Nice video! I also like the end with your little guy enjoying the ride. My boy turned 18 and I always remember how much fun we had together. Get all the hugs you can brother...you'll blink your eyes and he'll be 18.
Thank you so much for your videos and knowledge! I have completely restored 2 sunl 110cc quads from ground up watching your videos over and over. My daughter and I thank you :)
@@PraskaBoysGarage I got it governed down so he can't go to fast in 1st gear. The training wheels work awesome and I can't even pull the bike over on its side. He has a 110cc xpro atv and he rides it like he stole it.
@@PraskaBoysGarage also he watches your videos with me. I have have learned a lot and have now been working on several china quads I got from junkyard. Most have been bad wiring issues. Motors all ran with a little love 😆😆😆
Can i get the 125 cc cylinder kit from same supplier ? I got a 125 engine thats locked up and would like to rebuild it and swap it out for my 110 . Any help would be great , and keep up the great vids , i know alot of people put down the china atv but they seem to forget the motors are honda clones and honda has been doing it right for a long time this is why the motors are used in the china buggies as well as atvs , sure the chassy parts can be crap but if you take care of the motors they can last a long time ..
Great content! You have helped me with maintaining our 2007 ATA-110/B1. After watching your videos, I'll be repairing the small oil leak our's has developed.
My 7y/o is wanting a Quad bad. I came across your channel yesterday and has me confident in these 110 clones. Picking a new one up tomorrow and gonna talk my father in law into digging out the one he picked up years ago (wasn't running) for my oldest but he never did anything with it.
@@PraskaBoysGarageif there is a little oil on the back of the spark plug and it smells like gas, am I going to have to rebuild the whole motor? My second question is where did you get your red motor stand?
Awesome job brother!!! Can’t wait to see the bike all put together, I can see and appreciate the hrs put into her ! Doing a rebuild that’s for the family you always want to do it right !!!
@@PraskaBoysGarage I have a 125cc Chinese pit bike engine that I’m hoping this video will help me figure out which seal is bad. Somehow the tube coming off the crank case breather got plugged so pressure built up and now even though it’s unplugged oil is leaking from the engine case 😬 EDIT: when I say “somehow”, I mean, “I plugged it because I am a dummy and was closing off emission bits since I changed the carburetor!” OOps! “Alexa, please send me more gaskets...”
This was a pleasant surprise. I have been waiting for this video. Love your videos dude! I am rebuilding a 125 Chinese engine right now. I was about done and the plastic plug that covers the timing mark broke in the case cover. When removing it, the pieces went into the cover. Had to remove it and of course the gasket tore. Now waiting on parts...again!!
Been there man! Honestly I completely forgot to order my chrome covers but I wasn't going to make that the reason this video got delayed any longer! Like always thanks for watching Tom!
I’m a Big fan, I love your videos and your content absolutely awesome and has helped me a lot with my own projects. The only thing I want to ask is can you do a video on the necessary tools needed to fix these types of engines.
i have a couple of 110 pit bikes ready to get them going really like what you did and will help me so much ..... just wishh i had your set up ..... any videos of it ...
Thanks for the great video I have gained quite a knowledge in order to rebuild a atv for my kids I’m stuck at starting the unit it seems to take a while to start haven’t done a compression test yet I will get a new plug and perform a comp test. I just discovered one of the exhaust manifold bolts broken would that cause a compression issue to turn it over It’s a 110 cc Tao Tao engine any info would be helpful. Thanks
I’m working on a Tao Tao 110 and was wondering how do you connect the front brake lines to the actual front brake on the bars one has two little spike things sticking out and the other has two female ends but they don’t fit I think I might have ordered it wrong. And for your rear brakes do you replace them or try to fix I’m trying to fix because they r in pretty good shape, but they just not working like there not stopping wondering if u have any tips
In this build I am completely replacing the rear breaks with a complete disk brake kit that's already filled with fluid. However it is cheaper to fix the brakes you have and I agree with Max. Check your fluid, might require the brakes to be bleed again. If you can shoot me an email with pictures of the front brakes. Id be happy to take a look at it.
