I Paid £40 for a FAULTY Switch Lite with No Power | Let's Fix It
HTML-код
- Опубликовано: 24 июн 2022
- Huge thankyou to PCBWay to sponsoring today's video - Sign up here ▶ www.pcbway.com/ PCBWay produce reliable PCBs for customers with demanding needs. Get your quote in seconds, PCBs shipped in as fast as 1 day.
I paid £40 for this on Ebay which seemed an absolute bargain. The Ebay seller stated that it needed a new charging port however wouldn't turn on. The charging port on this was FRIED to say the least, and I had no idea what damage it had caused on the inside of the Nintendo Switch! Let's try and fix it, enjoy :)
📷 Instagram - / joeydoestech
🙋♂️ Twitter - / joeydoestech
📞 Discord - / discord
Equipment I Use Daily:
🔧 Screwdriver Set - amzn.to/30vwPxI
🔬 Microscope - Andonstar AD407 amzn.to/3mKFUtL
🧮 Multimeter - amzn.to/3x8hei4
🖊 Soldering Iron - amzn.to/3po0yCK
🟦 Soldering Mat - amzn.to/3mKLY5k
🍼 Isopropyl Alcohol (IPA) - amzn.to/3BLVDj1
🖊 Solder Sucker - amzn.to/3iKx9Os
🧮 Multimeter - amzn.to/3x8hei4
💿 USB C Amp Meter - amzn.to/3iVpltm
📷 Overhead Camera - Canon 250D amzn.to/2OOgbnD
💡 Camera Lighting - amzn.to/3mLoNI9
Use this address if you would like to send me a gift, but please don't expect anything to be returned to yourself. This is not offered as a repair service, this is only for gifts to the channel and myself:
Joey Does Tech
PO Box 1933
Southampton
SO18 9QN
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech.
#nintendoswitch #repair #microsoldering 
Наука
SPOILER ALERT
I sorted the Parental Controls 😁 Luckily as soon as I connected to the internet they were automatically taken off!
Really? How is that possible?
@@onasazi the owner takes off the parental controls using the app :)
Just discovered your channel and told my daughter to watch, because you are not afraid to show failures. Well done Joey🎉
Nice! You made Lite work of that 👍
I’ll give you a 7/10 😂
Watching your videos especially in the summer when I'm the most relaxed is a nice feeling
Awesome work! So glad to see you have some good luck with the Switch USB port this time around. You've come a long way since you started, it's motivational to see such progress. Keep it up.
Thankyou for the kind words! :)
10:08 Indeed you have!!! Awesome to watch your progression towards professionalism :-). Nice one Joey. Enjoyed it
Thankyou OB1!
When I see a port with that much damage it’s expected to have a blown chip. 😂 Nice work Joey. On my last switch charging port I decided to make some balls and added them to the pads. I feel like just tinning the pads and port just isn’t enough solder on these.
Awesome Job Joey !!!! Cant wait for the next one. When will you be going live again ?
Thanks bud :) I’ll see if I can go live tomorrow!
Nice, concise and precise repair :) Always like your upbeat vids :D
Thanks Watson :)
Wow you did it again and both ways of the USB C connector too :D wow great job m8. respect soldering at these tempratures pfffff
Thanks Virg :)
Fine job!!! Your skill is growing!) Very satisfying videos!) Thank you for that!!!
You’re welcome :)
Finally a (sortof) straightforward fix! Congratulations!
Haha and good practice :)
Wow! What an amazing Job! Port swap, dremelling, just perfect.
Thankyou Leon! :)
Great job! Highly entertaining.
Thankyou :)
Nice and clean job joey 👌
Thankyou Greg!
Nicely done Joey!
Thanks pal :)
Good work!!
Congratulations on the succesful charge port replacement great job Joey :)
Thankyou :)
Well done, Joey! 👍👍
Thankyou!
Lets go Joey !!!!! `great work - Steve & Frankie👊
Let’s goooo!
great work! I did the same job on a turquoise switch lite. But I cut the usb port screwing it on a little piece of scrap wood and using a jewelry saw (a cheap one I got on AliExpress... really works well). ;-)
Thankyou Raggi :)
GET IN! Great work
Great work as always Joey! How do you go about sorting the parental controls?
Thankyou Stu :) they came of when I connected to the internet 😂
great video Joey, have a great weekend
Thankyou bud, you too
Nice one joey nice fix :)
Cheers!
nice one joey :D very tidy
Cheers Si :)
nice work!! 💪💪🤘🤘
Thanks :)
Nice work! I think the curse has been lifted!
Hahahaha hopefully Treena!
I had 7 switch lites in a row and I used a needle file.
now I have a Aldi Dremel it's much easier.
aslong as you remove the lip on the usb c port. it will fit inside a lite case. albeit stick out slighty more. but it still looks factory.
keep up the good work.
Ah thanks for the insight! :)
love the content support from florida
Thankyou!
Great fix joey
Thanks Dak
Nice Joey!!!
I stopped using kapton tape for the most part because quite often components get lifted or moved under it, the last time it was a ribbon connector on a ps4 controller board that lifted with the tape
Yeah I think that’s the last time I’ll be using it 😂
Good trick I saw was to cut a smaller piece of the solder wick (3cm?) to allow it to get hotter, otherwise the heat will sink down the rest of the wick pretty easily.
This makes sense! Thanks for the tip :)
Keeps up ⬆️
“I’m a hot, sweaty, mess”
*cue 80s porn music*
Great Job Joey!
Who was the content creator you mention? Dakota something
Haha, The Cod3r is the creator :)
How do you think the charging port got messed up? I think someone either put the wrong cable in or someone is just very bad with plugging stuff in.
I honestly have no idea. Maybe when they plugged it in something got hooked to the inside casing, and snagged it out? That’s what I’m thinking.
I stopped using the dremmel on the port and used it to widen the slot on the case itself.. Just as easy and less risk.
Same here I just file the case a bit
Ahh good to know
I find this method abit unslighty. even using needle files it's so easy to show gaps where you have filed to much.
wicked joey do a shell swap and contact the seller to get the pin for parental controls or just try 111111like i did that might work
Controls came off after connecting to internet luckily :) I’ve actually sold this one now for not a bad price!
i paid 50 for a fully working one in bad condition with mario odessy
That's a great price! :)
@@JoeyDoesTech yeah, the only issue is the joystick is broken off but somehow works so I’m going to fix and resell soon
Hand file the port off the board. Easier
Will bare in mind bud thanks
Let’s go early