My Cheap Salvage Bentley Flying Spur - Addressing Suspension System Faults
HTML-код
- Опубликовано: 12 сен 2024
- It is time to look into the suspension fault codes after getting this thing back on the road.
Subscribe to my channel:
/ @4laneblacktop
Be sure to follow me
Facebook: 4Lane blacktop
Instagram: 4Lane_blacktop
Check out my other videos on this Bentley here: ruclips.net/p/PL-arRGUA-sv_-KCtJ88wsYiYc3JHrVHjF
Subscribe here: ruclips.net/channel/UCYILNBUXUPcagroJg3-rQAg
Follow me - Facebook: 4Lane blacktop facebook.com/4Laneblacktop/
Instagram: 4Lane_blacktop instagram.com/4Lane_Blacktop/
I give you props for your logical deductive reasoning. To fix a car that complicated for a self taught mechanic is awesome.
Good for you brother!
Thank you.
I wish you would have shown the board after you cleaned it, and the repining process. I mean that was the star of the show.
I don't know what process you used to clean that board and the connectors, but DeOxit D5 is the best stuff out there.
Love the Bentley DIY videos! We need more of them!
These four door ones are boats,even though they are fast most people who own these sit in the back and have a driver take them to work and back doing 70 mph tops.You need to get the two door one,i live up the road from bentley dealer,they have used two door ones outside for sale from $25,000 to $200,000,very nice car.
There was a 2 door at the auction not long ago. I was high bidder but it had a reserve. They reauctioned it the following week and someone out bid me by $5k.
Using that VW unit was a good bit of luck,those things cost a fortune from the dealer,lucky that they are using other cross over parts to save money.We have a old mercedes ML that needs the same sort of thing,the dealer want $1,700 for it,we have bought a couple of used ones but cannot get them to work,i keep telling my husband to scrap it,he says he loves that car,men and cars.
I cant believe I watch all the video from Auction to here... very interesting..
Kongo for life and Afrika for life....
Thanks for sharing this with us, great videos of a great mechanic at work, so admire your resilience to problems with this car and getting them sorted, as an ex Bentley owner I can imagine what the costings would be to take it to even a specialist let alone a main dealer!
Very well done.
Thank you
Goodness gracious me!😯😯😯.. All that tech looks mind boggling. Well this guy have the brains and patience to do the work...
Great video I fixed cars since I was a child and still do. A little cleaning goes a long way, great video
Fantastic project! Congrats on the purchase and the success with the repairs!
Thank you
You are an exceptional human being... A man of many trades .
I followed you from day one your a patient man knocking off bit by bit of what could be the problem and fixing it.Excellent. While watching you gave me a tool to use. My Chrysler has a long crack(about three feet) I could put Masking Tape on it and you wouldn’t see it . With the soldering gun, reinforced plastic, I can fix the problem. Thanks That’s a nice Bentley. I don’t know if you’re going to keep it or sell. I hope you get what you want. I will keep watching.
Looks like you've got some good luck going for you. Maybe the last owner spilled some #Perrier in the trunk while loading their upscale groceries in the trunk, & didn't clean it as well as they thought.
That rear suspension module is located near the battery. The battery fumes gases and unless those gases are properly syphoned out of the car with small venting hoses, those gases and heavy metal toxins can react to the delicate metals in that module and other surrounding delicate plugs. The corrosion on the plugs and module may be related to the battery gasses.
Good work bro. Though I missed the part where you connected the cable to the car.
Awsome video good info that would have costed us bentley owners thousands.thanks and keep it up!
What do you do your so rich?
I have seen rain water/car wash water intrusion cause just this problem.
Tail light lenses are notorious for leaking on even the most expensive cars
Your module damage is typical of a long term rain water/carwash water leak.
You'll notice the orange stain on the RHS but not the Left HS of the trunk floor - once again an indication of a water leak.
The remedy is cheap and simple. Remove the entire lens, and lightly coat both sides of the existing gasket with RTV silicone, allow to 50% cure, and refit.
Check for leaks with a squirt of the garden hose both before and after repair.
I'm a retired mechanic and when I retired I had 2 ASE Master certificates and more and I love your videos! I want to know what kind of camera you use and also what lights you use.
Thank you. Glad you have enjoyed them. I only need AC and automatic trans certifications to become master certifed. I will get them at some point. As far as camera equipment, I am using a Samsung Galaxy Note 10 phone shooting in 1080p 30fps. I do not use any lighting. Voiceovers are with a blue snowball mic or my note 10 mic.
Loving watching your project with the Bentley David from Edinburgh Scotland
I watched every video on the Bentley, I guess I have to subscribe
same here
Nice violin playing
You even played the correct fingerings BRAVO NICE VIDS
Thank you
You might ck the seal around the tail light assembly since that module is under it, just saying. Be safe. Peace🇺🇸
Great work and very good info. 4LB
Very impressive. Keep up the good work
Thank you very much
GRATS TO YOU! a few hundred bucks in front plastic and paint, detail....that is a fine ride! which auction lot do you look for cars? GrEEEaT! oB
I usually get my salvage stuff from IAA
Great Job!!
Battery gassed in the past and caused that corrosion.
I wish you were my mechanic your awesome
clever guy done well sir
Thank you
I've been back checking your Bentley vids, ok, I'll subscribe!
