Ready to become a Shark Byte "artist" with Canvas Mode? Got bitten by "the Shark" yet? What are ya waitin' for? Just keeps gettin' better! 🤩 Raceband channels now implemented too! Remember to visit my site at tmacfpv.com/ for more FPV fun stuff!
Great tutorial as always. Very easy to follow and understand. I've been flying FPV for years with analog and more recently with DJI but I'm totally new to HDZero/Sharkbyte. Thanks for making the transition easy!
That looks like a lot of fun! What a cool way to make your fpv experience unique! Thank you for a great tutorial. Your yard is really growing in nicely- makes a great backdrop!
Awesome tutorial. You're one of the reason why I went for SharkByte route. Waiting for my SharkByte VRX unit and 3 pairs of 200mW VTX with Foxeer DigiSight cams. Hopefullty it arrives by Friday, so that I can get to work on installing it this weekend.
Thank you for the video. First time on the channel and now a new subscriber. Looking forward to watching your other videos and new Shark byte content. I use DJI on the 5 inch quads and Shark Byte on my whoops. I love it. Thanks again
great vid chap :-) thanks very much, helped out a lot with my setting up of the Shark Byte system. one thing to note is the crappy update harness on mine was molded incorrectly and bent a pin in the module, sorted now though.
Thanks for this video. I'll still have to watch it 3 times to get it all to stick! But I think you keep it simple enough, I might even try it! Currently using my JumperT16's timer:-(
And so long as you had a VTX that could transmit race band(which, I ain't never met one that can't), you could manipulate your channel in raceband as well.
Are you using Betaflight 4.2.8 or newer? If so, are you using the latest version of the User Manual (08042021) available here?: fatshark.helpscoutdocs.com/article/171-shark-byte . If so, have you entered the appropriate CLI commands for the port you have connected Shark Byte to per the latest User Manual, page 11? Have you enabled OSD in your Configuration Tab in Betaflight? Have you updated both the VRX and the VTX to the same compatible version firmware? These are all things you can check
Nice demonstration. Is the OSD data sent separately over the air and drawn in the receiver, or does the FC draw it and it becomes inseparable from the video image? Still on analogue and watching for a while with interest.
I followed the instructions on both fatshark manual and your video perfectly and it said install successful on both rx and tx but I’m not getting any picture. It’s just stuck at the scanning menu. It all worked before I tried updating now I can’t even get a picture. Any idea why?
Have you entered in the appropriate CLI commands for Canvas Mode per the latest version of User Manual? Other thing to check is perhaps MIPI cable/connection
I’m running crossfire on mine. You said we don’t have to use an aux channel for LQ in betaflight but do we still have to have LQ turned on in the radio under the crossfire config?
@@TMacFPV thank you! Now I have another issue but it isn’t with set up. My hdmi cable needs to be replaced. My video locked up and froze at very close distance. I had this happen yesterday and have been testing. I used another usb cable and it doesn’t blackout or lockup.
I had not until your comment. I tried it out for you and mine is "stuck" on Auto as well. Perhaps send a message to FatShark as feedback? They may not know (or it may be fixed with BF 4.3?)
@@califpv Oh, it is already! A few f/w updates already and it's only been out a few months. 2 VTXs out and another on the way. Very compatible with Betaflight & more compatible digital cameras to come💪👍Good stuff!
@@philthayer4087 There are more to it than that it also have OSD overlay from the Vrx showing antenna strength and if it is recording to Micro SDCard or not. Bigger clearer font.
@@TMacFPV honestly I am not trying to be a troll I've been in this hobby a little less than a year and I know just enough to kind of know what you're talking about. If you know what I mean
Ready to become a Shark Byte "artist" with Canvas Mode? Got bitten by "the Shark" yet? What are ya waitin' for? Just keeps gettin' better! 🤩 Raceband channels now implemented too! Remember to visit my site at tmacfpv.com/ for more FPV fun stuff!
ho fatto tutto ed è una bomba ottimo
I've literally just received my shark byte today so I'm grateful for your videos very straightforward thank you
Sure thing Blake, have a blast!🤩
Great tutorial as always. Very easy to follow and understand. I've been flying FPV for years with analog and more recently with DJI but I'm totally new to HDZero/Sharkbyte. Thanks for making the transition easy!
That looks like a lot of fun! What a cool way to make your fpv experience unique! Thank you for a great tutorial. Your yard is really growing in nicely- makes a great backdrop!
Awesome tutorial. You're one of the reason why I went for SharkByte route. Waiting for my SharkByte VRX unit and 3 pairs of 200mW VTX with Foxeer DigiSight cams. Hopefullty it arrives by Friday, so that I can get to work on installing it this weekend.
Thanks Less Da Stress🙏Wow! That's gonna be perfect!💪 You're gonna have a blast!🤩
Thank you for the video. First time on the channel and now a new subscriber. Looking forward to watching your other videos and new Shark byte content. I use DJI on the 5 inch quads and Shark Byte on my whoops. I love it. Thanks again
Sure thing Rotorhead FPV & Welcome to your TMac FPV Team! You're all set with both my friend!🤩👍
GREAT STUFF TMAC I HAVE TO SEND MINE TO GET FIX SO WHEN IT GET BACK ILL GET IN TO IT THANK U FOR THIS VIDEO.
