Installation | GlowShift 7 Color Series Boost Gauge for Cars and Trucks
HTML-код
- Опубликовано: 14 авг 2018
- Learn how to install a GlowShift 7 Color Series Analog Boost Gauge for cars and trucks with a turbo or supercharger and monitor pressure levels to avoid overboosting.
Get A Turbo Boost Gauge Here: goo.gl/59Se3d
BOOST GAUGE KITS
Car and truck boost gauges are pressure gauges usually mounted on a dashboard, radio slot or driver’s side pillar which display boost pressure for an internal combustion engine. They are key to any vehicle running a turbo or supercharger. GlowShift has a variety of electronically and mechanically driven boost and boost vacuum gauges to monitor the boost and/or compression levels of your application.
7 COLOR GAUGE SERIES
7 Color Series Gauges come standard with a cutting-edge design that will enhance your vehicle’s interior. Depending on which version you select, you’ll have the choice of a black or white gauge dial with a magnified clear or tinted lens and illuminated red needle. Easily cycle through the 7 Solid Color Modes and 2 Color Cycles available for the analog LED display. Solid Colors include Blue, Green, Red, Teal, Yellow, Purple and White.
AUTOMOTIVE BOOST GAUGE INSTALL ACCESSORIES
Boost Adapters: www.glowshiftdirect.com/boost...
Expandable Circuit: bit.ly/2wJIXsl
View our entire product lineup at www.glowshiftdirect.com/
CONNECT ON SOCIAL:
Facebook - / glowshift
Instagram - / glowshift
Twitter - / glowshift
#GlowShift
Category Autos & Vehicles
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process. 
Авто/Мото
This guy's got the perfect voice for tutorial videos
Im pretty sure he was hired and recorded himself reading the script
that’s the point
This was a really helpful video because I've got the same model WRX as the one they used, but really I just keep watching this because the presenter has such a soothing voice.
Great video! Only thing that’s silly to me is to disconnect the battery to cut a vacuum tube and reconnect it for all the electrical work.
We agree, but we have to say it.
Some where morgan freeman is sharpening his blade plotting to take this guy out 😂
God tire comment
You added a hose clamp onto the new boost gauge hose on the tee fitting after you cut the boost vacuum hose from the car. Shouldn't you have added 2 additional hose clamps to the original vacuum hose that was connected to the tee as well?
I also thought the same when I saw that
No. It will never build pressure so it won't blow off and the fitting is built for a specific size hose to slide on but ribbed so the hose has trouble coming off.
Better safe than sorry Imo
It is VACUUM and not a line with pressure. A barb is all it needs.@@hunterwest3689
super professional video and great representation love it!
Thank you! We're glad you enjoyed it.
thanks a lot! this video help me install gauge~ huhu
Sounds like a wonderful 6.0 I the intro. :)
Lol that’s what I thought too. 6.0 Powerstrokes have such a unique and bad ass sound.
Wow! It was soo informative video!
1:40 I would put some of that electrical plastic look stuff on it for extra protection but that’s me
This is a really good video
I would literally watch any story this narrator tells me.
I want to use this on a Gen 6 Camaro with the 2.0. Guys usually use a throttle body spacer and run a barb off the throttle body spacer to a hose to the gauge. Will that method work as well with this gauge?
Para instalar no subaru 2010 aspirado e a mesma parte elétrica ????
Does it to the cool start up thing
Do you need a fuse in the top of the extender
Why do you have to tap into a 12 V constant and a 12 V Ignition source for a mechanical gauge that makes no sense to me.
just dawned on me. the constant power is needed for the selected color scheme.
What size hose did you guys use in this video?
i think its funny how their instructions say not to use on pillars with airbags but then have a video of them using it on one that has an airbag
Cant find the firewall hole in my gen 7 celica
That voice though! 😀
Im thinking of buying the 3 pod pillar mount for my 06 Subaru Impreza WRX STI.. Want a boost,volt,fuel pressure setup. Question is can I use the same constant hot, headlight, etc connection for all gauges?
Yes, we also offer 3 gauge wiring kits which will allow you to connect all of the gauges to a single power wire.
Is it the same process for the digital style gauge? 2004 Dodge Neon SRT-4
Yes.
Hey there, just finished putting mine in today, looks really good! The needle is a bit sticky and hesitant, is this just due to factory boost tunes so it's a bit meh or is it something else? I'm making 8-10Psi. Cheers.
Which series gauge do you have?
@@GlowShift The tinted 7 colour, 30 psi series.
@@GlowShift Hello?
Please contact us at 1.888.GS.GAUGE
@@GlowShift This is for anyone that has the same problem as me, apparently, it is due to a pinched or creased line causing the improper flow to the gauge. The line I used is pretty stiff so I don't see how this could be the case. Maybe if my car made more power the needle would be a bit more responsive. Or a got a faulty gauge...Who knows I've learned to just deal with it.
cant you just tuck the wire under the fuse. just like remote wire for subs and such!