God bless bro! There is not alot of videos and manuals on these engines. I attempted to open one up and figure out why it would pop out of gear. A r-n-d 125cc which I believe is very similar? Well the engines were cheaper back in 2015 so after a month of the engine just in parts on my work bench, I opted to buy a new engine instead since the rebuild kit/ gaskets were half the price of the new engine. I went to a 3 speed semiautomatic with reverse. Now years later I have 6 atvs. For the family to ride around our property. On the 3 speed, I have 2 atvs that will pop out of 2nd gear randomly. Do you have a clue what this might be? Any info would be greatly appreciated..
So I found a four wheeler on the side of the road and I got it to turn over but never got it to crank so I’m buying a whole new wiring harness like you did and to see if it’ll run well. It was submerged in the water, but it still turned over will it still crank
Hey i’m replacing the same side of my crank case at 6:57. What torque did you use when tightening the bolts? And was that red paste silicon? Thank you!!
We all have our fail moments! Editing gives the power for content creators to eliminate those moments, but I feel it's important to share mine every now and again :)
At 6:18 you took the side cover you took off to replace gasket. So what's the bolt in the center of the side plate and any idea why mines leaking oil out of there when running? Do I need to tighten it? Or is it like an over flow?
i dont know if youll see this comment 4 years later, but i have a 110cc motor, i think the same, but i life in europe. so do you know any shop that sells to europe those parts? i love your videos!
Did you hone the cylinder? and is there a specific way the rings should fit on the piston? Does it matter? I followed this video while doing mine and for some reason my compression afterwards is like 50, it was 40 =/. Put new piston, and rings in the old cylinder, cleaned and reused the head, pulled it apart cleaned and re lapped values, set clearances to .005 and .007, timing on TDC and in line with the notch. Honestly im wondering if my compression checker is bad even its brand new... the bike feels way better than it did before the rebuild and stays running and idles great, it does smoke a bit when i first start it up however and it kinda smells like oil which is why i think the piston may have been done incorrectly. Thanks for sharing this awesome content. Was very helpful
To be honest most of the time I talk to people about this issue after they rebuild is a bad compression tester from harbor freight! Try looking up the ring order for a good picture but here is what you put in starting top to bottom: Compression Ring, Wiper Ring (this ring will have an angled edge that needs to be facing towards the bottom end), oil rings.
I picked up a Tao Tao kids quad with the 110cc engine. It was not running, the guy I bought it from changed the wiring harness. But now I'm not sure if it was supposed to be 2 pole or 6 pole stator. Is there a marking or something on the flywheel showing if the stator should be 2 or 6 to match it?
I love you videos and I have a kazuma falcon 110cc that I bought I couple months back with a no spark issue have replaced the stator and the wiring harness but still no spark and tips or ideas of how you could help ?
Thanks Corey! Make sure you have a good ground wire without corrosion. Check your kill switch with a ohms reader. If you still don't have spark there is a good chance your CDI box is bad.
hey just curious the engine stator cover cap is missing and you werent to worried about apraying paint into it. i have the same four wheeler it is missing that same cap an i havent let the kid ride because i was worried it would break the stator if anything got in there. is this just a part you ont really need
Can you put a 90 or 110 cylinder & piston on a 50cc engine? Is everything the same between these 50, 70, 90 and 110's besides the cylinder/piston bore size?
hey man i know this is an old video but was wondering if you could point me in the direction of some new head studs for my 125cc Chinese quad? i found on vmc but not sure if they are correct
Hey, been looking for a couple atvs for my daughter, unfortunately around here everyone wants an arm and a leg for something upside down in a ditch. Just picked up a couple 125 Taos for a good price that need work. An aircraft mechanic by trade and my own auto mechanic, but new to small engines, been following your videos for tips and tricks. Videos are awesome, they are simple and easy to follow, but very informative with lots of tips. One question, where did you get the bench mounted engine mount? It is much better than any other one that I've seen. Cheers!
Hello! I have a 125cc Tao Tao and it’s idling really high sounds like if I have the full throttle opened. I replaced the throttle cable, carb and the manifold thinking that was the issue because of an ir leak there but it still sounds like I have Throttle opened. Do you think it could be one of the head gaskets?
