Just as an FYI, I've been able to use the bottom half of my printable vinyl again in my printer. You have to put it in the manual feed and change the paper size to the closest to the size of your scrap. Cricut always puts the cutting guide on the top left corner, so as long as you have the cutting box lined up on your mat the same way it would be if you were using a whole sheet it will work. Cricut only cares about seeing that box, it doesn't care if you have a whole sheet or not.
Just got my Explorer 2 and I'm in heaven. Thank you so much for this channel. I have learned so much since finding you. Best and most tiring 2 weeks of my life! LOL . . .
Yay!!! Enjoy it! Don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join
You guys amazes me so much.. I really don't really don't know where to start any of the project..well at least I made the Christmas tree God bless you guys always
great question! We highlt recommend the printer you get have a rear tray. it feeds heavy card stock, printable vinyl, sticker paper, magnet sheets, etc so much easier! Also the printer does need to be InkJet. Other than that, any will work! Here is the one we recommend: Canon TS9120 Printer: amzn.to/2zsSdGt
I found for any of my printable sticker vinyl or paper. Before cutting image add Ducks clear laminate over the top of the image like you would with transfer tape. Make sure not to cover the black guideline. This way it seals the ink and image last longer
I just entered the world of Cricut in December as I treated a Christmas gift to myself☺️. I bought the Cricut Joy as I didn’t need all the features for the other styles for my business. My question is am I able to buy that blade and use it in my Cricut Joy to make magnets as well?
I haven't been able to watch yet, not in a good location this morning, can you tell me where to get good magnet sheets/rolls? I don't know where to begin.
What thickness magnets did you use? I bought a package of 1mm so I'm not sure if this will ruin my blade since it's thicker than what the cricut has in the defaults
Hello! I've watched your video and purchased a deep-point blade and magnetic sheets. However, every time I try, my Cricut explore will not cut all the way through the magnetic sheet. Any tips on how to get this to work? I am using the .6mm setting just like you. Thank you!
change the cut to MORE, if that also does not fully work go into material settings and find the magnet sheet one and click edit and you can actually change how much pressure is put onti the blade
Oh no, so much printable vinyl wasted. I cut inside square with specto knife and then weed it out. So yes, you can save the rest of the sheet for another project/s. Or cut square with scissors and when ready to create an new project, tape a regular printing paper and should be good to go
Sometimes you saying “going” just no problem. Not sure why you have to say “gonna”. I get that your sit is called makers gonna learn but it is really getting old and annoying. Just say going like a normal person
💚💚Try our membership for only $1! Join now: makersgonnalearn.com/dollar-deal 💚💚
Just as an FYI, I've been able to use the bottom half of my printable vinyl again in my printer. You have to put it in the manual feed and change the paper size to the closest to the size of your scrap. Cricut always puts the cutting guide on the top left corner, so as long as you have the cutting box lined up on your mat the same way it would be if you were using a whole sheet it will work. Cricut only cares about seeing that box, it doesn't care if you have a whole sheet or not.
Thank you for watching!
This is so fun and so easy! Why I didn’t think of making magnets before? It’s genius!
Thank you for watching!
Just got my Explorer 2 and I'm in heaven. Thank you so much for this channel. I have learned so much since finding you. Best and most tiring 2 weeks of my life! LOL . . .
Thank you for watching!
Love this project with excellent start to finish tutorial. Thank you. Wishing you a super week. Hugs Susan
Thank you, Susan!
I received a Cricut Maker for Christmas! I'm super excited to start crafting! Thank you for the tutorial!
Yay!!! Enjoy it! Don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join
Tanner I Am So GLAD YOU MADE THIS VIDEO I’ve been wanting to learn how to do this THANK YOU 😊😀😀😀‼️‼️❤️‼️❤️❤️
Thank you so much for watching Crystal!
Is there a way to cut the magnet with the vinyl at the same time?
This would be great to make photo magnets for Christmas gifts
Yes! Great idea!
You guys amazes me so much.. I really don't really don't know where to start any of the project..well at least I made the Christmas tree
God bless you guys always
You're awesome, Sylvia! Practice makes perfect!
Thank you so much !
I was just thinking the other day how I could make personalized magnets, I am a magnet feign. Thanks for this it helps a lot, as always. :)
Thank you, Kimberly!
This was great and very helpful, thank you!!
Hey wish i had these products readily available in the Caribbean
Do you have a cricut maker. I'm from the Caribbean too and if so are you able to use it?
I do not have mine as yet hopefully in the next few weeks, so im researching and getting all the info i can on how to use it and projects to do
So easy...you make everything look so flawless ❤❤❤
Thank you SO much for watching and commenting!❤
Can you print on a printable photo paper, add it to the magnet paper and then cut it out instead of doing the two steps? Just wondered.
Great inspiration!
Thank you!
They are great, thx
Did y’all make a video about using printable magnet sheets?
So darn cute! Thanks for sharing!!!
Thank you for watching! ❤
Hi! Fairly new member here. Can you use Avery 8.5" x 11" sticker paper for the image?
Cute Magnet...You can load half a sheet of printable vinyl...for smaller images...I do it all the time!!
Thank you for watching!
Please tell me for print vinyl you use witch printer ?
How can I make more rigid magnets?
