One Expensive Thermostat And EGT Sensor Replacement - Salvage Bentley Flying Spur Project
HTML-код
- Опубликовано: 28 окт 2024
- Addressing a few issues with the thermostat and exhaust temp sensors on this salvage 2006 Bentley Flying Spur project.
Subscribe to my channel: / @4laneblacktop
Check out my merch store: 4lane-blacktop...
Be sure to follow me:
Facebook: 4Lane blacktop / 4laneblacktop
Instagram: 4Lane_blacktop / 4lane_blacktop
Subscribe to my channel:
ruclips.net/channel/UCYILNBUXUPcagroJg3-rQAg
Merch store: 4lane-blacktop.creator-spring.com/
Be sure to follow me
Facebook: 4Lane blacktop facebook.com/4Laneblacktop/
Instagram: 4Lane_blacktop instagram.com/4Lane_Blacktop/
You ALMOST make me wanna own one of these pain in asses! Occasionally I have to work on the bosses 2013 GTC so I stay tuned to your channel. Great work, you've got more patience than I have. If it wasn't for the VW connection, you'd be screwed, but I'm sure you know that already!
Re watching this Playlist. Hit a sign post during a snow storm and f'd up my bumper cover. You make some good videos on how to perform this work. Others just like posting "budget bentley" videos for clout. Keep it up man!
Thank you for the kind words. I have a new Bentley project coming soon so stick around for it.
Will do brother, keep it up 💯
I have a brand new flying spur front bumper cover if that's what you damaged.
Awesome video - happy to see more Bentley Flying Spur content
Really enjoyed your videos on the rebuild and glad to see you are still looking after this beast.
Hi mate , great content again 👏👍
Thank you
Great Bentley DIY content! This video is very straight forward.
Questions:
1. Did you need a special tool to remove the ignition coils or did they pull off with your hands?
2. What torque specs did you use for the bolts on the upper intake Plenum?
Thank you. The coils just pull out with your hands. I believe the bolt torque is 12 or 14 ft-lbs.
@@4LaneBlacktop thank you!
@4LaneBlacktop are you familiar with where the heater core is located and the removal process?
You the man! I ordered 2 boards from Sid also. Lets hope he sends the correct ones! At 8:50, do you see this breather line connected to the intake manifold right under the throttle body, it starts as a steel line and curves downwards, connects to a hose and disappears down next to the MAF. This pipe has come loose on my end and I can't see at all where it connects. Any help would be most appreciated! I'm on an '05 CGT
Hello @4LaneBlacktop,
Which part number of the thermostat housing did you use, and was it the same celsius ° rating as the original Bentley unit, as there are thermostats with ranges from a 87°c, 100°c, and 105°c, between the two brands.
Also, the wire is not a sensor, but in-fact, a heating element to control the opening and closing of the thermostat itself, depending on driving at speed, or idling in traffic, or just sitting at idle, the setup is to allow it run hotter while idling to reduce emissions.
How about replacing the upper radiator hose? Do you have to remove intake as well?
Are there any bleed points when you drain and refill the coolant or does it self bleed ?????
Due to the thermostat location I believe it self bleeds because it is at the highest point on the engine
hello sir, where did you get these boards for the gas temperature sensors?
Google Sid Motorsports. They are in Poland
Did you re-use the lower intake manifold gaskets? part # 07C-129-717-D
I did reuse the rubber lower gaskets
@@4LaneBlacktop so 8 upper intake plenum bolts N10158203 are recommended new?
GREAT VIDEO !!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks. Glad you enjoyed it
Amazing.
Have you had to replace your knock sensors yet?
@@GarageFumesNina no never replaced them
awesome
Hey sir I have a few questions
Where to by gas thermostat sensor please?
Lots of extra work made by bolting 2 vr6 motors together , I must admit , I would not do those jobs willingly but I cut my teeth with multi carbs and old water injection turbos . Life was just that much easier then !
can anyone put all the part numbers needed for the spark plugs, thermostat housing, EGT, intake manifold gaskets, intake manifold botls pls
They can all be found at scuderiacarparts.com. Best place to buy most of the parts also.
Can you share where you bought the boards from ? pls pls
Sid Motorsports in Poland. Google them
@@4LaneBlacktop omg Ty I love your content btw keep up the good work
@@Hugepepee thank you
4laneblacklanetop what color Bentley flying spur v8 would you buy when you win the lottery
Id go with a dark blue even though I really do like the dark purple with the black trim.
@@4LaneBlacktop dark blue is beautiful
Black is the best color
Black is not a color, it's a friggen part time job! No thanks!