Lenovo Ideapad 320s (13 inch) Full Teardown Guide

Поделиться
HTML-код
  • Опубликовано: 22 авг 2024

Комментарии • 29

  • @oscarmike47
    @oscarmike47 5 месяцев назад

    great video. perfect for what i needed. you really explained what you are doing. a lot of videos simply do it and expect one to follow. thanks!

  • @LarryMoffett
    @LarryMoffett Год назад

    Thanks! I had removed the screws from the bottom cover but as it wouldn't lift off I couldn't figure out how to remove it without damaging it.

  • @einat1622
    @einat1622 Год назад +1

    7:27 what is the black square like part that covers the motherboard? (upper left).
    Where are the RAM and processor?

  • @andrehanderi7075
    @andrehanderi7075 3 года назад +1

    how to remove the lcd from the case? i cant see any screw unlike 14 inch version

  • @mohamadkhairunishak7396
    @mohamadkhairunishak7396 3 месяца назад

    Can we increase the ram because i need to increased it to 16gb

  • @jesuspenamarco3737
    @jesuspenamarco3737 Год назад

    Hi , When I lift the lid, the upper right hinge rises as if it had no connection and everything is fine. any ideas ?

  • @steliosv5753
    @steliosv5753 3 года назад

    need the following parts ideapad 320s 15ikb (palmrest and bottomcase)

  • @wanchai9488
    @wanchai9488 3 года назад +1

    What type of SSD use on this model?

  • @user-op1fy4qb5w
    @user-op1fy4qb5w 7 месяцев назад

    4:48 battery

  • @mikeperez8631
    @mikeperez8631 2 года назад

    Whats the model number for the battery?

  • @15jalatua95
    @15jalatua95 3 года назад

    Hi there, do you have some suggestions on how to fix no display on this laptop. The motherboard is booting, there is light and fan noise. The other channel say to unplug and plug ram. Since this variant can't do so, do you know how to fix it?

    • @Mrvioleto
      @Mrvioleto 3 года назад

      take the display apart slowly and carefully using a strong plastic lid or something to not damage the screen, then make sure the display ribbon is connected well

  • @huyhuyffpro1
    @huyhuyffpro1 4 года назад +2

    Can you show me where its RAM is?

    • @bitesizetech1369
      @bitesizetech1369  4 года назад +3

      Thanks for watching. Like i mentioned in the video, there is no RAM slot. It is soldered into the motherboard. It cannot be upgraded.

    • @huyhuyffpro1
      @huyhuyffpro1 4 года назад +2

      Oh no, the store where sold me the laptop said that it could upgrade so i have just buy a RAM. Thanks for your information. Thank you.

    • @bitesizetech1369
      @bitesizetech1369  4 года назад

      Can u let me know how many inches is ur 320S? Double check that it is exactly the 13 inch model because 14 inch model does have ram slot.

    • @tiagodumont4422
      @tiagodumont4422 4 года назад

      What about the keyboard?

    • @bitesizetech1369
      @bitesizetech1369  4 года назад

      Hi i said in the video that its almost impossible to replace keyboard because they used a very difficult to open mechanism and u might spoil the chassis. But its possible to do, once you do you need to use something maybe like super glue to put back together if not keyboard wont be as tactile.

  • @vyneshindenmc6181
    @vyneshindenmc6181 2 года назад

    Hello, does it have a backlit keyboard???

    • @LarryMoffett
      @LarryMoffett Год назад

      Yes it does, to switch it on press Fn + space bar, once for low brightness and twice for high.

  • @intiazrohan120
    @intiazrohan120 3 года назад

    hi there!
    my keyboard is damaged is there any way to replace it by myself?

    • @bitesizetech1369
      @bitesizetech1369  3 года назад

      Yes, buy a replacement, follow the video and pull out the metal holding the keyboard on.

    • @bitesizetech1369
      @bitesizetech1369  3 года назад

      When u put the new keyboard just glue them together after

    • @intiazrohan120
      @intiazrohan120 3 года назад

      @@bitesizetech1369 wont that damage the laptop?

    • @bitesizetech1369
      @bitesizetech1369  3 года назад

      The pins holding them together are binded hard so theres no other way. The damage will not be visible on the outside once you replace the keyboard. Personally, I did just that and it works exactly like new afterwards.

    • @bitesizetech1369
      @bitesizetech1369  3 года назад

      But do proceed with caution and be patient when you pull out the pins