How To Change The Oil, Air & Fuel Filters In A Peugeot 3008 - DIY
HTML-код
- Опубликовано: 4 окт 2024
- In this video I show a step by step guide on how to carry out a Major Service in a 2012 Peugeot 3008 Diesel, I replace the oil filter, fuel filter, air filter & engine oil.
If I helped ya out and you would like to buy me a drink ko-fi.com/gera...
Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
Tool options that I recommend and use. www.amazon.co....
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
Can’t believe how difficult Peugeot have made a simple job, good video 👍
There is a little priming pump on the top of the fuel filter. You can prime the filter by pumping with hand about a minut. Pump is the big knob between hoses with white and green clip.
This is my 30th year in the trade and much respect from me for an excellent tutorial, you saved me a lot of time. 👍
Much appreciated coming from another member of the trade 👍 👍 👍
Can I just say if I may ! There is a priming button on the top of the housing ! You touched as you said there wasn’t 👍🏻, it is an easy job without removing the wipers and plastic section , also leave the pipe on the turbo itself :) .
Thanx for an excelent tutorial, even if you have a lot of experiance with mekanics it saves a lot of time and extra work if you can see someone do it proper before going at it yourself without a clue. This is especially true with all panels and stuff that is so easy to damage if you don´t know how it is meant to be done.
I thoroughly enjoyed this great video. It pains me that they've had to make easy work so complicated
Thank you
Thanks for the video mate I just wanted to clarify how the oil filter locator pin goes in I'm all sorted now thanks.
I have just finished changing the diesel filter on my 2013 3008 and can say that the gismo being described does indeed prime the filter
Thanks for your input Colin, I since found that have seized/in operational primers. I am not sure why this. They were not on a 3008 but same type filter system.
Don't replace the oil drain plug until you've removed the oil filter as the filter retains oil until removed and will dump 2-300ml of old oil into the sump
Good guide thanks. Also if you switch ignition on and press the accelerator pedal down 5-10 times before trying to start the engine, it will run the fuel lifter pump again for 20s or so
Are you talking about diesel? I have just changed the fuel filter and the car won't start!
what a great video for an absolute dronk of a car. thanks very much!
Clear concise professional instruction - thanks
Good job friend , love peugeot i have 2008 bluehdi ( 2018 ) and 406 hdi ( 2003 ) .
Thanks Antonio
At the top of the fuel filter housing there is a Black push Button this is a hand fuel pump no need to kill the car bartery use it befor start the engine !
And any chance you could do a tutorial on how to replace the hybrid battery thats in the boot area?
I have a 2011 Peugeot 3008 diesel, where do you put the power stealing fluid or is it a sealed unit and you don’t need to top it up, I’m not sure ??
Good video
Does it work for a peugeot 3008 diesal hybrid4 2014?
What's the required type of oil ?
Fantastic video,very informative and easy to understand,good luck
Thank you Pat
Nice video thanks 🙌
wow so much work to put new stuff in. How much would a garage charged?. i was going to try D.I.Y. But after seeing the work what you did lol Ive changed my mind, thanks for sharing your time and video. :)
This was really useful thank you.
Thanks mate.. awesome video 👏👏👏👏great stuff🤙
I got to 2:38, to remove the plastic panel to get more access, but it seems stuck to the glass and I'm afraid it might break the seal between the windscreen and the panel. Peugeot 5008.
Thank you!
Have a nice day . thanks .
You too Nabil
Hi we are having so much trouble finding the correct oil cap for this very same car. Even head office at main dealers can't get us the correct cap, do you possibly have a picture of this oil cap? Watched the video but could just not quiet catch the cap in it, help!
Absolute gem thank you so much🍀
An excellent tutorial, well done.
Thanks David
Hi mate. can ask what's the torx size to open the fuel filter? thanks
On psa vehicles that housing does have a primer although they often need freeing off. On Ford vehicles with this engine theres only 2 pipes and no primer.
The plug at the back of the fuel filter will not unclip. Any tips how to get the plug off. Driving me mad
Do i have to remove all the panels and wiper arms if im just doing the airfilter?
Hi..very helpfull video..just quick question..I want to check the auto oil level of my automatic tramsmission 3008..2013 model, but cannot find anything on it...would appreciate any help here..many thanks!
Hi Ger... just to let you know that is the priming button @ 7:20 in this video it’s in between the two grey fuel connections the black button,, hope this helps.
No it is not a primer, it is a solid black plastic piece but not a primer, it is like this in many of these type fuel filters. Easy to get confused if not used of them and it certainly does look like it could have being one.
