Milwaukee Heated Jacket Hack!
HTML-код
- Опубликовано: 26 авг 2024
- Tested on Milwaukee 12v heated hoodie.
Smarkey Heated Jacket Adapter Charger USB Plug Cable for Milwaukee, Dewalt, Revean, Snap-on, Metabo, Craftsman, AEG, Makita (Easy for Travelling and Outdoor) www.amazon.com...
ROMOSS 30000mAh Power Bank Sense 8+, 18W PD USB C Portable Charger with 3 Outputs & 3 Inputs External Battery Pack Cell Phone Charger Battery Compatible with iPhone 11, Xs Max, MacBook, iPad Pro www.amazon.com...
Thanks so much for this video. This works so good am impressed how much better it is 8 plus hours on full heat and it still not dead would recommend this to anybody
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
Good Solution if you don’t have Milwaukee m18 Batteries,But if you do,you can get the Milwaukee Power Source Adapter and use the m18 batteries.
Yes you can, but the adaptors are about $20 and way bulkier and heavier than this. Not to mention having to use M18 batteries. Im on the Milwaukee platform so I actually have M18's but this is the best option imo because size and battery run time.
Jump starter batteries work as well. Most have the same 12V out 5.5mm jack as well as USB ports.
Great idea!!
Best battery I've found is the 12V talentcell.
@BradK hey could you tell me which one specifically
@C0Y0TE I bought a cheap one and it ended up swelling so I bought a Talentcell battery, their awesome and they plug right in.
@BradK ok i just ordered one... battery and jacket here friday... be used next winter thanks
I found adapters from Aliexpress to type C or type A , for the exterior cable of the jacket insert, but I do not know whether or not there is a risk of them burning the cable
Thank You.
Thanks bug dawg
Thank you for watching, I'm going to have an update on this hack uploaded this weekend so stay tuned!
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
I have this battery and if I have the vest on Hi the battery shuts off every couple minutes. On medium it stays on. What a pain
Make sure you are using the right USB battery input if you are using the traditional USB adapter. It should say fit+ and will be blue. I haven't had this issue with the USB C adapter.
Thanks for watching, I just updated this hack with a new video. Please check it out. It might fix the problem you are having!
I converted mine to a 2s 7.4v 4000mah lipo battery works great
Nice!
Hey cordon what's the typical run time with the lipo
3 hours on a 5000 mah 1hr 30 mins on a 2700 mah when on high , you need a low lipo battery alarm set it at 3.2 volts only £3 on ebay
@@gordonwright85 one more thing i found out is yours a single or dual zone coat? appreciate you responding man
@@HeathMooreKentucky it's a 3 1 on the top x 2 on the side cheap Chinese one the reostat on /off long press button might need replacing with a 5v to 12v only a £1 ebay mine was OK works great if it blows it will still work but be on high all the time 🤞 ?
So it's been a year. How is it going to the power bank and your heated jacket?
I haven't used it since last winter, but I use my power bank all the time. Plugged it in last weekend when it was a little chilly here, and it worked flawlessly!
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
This video is 3 weeks old now. Can I get. A update on how it’s holding. Cause man these m12 batteries are trash and this is exactly what I’ve been looking for
It's held up great I've charged its had many power cycles of charging and powering stuff as well as multiple heat environments. I've left it in my car at negative temps and it's still holding up well.
@@ReelAnglerReviews you’re goated and I’m getting on this pronto !!!!!
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
Bravo~ insane masterpiece, TTested-
Thank you, hope this video helps.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
Can you do this with a dewalt battery and adapter for dewalt to 9v ?
Good vid need link 4 adapter 🙏🤔
It's in the description, thanks for watching.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
So I got the adapter and paired it up to an anker 40k power bank as I couldn’t get hold of a 30k one. Now I have the same cable you have it shipped from the us to uk. However I have an issue the pads heat up and work fine then it randomly shuts off. I don’t know why I don’t think it’s the cable but can not be sure. It’s frustrating to say the least I intend to go fishing at night at the bottom of some cliffs and this needs to be working a 100% any ideas what’s wrong cheers
It's probably the cable. Possibly a short or overheating.
Hey, can we get an update on if this hack is still working for you? Thanks
Yes it is, still working strong powering the jacket as well as all my other devices.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
So your power bank is 111wh, the m12 2.0 would be 22.2wh and 3.0 would he 33.3wh and the bigger m12 6.0 would be 66.6wh.
Theres also an efficiency loss when stepping voltage up or down. So this pack may last 3x the time of a 2.0 and almost doubke a 6.0 m12, its not nearly the 30:2 ratio or 15x you mentioned
Thanks for pointing this out. I will try and include this information in my next video. I will be updating you guys with the new version of the adapter and new milwaukee hoodie.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
I use the M18 5AmpH battery with their power source adapter. $25 works great!