Does all the Chinese engines like the one you just rebuilt take the same size oil seals for the crank seal behind the stator I have one on my son's go-kart and it's dripping oil when he's riding it coming out of the cover where the stator is I assume it's the oil seal on the crank behind the stator but I'm not positive I haven't tore it apart yet
So, my Amazon rebuild kit didn’t come with any instructions and the rings weren’t clearly labeled at all, so I just took a shitty guess and installed the metallic colored one on top and the black one as the second ring. It runs, but it looks like you did it the other way around. Curious.
Brother I love your videos. everything you do is really knowledgeable and it helps a lot. I'm new to your Channel but have some real questions about my ATV can you help me out?
I bought a new wiring harness and did everything you did and the starter is working but I’m not getting any spark. Do you know what the problem could be?
@@PraskaBoysGarage No real difference. #75 main jet and the needle is in the third position from the top. All is stock minus the New Racing CDI box ignition coil, plug and cone air filter. Carb too small?
Hey man do you know the oem bore size for these Tao Tao 110 motors? I have a 110 db14 I’m looking for big bore kit just been trying find measurements in the oem vs the big bore kits I’ve found
You are correct. Also you can see it on the valve as well. My guess is while that valve was stuck open and I was checking compression it was slapping. Now that the motor is timed properly and the new valves are seated everything is all good! Good catch!
Is there anyway I can contact u personally I'm Workin on a 2013 taotao 110 and I'm having some trouble with it and would like to get ur feedback on it and show u what it's doin
Would you please share more of your wisdom...I went with Valvoline 10W-40 Full Synthetic. Got it running Tao Tao 125 cc Jeep go kart Automatic with reverse now experiencing high idle in neutral and I would say regular idle in gear. All parts are new. My. prayers 🙏 are keeping my sanity.🇨🇱🇨🇱😃 THANK YOU.
Hey Antonio! Those little Jeep go karts are awesome! We owned one for a few years and loved it! High Idle can be adjusted with your idle screw on the carb. Turn the idle screw counter clockwise and that should lower it. If it does not go down you might have a kink in your throttle cable line.
Awesome video! Not sure if my kids' go kart needs a rebuild or what. It runs fine for a couple miles then quickly loses power then shuts off. It would not start back up until the engine cools down completely. Any ideas?
Thanks! Might not be your engine but more likely a fuel or air flow problem. I would make sure your air filter is clean, fuels lines and filter are clean, and that you have good fuel flow to the carb.
Where are these specs? I've been tasked to get one running. Changed starter, simi tuned the new carb but found oil dripping from between the case halfs. So I need to see a tear down of the case.
Hi, is it possible to stand these engines up, sprocket at the bottom, head pointing up, If the carb was also rotated so it stayed in its original flat position? Would it still run
@@PraskaBoysGarage Awesome thanks, another question. Does it matter what wiring harness i buy because spares is very hars to come by here and if i can find ita extremely expensive like 50$
@@simeonerasmus I've purchased them from many different sellers and haven't seen a big difference. Buy Amazon if you can, they have a great return policy that most other sellers don't offer.
@@PraskaBoysGarage thank you for that info, one more thing. Do i need to ask the people I'm buying from for lets say the cdi i need a cdi for a nolimit atv or can i just tell them i need one for a 250cc atv? Does the above apply to all the other components like the brakes?
I have to ask what that red swivel table mounted stand is called exactly and where do I buy one because that would make life so much easier for working on these small motors.
Thanks for watching! I purchased the stand off eBay back in 2018. I am working with a company to help me make my own to sell on my website since it's been so popular on the channel! They should be available for purchase in March, and I will have a video on the channel going over them.
Thanks for the videos- new subscriber. I’ve owned and repaired GY6 150cc’s but I am struggling with a 2015 Coolster 125cc Gokart (6125). Typically I just download a parts diagram and engine service manual then make my way through it. I have scoured the web with no luck and even spoke to Coolster who claims they don’t even have a parts diagram for it WTH? If you or any subscribers have any resources or can point me in the right direction I would greatly appreciate it. So many questions and no way to find the answers. Your video has been the most helpful.
