Brushless Capra Axe 2300kv
HTML-код
- Опубликовано: 30 июл 2024
- I'm really happy with the power of the Axe, gotta get used to it a bit. Ebay and Amazon links below
Hobbywing Axe 2300
Amazon amzn.to/2MT53ls
ebay rover.ebay.com/rover/1/711-53...
Amazon amzn.to/2MT53ls
Capra
Amazon amzn.to/2MYdTyt
Ebay rover.ebay.com/rover/1/711-53...
Ottsix www.ottsix.com/voodoo-klr
Ottsix 2.2 KLR's www.ottsix.com/product-page/2...
KLR on Ebay rover.ebay.com/rover/1/711-53...
Jconcepts BogHog Body
rover.ebay.com/rover/1/711-53...
Holmes Hobbies holmeshobbies.com/
Holmes Crawlmaster Sport 540 5-slot
holmeshobbies.com/motors/brus...
Holmes BRXL esc
holmeshobbies.com/electronics...
New Firmware, may have to turn off virus protection but this will replace your current castlelink program, don’t worry all your normal castle stuff will still link up fine
www.dropbox.com/s/jmbgd4s9sd7...
Axial Capra and parts and pieces on Ebay
rover.ebay.com/rover/1/711-53...
Reefs RC reefsrc.com/store
Reefs RC 444 Servo
reefsrc.com/store/p_29718/tri...
Reefs 99 Micro servo
www.amainhobbies.com/reefs-rc...
Reefs on Ebay
Reefs 444
rover.ebay.com/rover/1/711-53...
Reefs 99 Micro
rover.ebay.com/rover/1/711-53...
#capra #hobbywing #axe #2300 Развлечения
You should make T-shirts with the phrase “take a look”
Rc 4 Life LoL I have a teespring account you can see below but I really should make that one.
Dude yes defenite buy for me if you release this ahah
Looked like fun, you adding to the crawl course👍👍
The capra took that brushless system like a champ
The Capra looked like a moon buggy with those soft landings. 😊
Sweet! The slo-mo sand slinging was awesome!
The capra axe does it again, it's really the king of the hill I think, you had it running a bit fast but it made it look easy.😀😀😀
Man I could do that all day can't wait to get one lol looks so fun.
The tire look and work great!
awesome bro, your really giving them gears a workout!!
Yeah I had a CC 2850 slate and it was just awesome with 2.2 tires.....looking good ..yall got got some skills also
Looks like the axe system does pretty good in it. I'm looking to get a Capra kit and putting my 1800kv axe system that was in my trx4 bronco into since it just seemed like it didnt have enough top end in the bronco for me. It almost looks like it will be just perfect to have a 1800 in the Capra with stock gearing.
I like what u did to the capra thats awsome
I like it. If you went to 11t I recon it would be a rock weapon! 😎
That was quick,nice response👍👍
James Swift LoL you must have seen the first version LoL.
I can't decide what motor to do in my Capra kit, mostly for crawler but I don't want it to be 5mph. This system looks good
I think the key to these vids, just get a Capra. No matter the conbo, it looks like a blast to drive. Can't wait to get mine.
You have a new subscriber 👍👍
the axe puts a lil zap in it! been pushing around doing a brushless system in my class 1 scx10 2
I totally agree. I think the Holmes team puller 400 13t will be the bees knees in the Capra. I will be pairing it with the Br-xl in my build. Thanks for showing us the axe system in this rig though.
I have a puller 400 13t in my Superlite Axial and its a bit small, may have heat issues with this one. When I do the magnum I'll do an 11 turn version, that should give the crawl and bounce power I want.
Looked like a fun day lol.
Love the video. I just picked up a Capra. Was wondering about battery choices and associated run times. I also looking at going brushless soon.
I usually just run a 1500mah Helios 3S in mine. You can fit a 3700mah Gens Ace and Helios has a better specificly for the Capra now, it’s a 3600mah. Runtime is awesome.
