Timestamps Close look at the Tegu24: 3:50 Installation: 5:58 Binding: 8:44 Furitek FuriCar app overview: 9:39 First run on the course: 17:40 Custom throttle curve: 19:49 More course runs: 21:08 Key takeaways: 22:41 Final thoughts on the Tegu: 28:30
Hey Adam. Thank you. Just got done with hurricane Ian, and now tomorrow we will be hit by Nicole. Point is 😮your videos give me a break from storm prep and relaxes my head for a bit. Appreciate you!!! Mike in Florida
Hey my friend I’m in the same boat. I’m in Orlando I had some water damage in the house during IAN, it has been a crazy month for me fixing everything I can myself getting the house in order because dealing with these insurance companies is a pain in the neck. And now is dejavú all over. I’m literally beat up my friend no energy left to start all over. Pray you and your family make it thru ok and safe brother. Don’t know you but we share the same pain. God bless. 🙏🙏
@@acrccrawlers9548 wow. I’m so sorry. We are in Seminole County in Lake Mary. This is just too much. But I think of the people on the coast. All is gone. And this was merely a cat 1. We should hook up some time
@@michaelkav6345 you are so right there are other that had it worse than we did. Thank God we survived this one without a scratch. I hope you did too. Yeah sure I have a bunch of 1/10’s collecting dust in the garage due to the lack of a good place to run them. Even thought about selling them. I got into the 1/24 scales but really haven’t got the time to enjoy them.
@@acrccrawlers9548 I understand. I’m relatively new at this but have amassed a modest collection. I’m an older guy but still a kid. Glad you and yours made it ok.
Can you use the Furitek or even like a FlySky GT5 on both the scx24 and a txr4m? What all do you need if so? Do you only need a TX and RX or do you also need a new esc for each model also? Thx. Great content.
I have been excited for this vid! We talked about it on IG. The Tegu is great, everything in one compact package. Thanks Adam! Pro tip: I ordered the smaller plugs for my NSDRC servo. I can get rid of those chunky adapters and save some space.
Yeah I’m the same way matching components, I’ll have to check out that speed controller I do have their monster truck could use this to clean up wire management
Very cool addition. I am having a hard time with the price of the Avatar so probably no all in one esc/receiver for me, but it does look like a nice setup.
I bought one of the very 1st Tegu's back when Furitek was just emerging onto the scene and I haven't been disappointed one single second, Great system pairs with the Komodo ! I am seriously looking at a Cayman and another Tegu.
I have a sudgestion about the wires you should coil them up on a screwdriver and then heat up with a hair dryer as it makes it look great inside and be less messy
I cannot confirm as my Tegu hasn't arrived yet but on 1/10 scale I'd try raising the FOC value...it will smooth out the transitions...by design it is to keep the same power to the wheels at different vehicle orientations. This should fix the jumping a bunch, hope it helps.
Thanks for watching! It's certainly not something that will appeal to a mass consumer base, but for those in the midst of a conversion, or planning a brushless conversion, certainly worth considering!
Yeah I’m still fiddling with my avatar I do like that new speed controller, ain’t got that one yet, got my other Max smasher yesterday the blue one Think I’m going to paint the white one black my favorite color for my RC’s . Appreciate you sharing I’ll be following for more I want to learn more about the avatar, catch you on the next one peace and chicken grease 😁👍👍😎
Hello I have this tegu 24 pro also the Komodo mini… but I would like to use my futaba transmitter… am I going to have to buy that dang furitek transmitter to be able to use this stuff?
Very nice 👌 I use a tegu micro komodo in fcx24 . I hear ya I want it to help clean up the electronics the struggle is real trying to fit it all in. I run the lights and I personally really like them being able change what they do in the app
That's kinda my problem with this, you use a plug for your motor, one for your steering servo, one for your front bumper lights & before then, you feel like you're running out of plugs for anything else, would be my issue. One reason why I think I might stick with the stock ESC since it has more plug ins. 🤔
Very true. You've only got the one plug for auxiliary components, If I had put this on the deadbolt and used the 4WS, there would be nowhere else to plug any future accessories in unless I wanted the Furitek LED light kit specifically.
Have you worked out that bump in speed? Also can the avatar be used on more than one vehicle? Considering getting it since I already run an older Tagu, and would like a second one.
The only thing i dont like about the Avatar is its lack of buttons, and switches. I doubt it, but I wonder if a radiolink TX would bind to one one these.
It is a minimalist design. The joystick function is nice, but I would almost rather have more buttons available for instant toggling on/off of various functions.
@@CapeCrawlers I'm a tactical person. I like having buttons, and switches readily available, vs menu diving everytime I want to do something. Hopefully they come out with a non-minimalist design, because it's really the only thing stopping me from choosing it.