Gday mate I'm restoring a quad bike and I'm currently working on the engine. There's a lot of sand inside of it as the carbi, intake manifold and other pieces were missing. Anyway I was wondering what you used to clean the sludge out of the bottom. And what would you recommend I use to clean the engine out
I just got this used Chinese 4wheeler and when i turn jt on, let it warm up but when my son pushes the gas it looks like is not getting power and will turn off. Any advice? I was going to drain the gas tank and put non ethanol and some seafom, change the oil and the gas filter.
Nice video! I also like the end with your little guy enjoying the ride. My boy turned 18 and I always remember how much fun we had together. Get all the hugs you can brother...you'll blink your eyes and he'll be 18.
I know what you mean! I have 3 boys and a little girl. They already have grown up to fast!
Thanks for being a Great dad, Respect
We need more people like you. DIY is the future! ☆Choice☆
Thanks Trent, much appreciated!
Thank you so much for your videos and knowledge! I have completely restored 2 sunl 110cc quads from ground up watching your videos over and over. My daughter and I thank you :)
Love that man! I appreciate you watching and Im glad I was able to help!
U keep killing it man! Never skip or fast forward because ur videos are that good!
Mario's Rocking Kitchen Thank you so much! I really appreciate that and also it helps the RUclips algorithm so that’s a huge help for the channel!
Nice job. I just rebuilt a honda xr70 and put training wheels on for my 3 year old son. He rides it like a champ
3 years old!!! Dang, that's a lot of bike for 3. I just took my 3 year old down to power wheels after his first real crash on a 50cc atv!
@@PraskaBoysGarage I got it governed down so he can't go to fast in 1st gear. The training wheels work awesome and I can't even pull the bike over on its side. He has a 110cc xpro atv and he rides it like he stole it.
@@PraskaBoysGarage also he watches your videos with me. I have have learned a lot and have now been working on several china quads I got from junkyard. Most have been bad wiring issues. Motors all ran with a little love 😆😆😆
@@geneperrego5107 Love it man! Appreciate the support and good luck on your future projects!
Can i get the 125 cc cylinder kit from same supplier ? I got a 125 engine thats locked up and would like to rebuild it and swap it out for my 110 . Any help would be great , and keep up the great vids , i know alot of people put down the china atv but they seem to forget the motors are honda clones and honda has been doing it right for a long time this is why the motors are used in the china buggies as well as atvs , sure the chassy parts can be crap but if you take care of the motors they can last a long time ..
Great content! You have helped me with maintaining our 2007 ATA-110/B1. After watching your videos, I'll be repairing the small oil leak our's has developed.
Love to hear it! Thanks for watching!
Great channel! I am rebuilding 2 tao tao 110b ATVs. Your content is extremely helpful!
I’m impressed. That was beautiful
Love what this guys doing👍. What a stand up individual and thorough work/hobby
Much appreciated, thanks!
Well done sir, well done!!! You make it easy working on the atv’s. Great teacher!!
My 7y/o is wanting a Quad bad. I came across your channel yesterday and has me confident in these 110 clones. Picking a new one up tomorrow and gonna talk my father in law into digging out the one he picked up years ago (wasn't running) for my oldest but he never did anything with it.
Glad you did! Thanks for watching, and good luck on your project! Let me know if you have any questions.
@@PraskaBoysGarageif there is a little oil on the back of the spark plug and it smells like gas, am I going to have to rebuild the whole motor? My second question is where did you get your red motor stand?
Awesome job brother!!! Can’t wait to see the bike all put together, I can see and appreciate the hrs put into her !
Doing a rebuild that’s for the family you always want to do it right !!!
Appreciate the support! Working on part 5 right now ;)
@@PraskaBoysGarage wya though??
Where u get engine stand
It's entertaining and educating to watch the process of restoration with you, thanks
Thanks, glad you enjoyed it!
Hi great videos, love your humour and your perfect workshop! Lol can I ask where did you get your engine stand on the bench. Thanks keep it up. Empo
me too.
Need to bring the content out quicker man love the vids
Thanks man, that's what I'm working towards! Balance between work, family and the shop!
