Vasily your a unique individual. Very talented at seeing a vision and bringing it together without no drawn up design. It's amazing how accurate your builds are with going off mainly your eye. Your blessed with this ability you would make a great design engineer. Keep up the great work can't wait to see this beast run.
Vasily has got to be one of if not the best RUclips builder. His skills have evolved to master level. The last few builds have been inspiring to watch to say the least.
You Are Killin' This Build. Sooo sick. These builds have come a long way and your welding/fab work has really grown exponentially. Glad to be a Patreon supporter. Good $h1t bro !!
Mentioning it again. If you want reverse look into the perc module that came on the edge snowmobiles, it shuts the engine down and runs it backwards all by a push of a button. It should be plug and play but you also need the secondary clutch that works both ways.
Pretty cool Rock Bouncer Vibe with this one man 🤨 props to you....definitely has that southern rock racing series Vibes in the front 🤔 at least to me!! Anyway ready to see more 👍
Much love man I ain't show much of it now n days but you help me belive I can create my own work with just some pipes and a welder I owe you everything
You're insanely smart👌 It looks like you just throw this shit together and it happens to workout perfectly. But we all know how intelligent you are! Absolutely blows my mind!!!!!
I really like how your videos have gradually gotten better and better! Most RUclips I feel like get to where you are then run out of steam and the quality drops with it. Keep up the great progress! I love how we have such similar ideas. Started with an r6 motor on a raptor when I was 17 back in 2010. Just wish I knew how to make videos and edit them lol
Ok before I said I was jealous of the machine but what I really ment was I'm jealous of your skill set! Heck yeah Buddy! Success is in your future! Impressive
Nice build...I see a lot of 'I'd Rather Be Welding' in your technique! Keep it up! One man...small, one horse garage & your kicking butt on Cars & Cameras! Sad for them...but, true! ...😎👍626
That front end looks awesome! Do you think you could swap out the lower control arms to be high clearance? Were you able to work any kingpin angle into it?
By the time your done nothing's going to be original on the frame anymore. You should have started from scratch. I did a similar project a few years back (but wasn't 4x4) and was a single seater. I started with a frame and ended up just junking it and building from scratch. Nice job though. Me and you have mostly the same tool setup and your right, the plasma cutter is a cheat code :)
Valisy builds got idea for ya if you think you are up for a decent challenge and pretty badass project Try to make a go or something with double or triple motorcycle engines no one on RUclips did it or thought of it but me and giving out ideas for RUclipsrs i enjoy watching will u think on it and do it reply back and love your channel bro
It's too bad you couldn't have reverse by adding an electric brushless direct drive hub motor or two to the front wheel(s)---you could also have a hybrid (at lower speeds and on takeoff) if you had a 2 way motor controller you could do both. Probably not feasible for something this big or fast I suppose.
What if the engine is idling fine and revs up but no forward or reverse? Belt looks good and the chain is fine what could be the problem? Brakes aren't seized up either...
Dude I enjoy watching your videos and it's amazing what you come up with but I'm going to try to give you some advice from someone that's been building for over 50 years and I know you do a lot with RUclips content in mind. 1st you need to get a spiral notebook 📓 to keep all your projects in. 2nd before you start a project draw or draft the the project out so you don't have to go back and cut out things you have already done to start over. I love all your projects but it seems this happens every time lol thanks for another great video 📹 👍
You are the best buddy man you are super smart 👍 man..I have been gone for a while my dog Arnold the beagle on the right side of my profile picture he got sick and I have been talking care of him and I lost him 😢 Dec 9th just before his birthday on Christmas day he would have been twelve years old 😢 I'm super lost and broken now I lost my oldest dog Bigfoot 🐕 😢 on the left twenty months ago 😢 💔 take care buddy and God bless you my friend 🙏 ❤️
This kid is a genius. Well done. Truly enjoying all your builds.
Thats the best ive ever seen a chinabuggy look like
Like to see him build a street legal trike
That front came out spicy as hell!
Vasily your a unique individual. Very talented at seeing a vision and bringing it together without no drawn up design. It's amazing how accurate your builds are with going off mainly your eye. Your blessed with this ability you would make a great design engineer. Keep up the great work can't wait to see this beast run.
I’ve been watching your vids since before your bad wreck. Impressed with your drive and fab skills ever since. Great job man 💪🏻
Cars and Cameras should watch your work! This is how to build something that will not break! And it also looks good. Great work!