You'll need to get the Avatar transmitter as well and thats a big investment to run a brushed motor. But it will give you added functionality to adjust your throttle curve, drag brake, etc. So I would say if you plan to go to a brushless motor in the near future, sure. If you are happy with your current motor, I don't think it's necessary.
@@all-natty I know you can use the Lizard Pro with bluetooth esc with a brushed motor and stock transmitter (V1 electronics only). This specific Tegu I dont think you can. But the Lizard Pro is a cool addition because you still get all of the customization options for your throttle curve, drag brake, etc. via the app on a brushed setup.
Timestamps
Close look at the Tegu24: 3:50
Installation: 5:58
Binding: 8:44
Furitek FuriCar app overview: 9:39
First run on the course: 17:40
Custom throttle curve: 19:49
More course runs: 21:08
Key takeaways: 22:41
Final thoughts on the Tegu: 28:30
Do I need an aftermarket remote as well or can I pair this with the stock one?
Hey Adam. Thank you. Just got done with hurricane Ian, and now tomorrow we will be hit by Nicole. Point is 😮your videos give me a break from storm prep and relaxes my head for a bit. Appreciate you!!! Mike in Florida
Stay safe Michael! My best to you and your family. I'm happy I can do a little something to take your mind off of Mother Nature!
Hey my friend I’m in the same boat. I’m in Orlando I had some water damage in the house during IAN, it has been a crazy month for me fixing everything I can myself getting the house in order because dealing with these insurance companies is a pain in the neck. And now is dejavú all over. I’m literally beat up my friend no energy left to start all over. Pray you and your family make it thru ok and safe brother. Don’t know you but we share the same pain. God bless. 🙏🙏
@@acrccrawlers9548 wow. I’m so sorry. We are in Seminole County in Lake Mary. This is just too much. But I think of the people on the coast. All is gone. And this was merely a cat 1. We should hook up some time
@@michaelkav6345 you are so right there are other that had it worse than we did. Thank God we survived this one without a scratch. I hope you did too. Yeah sure I have a bunch of 1/10’s collecting dust in the garage due to the lack of a good place to run them. Even thought about selling them. I got into the 1/24 scales but really haven’t got the time to enjoy them.
@@acrccrawlers9548 I understand. I’m relatively new at this but have amassed a modest collection. I’m an older guy but still a kid. Glad you and yours made it ok.
Can you use the Furitek or even like a FlySky GT5 on both the scx24 and a txr4m? What all do you need if so? Do you only need a TX and RX or do you also need a new esc for each model also? Thx. Great content.
I have been excited for this vid! We talked about it on IG. The Tegu is great, everything in one compact package. Thanks Adam!
Pro tip: I ordered the smaller plugs for my NSDRC servo. I can get rid of those chunky adapters and save some space.
Thanks for watching! I need a nsdrc servo in my life.
@@CapeCrawlers Totally worth the money.
So many features, so much control! Another great video Adam, thanks as always!
Thanks for watching!
Yeah I’m the same way matching components, I’ll have to check out that speed controller I do have their monster truck could use this to clean up wire management
Very cool addition. I am having a hard time with the price of the Avatar so probably no all in one esc/receiver for me, but it does look like a nice setup.
It is on the high end of transmitter/RX upgrades.
I bought one of the very 1st Tegu's back when Furitek was just emerging onto the scene and I haven't been disappointed one single second, Great system pairs with the Komodo ! I am seriously looking at a Cayman and another Tegu.
This is my first experience with the Tegu. It's a very nice piece of hardware!
I have a sudgestion about the wires you should coil them up on a screwdriver and then heat up with a hair dryer as it makes it look great inside and be less messy
Great tip! I've since learned the coiling, but the hair dryer is a great idea.
I cannot confirm as my Tegu hasn't arrived yet but on 1/10 scale I'd try raising the FOC value...it will smooth out the transitions...by design it is to keep the same power to the wheels at different vehicle orientations. This should fix the jumping a bunch, hope it helps.
Huge help, thanks!! So would a higher or lower FOC produce the smoothest transition?
Higher
@@warlocksixRC I'm going to give that a shot when I get home. Thanks again!
Let me know how it turns out so I have a head start in settings when mine shows up :)
you can save your bread ties and use them to keep your wiring clean
Very good tip!
Really nice, not something that I would get but it is a nice combo. Great video as always. 👍👍
Thanks for watching! It's certainly not something that will appeal to a mass consumer base, but for those in the midst of a conversion, or planning a brushless conversion, certainly worth considering!
Yeah I’m still fiddling with my avatar I do like that new speed controller, ain’t got that one yet, got my other Max smasher yesterday the blue one Think I’m going to paint the white one black my favorite color for my RC’s . Appreciate you sharing I’ll be following for more I want to learn more about the avatar, catch you on the next one peace and chicken grease 😁👍👍😎
I'll keep posting updates as I keep learning. We'll have a field manual developed eventually!