Completely understand bro keep up the good work
@@jakepurcell1063 Thank You!
@@PraskaBoysGarage how do you time that chain? Or does it just have to match up the screw holes
@@PraskaBoysGarage I just took mine apart and idk what way I put on the chain on the sprocket
I love that you have fun while doing this. That’s the life, man!
I wouldn't have it any other way! Thanks for watching!
@@PraskaBoysGarage I have a 125cc Chinese pit bike engine that I’m hoping this video will help me figure out which seal is bad. Somehow the tube coming off the crank case breather got plugged so pressure built up and now even though it’s unplugged oil is leaking from the engine case 😬
EDIT: when I say “somehow”, I mean, “I plugged it because I am a dummy and was closing off emission bits since I changed the carburetor!” OOps!
“Alexa, please send me more gaskets...”
Nice, Following you from Puerto Rico i just got 2 abandoned atvs, 110cc and a 125cc keep up the content
That's awesome! Good luck on your projects and thanks for watching!
How much torque do you apply to the nuts holding the cylinder head?
This was a pleasant surprise. I have been waiting for this video. Love your videos dude!
I am rebuilding a 125 Chinese engine right now. I was about done and the plastic plug that covers the timing mark broke in the case cover. When removing it, the pieces went into the cover. Had to remove it and of course the gasket tore. Now waiting on parts...again!!
Been there man! Honestly I completely forgot to order my chrome covers but I wasn't going to make that the reason this video got delayed any longer! Like always thanks for watching Tom!
Thanks to share that! Well explained and it's nice to see someone enjoying the results of his work ;) Keep It Up!
Wonderful video! Thanks so much
Great video. It's looking great. Loved the family segment at the end.
Thank You! Editing the ending has me more excited than anything else these last few videos. Will definitely keep it up for all future videos to come!
I’m a Big fan, I love your videos and your content absolutely awesome and has helped me a lot with my own projects. The only thing I want to ask is can you do a video on the necessary tools needed to fix these types of engines.
Awesome! Thanks man! That is a great idea. I want to add "How To" videos in with my builds and I think that would be a big help to some people.
Praska Boy's Garage Thank you for the reply, and your fans ask for another upload its been well over due ..✌️
i have a couple of 110 pit bikes ready to get them going really like what you did and will help me so much ..... just wishh i had your set up .....
any videos of it ...
Thanks for the great video I have gained quite a knowledge in order to rebuild a atv for my kids I’m stuck at starting the unit it seems to take a while to start haven’t done a compression test yet I will get a new plug and perform a comp test.
I just discovered one of the exhaust manifold bolts broken would that cause a compression issue to turn it over
It’s a 110 cc Tao Tao engine any info would be helpful.
Thanks
The exhaust bolt wont cause a loss of compression.
I’m working on a Tao Tao 110 and was wondering how do you connect the front brake lines to the actual front brake on the bars one has two little spike things sticking out and the other has two female ends but they don’t fit I think I might have ordered it wrong. And for your rear brakes do you replace them or try to fix I’m trying to fix because they r in pretty good shape, but they just not working like there not stopping wondering if u have any tips
Have you checked the brake fluid and bled any air out of the line?
In this build I am completely replacing the rear breaks with a complete disk brake kit that's already filled with fluid. However it is cheaper to fix the brakes you have and I agree with Max. Check your fluid, might require the brakes to be bleed again. If you can shoot me an email with pictures of the front brakes. Id be happy to take a look at it.
God bless bro! There is not alot of videos and manuals on these engines. I attempted to open one up and figure out why it would pop out of gear. A r-n-d 125cc which I believe is very similar? Well the engines were cheaper back in 2015 so after a month of the engine just in parts on my work bench, I opted to buy a new engine instead since the rebuild kit/ gaskets were half the price of the new engine. I went to a 3 speed semiautomatic with reverse. Now years later I have 6 atvs. For the family to ride around our property. On the 3 speed, I have 2 atvs that will pop out of 2nd gear randomly. Do you have a clue what this might be? Any info would be greatly appreciated..
Well that engine is super clean it will last long now
Mechanic These little things are tanks! Take care of them and they will take care of you!
