Neat build - pilot figure is a nice touch. Finished one of these about six weeks ago and enjoyed every minute of the build. Looking forward to your next one. Best from NZ.
Excellent build, just love the tip on getting right orientation of wheels and the clear stand for the pilot is pure genius. Well done and best wishes Vic.
Nice Mirage! I always like Mirages, and thnx for the tip with the wheels, I keep struggling with aligning the wheels but this is a very smart solution!
Just found your channel and subscribed. Always loved the Mirage and since seeing your video it now is on my build list. Real cool aircraft, nice job with it as well.
Trudno powiedzieć. Ja jako dziecko zaczynałem od "Małych Modelarzy" i wyrosłem. No ale jest dużo osób które wolą takie modelarstwo i całe szczęście ;) Jak coś daje frajdę to jest dobre.
hi. If possible I have a question, it seems that the paint is hard on you and it doesn't stick to the airbrush needle. that you use for it, it dries in seconds after firing the airbrush and I have to constantly clean it with solvent.
@@Big-Modeller Yes, I used the thinner of the same brand of paint but, I even added a liquid specialized in not hardening fast from the same brand. but I can't make it last as long as it seems to last you. I am very bad at handling the airbrush in that sense. although I recognize that with what you say with tamiya paintings, that works better than with vallejo, in my experience. thanks a lot
Is There a chance you could do a review of the Kenetic 1/48 Swiss Mirage IIIC/RS Kit. I'm wanting to buy and build one. But I can't find any review's on one.
@@Big-Modeller Metalowego ja też składam, ale czekam na plastikowego ponieważ przymierzam się do sklejenia plastikowego i nie ukrywam, że lubię sobie podglądnąć wtedy Twoją pracę :)
@@Big-Modeller U mnie czeka specjalna półeczka w salonie :) ale znając życie trzeba będzie go przenieść ponieważ najmłodszy syn będzie chciał się nim „bawić” :)
@@Big-Modeller Je dis ça car je suis en train de monter ce kit. C'est d'ailleurs ma première boite de chez "éduard" ! Cela pour dire que je sais apprécier la qualité de votre réalisation. J'ai choisi la version Djibouti et on arrive à quelque chose d'assez fin et de détaillé pour un 1/48. Cela dit, même si tout est finement moulé et détaillé, ce kit comporte quelques inepties de conception, non ?
Bien sûr, ce modèle présente des défauts - comme presque tous les modèles. Il faut mettre un peu de mastic autour des entrées d'air Cependant, pour un prix aussi bas, nous obtenons un excellent modèle.
@@Big-Modeller Tout à fait, c'est ce que j'ai inclus à mon commentaire d'ailleurs. J'ai été simplement surpris, voire choqué, de la manière dont le concepteur a par exemple intégré les trains d’atterrissage ou les pièces transparentes par exemple. On en parle, c'est tout.
Great build, Sir! 👍🏻 I also built this one too, but it fought me every inch of the way...even fuselage was warped and the gaps and poor fit was just awful. NOT Eduard's best kit!
Lovely kit for a 2004 tooling. I still prefer the Hobby Boss version; the moulding is that much crisper. Great build, too .... but the "music" is enough to drive one to suicide!
I was just disappointed with the Hobby Boss Skyhawk detail. Besides, I didn't plan to buy it, I just liked the boxart in the modelling shop ;) As for the music... some people write to me that they watch my movies only to hear the music ;)
I knew it! You're cheating. Someone was helping you through the process. Denial is futile. I saw it at 11:24 Nice build. Gear alignment solution is brilliant.
I'm so happy when a Big Modeller video arrives in my notifications.
I'm happy too :)
Neat build - pilot figure is a nice touch. Finished one of these about six weeks ago and enjoyed every minute of the build. Looking forward to your next one.
Best from NZ.
Thanks mate, best wishes :)
Excellent build, just love the tip on getting right orientation of wheels and the clear stand for the pilot is pure genius. Well done and best wishes Vic.
Thanks for the kind words, mate :)
I enjoyed the build very much, never build one so ive just added it to my list.
