Reasons why your Chinese Tao Tao quad won't start!
HTML-код
- Опубликовано: 16 июл 2024
- If you can't get your quad Chinese quad (mine is a Tao Tao 110) to start up, try these things!
#taotao #canyonlaketexas #quad #quadrepair #taotaotips #faq #4wheeler #4wheelers 
Авто/Мото
Good tips. It’s funny but it’s those little things that’ll leave us scratching our heads as to why the darn thing won’t start. Lol. The fuel switch would totally have me stumped.
Every one of those things has stalled us at one point or another...
Also check the solenoid, stator, voltage regulatory and lose wires. An loose wires to the safety brake on start up. Your welcome.
You mean Chinese quad, Japan has real mechanical engineering, the Chinese don’t make hybusa
You mean Hayabusa.
@@shootinnscootin5545 I’m 54 getting real forgetful! 👍thanks
Thank you for this. Japanese manufacturing and Chinese manufacturing are polar opposites.
Mine only has had carb issues 1 time in 4 years. Great starter quads
That's great! Not leaving fuel in the carb / tank or using a fuel storage additive for the off season will definitely help.
Love This one
Your video helped thanks a lot
Glad to hear it! :)
do i still push the break? i have to push and then put it into drive for it to start
How could I tell if it’s just the battery needing to be charged I bought it early November haven’t used it had it in garage it’s a Christmas gift to my son today I went out to fire it up an don’t start just cranks but don’t turn over. And now it’s barely cranking any suggestions 3:41
It definitely wasn't the battery if it was cranking. With a dead battery it won't do anything. Put a battery charger on it and start from scratch. Make sure it has gas of course. If it's got fuel and the battery is back to full, next start following all the tips in the video. I know these quads can seem like a real pain & the lack of good instructions force us to rely on RUclips videos but it's usually something simple and small like making sure the gas shut off valve is open or making sure the ignition switch is on. Both of those two things will cause it not to start while it's turning over and I show in the video where each is located. Good luck with it! You can do it!!
I get mine on , it's ride for 2 minutes and just turns off while riding. Been serviced 2 times , brand new carb. After it shuts off just ends up clicking a bunch . Help lol
That's a weird issue with a new carb. The clicking part is what confuses me. Sounds more like a charging / battery related issue.
How could I tell if it’s just the battery needing to be charged I bought it early November haven’t used it had it in garage it’s a Christmas gift to my son today I went out to fire it up an don’t start just cranks but don’t turn over. And now it’s barely cranking any suggestions
Check the voltage on the battery
I changed the starter and put a new battery in mine and now you can hear the starter but it’s not engaging the motor to start?? Any thoughts
I've never replaced the starter on one of these but I'm assuming you probably have shims or something similar to make sure it's lined up, similar to a car? Sounds like the starter is just out of alignment if it's not engaging. Compare the old one and the new one side by side and make sure there are no minor differences. Remember, all of these parts are Chinese and very cheaply made.
I got the taotao 110 for my kids. Started right out out the box and ran great. She doesn't like to ride it much in the winter and thats where i had issues. When its going to be parked for a while, i turn off the fuel and run the carb dry. I have found they are real difficult to start months later after that. They seem to flood real easy, which is what happened again today. I finally gave up. I loosened the drain screw on the carb and parked it. Ill try again in a few days. I did get it started initially, but turned the choke off too soon. I have finally learned my lesson and im not going to drain the carb anymore.
Yep, that's the way to go! I did the same thing.
Done everything sounds just like yours.. wants to but just won’t turn over. I have less than 30 hours
Try playing with the cable going to the accelerator, it may be turned too far out limiting the amount of fuel. You can adjust it where it meets the lever.
@@SunsetProjectsTX I tried that too
If you know fuel is passing through the carb then start checking all your electrical stuff, spark plug, wire, fuses. You might also replace the battery in your remote shut off switch. My remote doesn't have designated on / off buttons, just one button so it's hard to tell if I have the shutoff engaged or disengaged. Check the shut off relay too. Other than that I would smell the fuel and make sure it didn't go bad. Sorry I couldn't be of more help! Good luck! @@eddieserna5494
Mine turns over but won’t start. I replaced the battery and spark plug. Maybe carburetor issue?
If it still had fuel and sat over the winter, probably so. The replacement carburetor is so inexpensive it's easier to just order a new one on Amazon or eBay than to clean it out. Try spraying starting fluid, if it acts like it's going to start, it's your carb, filter or a clogged line. Most new carbs come with all of the above for less than $20.
How to straight wire a 2013 tao tao 150cc dune buggy engine
Ignition coil spark plug
Why when I press the button on the left to turn it on it just clicks nothing happens
Usually that's a pretty good indicator that your battery needs charging if power is making it through the ignition switch and to the starter button. If it was a fuse I don't think you'd hear any noises. Also make sure your cables to the battery terminals are not loose. Is the headlamp bright or dim before and while pushing the starter button?
We replaced our battery and it’s bright but still clicks? I hope you can help me troubleshoot. Thank you so much in advance
@@khaalishablair4293 When you push the starter button it just clicks? Check your battery terminals, wires etc, also the inline fuse to start. Hope you get it running!
If I disconnect my red terminal. And jump the terminal to wire with voltage meter. It shows the quad drawing voltage with everything off. Is this normal?
What about carburetor, spark plug, coil, stator, cdi, wiring, bad gas, starter, them are the main reasons why they don’t start most times. Yours needs a new filter and possibly carburetor worked, wouldn’t hurt to change plug too.
Carb on mine was replaced in another video lol. Yes all of those things would cause an OLDER quad not to start. Most of the people watching this video just bought one and can't figure out why it's not starting. The items I went over pertain to the novice user just getting started. I may cover those things as well in another video for those of us with older quads.
japanese???
Yes, Tao Tao is a Japanese company.
My better judgment and google would disagree. Chinese all the way.
Same Reason my Tao Tao won't Start, its a POS Brand 😂
It didn't start!!..
What exactly is it doing?
Dude insulted the Japanese . Chinese wish they made anything as good as the Japanese. 😂
Yes, my bad.
Your video is not informative, dislike!!
mine turns over but won’t fire
I would check for spark at the plug before proceeding further.
Omfkngod