines in person. It's the camera, not the engine.
I like very much your videos but I have a bit of a question! why did you opted for the three rail version of the O scale against the two rail version? It is so much unrealistic! Your layout is outstanding but sincerely it would look much better in two rail version! thank you very much for responding!
hello Eric. I am a blind person who wants to get started in running math trains. Can you please make a video about where the buttons are on the dos commander, and what they do? and i don't know if i will need sighted assistance while programming an engine into the remote.
Развлечения
A 4 - 8 - 4 steam locomotive by any name is still awesome! Great video great engine.
Even after all this time, this is by far the best whistle I've ever heard on a model steam locomotive
I saw a video where the 614 was on a bridge inside a valley screaming to the heavens, I wonder if that's where they got the quilling whistle because of the echo or if they digitally created it. look up "steam whistle talent - Steve Wickersham" on RUclips.
Found it. Amazing!
ruclips.net/video/fRVAUdtcklM/видео.html
Eric, you did a great review on another great engine! Thanks for taking the time! I have the 3rd Rail version of the "Patrick Henry" (#601 class J3), but this review makes me want to buy this model!!! 😁
Thanks for the great history lesson Eric .Beautiful engine
This is incredible! I love the J3a locomotives too. What beauties they are! I love the review as well. I really thank you a bunch.
Beautifully detailed engine Eric! Love the whistle sounds also. Thanks for sharing!
Thanks
I must say that if it wasn't for your reviews on these higher end locomotives I would never get close to them. We buy second hand and mostly off of that "Famous on Line auction place" so the info you share is valuable. My wife, in profile photo, has the "O" scale stuff for her ceramic buildings. I just love to watch 'em roll by. Thank You. Greg and Jeanne
Hi Eric, no one does a review like you. You're the best...Frank
I wonder why moving baker gear isn't a more prevalent feature in the newer steam locomotive models. I have the PS 2.0 version of this steamer which also has moving baker gear, but there are a lot of PS 3.0 models that don't have it. It's quite simple to do afterall; instead of having the bell crank pinned to the gear connecting rod; they've created a sliding slot connection, which allows the bell crank to move independently of the gear connecting rod. This in turn allows the bell crank to be driven by the movements of the valve rod and the combination lever. You'd think that MTH would want to use this for more steamers equipped with baker gear, since it looks slightly more prototypical.
great review as usual Eric 😀😀
Wow. MTH has really out done themselves with this locomotive. Moving baker valve gear, great whistle, accurate bell ring rate, just awesome.
Nothere27 That bell ring is accurate? Seems awfully fast to me.
If you watch videos of the 614, the ring rate is this fast.
Not for a stationary bell.
Yes it is
I was responding to Matt-Trainlover9943's comment, not Nothere27's comment. Sorry for the confusion.
I love the way the drivers look on the Greenbriers and the N&W J Class Northerns
I’m hoping to get one of these someday it looks so beautiful
as far as I now, in the early eighties, the 614 was actually used in revenue service through the New River Gorge on the Chessie hauling coal trains. it was used as 614T to experiment new cleaner burning coal for the ACE 3000.
MTH really nails it when it comes to valve gear/lubricatior rod detail. Mainly because it's there unlike other modelers and the fact that it moves. Lionel's done that a few times but not as consistent as MTH
I agree great whistle. Great model.
Awesome video Eric!
I love it but I think I will wait for an MTH Premier Line Chesapeake & Ohio 2716 2-8-4 Kanawha.
Me too gotta love the MTH
Great review and very objective. Despite the large gap between engine and tender, your review will prompt me to order one of these for my collection. Your reviews are comprehensive. Wish they would have made the passenger announcement for the George Washington.
I think that the C&O USRA Heavy Pacific that they made might have that in its station announcements. The Imperial Streamlined Hudson has the Fast Flying Virginian.
Very nice Eric!
An excellent review, Eric! Those J3a's are one of my favorite steam locomotives. MTH did a great job on this release. In realism and detailing it far exceeds the original release from 1999. I feel that the reason MTH changed engine #602 to #612 is that the J3a would not have been an accurate rendition of the 602 which was noticeably different. One little known fact is that the J3a's were originally intended to have a streamlined shroud similar to the L class Hudsons, one of which, resides at the museum in Baltimore. Hence the solid pilot, combined sand and steam domes along with a few other special design features. Although I cannot vouch for the authenticity of the whistle it does sound great and the bell sound is authentic for that class engine being that they were activated by an air ringer. Most any video of C&O 614 will verify that. One of my favorite features are the Timken roller bearing rods with the tandem side rods between the 2nd and 3rd drivers. Those absorbed piston thrust.
Eric, When will your review of the Lionel smoke fluid loader be out?