I don't want them to be bendable.
Dose this work for blank sublimation magnets
If I wanted to do a car magnet do you suggest I spay it with something? I don’t want the Color fade due to sun exposure.
Can you tell me what printer is the best to all papers for crafting, like printable vinyl, sticker paper, magnetic sheets, cardstock. Than you!
great question! We highlt recommend the printer you get have a rear tray. it feeds heavy card stock, printable vinyl, sticker paper, magnet sheets, etc so much easier! Also the printer does need to be InkJet. Other than that, any will work! Here is the one we recommend: Canon TS9120 Printer: amzn.to/2zsSdGt
Do you have to seal these once printed or do you add clear vinyl over the print & cut?
We recommend sealing printable vinyl BEFORE cutting it by adding a few coats of this Minwax Polyurethane Clear Satin Spray Sealer: amzn.to/3cIRSh5 .
I found for any of my printable sticker vinyl or paper. Before cutting image add Ducks clear laminate over the top of the image like you would with transfer tape. Make sure not to cover the black guideline. This way it seals the ink and image last longer
Yes I’ve been wanting this whooo hooo thank you for doing this!!! This was my request. 🤗❤️
So glad we got this video out for you! Thanks for watching!
I just entered the world of Cricut in December as I treated a Christmas gift to myself☺️. I bought the Cricut Joy as I didn’t need all the features for the other styles for my business. My question is am I able to buy that blade and use it in my Cricut Joy to make magnets as well?
Hello! Unfortunately no... The Cricut Joy is quite limiting. You cannot interchange the blades.
great video....i want to make some magnetic signs for my work van the magnetic vinyl is 0.85mm thick, will cricut be able to cut it? regards tony
I want to know what magnets you use for the car?
So do I need a ink jet printer to make magnets ? Or can I put permanent vinyl decal to the magnet
I haven't been able to watch yet, not in a good location this morning, can you tell me where to get good magnet sheets/rolls? I don't know where to begin.
Cricut has a brand if you want it printable: amzn.to/37luXaD
I need some help I wish to buy a circut which do you suggest please and were
How can I attach vinyl to a magnet if not using Cricut magnet sheets?
Which Cricut do I need to do this? What if I can't get the picture put on straight the first time? Can it be pulled back off and re do?
You can use an Explore Air 2 or a Maker :) Also, it is pretty sticky so it's tricky to peel back off, try to get it as close as possible :)
Hi can these cut self adhesive magnets?
I probably wouldn’t be able to get the picture on adhesive paper, can I pull it up and try again?
Can I make this w/ the Cricut Explore Air 2 and can I use the deep-cut blade w/ the Explore Air 2?
Yes you can! :) We love using our Explore Air 2 for so many things. The fine point blade and the deep cut blade both work amazing in the air 2.
@@MakersGonnaLearn Thanks. What's the best brand of magnet sheets that the Cricut can use? I don't wanna mess up my beautiful Cricut machine.
I just purchased a sublimation printer, would I be able to use that to print the image?
Can we print more than one image on the printable vinyl? Like instead of using one snow globe for the whole sheet, can we print let's say two?
Absolutely! Print Then Cut can be up to 6.75x9.25 inches long
What thickness magnets did you use? I bought a package of 1mm so I'm not sure if this will ruin my blade since it's thicker than what the cricut has in the defaults
Can you use this type of magnet with Permanent Vinyl instead of Print & Cut?
Sure!
Can the Cricut Joy cut through magnet sheets? Or is it too small of a machine?
Can i stick the picture on the magnet that I will only cut it ones?
Hello! I've watched your video and purchased a deep-point blade and magnetic sheets. However, every time I try, my Cricut explore will not cut all the way through the magnetic sheet. Any tips on how to get this to work? I am using the .6mm setting just like you. Thank you!
change the cut to MORE, if that also does not fully work go into material settings and find the magnet sheet one and click edit and you can actually change how much pressure is put onti the blade
Hello from Bristol UK
Thank you for watching! ❤
Where did you order the deep cut blade from ?
Here you go: amzn.to/2TgG5yS
I love your accent!!!
Is this printable vinyl stickers?
I do not have the fill/ no fill option
Where did you buy the magnet sheets?
Here you go. amzn.to/34ezUin
Cute.
Too bad I can't use printable vinyl with Android devices.
Thank you for watching! ❤
much easier to just buy printable magnet sheets
I don't like having to line them up at the end, there has to be a better way!
Sorry, but this is the most efficient way to do this! Just take it slow, practice makes perfect!
Printable magnet sheets.
Why couldn't you just use regular printer paper? tia :)
No volume
What thickness is the magnet?
Thank you for watching! ❤
Oh no, so much printable vinyl wasted. I cut inside square with specto knife and then weed it out. So yes, you can save the rest of the sheet for another project/s. Or cut square with scissors and when ready to create an new project, tape a regular printing paper and should be good to go
Sometimes you saying “going” just no problem. Not sure why you have to say “gonna”. I get that your sit is called makers gonna learn but it is really getting old and annoying. Just say going like a normal person
Sorry about that!
Can Cricut cut 1mm magnetic sheet ?
Yes, it can! :)
Any special bit ? I cut a lot of 25mm round shapes. Which model is suitable ?