Hey BJ, what oil dip stick do you use your the Taotao 110cc ? Looking on amazon, but having trouble finding one.
RUclips deletes comments with links, so I've added it to the video description for you. Hope that helps!
Awesome, thanks!
So I found a four wheeler on the side of the road and I got it to turn over but never got it to crank so I’m buying a whole new wiring harness like you did and to see if it’ll run well. It was submerged in the water, but it still turned over will it still crank
Hi, where do you find all you torque specs for this engine, btw great vid!
Nice work that was really awesome enjoyed the vid was proffional good job
Glad you enjoyed it, thank you!
I'm your #1 fan
I know you are! I appreciate you!
Awesome videos man, I have a question do you know of a website where I can purchase parst for a can am ds 70cc
Great series.
Thanks brother!
you are indeed genius man i wish you can train me how to restore the motor engine
Thank you, but I am no genius! Have you watched my recent video on how to rebuild the head? ruclips.net/video/dDhGnXz5yKI/видео.html
Hey i’m replacing the same side of my crank case at 6:57. What torque did you use when tightening the bolts? And was that red paste silicon? Thank you!!
Great Videos. Ty any thoughts on the big bore kits? Are they worth it if I need to rebuild the top end anyway?
Love the diesel convo 😂😂 caught red handed
We all have our fail moments! Editing gives the power for content creators to eliminate those moments, but I feel it's important to share mine every now and again :)
Thanks dude I have ripped apart 2ts but never chine 4 strokes
You bet man, glad the video helped!
I get so excited every time you upload, because it's so good
Thank you! Always happy to hear from you brother!
I have 2 50cc kazuma quads that just never seem to want to fire up like they should, I'm about to swap alllllll the heads!
Alright man, good luck on the projects! Let me know if you have any questions!
Is the engine stand home made or where did you purchase it? Good video!
I also need to know where he got this stand from.
At 6:18 you took the side cover you took off to replace gasket. So what's the bolt in the center of the side plate and any idea why mines leaking oil out of there when running? Do I need to tighten it? Or is it like an over flow?
Good job dear would you please share the details information of how’s that’s engine work including gear shifting
Thanks, I will be doing a bottom end rebuild soon this fall and will be posting it on the channel.
i dont know if youll see this comment 4 years later, but i have a 110cc motor, i think the same, but i life in europe. so do you know any shop that sells to europe those parts? i love your videos!
very helpful
Glad it helped!
Did you hone the cylinder? and is there a specific way the rings should fit on the piston? Does it matter?
I followed this video while doing mine and for some reason my compression afterwards is like 50, it was 40 =/.
Put new piston, and rings in the old cylinder, cleaned and reused the head, pulled it apart cleaned and re lapped values, set clearances to .005 and .007, timing on TDC and in line with the notch. Honestly im wondering if my compression checker is bad even its brand new... the bike feels way better than it did before the rebuild and stays running and idles great, it does smoke a bit when i first start it up however and it kinda smells like oil which is why i think the piston may have been done incorrectly. Thanks for sharing this awesome content. Was very helpful
To be honest most of the time I talk to people about this issue after they rebuild is a bad compression tester from harbor freight! Try looking up the ring order for a good picture but here is what you put in starting top to bottom: Compression Ring, Wiper Ring (this ring will have an angled edge that needs to be facing towards the bottom end), oil rings.
May I ask where you bought the top end at? I’m afraid to buy one off the wrong website
I picked up a Tao Tao kids quad with the 110cc engine. It was not running, the guy I bought it from changed the wiring harness. But now I'm not sure if it was supposed to be 2 pole or 6 pole stator. Is there a marking or something on the flywheel showing if the stator should be 2 or 6 to match it?
I love you videos and I have a kazuma falcon 110cc that I bought I couple months back with a no spark issue have replaced the stator and the wiring harness but still no spark and tips or ideas of how you could help ?
Thanks Corey! Make sure you have a good ground wire without corrosion. Check your kill switch with a ohms reader. If you still don't have spark there is a good chance your CDI box is bad.
hey just curious the engine stator cover cap is missing and you werent to worried about apraying paint into it. i have the same four wheeler it is missing that same cap an i havent let the kid ride because i was worried it would break the stator if anything got in there. is this just a part you ont really need
Any links of re build kits and new gaskets and such?
