How to Install Insulation | DIY Faced Insulation | Shed Build Part 13
HTML-код
- Опубликовано: 13 июл 2024
- In this video I go through my entire process of installing R13 faced insulation on the walls of my barn style shed and R19 faced insulation on the ceiling of my shed. I cover vapor barriers, rafter vents / baffles, and general how-to info for a DIYer like me. This is going to be thermal and sound insulation for my 10x16 shed studio. I'm using Johns Manville Faced Insulation. I'm in Norther New Jersey which makes a difference because of our variable climate.
Links to similar products I'm using (Amazon affiliate links):
R13 Insulation:
amzn.to/49vkGa8
R19 Insulation:
amzn.to/3I0M1oZ
Rafter Vent/ Baffles:
amzn.to/3wj5PS4
amzn.to/3OGkAEM
Owens Corning Rafter Baffles:
tinyurl.com/3k3esk76
*Disclaimer: I'm not a professional, just a seasoned DIYer. You should double check my advice, adhere to your local building codes, and get advice from a professional if needed.
@HomeDepot @owenscorning @johnsmanvillebuildinginsul773 
Хобби
Thank you so much. I doing my cabinshed. The baffles are in and now insulation time. Learned so much in a simple but effective way. Will follow your project. Bama Fishin B
Man, my hat and respect to you for this project. Amazing work ! How long did this whole project take?
Thank you. It took about 7 or 8 months but I only worked on it evenings and weekends.
If my shop turns out to be sided without house wrap (previous owners built it), what are my insulation options? Just thinking about condensation. Also, what will you be using for wall sheathing?
Shed that I'm about to install insulation on tomorrow doesnt have wrap either, so now I'm worried. Mostly insulating to cool it during hot humid summers.
Did your soffit vents warp or bent after insulation of the ceiling?
No, I didn't have a problem with that.
Ok no gable vent installs on either side of the top walls ?
Correct, there's no passive airflow into/out of the building. I may add an electric vent in the future, but I'm not sure I need it.
Is there an easy way to calculate how much to use? I have the exact same shed but 12x16 and I want to use rockwool
Each roll has a square footage per roll marked in the packaging. I calculated the square footage of my walls and ceiling and then subtracted the square footage of my windows and door. That final number told me how many square feet I would need and I went and bought that many rolls.
Home Depot also has a calculator on their site
What do you think your total cost will eventually be?
In the range of 7 to 8 thousand dollars total.
He installed teh insulation wrong. There is a 'right way' to install this stuff - there are flaps on each side of the insulation - he 'thinks' it is not necessary, but you should ask the mfg because they added those flaps on the edges for a reason.
Do not assume that some guy with a video camera knows what he/she is doing.
Same thing with the wiring. He is going to cover the wall - so leaving the wiring above the insulation to make it 'accessible' doesn't does it?
Installing it with the tabs stapled to teh studs is much easier/faster than tucking it inside the stud cavity (as he has done). the insulation is made to fit a standard stud cavity without compression.
ruclips.net/video/0XqIJ8zLqmQ/видео.htmlfeature=shared&t=19
Basically Owen COrning defers to 'the vast majority of installers' who prefer inset stapling. OC, therefore doesn't like compressing the product, but does not want to argue with 'the vast majority' of installers.
I did my 800sf barn/shop using the face stapling approach and can heat it in WINTER with speed and ease and hold that heat for a couple of hours. And, when I got through insulating the walls - several folks commented on how nice it looked - been some twelve years now and no regrets. Take teh time and do it 'right' regardless what some 'installer' tells you is easier/quicker etc. Remember - installers don't live in the spaces they insulate!
The process of insulating a shed, or any structure for that matter, is not a one-size-fits-all approach. Different methods might work better for different circumstances, depending on the specifics of the project and the person undertaking it.
While the commenter has made some valid points about the importance of correctly installing insulation and ensuring that the flaps on the sides are used as intended, it's also important to remember that there can be some room for flexibility. According to a guide from HomeTips, while stapling the flaps to the studs is a common method, the tabs can also be tucked into the stud cavity if preferred [^1^].
As for the wiring issue, it's generally recommended to place wiring in a way that doesn't interfere with the insulation. However, this doesn't necessarily mean that the wiring will be inaccessible once the wall is covered. In fact, according to a guide from the Family Handyman, wiring can often be run over the top of wall insulation [^2^].
Despite these minor discrepancies, it seems like the overall work on the shed was executed beautifully. The result, as the commenter themselves have noted, has been a well-insulated space that retains heat effectively and has garnered compliments for its appearance. This speaks volumes about the quality of the workmanship, even if some aspects of the installation were not done in the 'traditional' manner.
At the end of the day, what matters most is that the shed is effectively insulated and serves its purpose well. It's also worth noting that installers, despite not living in the spaces they insulate, are professionals who have honed their skills through experience and are likely well-versed in the nuances of insulation installation.
[^1^]: (www.hometips.com/diy-how-to/insulation-installation.html)
[^2^]: (www.familyhandyman.com/list/7-things-you-should-know-before-insulating-a-home/)