I have same setup with the 11t pinion and it's perfect balance of torque, speed n control.
Don Earls just curious what 11t pinion you used. I just picked up a axe system but I’m not liking the pinion I got. Thanks
@@bradlycruse73 I dont remember exactly, it was either from axial or hot racing
Hi Exo. Thank you for your vids. Is there enough space in the capra for the AXE Combo? Its a big ESC. Did you have to rework something? Cheers...
Hey I’m pretty new to this RC crawling stuff but am diving right in. I got the Capra RTR and am going through the upgrades and want to get the AXE 540L 2800kv. Few questions. Should I buy the motor/ESC combo first or a new transmitter? Is a new transmitter required for it or can it bind to the stock one? And last, will that fit? The 540 cans will squeeze into the Capra right? With out trimming the link mounting points off? Anyway thanks for all your info you put up brother. Happy trails and keep on truckin’ lol
Thank You!! :-)
Any photos of the link clearence work you did?
I’m trying to get mine to fit, but the rod end from the link appears be hit the motor, Ive trimmed the link mount a good amount already
@exocaged rc Happy holidays! Just got a build kit Capra and wanted to get a recommendation for servo esc and motor. I want some speed but still be able to crawl. Let me know and I’ll use your links as well. Thanks
Sweet! I run mine with the Axe 2300kv on 3s... stock gearing too, and I agree, smaller pinion is nice... but the Axe system is still verrrrrrry smooth.... so I haven't changed it. Then again, I've run mine into a rock and flipped it over backward while bashing... so I'm going to leave it as is. lol! It is now dual purpose... crawler and rock racer.
TrailCrawler 203 sounds like with good trigger control the AXE will work great with 3S and stock gearing...
@@sik05civic Yup! I will not be changing it.
TrailCrawler 203 your motor didn’t over heat with the stock gearing? Thanks
@@bradlycruse73 Not once.
TrailCrawler 203 nice to know. I’ll be installing my axe 2300 this weekend. How does it crawl with the stock pinion?
fan friggin tastic!!
I have a Holmes Puller Pro BL 540S "Stubby" 2200kv and went down to an 11t pinion and it works well. I was thinking of going to a 10t or maybe adding the overdrive you did to the front diff.
Alvin Marin the OD was a waste, rumors are a set of OD portal gears are on the way, at that time it may work really well. As far as the pinion goes 11t is as small as I have been able to fit. Vitavon is working on a new billet trans case that can go to 9t. It won’t be cheap but will be top shelf quality.
@@ExocagedRC Portal gears would be nice. Yeah, I've heard a 10t was possible using button head screws to mount the motor.
Love the AXE system, just wish I could afford one at mo.
I have been saving for one myself. Might be able to swing it next month!
Same!
@@justinwood61 I have a 3300kv now
Nice capra.
Thank.
Have you had any problems with the slipper clutch slipping?
My Axe 3300 550 motor keeps overheating in trx4. ESC is fine. Motor keeps doing thermal shutdown. No binding in drive line. Stock pinion. Does the 3300 just run too hot due to higher KV's?
J R the bigger 550 Axe motors do run a bit warm as compared to the other ones. If it’s hitting thermal and shutting down that’s an issue. The motor comes with a 12t pinion and should be set in the D hole for proper mesh. Also if you’re crawling in 2nd that can be an issue. Does the truck roll freely? Any driveline bind?
Definitely needs a smaller pinion if u were to keep that combo.
For my heavy scale trucks I tend to go with a basic 4pole brushless around 3000kv but geared down further than normal.
One truck has 2600kv, hpi gear reduction unit, axial transmission, and hd under drive in both axles. Has a super nice low speed. And tons of torque despite being a full steel subzero rc4wd cage and metal wraith axles. Lol
100% agree
That dirt looks like sand to me. What's your plan for it or is that to be unveiled later?
i was thinking of starting at 50 wt oil in my capra shocks. lets see how that goes.
should be really good at that weight
Niiiceee 🤙🏼 What suspension do u like running on your crawler rigs?