Can you put a 90 or 110 cylinder & piston on a 50cc engine? Is everything the same between these 50, 70, 90 and 110's besides the cylinder/piston bore size?
AWESOME video! Can't wait to see more!!
Glad you liked it! Thanks for watching!
hey man i know this is an old video but was wondering if you could point me in the direction of some new head studs for my 125cc Chinese quad? i found on vmc but not sure if they are correct
Nice I'm working on a couple of 110 'sfor my little guys...
What brand of hight temp paint went on the block?
Does it work the same with a dirt bike??? Wondering because i'm starting a new project with my freind and we need to rebuild the actual motor.....
Your work, we add, keep it up
What is the plug for on the crank side half almost looks like the oil drain plug? It’s a bit smaller maybe a 15mm vs. 17mm.
New subscriber!! Hello from Spain
Hey, been looking for a couple atvs for my daughter, unfortunately around here everyone wants an arm and a leg for something upside down in a ditch. Just picked up a couple 125 Taos for a good price that need work. An aircraft mechanic by trade and my own auto mechanic, but new to small engines, been following your videos for tips and tricks. Videos are awesome, they are simple and easy to follow, but very informative with lots of tips. One question, where did you get the bench mounted engine mount? It is much better than any other one that I've seen.
Cheers!
I am also interesting in that stand.
Can you explain how to adjust the screw and locking nut on the clutch cover?
Are u suing break cleaner to clean the inside of the block?
Hello! I have a 125cc Tao Tao and it’s idling really high sounds like if I have the full throttle opened. I replaced the throttle cable, carb and the manifold thinking that was the issue because of an ir leak there but it still sounds like I have Throttle opened. Do you think it could be one of the head gaskets?
Yeah!!!! I finally got around to watching your video!!! Great video!!!
Yay! Thank you Jacob!
How can I get to you with my ATV. or consult you on how to repair it. The work is beautiful.
Thank you! You can also send me an email to PraskaBoysGarage@gmail.com
Restauring a street legal 160cc atm :D, cool video man
Thanks! Good luck on your project!
Where do you buy parts for this engine? Thank you
Does all the Chinese engines like the one you just rebuilt take the same size oil seals for the crank seal behind the stator I have one on my son's go-kart and it's dripping oil when he's riding it coming out of the cover where the stator is I assume it's the oil seal on the crank behind the stator but I'm not positive I haven't tore it apart yet
So, my Amazon rebuild kit didn’t come with any instructions and the rings weren’t clearly labeled at all, so I just took a shitty guess and installed the metallic colored one on top and the black one as the second ring. It runs, but it looks like you did it the other way around. Curious.
Brother I love your videos. everything you do is really knowledgeable and it helps a lot. I'm new to your Channel but have some real questions about my ATV can you help me out?
I bought a new wiring harness and did everything you did and the starter is working but I’m not getting any spark. Do you know what the problem could be?
Nice to see another new one. Thanks BJ!
You bet! Thanks for watching!
What do you use to clean engine parts?
Double checked no kink throttle cable. Break in period, your thoughts please. Thank you for you channel, truly appreciate it.👍🇺🇸🇨🇱
What about the carb idle screw?
@@PraskaBoysGarage No real difference. #75 main jet and the needle is in the third position from the top. All is stock minus the New Racing CDI box ignition coil, plug and cone air filter. Carb too small?
Hey man do you know the oem bore size for these Tao Tao 110 motors? I have a 110 db14 I’m looking for big bore kit just been trying find measurements in the oem vs the big bore kits I’ve found
I think I saw the valve impact mark on the piston when you put it up to the camera.
You are correct. Also you can see it on the valve as well. My guess is while that valve was stuck open and I was checking compression it was slapping. Now that the motor is timed properly and the new valves are seated everything is all good! Good catch!
I really love your videos what tool are you using to ajust the valve please so many online thanks
Feeler Gauge: amzn.to/33ULySi I will add it to the video description! Sorry I missed that one!