Another great video TMac... Have a great weekend my friend
Thanks 🙏You as well California_Gaming!
great vid chap :-)
thanks very much, helped out a lot with my setting up of the Shark Byte system.
one thing to note is the crappy update harness on mine was molded incorrectly and bent a pin in the module, sorted now though.
Glad you found it useful Rammy! 😀
Thanks for showing off AD. Hope you like it. :-)
Awesome! Thank YOU Alf!
Shark byte is getting better at a fast pace!
Yes it is!🤩
Helpful information. Thanks for making these detailed videos.
Sure thing Ryan!
Thanks for doing these videos.
Absolutely Let's Fly RC! I'm lovin' Shark Byte and I'll do my best to keep up with updates👍
Better and better every time, and TMac if someone can't update it with you holding their hand through the clear instructions, well...
😉I'm excited for both it's current status and future improvements!
Wow. That is what I need. Thanks, Tmac
Absolutely Silvio! My pleasure friend 😁
Thanks for this video. I'll still have to watch it 3 times to get it all to stick! But I think you keep it simple enough, I might even try it! Currently using my JumperT16's timer:-(
Just upgraded another VTX to Canvas Mode yesterday. Simple & fun to fly with😁👍
Ottimo sei molto bravo
Grazie amico mio!
And so long as you had a VTX that could transmit race band(which, I ain't never met one that can't), you could manipulate your channel in raceband as well.
My OSD wont work.... I have followed the manual exactly. I have TX to RX and RX to TX and it still wont work. Any suggestions? Thank you so much!
Are you using Betaflight 4.2.8 or newer? If so, are you using the latest version of the User Manual (08042021) available here?: fatshark.helpscoutdocs.com/article/171-shark-byte . If so, have you entered the appropriate CLI commands for the port you have connected Shark Byte to per the latest User Manual, page 11? Have you enabled OSD in your Configuration Tab in Betaflight? Have you updated both the VRX and the VTX to the same compatible version firmware? These are all things you can check
Nice demonstration. Is the OSD data sent separately over the air and drawn in the receiver, or does the FC draw it and it becomes inseparable from the video image? Still on analogue and watching for a while with interest.
Yes, OSD data is sent separately over the air and rendered in the receiver.
Why is it called Canvas mode?? Looks like its just OSD like analog?
Updating tonight
I followed the instructions on both fatshark manual and your video perfectly and it said install successful on both rx and tx but I’m not getting any picture. It’s just stuck at the scanning menu. It all worked before I tried updating now I can’t even get a picture. Any idea why?
Have you entered in the appropriate CLI commands for Canvas Mode per the latest version of User Manual? Other thing to check is perhaps MIPI cable/connection
I’m running crossfire on mine. You said we don’t have to use an aux channel for LQ in betaflight but do we still have to have LQ turned on in the radio under the crossfire config?
Good question funflyingfools! No, you do not need to set LQ on a DST channel in your receiver setup either anymore wit latest update 👍😀
@@TMacFPV thank you! Now I have another issue but it isn’t with set up. My hdmi cable needs to be replaced. My video locked up and froze at very close distance. I had this happen yesterday and have been testing. I used another usb cable and it doesn’t blackout or lockup.
Does the canvas mode work in INAV?
Page 11 of latest Shark Byte User Manual (dtd August 4th) available here fatshark.helpscoutdocs.com/article/171-shark-byte states it does not
Antenna diagnostics !?!?!? 😲 I wonder what else is lurking in that update ?
More good stuff coming soon😁
Have you ever tried to change the day/night settings I can't change mine to day it's stuck on auto but every thing else works!!
I had not until your comment. I tried it out for you and mine is "stuck" on Auto as well. Perhaps send a message to FatShark as feedback? They may not know (or it may be fixed with BF 4.3?)
You'll have to do a video about it You would be the first lol but cheers for trying for us.
I'll wait for this sharkbyte wrinkles to get ironed out. Looks promising for something outside DJi 👍
@@califpv Oh, it is already! A few f/w updates already and it's only been out a few months. 2 VTXs out and another on the way. Very compatible with Betaflight & more compatible digital cameras to come💪👍Good stuff!
Just in case FS was unaware of this "apparent issue," I have notified Shark Byte dev of it
Getting harder and harder to resist, if only the RX module was a bit cheaper.
What is canvas mode ?
It alow you to have any OSD element that BF support in the last version of BF.
@@alfskaar489 Ok so its just OSD like analog. They should call it Canfinallydo mode.
@@philthayer4087 There are more to it than that it also have OSD overlay from the Vrx showing antenna strength and if it is recording to Micro SDCard or not. Bigger clearer font.
that update is not very simple
No? What do you consider difficult about it?
@@TMacFPV well for starters anytime you have to open up a command line you lose me right there.
@@MrSabram07 ok, i understand. This may help Scott ruclips.net/video/vaL8JnqfUVg/видео.html
@@TMacFPV honestly I am not trying to be a troll I've been in this hobby a little less than a year and I know just enough to kind of know what you're talking about. If you know what I mean
@@MrSabram07 no worries at all Scott. I understand. Thought the link to the video on how to use CLI might be helpful