Great video! What do you use for your rail finish?
Thanks
Eric this is phenomenal. great review of a classic Loco and model. Do you have any reviews of O scale 2 rail equipment and conversion steps from 3 rail? I believe there are 2 rail products available but am researching this. Pricing? Need your expert advice and suggestions. I have a 15 x 22 basement space and wonder if that is enough space for O scale. Thanks so much.
Does anyone know what other cities are mentioned in the PFA sequence? Norfolk, VA. Richmond, VA, and Detroit, MI, are in the video. They would have to be any 3 of these: Newport News, VA, Charlottesville, VA, White Sulphur Springs, WV, Charleston, WV, Huntington, WV, Ashland, KY, Columbus, OH, and Toledo, OH.
Did they make 611 with smoke deflectors?
AWESOME engine and review Eric! MTH does a great job with their passenger PFA, sounds great, but I'm not a big fan of their chuffing sounds (needs more bass)! Anyways, thanks for the video bro!
I've never seen you run your trains that FAST !
I like the mixed consist. It looks like an excursion of private railcar owners.
Fantastic!
That's awesome!
I really cannot pick if I want the Lionel Greenbrier thats up for pre order or the Brass Hybrid Challenger in the 2022 Vol. 2 catalog, I know this is MTH, but I'm trying to see how it looks.
Eric or anyone who may know, what whistle is the quail whistle. Would really love to know.
We Love Trains 🚂 🚂 🚂 💕💕💕 We All Love Trains 🚂🚂🚂😊😊😊💕💕💕🚂🚂🚂😊😊😊 😘😘😘
Great review! Lol, Erics not gonna stop buying 4-8-4s until he has one from every railroad.
like both steam Whistle. very cool.
I rlly want one of these engines but I have a small layout , not wide enough turns for an engine this size , the running system for an engine like this and they just cost too much , is there any good lion chief , lion chief plus or lion chief 2.0 steam engines that are on the larger side that I can get for cheep?
Eric the other two paint schemes of the 614 aren't they the chessie safety express and the ace 3000 proyect
I recommend the DCS app to get a clear quilling whistle
i do believe that the C&O got some of these engines from the RF&P railroad, which was a very famous and profitable road. Which operated from Alexandria Virginia to Richmond Va. It was a short lined and it seems that MTH, for some reason never made a premier model of the Northern type engines of the RF&P line which used the vanderbilt tender.
During a mid 1950's surge in freight traffic the C&O borrowed a handful of RF&P 4-8-4's which were also numbered in the 600 series. One that was borrowed was RF&P 614 so C&O's 614, which had been recently pulled out of storage, had its cab number changed to 611 by use of a chisel and hammer. Her original 614 cab number was only restored after Ross Rowland acquired and restored her back to service.
Eric you should make a building called "Erics trains" the business sells model trains
I thought it was a good idea :)
R.M.S Olympic he already did! By the way I love your profile picture!
@@westtexasrailfan he's Profile picture is a photo from Olympic the older sister from Titanic and I tell you it's probably the best troop transport ship I know that served in the war
hey Eric how many 4-8-4 locomotives do you have
I live in strasburg va and I’m Obove Clifton forge
I wish I had a train like that
What a beautiful steam engine.
PS! I watched your Layout Update #7 - Appalachian & Western Railroad
so I have your answer ! thank you !
I like that train it’s awesome
Hey Eric, can you please bring back the bloopers that you used to put at the ends of your videos. I ❤️ them.
Trainman 419 I still do them, but only if I actually have some to put in. I didn't have any for this video.
Hi Eric! I need some help. I have model trains but i have a problem with getting enough track power so i was wondering if you could tell me how you get enough track power Thanks!
Gina Dean add more transformers
I live in Strasburg Virginia Clifton forge is two hours away
Hey Eric Lionel has the CO 21 inch passenger cars
Pretty neat
when you were talking about the Fire box a small piece of hair or something flew by lol
So Eric, the locomotive sounds come from the tender and not the locomotive, right?
This Is Great We Love Trains 🚂 🚂 🚂 We All Love 😘 😘 😘 🚂🚂🚂😊😊😊💕💕💕
such a lovely train, by mth
For the price the draw bar kit should be included, not something you have to buy. Plus the screws just under the stack at the boiler front?
Let me try this again, my mac book auto corrected some stuff. I am a blind person wanting to get started into MTH Trains. Please make a video of where the buttons are on the DCS commander, and where they are? like what i mean is, starting from the top buttons, and moving down the remote. I am so fascinated, i didn't know if a totally blind person such as myself, can run the MTH Trains.
I'm really glad to see more C&O models coming out. Do they make a nice C&O passenger train car set for O scale?