Someone have installed this one into a mk7.5 gti? I have problem to identify the vaacum hose
Good luck!
Where exactly did you run the vacuum line through the firewall into the cabin?
There are always 2 holes for cables to the dashboard (left and right), from the left are passing the cables from battery,alarm etc.
There’s a grommets that you can feed the lines through that you can do right behind the pedals in the Subaru wrx
A very informative and professional video. It helped me install my gauge successfully. I have the installation video on my channel. Thanks and good work.
So I did everything exactly as shown in the video except I had to spice wires to extend them to the fuse box as I am mounting the gauge in the vent next to the hazard lights button and there is no power to the gauge. Where should I start?
Double check all of your power connections then double check the fuses that you connected to and make sure they are 12 volt.
Necesito un reloj de temperatura digital de 250 grados Celsius y un reloj de aceite para un motor Big Cam 3.... en Panamá
Can I connect 2 gauges to the same power source on the fuse box?
yes
Can you stack the adapters for the fuse or will it over load because I ordered 3 gauges from your site
Yes, you can connect up to 4 gauges to one fuse.just make sure you separate out the colors of the wires. All reds together, all yellows together, all oranges, together, all blacks together.
Does the kit come with ALL the parts? There’s parts there I haven’t seen before
Yes or no depending on how and where you are going to install the boost line. Expandable circuits for power are not included.
Why cutting the oem line? You can just remove it from the bpv add the tee, using the supply line in the kit and cut a little part that you connect to the tee in the bov, so you dont have to cut the oem line.
anything works
Can my dad do this on my dad‘s car?
What is the purpose of adding both a 12V and a 12V source at the ignition? Is it because the gauge has a memory function? I assume this is not necessary when the gauge does not have a memory function?
Yes, it's so the gauge will remember the color setting.
Can I just use the Ignition wire and ground wire
What type of wiring would I use to extend the power source?
18 gauge automotive wire
I have a 2005 Audi a4 with automatic headlights. Where do I install the orange wire? I looked and could not find a headlight switch fuse
You can wire it to the headlight switch.
PLEASE HELP I'm looking for boost gauge for procharger, oil pressure and oil temp gauges for a 2010 challenger srt8. I also need everything to hook the guages up. I would like to put on pillar post.
I haven't had any luck getting this info through email. I have throat cancer so hard to talk on phone.
Thanks Sid
Unfortunately, we do not currently offer a pillar pod for the Challenger. You would need to use one of our universal pods to mount the gauges. The gauges on the other hand we do have. Just visit our website and add them to your cart. Our website also has a live chat feature that you can use to talk with a customer service representative about your order.
Does it come with the ground wire
Yes
The music sounds like from automation from steam.( a car , engine building game)
Okay what about grounding or neutral wire
The black ground wire from the gauge should be connected to a clean reliable grounding source under the vehicle's dash.
What is the fuse you have in your extendable circuit before adding the one from your fuse box? Im confused on why there are 2 fuses instead of just the one you are replacing
That 2nd fuse comes with the expandable circuit.
@@GlowShift okay I didnt know if it was necessary to add an extra fuse other than the one your using in the box because I am using a fuse tap that has 2 slots but Im only using the one slot with the fuse im substituting and didnt know if I should be adding some sort of 2nd extra fuse?
@@right2knowpodcast The expandable circuits you purchased should have come with a 2nd fuse. Both the factory fuse and that additional fuse need to be placed into the expandable circuit. That's why there are 2 slots.
@@GlowShift okay yeah i couldnt fond any expandable circuit or fuse taps that actually came with a fuse..just the fuse plug and 2 empty slots so is it required to have an extra fuse in it? And if so what amp?
And thank you for responding being that this specific info is nowhere I can find on the web about the extra fuse..
Nice video but plz for the love of God Dont just press the extra wire behind the dash at least put Some zip Ties around to make it neat
What would I need just to get the lights on? No dimming and nothing just to turn them on
Connect the yellow wire to constant 12-volt power and connect the red wire to ignition only 12-volt wire
my mans got the civilian version of the how its made voice
Same process for 2018 civic hatchback?
Yes, most likely.
Genuine question. why all the wires? what else do you power asides from the light?
The color memory function.
My gauge isn't accurate and making a loud hissing noise but everything is connected
Please contact our customer support so we can help you resolve this issue.
I have an 04 wrx where should i ground mine to ??
Under the dash.
Do u need to have turbo to install GlowShift? I'm 15yo just started doing with cars.... I have a volkswagen 4 // Gplf 4 - 2004 2.0
You need a turbo or super charger to install a boost gauge. Our other gauges can be installed without one tho.
