sorry to be offtopic but does anyone know a method to get back into an instagram account?? I was stupid lost my password. I appreciate any tricks you can give me!
@Darwin Skylar thanks so much for your reply. I found the site on google and Im waiting for the hacking stuff now. Seems to take quite some time so I will get back to you later when my account password hopefully is recovered.
Us fixedwing folks need Working throttle position, and compass headings. I was about to pull the trigger and buy the SB system when he stated throttle position is now working but then he showed how it only shows when disarmed which for me is useless. Compass is a must too but throttle position definitely is a plus when flying proximity and semi LR fixedwing
Wow, this is fantastic news. I don't like DJI and wasn't that impressed by the first release of Shark Byte. I have just been waiting for Whatever's Next to be the digital system to jump in on. Shark Byte just became way more compelling. I also really liked your throttle scaling vid, subscribed!
It's gettin' good! Welcome aboard your TMacFPV Team and thanks for your support TheLostSquadron! 🙏 Have a great weekend & hope you get in some "Fly Time!"
I updated the firmware of my vrx , for some reason it got stuck until my battery drained. Now my vrx wont bootup. Anyone know how to restore to original state?
Perhaps try process described on page 14 of User Manual "Steps to Flash Goggle Module in Case of Not Booting Up" available here fatshark.helpscoutdocs.com/article/171-shark-byte
Now only if SharkByte would add Compass heading, I already have the DJI system and only thing I dislike about them is no Throttle position osd and compass or heading. Thus is a must for of Fixedwing guys. Looks like FSB doesn't really have throttle position either. Only when disarmed does nothing for me. Once Fatshark SB gets these osd characters working I'll definitely buy it. DJI on the other hand I seriously doubt will even update there Goggles anymore including the V2 goggles. We was lucky we got what we got from DJI.
When my update finished I unplugged and plugged back in but I have no video, been searching everywhere and cannot find a fix for this. Even did the switch on the back like the manual said but I get no red light when I flip the switch off.
If after doing all this the file is never recognised how would you troubleshoot? I ask because Theirs a new beta firmware available for sharkbyte on the divimath website. But it's simply not being recognised. Edit: got it sorted
So after updating firmware when I go to 1080 I notice the right side of the screen on my goggles slight chopped. Looks like everything moved a little to the left. Going back to 720 it’s back to normal. Anyone notice this??
Hey Stephen! Yes! That's the short answer. With the latest Canvas Mode firmware see my video on it here: ruclips.net/video/hHu7HkH7rpM/видео.html you get almsot exactly the same OSD functionality as with analog FPV. the one item I can think of that isn't the same is if you use "throttle value" as an OSD item with your analog FPV, its not the same with Shark Byte (i explain the difference in the video I just gave you the link for). Also, currently if you change your VTX channel after powered on, the OSD VTX channel displayed doesn't change. There's a Beta firmware version fix for this now and will be incorporated into the next firmware update. Which, by the way, is one of my favorite things about Shark Byte. the dev(s), actually are listening to their customers and incorporating everything they can into it as quickly as possible Outstanding customer Service! Rapid advancements coming all the time in both hardware & firmware.
i lost all my OSD when updating firmware , even when enable again under Betaflight and check all the settings one more times ,what can i do .I even flash FC card Zeus to 4.2.8 but nothing more .
Not scared that you‘ll burn out your LCD screens with the sun shining directly into your fresnel lens eyepieces? 😅🤭 fatshark hast to really hurry up with byteshark‘s development
Nice firmware update Fat Shark! Keeps gettin' better! What update(s) do you want to see next?
sorry to be offtopic but does anyone know a method to get back into an instagram account??
I was stupid lost my password. I appreciate any tricks you can give me!
@Milan Jamari instablaster ;)
@Darwin Skylar thanks so much for your reply. I found the site on google and Im waiting for the hacking stuff now.
Seems to take quite some time so I will get back to you later when my account password hopefully is recovered.
@Darwin Skylar It did the trick and I actually got access to my account again. I am so happy:D
Thanks so much, you saved my account!
@Milan Jamari Glad I could help xD
Can you make another flying vid using it pls.
Keep it up fatshark. Ill drop dji in a heartbeat if they keep this up.