Great job , as would be same for quite a lot of motors similar ,
Did the software cost?
With that software can you now clear all the old codes and reset them?
The software was licensed thru the purchase of the cable. I can reset all codes in every module, can even reprogram modules, force functions, and recalibrate many things that only Bentley can do.
4Lane Blacktop can you put the link for the cable??
Hi do you have the link for the diagonstic cable I’m trying to buy one ?
Great video! May try to buy a used Bentley.
I am thinking that control module was not original to the car and already replaced as I read they are a weak point. If so, maybe the replacement came from a junkyard or other unprotected source and it got installed with trapped moisture which got locked in.
Possibly
Good clip
Sounds like some of the faults I had on my 2005 jaguar XJ8L, I know have driven it for 7 yrs with no major problems. Always keep it in a climate-controlled garage. Moister with these cars is an electrical killer for sure with the hundreds of modules on them.
U 4 got to say how u reprogrammed that module! Is there a function on that $80 scanner for that?
Basically all you do is a re-calibration on the ride height sensors. Yes, that VCDS and that cable allows you to do that.
If I'm not mistaken wasn't the car a rebuilt/salvage title already according to the auction listing? Possibly a flood damaged vehicle since its in such good physical condition. Otherwise how would that much water have gotten into the modules? Just a thought..
It was not a previous salvage rebuild.
will that do susspention legs please
nice keep. up good work
Thank you
Hi there I messaged you a while back and asked you where you got the faults code reader I've since purchased one but it doesn't seem to work when I contacted the company they said it was an illegal clone, but I don't care could you do a video on how to use this please. Thank you for your help
Bentley always need something smh
Heck yeah 👍
Partner I wish you lived here it would be cool to hang out with ya.
How much did you pick up the Bentley from auction?
Why don't people that have that much trouble with those foreign Exotic cars remove the computer and replace it with a programmable computer?
You can but its expensive
What happens to the 62 wagon project?
I have some videos coming soon. Im in the process of editing one right now.
Notice after your last commenthe that the Check Engine Light is on, so perhaps not "all well". Does make you wonder if the previous owner sabotaged the Car to pay off a gambling debt - needed cash urgently? Difficult to understand the story. Perhaps one of his Kids thought they'd give Dad a pay back? So, I wonder why the other gremlins didn't show up after you managed to get the Car started doing your good work with the fuel. Surely a "Do not drive - take to the dealership" would flag up on such an expensive Beast? Did you mention how much you paid for it? Lovely Car. What year is it? Good luck
It is a 2006. Check engine light was on from a previous misfire code. It cleared up and runs great now. It doesnt seem to have any more problems anywhere but the paint issues which Im working on now.
@@4LaneBlacktop That's good news if its running fine. I did wonder if that messed up fuel had got through to the Cats would you have one hell of an expense if they couldn't be cleaned. Are emissions OK? A high risk purchase but you seem to have struck lucky. I'll check out your other vids sometime. Have fun.
Looks like that car's been in the water.
Never has been
Bro I'm from dubi how to buy this device and what price If i buy this please tell me.
Heres a link to the scan tool. www.totalcardiagnostics.com/shop/vagcom-rosstech-vcds
Where can I purchase that tool for the software ?
Google VAG com cable. That should get you to one to buy.
Someone already mentioned DeoxIT.
I've seen that recommended on some other automotive channels. Here is a link to it on Amazon. Good to have this stuff around if you're going to be working on vehicles.
www.amazon.com/dp/B00006LVEU/ref=cm_sw_r_cp_apa_i_Ix8fFbPFFE9ZE
What video editing software are you using?
I am using VSDC pro. Great program once you learn to use it.
What about the engine light staying on...
It was from a previous misfire code. Its cleared now.
Hmmm....was my dads car and fell asleep at the wheel and ended in the lake for a day before towed out....
Where did you get the Ross Tech VCDS Cable for $80? Thanks!
Got it here. www.totalcardiagnostics.com/shop/vagcom-rosstech-vcds
He said a little bit LMAO sorry
Will like to buy!"
Hi can you give me a call regarding Bentley programming
When ever you touch or handle stuff like this board your body and the board should be grounded.
You can produce a huge static charge on your body of maybe 20,000 volts that will instatly fry those tiny components. Many of which operate at just millimothe of a volt.
Bentley you make best car's, but looking at some parts damage, you should learn more. Try to learn from this person who repairs only from his garage.
It's quite a shame see you using a cloned Chinese knock-off Ross-Tech VCDS cable.
I dont really work on too many VW-Audi-Bentley vehicles so spending big money on a scan tool for them didnt make since. Im all about doing things on a budget also.
@@4LaneBlacktop Man, I'm not even going to name what you did and risk being shadow banned. But if you plan on reaching the likes or Samcrac or Tavarish you have to take care with this kind of stuff. Just imagine reaching an audience of 1M and having all Ross-Tech fans or just simple Americans wanting to protect American jobs from Chinese knok-offs bashing you for using counterfeit material. Regarding being on a budget, I'm all about it and glad to see your work. In this case, you could have just go to ebay and buy a used one. They usually pop up there below 100 USD. That's how I got mine. Anyway, I wish you luck with your channel, I am subscribed.
All those fault codes cause scotty kilmer voice $ Pit
It’s possible this can was a flood damage car
Not at all
5
number your videos