What MTH need to make is a model of the C&O Hudson with the yellow paint scheme in the premier line.
I'd like to see more C&O models made all the way around but, I'm a huge C&O fan lol
I'm new to modeling railroad. I've been collecting HO SCALE but this is great. Is this "0" SCALE? Love it. best whistle iv heard.
Robert Dickson O scale it is.
Dang mth is on a role!
Eric what are the flags for and what do they mean?
Steamking Number 15 serve the same function as class lights. Green usually meant 2nd section of a train.
That MTH C&O 612 is Really Upsets Me But I Like the Lionel C&O 612 With the Paint Scheme Way Cooler and When Will the Lionel C&O 612 Chessie Train Arrive
R u in Florida? I’d love 2 see your layout
No, Georgia
The crew talking was kinda like the j3a Hudson as you start it up, the bell sound is like it too but faster, I also liked the standard whistle better
I don't even like 4-8-4s but i was in love just looking at the thumbnail. I hope someone makes an ho model of this.
Broadway Limited makes HO models of this engine but they're out of stock at the moment.
i love this hobby its just so Damn expensive
you should get the MTH Chessie Steam Special 2101
you've got to upgrade your camera, the 24 fps is so choppy and it doesn't look great to watch, but nice video!
EarliestBook49 60fps would be amazing
i must agree
Why is it not 614?
Is 614 ever gonna be running again?
No I don't think so
This Is Chesapeake & Ohio J3a Greenbrier They Were Named Northerns After The Northern Pacific Railroad J3a Greenbirer
The quilting whistle is I’m pretty sure the same whistle as the mth reading and northern 425 the light blue color not the new dark blue one since I own the light blue 425
Hey Eric, will you plz update your website? like if u agree THX
Is it just me, or does the quilting whistle sound like the a.t.s.f blue goose whistle?
can you review the longisland railroad subway please
LIRR Subway? Do you mean the LIRR M Units or the NYC Subway train?
mta subway
NYC sub
Oh I see. Yeah those would be cool. The New LIRR G5 would be cool too
___Axg96 ___ yep
She's beautiful
You got that right, 210% agreed
Mth knows there engines
And.yes it was pulled by 614
Eric, did you hear? Atlas O is not making trains anymore. They just announced it this morning. Sad day for some of us. :(
April Fools
Yep!
I've liked every April fools video you've done. You should do more.
I will do more. I just didn't have to time to do one this year.
Understood. You have so many other videos to make one didn't have time to make another. I'm guessing the MTH A-B-A review is coming out soon. Can't wait!
I hope Lionel makes one
I will be selling ALL of my O-SCALE trains and tracks on E-Bay starting in April. I am downsizing to HO scale.
Ryan what's in your collection?
This the first time I saw so much steam come of a lionel train
614 is most famous from hauling the chessie safety express
Humph... MTH always has that stupid flickering light.... But anyway, Nice video Eric!
SkrezzyTrainGuy The light isn't flickering. The camera makes it look like it's doing that. I own plenty of new MTH Premier Line locomotives and they don't do that on my engines in person. It's the camera, not the engine.
The greenbrier is good but the K3 Mikado is the most Godly engine on the C&O (in my opinion).
Idk why but I feel the whistle should be on a Mohawk NYC
My brain hurts reading some of these comments.
You forgot about another first class express train : the C&O safety express
I like very much your videos but I have a bit of a question! why did you opted for the three rail version of the O scale against the two rail version? It is so much unrealistic! Your layout is outstanding but sincerely it would look much better in two rail version! thank you very much for responding!
Wait! You can’t use that New York Central observation Car Because People can say “This is Not the 20th Century Limited.
hello Eric. I am a blind person who wants to get started in running math trains. Can you please make a video about where the buttons are on the dos commander, and what they do? and i don't know if i will need sighted assistance while programming an engine into the remote.
I meant MTH.
Actually Eric, they called it the Greenbrier because of the Greenbrier River.
Greenbrier river
Why is It Numbered 612 instead of 614?
+timothy wiggin
He said why in the video.
The Reason I’m saying it because the New York Central Observation Car has the drumhead Saying 20th Century Limited.
NYC NIAGRA 6010
I'm surprised you didn't get a Freedom Train.
who said I didn't?
Andrew Jackson uh oh!!
Oh no
MPT 482 how in hell do I find you on almost ever person who does train videos?
2716 Productions idk lol I just love ❤️ 🚂 so much
Chessie safety express 614
This is basically what a class j would have look liked from the N&W without the streamlining because there both class js
It kind of looks like they reused the headlight mounted numberboards from an N&W J3
Laurie Sarquis - When you look at an unshrouded N&W J class, it is very different. And, the neat thing is that MTH did the unshrouded version as well.