Damn my local napa just charged me almost the exact same price of a glowshift gauge, just to buy 3 add-a-fuse
Do you have a video on installing a volt gauge?
Unfortunately we do not have one yet.
its the same process without the pressure hose
Was looking for an install where the vehicle doesn't have a factory boost gauge.
It’s the same thing find a vacuum hose
My WRX didnt have one, and this video allowed me to mount it properly
So I hooked everything up and it lights up as it should I’m able to to change the color on the gauge, but when I turn the car on it don’t read the boost? The needle doesn’t move at all? Any help would be appreciated as I’ve already checked everything
This gauge will only show a boost reading when your vehicle is actually under boost.
Any way to install without the expandable circuits?
Can wire tap them into existing vehicle wires.
Just bought one and it did not come with a t fitting or anything came with a very small boost line and screw on fittings?
A t-fitting only comes included with a boost/vacuum gauge. The boost only gauge you will need to purchase a t-fitting separately if that is how you plan on installing your boost line.
@GlowShift I installed a new 7 color 30psi Boost/Vaccum gauge and it reads well below zero when the car is off, is there a way to calibrate these things? I would return it but the purchase was in Dec 2018, so I am a bit past the 1 year warranty... Any help would be appreciated, this is for a Huron Speed LS1 t4 V3 kit, On3 Billet 84, trying to get it tuned and would be nice to know what the turbo, wastegate and boost controller are doing.
Please contact our customer support and they will be able to walk you through on how to adjust the gauge.
Will adding this void a warranty?
Our gauges do not connect to the factory sensors and do not interfere with the vehicle's operating system so adding our gauges should not void your warranty.
What do I do if the colors don’t change
Check that the lens of the gauge has not been twisted and is making the button stick. If that is not the case then please reach out to our technical support by calling or using the live chat feature on our website.
yall know that the same guy thats narrating did the narrating for the Dukes of Hazzard movie
How can you power 3 separate gauges? Wouldn’t the fuse box be consumed by expandable circuits?
No, you can wire multiple gauges into each expandable circuit. So put all the red gauge wires together into one circuit. All the yellow gauge wires together into another circuit. And all the orange gauge wires together into a third circuit.
Can you use the same ground point as well?
@@jeremycarter5244yes
Mine won't save the color everytime I shut the car off and start it again the color needs set to what I want
Make sure the red wire from that gauge is connected to a constant 12-volt power source and not a 12-volt ignition only source.
I have an 04 wrx and I don’t know where the hole is on the firewall to run the line through
albert moore behind your clutch
Yes, check up behind your pedals.
Mine is ran through passenger side where wires come out, but a pia to see under dash to locate wire
My lights are always on and never turn off!
Double check your wiring
how do i get through the firewall of a legacy gt
Grommets are usually on the driver side behind the pedals.
I set the light color to white, but every time I started the car, the light turns back to blue. Is that normal?
That means the red wire from the gauge is not connected to a constant 12-volt power source.
Can I just run power and ground? I always want my gauge light up instead of having to turn my headlamps to see the gauge
Yes, just leave the orange wire disconnected.
Yeh don't do it threw head lamps find an AC something that turns on when you turn the key cigarette lighters do it
Why does it need 3 power sources? Can i just use 1 when the ignition is on?
The constant 12-volt source is used for the gauge to remember your color setting and the headlight sources is used to enable the dimming feature or night time driving.
@@MrJay1027 Sounds like you connected them to a constant 12 volt power source.
My gauge stays on when the car is off. What am I doing wrong? I followed the steps exactly.
I have an mk4 gti 337.
U have to connect it to something that only turns on when you turn the key and turns off when you take the key out like your head unit cigarette lighter
I just installed an oil pressure gauge, boost gauge, and wideband from you guys. When i turn the key both the oil pressure and the wideband do a little swoop with the needle, but the boost gauge needle remains still(doesn’t swoop). Is this normal?
Yes, that's normal. Our boost only gauge is mechanical where the other gauges are electronic.
@@GlowShift okay thank you
I know this is a year old @fatsleepypanda did you have any problems with hooking the fuses up with all the different gauges
Mine swoops once and flashes then goes and sits on 0
How do I connect to my turbo? On a motorcycle
You're gonna want a boost/vacuum gauge. It will come with a t-fitting that you can put on one of the vacuum lines coming from the turbo.
Is there any way to calibrate the unit? Mine reads 22 inches of vacuum at idle, it’s a well known fact that 20” is normal for a stock engine without much overlap or lift, so is this adjustable? I believe it’s losing the two pounds of boost I am missing on the top end of boost, since it’s basically a bourdon tube that can send electrical signals to the gauge, and if it’s wrong at idle, it’s wrong in boost as well.
