Flip those Axles! Watched the whole thing. Nice build. Thanx for the shoutout. Built 2 TRX6(M)s kits while I watched so we were both productive today, Cheers.
Flip those Portals! Great build Ken! Love the running footage! Red-Rocks is my favorite place to run these guys! Thanks for the video and great coverage on the build! You Da Man!
The flipped hubs is definitely on my to do list. I just got my first rc as an adult. Cr18p evo rock van. I've cut the body out for bigger tires, flipped the steering linkage to the bottom of the servo arm and installed a furitek micro komodo brushless with there stinger kit. It actually drifts but flips if I turn too hard, where the hub flip is coming in handy. Going 3s soon and maybe try to convert to the lgrp billet mr24 transmission with the 30 something %overdrive and the 20 percent overdrive portal gears
Flip those portals! Epic build my dude! Yea there’s always gonna be haters for every build. But who cares what they say. You build what you like because they’re not paying for it. Sure if they fully sponsor a build then they got say but nope they’re not. Do what you love my guy. Love the vids!
Never done😂 thats an understatement. Thanks for bringing us along. Really love the looks of these chassis. Really love a low slung ride like this. Great watching something a little different flipping the axles really drew me in.
Awesome build! Thanks for your time. Would this chassis, or even the injora tarantula work (width wise) with the fms Fcx24? I would just cut the frame rails of the fxc off where the belly/skid/links are at, and mod whatever. The width there would just need to be close. Thanks again! Really pumped for this vid. 👍🏻
Awesome! That’s what I have, so that’s all I got. Maybe I’ll go ahead and order one up. Great price! I have 70 claws coming too. I’ll be chomping at the bit for that vid when/if you do it. Thanks much for the reply. 👍🏻
So I got my tarantula chassis today (trx4m size) , I measured the fcx24 belly width and it’s spot on! Also the stock fcx24 upper link bolts are almost 100% on with the chassis’s belly holes! Maybe A little modding the chassis servo area and it will be an easy swap. Obviously this means the ripper chassis (trx4m) will be the same, I have that chassis coming as well. So pumped for this. All three fcx’s will be swapped over to this setup. and my monster truck tires look to clear the tarantula tubes too, so the 70mm tires coming should clear. Chomping at the bit for you to make a vid about it. Sorry for the long message… just pretty excited. Thanks again for the videos and your time! 👍🏻
HAHA! I build what I like. I have a clearance V1 chassis to mess with. What really are the differences? I have an FCX24 drive train to toss in lying around. I'll flip those portals too.
Flip those Axles! Watched the whole thing. Nice build. Thanx for the shoutout. Built 2 TRX6(M)s kits while I watched so we were both productive today, Cheers.
Huge thanks. Your product helps push this to the next level of awesome!!!
Flip those Portals! Great build Ken! Love the running footage! Red-Rocks is my favorite place to run these guys! Thanks for the video and great coverage on the build! You Da Man!
Huge thanks for the watch my guy!!! I also love Red Rocks. I just need to get out there more.
The flipped hubs is definitely on my to do list. I just got my first rc as an adult. Cr18p evo rock van. I've cut the body out for bigger tires, flipped the steering linkage to the bottom of the servo arm and installed a furitek micro komodo brushless with there stinger kit. It actually drifts but flips if I turn too hard, where the hub flip is coming in handy. Going 3s soon and maybe try to convert to the lgrp billet mr24 transmission with the 30 something %overdrive and the 20 percent overdrive portal gears
Nice! I get a lot of comments on this build. (Positive and negative)
Thank you for sharing your craft my friend.
Thank you! Cheers!
Flip those portals! Epic build my dude! Yea there’s always gonna be haters for every build. But who cares what they say. You build what you like because they’re not paying for it. Sure if they fully sponsor a build then they got say but nope they’re not. Do what you love my guy. Love the vids!
100%!!! Thanks a ton for the watch ;)
Never done😂 thats an understatement. Thanks for bringing us along. Really love the looks of these chassis. Really love a low slung ride like this. Great watching something a little different flipping the axles really drew me in.
Glad you enjoyed!!! We try to do fun things every once in a while.
Definitely one the best builds I’ve seen. I’ll be watching the drive sequence over and over again 🤘fantastic!!
Oh man! Thanks for that awesome Comment. Some absolutely hate it, and some love it. Obviously, I love it too.