Hello I have this tegu 24 pro also the Komodo mini… but I would like to use my futaba transmitter… am I going to have to buy that dang furitek transmitter to be able to use this stuff?
Very nice 👌 I use a tegu micro komodo in fcx24 . I hear ya I want it to help clean up the electronics the struggle is real trying to fit it all in. I run the lights and I personally really like them being able change what they do in the app
The LED light control in the app is impressive! I don't have the kit so I can't comment first hand, but I bet it's awesome!
@@CapeCrawlers yea you won't be disappointed if you pick one up. It works really well for me!
Great video , are you able to use 3s battery's !
Thank you, and yes, it is 3S capable.
Kinda sucks that the stock esc doesn’t work with the furitek if I knew this long time ago I wouldn’t have bought 4 broncos 😅
It’s a bummer the V2 doesn’t maintain that compatibility of the V1. It’s a big added cost of the conversion, especially if you’ve got 4 of them!
@@CapeCrawlers yeah it’s nuts I f up lol specially when one oh the broncos weight in over 1kg and non of the plug in motors can move it up a slope
That's kinda my problem with this, you use a plug for your motor, one for your steering servo, one for your front bumper lights & before then, you feel like you're running out of plugs for anything else, would be my issue. One reason why I think I might stick with the stock ESC since it has more plug ins. 🤔
Very true. You've only got the one plug for auxiliary components, If I had put this on the deadbolt and used the 4WS, there would be nowhere else to plug any future accessories in unless I wanted the Furitek LED light kit specifically.
@@CapeCrawlers Right.
I figured out my servo issue it was the d/r was turn all the way down
Love it when it's an easy fix!
@@CapeCrawlers yes and makes it faster to go play
Have you worked out that bump in speed? Also can the avatar be used on more than one vehicle?
Considering getting it since I already run an older Tagu, and would like a second one.
I've smoothed it out considerably but it's not gone completely. The Avatar can store 10 different trucks as long as they all run Furitek rx's
@@CapeCrawlers thank you.
@@CapeCrawlers Did adjusting the FOC, as Warlock Six suggested, help/work? Thanks!
The only thing i dont like about the Avatar is its lack of buttons, and switches. I doubt it, but I wonder if a radiolink TX would bind to one one these.
It is a minimalist design. The joystick function is nice, but I would almost rather have more buttons available for instant toggling on/off of various functions.
@@CapeCrawlers I'm a tactical person. I like having buttons, and switches readily available, vs menu diving everytime I want to do something. Hopefully they come out with a non-minimalist design, because it's really the only thing stopping me from choosing it.
What brand of 3s batterys do you recommend?
I've been running the spektrum 300mah 3S batteries. I like them a lot! They're inexpensive, small, and have good run time.
@@CapeCrawlers Have you tried any of the bigger battery like the 500mah or bigger?
@@AM_Animation_4 I have not only because I am really happy with the ones I have!
Clean 😊
Should I get one for my buzzsaw in my ultra24??
You'll need to get the Avatar transmitter as well and thats a big investment to run a brushed motor. But it will give you added functionality to adjust your throttle curve, drag brake, etc. So I would say if you plan to go to a brushless motor in the near future, sure. If you are happy with your current motor, I don't think it's necessary.
Nice buddy 😀😀👍👍
Thanks!
wait how much money was that crawler
build because I kinda want one like it
I’m in it for ~$800 or so I think
Is it possible to bind with turbo racing transmitter?
I don’t believe so. I am fairly sure the tegu is specific to the avatar and vice versa
Can you bind with a stock receiver with this combo?
No, I don’t believe you can. The tegu is exclusive to the avatar I am fairly certain
i want to get me this for my C10
It's a great combo. I really like it!
Can you just replace the sec with the stock one and not have to change your receiver
For a brushless setup?
i have a brushed motor
can you put the furitek esc in and not have a brushless motor or new receiver
@@all-natty I know you can use the Lizard Pro with bluetooth esc with a brushed motor and stock transmitter (V1 electronics only). This specific Tegu I dont think you can. But the Lizard Pro is a cool addition because you still get all of the customization options for your throttle curve, drag brake, etc. via the app on a brushed setup.
How do u record your runs
I use my iPhone either by hand or with a small gimble. I drive with the left hand and record with the right
@Cape Crawlers ok thx that will help to film more yt videos for me
I have to get me one
You won’t regret it 👍🏻
what rims do you have?
The Mofo RC ultra premium wheels and black rings. Love them!
they look so sick man love your videos keep up the great work
keeping your electronics clean is the worst!
Doesn't look water proof... 😕
No, definitely not!
@@CapeCrawlers but it does look real nice and clean... curious if there is a way to water proof it?