Is there anyway I can contact u personally I'm Workin on a 2013 taotao 110 and I'm having some trouble with it and would like to get ur feedback on it and show u what it's doin
Bro still hasn't gotten a response.
Would you please share more of your wisdom...I went with Valvoline 10W-40 Full Synthetic. Got it running Tao Tao 125 cc Jeep go kart Automatic with reverse now experiencing high idle in neutral and I would say regular idle in gear. All parts are new. My. prayers 🙏 are keeping my sanity.🇨🇱🇨🇱😃 THANK YOU.
Hey Antonio! Those little Jeep go karts are awesome! We owned one for a few years and loved it! High Idle can be adjusted with your idle screw on the carb. Turn the idle screw counter clockwise and that should lower it. If it does not go down you might have a kink in your throttle cable line.
Awesome video! Not sure if my kids' go kart needs a rebuild or what. It runs fine for a couple miles then quickly loses power then shuts off. It would not start back up until the engine cools down completely. Any ideas?
Thanks! Might not be your engine but more likely a fuel or air flow problem. I would make sure your air filter is clean, fuels lines and filter are clean, and that you have good fuel flow to the carb.
Where are these specs? I've been tasked to get one running. Changed starter, simi tuned the new carb but found oil dripping from between the case halfs. So I need to see a tear down of the case.
What is your swivel engine mount? I’d like to get one like that.
Wow quality content !
Thank you!
Where did you get your engine holding fixture.
What was the bore on these stock motors looking for a big bore kit
Hey brother, where can I buy that engine stand you have on the work bench?
Hi, is it possible to stand these engines up, sprocket at the bottom, head pointing up, If the carb was also rotated so it stayed in its original flat position? Would it still run
Hey man. Amazing videos, watching from South Africa.
Quick question.....
What size battery should i use for 250cc Chinese ATV?
South Africa! That's awesome! If the atv is someone your drive routinely then invest in a lithium for sure!
@@PraskaBoysGarage Awesome thanks, another question.
Does it matter what wiring harness i buy because spares is very hars to come by here and if i can find ita extremely expensive like 50$
@@simeonerasmus I've purchased them from many different sellers and haven't seen a big difference. Buy Amazon if you can, they have a great return policy that most other sellers don't offer.
@@PraskaBoysGarage thank you for that info, one more thing.
Do i need to ask the people I'm buying from for lets say the cdi i need a cdi for a nolimit atv or can i just tell them i need one for a 250cc atv? Does the above apply to all the other components like the brakes?
Love his videos
Thank you so much!
@@PraskaBoysGarage no problem bud hoping to see more ❤
I have to ask what that red swivel table mounted stand is called exactly and where do I buy one because that would make life so much easier for working on these small motors.
Thanks for watching! I purchased the stand off eBay back in 2018. I am working with a company to help me make my own to sell on my website since it's been so popular on the channel! They should be available for purchase in March, and I will have a video on the channel going over them.
Thanks for the videos- new subscriber. I’ve owned and repaired GY6 150cc’s but I am struggling with a 2015 Coolster 125cc Gokart (6125). Typically I just download a parts diagram and engine service manual then make my way through it. I have scoured the web with no luck and even spoke to Coolster who claims they don’t even have a parts diagram for it WTH? If you or any subscribers have any resources or can point me in the right direction I would greatly appreciate it. So many questions and no way to find the answers. Your video has been the most helpful.
Gday mate I'm restoring a quad bike and I'm currently working on the engine. There's a lot of sand inside of it as the carbi, intake manifold and other pieces were missing. Anyway I was wondering what you used to clean the sludge out of the bottom. And what would you recommend I use to clean the engine out
When spraying it out I just use regular carb cleaner. If your not splitting the case I use diesel fuel to flush out the rest.
Did u make the engine stand ?
I just got this used Chinese 4wheeler and when i turn jt on, let it warm up but when my son pushes the gas it looks like is not getting power and will turn off. Any advice? I was going to drain the gas tank and put non ethanol and some seafom, change the oil and the gas filter.
I know this is a old video.i have a 125cc fully automatic atv with DNR what kind of clutch do i have is it adjustable
That engine stand, where do you get one like that?