It's quite a nice kit, it'll give you fun :)
@@Big-Modeller a mi también me encanta el aeromodelismo ✈️🇨🇱👍
Magnifique réalisation pour ce Mirage IIIc , quel talent !!!!
Félicitation MONSIEUR !!!👌👌👌👌
Merci beaucoup :)
That’s a really nice job there.
Thanks :)
Beautiful build!
Thanks :)
Nice Mirage! I always like Mirages, and thnx for the tip with the wheels, I keep struggling with aligning the wheels but this is a very smart solution!
My friend showed me this tip. Simple yet effective :)
Very nice build!!!
Thanks :)
Worth the wait. Long time, no see, Mr. B. Excellent build.
Thanks :)
I’ve built this kit twice now it fit. Extremely well
Twice the same set? Not my style ;)
An enjoyable watch and a terrific result....great paint scheme so different from the usual grey for jet aircraft. Congratulations!
Back in the day painting pattern designers had way more fantasy ;)
Pięknie wyszło. Te francuskie srebre samoloty wyglądają bardzo pięknie. ;) Powodzenia dalej! ;)
Dzięki :)
Nice job Sir! Greetings from Chile
Thanks :) Greetings from Poland.
Wreszcie :). Brawo, oglądam.
Miłego seansu :)
Excelente video desde 🇨🇱✈️👍gran trabajo ✈️👍me encanta el aeromodelismo ✈️🇨🇱👍
Thanks mate :)
Cześć świetna robota Pozdrawiam czekam na kolejne projekty :)
Dzięki :)
Great build sir! One of my all time favorite jets
Mine too :) Thanks
excellent!!
Thanks :)
I like your stuff. Great video content!
:)
Very Nice Work !
Thanks :)
Just found your channel and subscribed. Always loved the Mirage and since seeing your video it now is on my build list. Real cool aircraft, nice job with it as well.
Thanks mate :) I'm glad my movie inspired you ;)
Super model. Ja teraz z kartonem się bawię
To znaczy? Bawisz się pudełkiem po modelu jak kot? ;)
@@Big-Modeller bawię się modelem kartonowym :) w sensie sklejam jak masochista
Nic się nie martw, z tego się wyrasta ;)
@@Big-Modeller z masochizmu czy z modelarstwa kartonowego?
Trudno powiedzieć. Ja jako dziecko zaczynałem od "Małych Modelarzy" i wyrosłem. No ale jest dużo osób które wolą takie modelarstwo i całe szczęście ;)
Jak coś daje frajdę to jest dobre.
piękna praca ! Gratulacje!
Dzięki :)
love from turkey
:)
And New Zealand!
And from Poland to both of you :)
@@Big-Modeller as you may have guessed, my father was Polish.
He was quite a traveller ;)
Very nice! What did you clean the wash off with? Enamal thinner?
I use a white spirit in most cases.
Great... Decals and wash any transparent color?
Do you mean wash? It's a normal Tamiya dark grey panel liner.
Nice model jet looking good.🖌️🖌️🇫🇷🇮🇱
Thanks :)
hi. If possible I have a question, it seems that the paint is hard on you and it doesn't stick to the airbrush needle.
that you use for it, it dries in seconds after firing the airbrush and I have to constantly clean it with solvent.
A proper thinner is a key. I recommend choosing one dedicated to the paint you're using.
@@Big-Modeller Yes, I used the thinner of the same brand of paint but, I even added a liquid specialized in not hardening fast from the same brand. but I can't make it last as long as it seems to last you.
I am very bad at handling the airbrush in that sense.
although I recognize that with what you say with tamiya paintings, that works better than with vallejo, in my experience.
thanks a lot
I wish I could give you more applicable advice, but it's very hard to tell something without really seeing the issue :(
I liked the build as well, since ce I too love ty see Mirage line of jets. But I,m also curious about you're music choice very nice
I'm glad you like the model :)
Is There a chance you could do a review of the Kenetic 1/48 Swiss Mirage IIIC/RS Kit. I'm wanting to buy and build one. But I can't find any review's on one.