That's a good hack too! The only reason I went with this is because I can charge my phone with it and use my phone charger to charge the battery itself instead of having a Milwaukee charger with me everywhere
The power source adapter has a 12v out to heat jacket and USB out to charge phone at the same time.
@@jasonlumetta ah, your right I think I've seen those. They are a great option too as long as you have Milwaukee chargers near you. If you already have M18 stuff it's probably the best bet.
@@jasonlumetta - but you can’t charge the Milwaukee battery that it uses without the Milwaukee charger; the device in this video will take a charge from any USB charger, and those are all over the place.
@@stevebabiak6997 you're not wrong, but a milwaukee battery takes an hour to charge, these power banks takes hours. Plus milwaukee batteries are much tougher. Only negative in my opinion is the brick size and shape of the m18. That's definitely a massive issue for me.
@ Tested Reviews:
I'm looking to do the same with battery.
Question, I thought QC3.0 battery pack adjusts the voltage 5v 9v 12v on it's own, smart charging.
So why the need for the step up adapter?.
You can buy USB TO Female DC adapter with no step up . Do you think in would work or should I just buy the adapter you are using?. Thanks in advance!
I wish I could give you an answer but I'm not sure. Initially I tried with different connections and batteries. This is just a guide on what I know for certain will work to save you time trying other products. Hope the video helped.
Hi: I bought a Dewbu battery bank for my Milwaukee m12 jacket.
But you must purchase a adapter.
Yes, QC3.0 battery pack can adjusts the voltage 5v 9v 12v on it's own. but you need this milwaukee heated jacket magic cable to excited USB Port from 5v to 12v to release 12V voltage. So , you need buy >22W POWER BANK which use QC3.0 or PD function tech.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
The USB adapter probably has some kind of electronics to study the voltage. I’m not sure. I just ordered mine from the link. Looks like the pack has 18vdc. Maybe the adapter drops the voltage down?
Hi great video, do you know what type of female plug and size is used on the adaptor ?
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
So technically, the adapter requests my powerbank 5v 3amp the adapter turns it into 12v 1amp( according to the sticker in the adapter)does that mean my power bank is wasting power? Will the hoodie take longer to heat up?
I think you need a battery bank that meets the 12v requirements. That's why other battery banks will not work with this adapter, and this one will. I'm going to upload an updated video, so please subscribe and stay tuned.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
How many amps and watts can this jacket hold beforee melting ?
That's a good question! All I know is the jacket gets hot enough to make me feel like I'm melting!
I just bought everything you posted to mod my jacket. How is this mod working after a year?
Still working strong, thank for watching.
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
Will this wear out the jackets circuitry faster, or is it fine with that?
Not from my experience. I know they will run using a Milwaukee 6.0 battery so im sure a battery pack won't fry it.
I have this exact same setup on my M12 hoodie and it turns off after an hour of use on high. I’ve tried 2 different step-up adapter and 4 different battery packs with the same result. Any ideas?
are they cheap battery packs? chinese?
You can select any QC3.0 power bank and just need buy this milwaukee heated jacket magic cables and then you can connect with your milwaukee heated jacket easy@@59plexi
ruclips.net/video/2ia3PFmcZ_8/видео.htmlsi=i1qqiNqndmxw0fJV
Can we charge a heated Jackets from normal mobile power Bank??
normal power bank can not work. QC3.0 battery pack can adjusts the voltage 5v 9v 12v on it's own. but you need this milwaukee heated jacket magic cable to excited USB Port from 5v to 12v to release 12V voltage. So , you need buy >22W POWER BANK which use QC3.0 or PD function tech.
I bought a ninja power bank on Amazon. It's 3.0 for ports should work right ? 20000 mah battery. Also I just grabbed a cheap cable like that one you showed on Amazon hoping it will work lol
I believe it should still work.
@@ReelAnglerReviews I got the cable but the silver pin was to big do you by any chance no what size the pin is? I ordered the same cable but that pin was just a lil to big.
@@latenightdadjokes9193 the product description on amazon says it only works with 5.5 mm connectors.
@@latenightdadjokes9193 the jacket voltage must be 12v, power supply must be QC 3.0 or QC 4.0, jacket connector size must be 5.5 mm.
@@ReelAnglerReviews yeah that's what I got but that little pin didn't fit was to big so I have no idea which one to get now unfortunately Canada doesn't have the one you posted. :(
Does it fit in the pocket with no problem
It does on the newer style of Milwaukee hoodies.
hi sir
is it teleclast 30000mah
out1: 5v/1.0A (max)
out2: 5v/2.1A (max)
out1+out2: 5v/2.1A
compatible?
It must be 3A or 12v 1.5A because the jacket runs on 12 volt.
No way u will get 18h