Thats a cool idea to invert portals and do something different.
Im making a 2wd TRX4M for max speed as an experiment.
Thanks! a 2wd trx4m would be fun!
Can’t wait to turn those plastic links into spaghetti with the brushless motor
We don’t bash it! Lol. Also, the plastic links are pretty durable. Maybe we will get some @RCSteve links.
Nice build, that put it low,awesome crawling,love the stance and look!!!
Thanks, it’s a fun one for sure.
Killer build dude, got to get working on my aluminum ripper number 122 one of a kind all red Christmas present from Jim Wolf
NICE dude! Awesome of jim to get you that work of art. they are beautiful!
I just ordered the skid from opai factory over on etsy. I currently have a 66g beass skid but would honestly prefer clearance over all that weight.
You don’t want brass skid anyway. Brass sticks to rocks. Also, it’s sprung weight. You want all sprung weight as light as possible.
Yessir. Im glad i ordered it. Oppai factory said they made some provisions since this video too.
Great build. I like the look and stance.
I love the low aggressive stance for sure!!! Even if I end up dragging axles.
Looking pretty stinking freaking sweet 👍👍😎
Thanks a ton for watching Andrew!
Nice build and place to run and test.I love running the red sandstone
Thanks a ton! I hope we earned your sub!!
Great video, love all your tips
Thanks a ton for the watch. I hope they helped!
Wow what a awesome playground love it
So beautiful
those axles are upside down. geez...whats wrong with mini crawler guys? LOLZZZZZZZZZ did i do that right ken? hahaha
Killer rig man
These Mini Crawler Guys :::rolls eyes:::
Awesome build! Thanks for your time. Would this chassis, or even the injora tarantula work (width wise) with the fms Fcx24? I would just cut the frame rails of the fxc off where the
belly/skid/links are at, and mod whatever. The width there would just need to be close. Thanks again! Really pumped for this vid. 👍🏻
It takes some work but I think I’ll be doing this next. ;)
Awesome! That’s what I have, so that’s all I got. Maybe I’ll go ahead and order one up. Great price! I have 70 claws coming too. I’ll be chomping at the bit for that vid when/if you do it. Thanks much for the reply. 👍🏻
Well, I had $20 amazon rewards points so, ORDERED! 🎉. 2 day delivery too. Cheers!
So I got my tarantula chassis today (trx4m size) , I measured the fcx24 belly width and it’s spot on! Also the stock fcx24 upper link bolts are almost 100% on with the chassis’s belly holes! Maybe A little modding the chassis servo area and it will be an easy swap. Obviously this means the ripper chassis (trx4m) will be the same, I have that chassis coming as well. So pumped for this. All three fcx’s will be swapped over to this setup. and my monster truck tires look to clear the tarantula tubes too, so the 70mm tires coming should clear. Chomping at the bit for you to make a vid about it. Sorry for the long message… just pretty excited. Thanks again for the videos and your time! 👍🏻
Nice!! That is super awesome to hear! I am loving the FCX platform.
Im interested in the skid plate but worried about how close my venom/micro komodo motor would be to the bottom of the hood area.
You can see we got it to fit.
Im halfway through the video so far but this build is looking sick.
Thanks a ton.
HAHA! I build what I like. I have a clearance V1 chassis to mess with. What really are the differences? I have an FCX24 drive train to toss in lying around. I'll flip those portals too.
Nice! Mainly just material. 3d printed vs injection molded.
Trying to understand why the flipped portals? So you can be low cg and hang up on everything?
I guess you didn’t watch the whole video.
Almost 10 years since I got to wheel that spot.
Come run it again!!!
What length shocks did you get ?
They are the nexx racing TRX4M oilfilled shocks. I also have a review of them on the channel.
Flip those portals! 😂
Flippem real good!
FLIP THOSE PORTALS!!!
Hell yah!!! Thanks for the watch!
Why does the chassis look metal when u were done with it?
Chrome paint.
I wish in your videos if you can in the future. Can you talk about, STUFF ?? I feel your videos lack the discussions of STUFF . Lol
Hmmm. I can probably discuss more stuff.
This build is awesome. But seriously I need this lightbar in my life. Who has a link to it?
Try amzn.to/3FXdkQj
If you make it a little bit wider on the flat I don’t think it will hit anything
Making it wider will make it hit more.