Hope this helps
Gerard Burke I serviced 2012 Citroen C4 1.6 dsl a few months ago and that was how i bled it by priming that button i never thought it was there i thought it was part of the filter housing...it was a Citroen mechanic that gave me the tip when I bought the filter in the main dealer.
Thank you for your reply again, here is a link of another fuel filter I done, this one is on a Peugeot partner/Citroen berlingo
ruclips.net/video/zlndzsu5XHo/видео.html
In this video you can see me use the primer you are speaking of, I am familiar with these types of filters.
I have also linked this other video with a Citroen DS3 that had the same type check out from @10;25 onwards for the fuel filter
ruclips.net/video/BdJjhegpNRE/видео.html
In any case, I tried that way on this also but it was completely solid and no priming action was possible, this is not the first time this has happened where I came across a solid type with no primer (link above) BUT I will check the housing out of interest next time the vehicle is in, maybe it is a rock solid jammed primer, I did not look on the underside when I had it out to confirm.
All good info and that can help people so thumbs up for taking the time to comment. I hope you have enjoyed some videos on my channel.
Gerard Burke thanks for the info and also taking the time to reply... I’ve subscribed to your channel and found it very good so big thumbs up 👍 I’m in this trade 30 years and picked up some useful tips from you 👍 as the saying goes you learn something new every day. I hope you didn’t think i was being critical towards you in anyway because i wasn’t. Look forward to the next video. Regards Eric.
Never thought you were being critical, it felt like you were trying to give me info on a job to make it easier, I try and take in whatever I can in all jobs & in this game nobody knows everything. If someone knows an easier way then that's nothing but useful.
Thanks for your kind words, it is appreciated. I always try to reply when I can. Thanks again Eric.
Regards
Gerard :)
Excellent video !!! do you have a video for the replacement of air-blower ans his resistance ? thanks :)
thanks!! "from Portugal"
Thanks Miguel
I have just changed the fuel filter and the car won't start. I didn't add any diesel to the filter. Is this a reason why car won't start?
To help get it restarted again, check to see if the primer button is functional on yours, prime/pump it until it gets solid and the filter will be filled, see if that sorts your problem, will take a good bit for engine swings to go. I hope this helps
Nightmare of a pug to service
Is this a robotic transmission ( half manuel)?
Excellent channel. Subscribed ! 👍🏻
Thanks
You're welcome ! :)
Hi, where is the link with Reset the service interval....? ;)
Great video. Thanks
Cheers Steve
Hey, I'm from the Philippines. I have the Peugeot 3008, Where can I buy the oil filter?
Is this the same for a 3008 1.6 Vti 120 sport Mk1 2011 ?
Nice Vid!
Bro I have a 3008 2015 and need to remove the center console in order to access the shifter (juice spillage) so shifter is sticky...
Do you know how to remove that?
Help! lol
Are the 5008 2013 model the same great video very helpful
🙏👌💪
Thanks Gerard, il let you know how I get on 😩😩😩😩😩😂😂 Friday is d day
What size washer is that.
Is there a way to drain the oil without taking the whole car to bits? Doesn't it have a hole in the plastic covers on the bottom?
You can drain the engine oil quite sucessfully through the dipstick tube with this...... www.ebay.co.uk/itm/7L-Manual-Pump-Fluid-Extractor-Vacuum-Oil-Transfer-of-Car-Diesel-Fuel-Litre-Tank/123531232777?hash=item1cc3090609:g:pvEAAOSwT9Zd6b3S
1,6 or 2,0 HDI?
Thanks. Is that a 1.6 hdi
Yes
At 8:33 of the video , how do I confirm that filter stick is in the pin hole before tightening it , do we just blind guess 🙃
You can insert the filter in the right position and then cap on and tighten it.
Its a pity you didn't show how to unscrew and screw the oil filter case
Hi stupid question :) where is fuel filter on Peugeot 3008 2012 Vti gasoline engine? 🤔
Since you havent got an answer to your question: it's most likely inside the gas tank. That means in order to change it, you have to gain access to the pump inside the tank. Only rarely is it even necessary to change it, if ever, unless the fuel for some reason is dirty.
Subscribed 👍🏻👍🏻👍🏻👍🏻
:)
I think I’ll just pay the mechanic the £109.. sod this 😂 good tutorial though but not for me
Who ever designed the mechanical parts of that car, deserves to be punched in the face for how complicated it is.
Regret to having this car
Really nice video ... I know I'm very late to the show as this video was posted years ago... But on the video there is a plug on top of the crankcase breather pipe you can see it at the 7:49 minute point ... Is this a spare/blank plug?