Us fixedwing folks need Working throttle position, and compass headings. I was about to pull the trigger and buy the SB system when he stated throttle position is now working but then he showed how it only shows when disarmed which for me is useless.
Compass is a must too but throttle position definitely is a plus when flying proximity and semi LR fixedwing
Wow, this is fantastic news. I don't like DJI and wasn't that impressed by the first release of Shark Byte. I have just been waiting for Whatever's Next to be the digital system to jump in on. Shark Byte just became way more compelling. I also really liked your throttle scaling vid, subscribed!
It's gettin' good! Welcome aboard your TMacFPV Team and thanks for your support TheLostSquadron! 🙏 Have a great weekend & hope you get in some "Fly Time!"
nice 3 point shot and lakers scores! with 73 71
OMG this channel came out of the blue, and all the best into is here.
😄 Welcome aboard John!
Nice development for shark byte wish having that :D
great stuff i cant wait for my shark byte dont have it yet and for sure once i get it ill do all this thank u tmac.
its not actually 1080~ its upscaled.. it wont look any different.
Exactly
I updated the firmware of my vrx , for some reason it got stuck until my battery drained. Now my vrx wont bootup. Anyone know how to restore to original state?
Perhaps try process described on page 14 of User Manual "Steps to Flash Goggle Module in Case of Not Booting Up" available here fatshark.helpscoutdocs.com/article/171-shark-byte
Now only if SharkByte would add Compass heading, I already have the DJI system and only thing I dislike about them is no Throttle position osd and compass or heading. Thus is a must for of Fixedwing guys.
Looks like FSB doesn't really have throttle position either. Only when disarmed does nothing for me.
Once Fatshark SB gets these osd characters working I'll definitely buy it.
DJI on the other hand I seriously doubt will even update there Goggles anymore including the V2 goggles. We was lucky we got what we got from DJI.
Thanks from Brazil
You're very welcome from U.S.!😁👍
Updated. It works fine. Thanks
When my update finished I unplugged and plugged back in but I have no video, been searching everywhere and cannot find a fix for this. Even did the switch on the back like the manual said but I get no red light when I flip the switch off.
Try FatShark Support, they're usually good within 24 hrs or so www.fatshark.com/support/
If after doing all this the file is never recognised how would you troubleshoot?
I ask because Theirs a new beta firmware available for sharkbyte on the divimath website.
But it's simply not being recognised.
Edit: got it sorted
nice work m8
Thanks Ripper Fpv!
So after updating firmware when I go to 1080 I notice the right side of the screen on my goggles slight chopped. Looks like everything moved a little to the left. Going back to 720 it’s back to normal. Anyone notice this??
Do you get the full OSD functionality like PID and Rates?
Hey Stephen! Yes! That's the short answer. With the latest Canvas Mode firmware see my video on it here: ruclips.net/video/hHu7HkH7rpM/видео.html you get almsot exactly the same OSD functionality as with analog FPV. the one item I can think of that isn't the same is if you use "throttle value" as an OSD item with your analog FPV, its not the same with Shark Byte (i explain the difference in the video I just gave you the link for). Also, currently if you change your VTX channel after powered on, the OSD VTX channel displayed doesn't change. There's a Beta firmware version fix for this now and will be incorporated into the next firmware update. Which, by the way, is one of my favorite things about Shark Byte. the dev(s), actually are listening to their customers and incorporating everything they can into it as quickly as possible Outstanding customer Service! Rapid advancements coming all the time in both hardware & firmware.
👍
i lost all my OSD when updating firmware , even when enable again under Betaflight and check all the settings one more times ,what can i do .I even flash FC card Zeus to 4.2.8 but nothing more .
Did you use the CLI commands as shown in this video? ruclips.net/video/hHu7HkH7rpM/видео.html
@@TMacFPV Yes i take a look at this but wich port représent Minus 1 ? Thé number of port using for VTX SB ? Mine is on UART 3 , it mean i set 2 ?
@@popeye7833 correct 👍 If you have Shark Byte VTX connected to Port 3, use CLI command for 2
@@TMacFPV thank you for your précision and answer ✌️
huwhite
Not scared that you‘ll burn out your LCD screens with the sun shining directly into your fresnel lens eyepieces? 😅🤭 fatshark hast to really hurry up with byteshark‘s development