Unfortunately, I don't have this set :(
Nareszcie!!!! Kiedy skończysz MiGusia 29? Ale tego z plastiku. Pozdrawiam
Mam nadzieję, że szybciej skończę tego z plastiku niż metalowego ;)
@@Big-Modeller Metalowego ja też składam, ale czekam na plastikowego ponieważ przymierzam się do sklejenia plastikowego i nie ukrywam, że lubię sobie podglądnąć wtedy Twoją pracę :)
Mnie przeraża ta wielka skala. Nie mam go nawet gdzie postawić jak go skończę ;)
@@Big-Modeller U mnie czeka specjalna półeczka w salonie :) ale znając życie trzeba będzie go przenieść ponieważ najmłodszy syn będzie chciał się nim „bawić” :)
Ja mam gablotkę, ale ten samolot się w nią nie zmieści ;)
Que mettez-vous sur le coton tige après le Panel Line pour nettoyer ???
Merci de me répondre
GILLES
Il s'agit (très probablement) d'un white spirit
Très belle réalisation ! Dommage que vous ne mettiez pas l'accent sur les nombreux défauts et imperfections de conception de cette jolie maquette.
Merci :) Je préfère me concentrer sur les avantages et non sur les inconvénients ;)
@@Big-Modeller Je dis ça car je suis en train de monter ce kit. C'est d'ailleurs ma première boite de chez "éduard" ! Cela pour dire que je sais apprécier la qualité de votre réalisation. J'ai choisi la version Djibouti et on arrive à quelque chose d'assez fin et de détaillé pour un 1/48. Cela dit, même si tout est finement moulé et détaillé, ce kit comporte quelques inepties de conception, non ?
Bien sûr, ce modèle présente des défauts - comme presque tous les modèles.
Il faut mettre un peu de mastic autour des entrées d'air
Cependant, pour un prix aussi bas, nous obtenons un excellent modèle.
@@Big-Modeller Tout à fait, c'est ce que j'ai inclus à mon commentaire d'ailleurs. J'ai été simplement surpris, voire choqué, de la manière dont le concepteur a par exemple intégré les trains d’atterrissage ou les pièces transparentes par exemple. On en parle, c'est tout.
Gostaria de saber que trilha sonora você usou no vídeo.
It's "Pipe Choir - Adam are you free?"
Great build, Sir! 👍🏻 I also built this one too, but it fought me every inch of the way...even fuselage was warped and the gaps and poor fit was just awful. NOT Eduard's best kit!
I had some sanding too. But it's not that bad.
My fuselage was bent like a banana! 😫
Mine was ok. It's good to write an email to the producer when there's something wrong with the model.
Very good!
Please...1/48 Kinetic Mirage IIIE
It's not entirely impossible ;)
It seems that Eduard's Mirage III is engineered better than Kinetic's one.
I can't confirm that since I didn't do the latter one.
What’s music???
It's "Pipe Choir - Adam are you free?"
Lovely kit for a 2004 tooling. I still prefer the Hobby Boss version; the moulding is that much crisper. Great build, too .... but the "music" is enough to drive one to suicide!
I was just disappointed with the Hobby Boss Skyhawk detail. Besides, I didn't plan to buy it, I just liked the boxart in the modelling shop ;)
As for the music... some people write to me that they watch my movies only to hear the music ;)
Single engine jet aircraft I like mirages
I like them too :)
I knew it! You're cheating. Someone was helping you through the process. Denial is futile. I saw it at 11:24
Nice build. Gear alignment solution is brilliant.
I was so focused on modelling I didn't see this little alien from outer space ;)
Czyli prawidłowo odgadnąłem przednie koło w jednym z postów ;p
Ale przypadkowo więc się nie liczy ;)
Jakie przypadkowo 😬 godzinę studiowałem powojenne podwozia lotnicze ;p
Dobra dobra, sam się przyznałeś, że nazwę wpisała autokorekta w telefonie ;)
@@Big-Modeller wersję a nie cała nazwę 😂
Ok, niech będzie, zasłużyłeś na nagrodę pocieszenia ;)
people aren't using enough glue...
What do you mean mate? My models don't fall apart.