Vasily has got to be one of if not the best RUclips builder. His skills have evolved to master level. The last few builds have been inspiring to watch to say the least.
You, sir, are my favorite builder on RUclips
Vasily is the man!! Fixing Porsches and all!!!
You Are Killin' This Build. Sooo sick. These builds have come a long way and your welding/fab work has really grown exponentially. Glad to be a Patreon supporter. Good $h1t bro !!
thank you!
There's no original buggy left. You did build your own buggy dude and made a fantastic job of it.
Love the nose design. Glad you're looking into the PERC!
The front end looks Like a rock bouncer killer man
The front end looks awesome man, beautifully done cant wait to see the finished product!!
Such a feast for the eyes! Super nice progress Vasily! 😍
Hope you keep those tires they look sick 💪🏾💪🏾
Mentioning it again. If you want reverse look into the perc module that came on the edge snowmobiles, it shuts the engine down and runs it backwards all by a push of a button. It should be plug and play but you also need the secondary clutch that works both ways.
Yep that's the plan
He literally talked about it in the video lol
@@hammeredtravis someone didnt watch the whole video lol
I wonder if that would destroy the engine because the bearings are only meant to go one direction
Mercury had a couple outboards that had reverse that way. Direct reverse they nicknamed em dock busters
Might be my favorite one you’ve done so far.
you cease to amaze me man. Been a fan for such a LONG time and your builds just get better and better!
Looks great! I love this build and the Monster Murray Mower too
Your fab skills get better all the time, i couldn't imagine if you had more equipment for fabrication what you could build.
Sick build man, loving the content 🙌
the buggy is looking sweet. great stuff thanks
Pretty cool Rock Bouncer Vibe with this one man 🤨 props to you....definitely has that southern rock racing series Vibes in the front 🤔 at least to me!! Anyway ready to see more 👍
Dude Is amazingggg definitely my favorite RUclipsr
Man!!!! Your fab skills are really coming along .
Should start selling parts, tabs etc for others that want to convert Chinese buggies.
Looks sweet! The front kinda looks like a can am maverick
This thing is going to be sick coming along great. Can’t wait to see it rip. Keep up the great work dude.👍🏼🤩❤️
Been watching you for ever and I'm so proud of you !! Holy shit your killing it !
Thanks you!
Jesus that looks insane from the front. So sick man. Great job.
Much love man I ain't show much of it now n days but you help me belive I can create my own work with just some pipes and a welder I owe you everything
Now it just needs a bad a$$ front bumper and LED light bar! Excited to see it rippen!!! Brawwp brawwwwp
Frankenbuggy (god rest it’s soul) would be proud.
Nice build Vasily! You could dremel the ball joints on the sides a bid to gain some inches of travel.
Bro that front end look professional,gona be sick this 😎can’t wait
Really like the look of the changed front end.
Coming along perfect , nice work 👍🏽
Great fab work it’s looking really good man!
Might have a baby diff but you’re a hell of a mechanic
front end looks sick
That’s awesome. Love the videos. Keep up the great work
I have been watching u from the beginining, i wish u would put out longer videos bro. You have such good talent.
I appreciate that
Maneee it's coming along well 🔥front looks killer
You're insanely smart👌 It looks like you just throw this shit together and it happens to workout perfectly. But we all know how intelligent you are! Absolutely blows my mind!!!!!
You really should lower the front part of the roll cage. It would look so much better. But I’m a big fan either way. 😎
I really like how your videos have gradually gotten better and better! Most RUclips I feel like get to where you are then run out of steam and the quality drops with it. Keep up the great progress! I love how we have such similar ideas. Started with an r6 motor on a raptor when I was 17 back in 2010. Just wish I knew how to make videos and edit them lol
Nice work keep up the good work
This is so dope
You are a bad ass man! If you are ever in Las Vegas and need a go kart buddy just let me know. Haha keep up the awesome fab work and videos.
Can't wait to see you rip this thing offroad.
Looking great. Yeah the plasma cutter is awesome, you should be wearing your welding helmet though since the uv light will damage your eyes…
Ok before I said I was jealous of the machine but what I really ment was I'm jealous of your skill set!
Heck yeah Buddy!
Success is in your future!
Impressive
Amazing fabrication!