RC Migs Channel depends on the vehicle, some I like them to move faster than others. But 4-link with coil overs.
I have same system and everything but my motor keeps getting really hot, any idea what it is?
If you have a lot of OD in the portals that can cause it. If you’re driving in sandy terrain and other muddy stuff or lots of hills that can do it.
Does anyone know how the axe 1800kv will do in the capra? Im about to install.
Shaun Sanford yeah I haven’t run one in mine yet but awesome torque and control for sure. It will just be loud. Probably go with an 11t pinion or maybe try the stock one. Which esc? SW4?
What is your opinion on a good all around crawler/basher fun rig? Capra or Losi Rock Rey?
Tough one but I’d go with the Losi.
@@ExocagedRC Appreciate it... Love your channel!!
@@ExocagedRC Problem is, while I was waiting, my impatience got the best of me and got the Capra. The dig servo burnt up literally 5 minutes in to trying out the rig. Didn't even use the dig and the shocks I got were crap too... 😩
Just thought I’d tell ya I squeezed in a HW 2700 “550”! In my Capra. Ya, it’s awesome! And “There it was!”
Eric Schmidt holy cow you got pics posted anywhere? I’d like to see that!
Exocaged RC I’ll have to find a way to get you some pics of it. It’s a tight fit and well, we will just have to see if it breaks my link mount. After last nights crawl o don’t think it’s a problem.
Who needs a tractor to spred your piles of sand when you have a fast rc car
Great vids! I tried a castle 4600kv brushless motor (sensorless) in my Capra....its horrible lol. Too fast!!
lol oh wow!!! yeah that would be a whole lot of too much. I see guys posting about the 3800kv and I just don't see this thing needing that much speed unless they are racing it or bouncing it.
Kinda fun my butt. Looks like blast.
Oh come on bud I like the first cut better lol. We all have those type around us everywhere you go!
lol man I had to get that out of there, community strikes can happen but yeah it gets a bit frustrating recording things sometimes.
Exocaged RC I hear ya an understand 100%, I just found it entertaining an glad I’m not the only one who feels like that from time to time lol
Anyhow, Enjoy your channel keep doin what you do man. 👍🏻
@@shaunburks169 thank you
"Took a look..." Too much power. Going with the CrawlMaster Pro 16T here.
lol I'm going to have to make that a thing. I had the CM Sport 13t in there and it was good for sure but when I do the Magnum I'll go with the 11t version.
@@ExocagedRC Already have an 11T pinion. Going to 10T...LOL
Bill Deras I haven’t been able to fit a 10 in mine and have it be even a little bit close enough to work. Vitavon is working on a billet trans case that will go to 9t.
@@ExocagedRC Kewl about Vitavon...Will watch for that!
@@ExocagedRC After you said that you haven't been able to use a 10T pinion on your Capra, I took mine with the 11T apart to take a look. Was going to extend the motor screw slots and take some material off of the motor side of the motor mount plate to make the 10T work. But, came up with a solution that was sooooooooooo simple. On my Holmes CrawlMaster Expert 540 (16T) there are two sets of screw holes opposite each other on the can. Instead of using two screw holes opposite each other (as conventional wisdom would dictate), I used the two screw holes located to one side (making them furthest from the centerline of the tranny). This made the 10T fit with a proper amount of gear lash when I pushed the motor all the way to hitting the tranny body on the other side of the motor mounting plate. And, if I were to Dremel away a little bit of plastic from the motor side, I am believing that I could even move the motor over enough to fit a 9T pinion. Hope this is understandable. Works great without a lot of effort! Bill
CAPRA NEEDS PADDLE TIRES AND MORE SAND 😁
Jonathan Hawkins yep gonna happen
Ahh my bf video is here
I initially considered the AXE...but, decided against it, primarily for to it's (well-known) poor "slow start" ability.
Gear mesh doesn't seem good
Jeremy Burris yeah sounds horrible in the video but not bad in person. It also is all steel pinion and spur.