Unless your testing facility is deep below the earth’s surface, where the air is at 16.7 psi instead of 14.7 psi, lol!
Would have been nice for eventual replacement of the unit with a new one, if you had used a small mini usb connector at the back of the gauge, so that once you’ve wired it and plumbed the vacuum, when it comes time to replace it, you’d only have to unplug the connector and vacuum line to replace the instrument, instead of having to get back under the dash to rewire it.
I have a feeling that I just bought an inaccurate entry level gauge that will not give me accurate results. It’s pretty, but if it can’t be calibrated, it’s junk as far as I’m concerned.
You can loosen/tighten the jam nut on the back of the gauge and it will adjust the needle.
@@GlowShift sounds good, I’ll go try that, thanks for the quick response!
Hi would like to get it but lots of coments in amazon about not accurate
Hello, the accuracy of the gauge depends highly on the location of the t-fitting installation. If the t-fitting is installed to our recommended location, then the gauge will read the proper readings.
@@GlowShift I just bought it 😬
Feel free to reach out to us if you have any questions during installation.
@@GlowShift I will be installing on a Volvo c30 R desing
@@GlowShift Would i still be needing the t fitting if i have a throttle body spacer that gives me access to for the vaccuum line
I have one, but everytime when I start my car the light is blue... And I want to be red.. any ideas?
Did you hook the yellow gauge harness wire up to constant power? The yellow wire gets connected to constant power so the gauge will remember the color when the vehicle is turned off.
@@GlowShift that makes sense ive purchased a car with the 3 pillar pod. But it resets everytime the ignition is off. Also it turns off and on randomly throughout when i drive. Sometimes wont turn back on until i stop driving for a bit then turn it on. Do you think its a wiring or a ground issue?
Glowshift is the boost gauge is same as vacuum gauge?
Depending on which boost gauge you purchase, it may or may not come with a vacuum reading. There are boost only gauges and boost/vacuum gauges. They are not the same.
nice work i have question i purchase one where i conect the green wire i have 09 dodge ram 1500 tanks guys
Sure, what is your question?
GlowShift Gauges i have tachometer and i ready conect ground and power supply now i don’t know where to conect the green wire on the engine i have 09 dodge ram1500. ,
Are those wires 22 gauge? If so, can they can spliced with 18 gauge wire or the size has to match up?
Yes, you can.
So T off of the wastgate?
No, T off of the blow off valve.
my GAUGE came with a very small hose and no T fittings.
Where did you purchase the gauge from?
@@GlowShift Amazon. I sent it back though. Figured I got the wrong one.
How many amps are there on that expandable circuit?
I believe they suggest a 4 or 5 amp fuse for the gauge
This works on any car?
As long as the car has a turbo.
@@GlowShift 🤣🤣🤣
I couldn't help but die of laughter at that response. Holy lord that's gold. 🤣🤣🤣🤣
So did he install 3 boost gauges? Lol didn't see what the other two were.
There were 3 gauges installed in this vehicle however, only the boost install was shown. Other 2 gauges were fuel pressure and wideband.
My god this guys voice makes anyone jelous.
what about the elite 10
I've install this same gauge on my civic with the same installation and the lights dont even come on unless you turn on the amber or headlights. Got annoyed and wired it up my way and now it's working but not properly
Sounds like a wiring issue. Please contact our customer support and they will be able to help you resolve the issue.
@@GlowShift how can it be a wiring issue when I connect the wire the same way as you guys did on this gauge. Sounds to me like a defect gauge
Yeh bro try another gauge and see if it does the same thing
Does all 3 gauges use same 12 volt power wire?
Yes, you can connect them to the same 12-volt power wire.
Mine doesn't have any lines just a electrical line that runs out to the engine bay with a plug any help would be nice don't know if anything else attaches to the other end of the wire other than to the gauge
Is it a GlowShift gauge?
@@GlowShift yes I just bought a electronic boost pressure sensor and on idle it stays all the way on the last digit, is that correct shouldn't it be on zero ??
If the vehicle is turned on then it will be in vacuum, which would cause the gauge to read lower than zero.
@@GlowShift I bought the boost pressure sensor from glowshift and the wire that came out of the Guage fit right to it, are they specific to certain gauges or should mine be okay? Haven't tested it yet , I got it T'D off from the blow off valve line
It should be ok. If you have any further issues please call us 1.888.GS.GAUGE
What size vacuum hose? My kit didnt come with
It should have. Where did you purchase the gauge from?
Do these actually work? Theyre seem cheap.
Yes, they work.
Sounds like swamp people
Do I need to have a turbo installed in my car in order to get one boost gauge??
Yes.
That's a real "duh" question.
Bruhh
worse cable management ever