You do nice work Vasily ...
This is dope as hell keep up the hard work!!
Springs changed color. Switched them out or painted?
Looking sweet man !
Badass jacket.The DRAGON !!!
Good stuff, as usual!
You're the man!!! Please keep up the great work!! I love everything you do!! You build what I love!!
Nice build...I see a lot of 'I'd Rather Be Welding' in your technique! Keep it up!
One man...small, one horse garage & your kicking butt on Cars & Cameras! Sad for them...but, true! ...😎👍626
that thing is sick
Looks sick man
This is going to be a nice buggy when it's done
Awesome cart!!! Love your channel. Your a great fabricator.
nice work ---and great video ---keep up the good work
I think it will be very good, the bugs are usually all the same.
Maximum Respekt your builds are amazing 👍
That front end looks awesome! Do you think you could swap out the lower control arms to be high clearance? Were you able to work any kingpin angle into it?
Direct drive or gear the engine for tight engagement reduction
There's nothing more badass than welding on top of an acetone can lol. Great work all around!
Found you via the c boys! Subscribed and hit that bell!! Love you content, can’t wait to see the grom
Appreciate it!!
Excellent stuff Man U do some cool stuff looking forward to the hyabusa jet boat did u ever get the engine working?
Its addicting!..me..agree 💯
Great build 👌🏼
Really looking good 👍
By the time your done nothing's going to be original on the frame anymore. You should have started from scratch. I did a similar project a few years back (but wasn't 4x4) and was a single seater. I started with a frame and ended up just junking it and building from scratch. Nice job though. Me and you have mostly the same tool setup and your right, the plasma cutter is a cheat code :)
Отлично! Машина будет как монстр👹
Valisy builds got idea for ya if you think you are up for a decent challenge and pretty badass project
Try to make a go or something with double or triple motorcycle engines no one on RUclips did it or thought of it but me and giving out ideas for RUclipsrs i enjoy watching will u think on it and do it reply back and love your channel bro
Looking awesome 👌
Tell your cameraman to focus on the front suspension when you jump up and down on it, and not your backside lol🤣
It's too bad you couldn't have reverse by adding an electric brushless direct drive hub motor or two to the front wheel(s)---you could also have a hybrid (at lower speeds and on takeoff) if you had a 2 way motor controller you could do both. Probably not feasible for something this big or fast I suppose.
How long are your front axles?? I got a artic cat 300 4x4 ATV that I'm going to use for my off road go kart.. and it's a Chinese buggy 2..
like your vids alot! what about hooking up with grind hard, ratherBwelding and redbeard for a build off and some adventures !
for reverse gearing you could take an electric car starter motor.
What if the engine is idling fine and revs up but no forward or reverse? Belt looks good and the chain is fine what could be the problem? Brakes aren't seized up either...
What size pipe are you using on the chassis? I'm thinking about doing something like this.
Cover your axel boots dang Bobby!
Dude I enjoy watching your videos and it's amazing what you come up with but I'm going to try to give you some advice from someone that's been building for over 50 years and I know you do a lot with RUclips content in mind. 1st you need to get a spiral notebook 📓 to keep all your projects in. 2nd before you start a project draw or draft the the project out so you don't have to go back and cut out things you have already done to start over. I love all your projects but it seems this happens every time lol thanks for another great video 📹 👍
Waiting for the 4 wheel stear Chinese buggy
Nice job
You should do a 2wd 4wd system
You are the best buddy man you are super smart 👍 man..I have been gone for a while my dog Arnold the beagle on the right side of my profile picture he got sick and I have been talking care of him and I lost him 😢 Dec 9th just before his birthday on Christmas day he would have been twelve years old 😢 I'm super lost and broken now I lost my oldest dog Bigfoot 🐕 😢 on the left twenty months ago 😢 💔 take care buddy and God bless you my friend 🙏 ❤️
You should do the rear arms like on can-am x3... will have much better ride
It will work good man
nice job
Hey Vasily, it's cool to see you nerding out on suspension geometry. BTW, have you ever considered using pushrod suspension on a project?
When I get a lathe and plasma table
Not if, but when. hehe 😎
I just fixed a bent rear axle on one of these
Where this diff was originaly mounted?
Jesse James makes damascus guns.
You, rather B, and GHPC, need to collab on a single radical project.
Sick ASF