Awesome vids my man. My 08 XTX does nothing when I shift gears. Ran fine, parked it, next time no power to wheels. Motor runs but gear shift changes nothing. Any common issues?
Foe the xtx clutch that you took out, i assume the slip is cause by that shaft seperating as it spins? If thats the case, you think a guy could just put a weld the two sides together, basically making it one shaft?
That might work temporarily. My guess it is will be very short term, then you'll be buying these parts and the main shaft. Let me know what you figure out. If you just want to fix it right use DISCOUNT Code: MNMSAVE10 to save $$$$$ www.ebay.com/itm/234192100101
@@MidNebraskaMotorsports Hey, thanks for the reply. I ended up just cleaning everything up really good and then switching to a friction modified gear oil and seems to do the trick.
Hello, I have a 08 prowler 650 xt. There is a clatter in the rear end once you let off the throttle. What should I look for? Any help would be appreciated. Thank You.
I'd start by draining the oil in the rear diff. If you have particles then I'd tear into the rear end. Boots good on the drive axles? Here is a link to the parts I'm guessing you'll need. www.ebay.com/itm/234192100101
If you order the kit you will get the right sized axles. Some people order just the gear hoping that their axles will fit......they WONT. You have to buy the axle for the gear. Thanks for watching and the question! www.ebay.com/itm/234192100101
Not sure which axles you are looking at but they are different. Thanks for watching. Here is a direct link for the kit you need: www.ebay.com/itm/234192100101 Let us know if you need anything else.
I’m a little unsure what you are saying here but you should buy this kit. I bet it’ll fix it. If you need more helpful tips, check out: ruclips.net/video/X0AdFxkJiOg/видео.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
When you are underneath a SxS, it's hard to talk and work and get a good camera angle. I thought I stay out of the way and just go through the complete process. Thanks for watching anyway!!
I just did the same conversion my 09 Arctic Cat Prowler CV axles from a XT or Too Short
No not yet I will check them out.
Awesome vids my man. My 08 XTX does nothing when I shift gears. Ran fine, parked it, next time no power to wheels. Motor runs but gear shift changes nothing. Any common issues?
I'm thinking a belt issue. Mice could have gotten in the clutch area and caused all kinds of issues. Thanks for watching. Let me know what you find.
Foe the xtx clutch that you took out, i assume the slip is cause by that shaft seperating as it spins? If thats the case, you think a guy could just put a weld the two sides together, basically making it one shaft?
That might work temporarily. My guess it is will be very short term, then you'll be buying these parts and the main shaft. Let me know what you figure out. If you just want to fix it right use DISCOUNT Code: MNMSAVE10 to save $$$$$ www.ebay.com/itm/234192100101
@@MidNebraskaMotorsports
Hey, thanks for the reply. I ended up just cleaning everything up really good and then switching to a friction modified gear oil and seems to do the trick.
What are the torque specs for the bolts on the cover?
Do u have a video of old one?
Hello, I have a 08 prowler 650 xt. There is a clatter in the rear end once you let off the throttle. What should I look for? Any help would be appreciated. Thank You.
I'd start by draining the oil in the rear diff. If you have particles then I'd tear into the rear end. Boots good on the drive axles? Here is a link to the parts I'm guessing you'll need. www.ebay.com/itm/234192100101
By changing out the rear ring gear, do you need to do the same for the front gear for 4X$ applications?
Nope, you don't have to do a thing with the front. Thanks for watching. I have the kit link posted.
Hi I have a 2011 artic cat 700 hdx it hydro locks when trying to start?
Low charge on the battery? Let me know what you find!
If I order these parts through you, will they be the right length axles?
If you order the kit you will get the right sized axles. Some people order just the gear hoping that their axles will fit......they WONT. You have to buy the axle for the gear. Thanks for watching and the question! www.ebay.com/itm/234192100101
@@MidNebraskaMotorsports
Will a 0214-1572 axle kit fit the gear.
What did that end up costing you? Where do you get parts?
Prices have gone up since I have posted this video. Thanks for watching.
Awesome video thanks
Heck yea Jackson. Thanks for watching. Let me know if you have any questions. I have the kit I used posted in the description.
Hey I have the prowler xtx 700 I've ordered axles but they are to small for my differential did you say I need the xt axles and not the xtx axles?
Here is a direct link to what you need. Thanks for the question and for watching! www.ebay.com/itm/234192100101
Thanks
I've got a 2010 prowler 550 with this exact problem, can someone give me a link to the exact ring gear and axles I need to do this swap?
I posted a link in the description to the kit. Thanks for watching!! Let me if you need anything else! Hit the subscribe button if you get a chance.
I have a 08 prowler 700 xtx. Cost? Where do you get parts from ?
Check out my eBay store at stores.ebay.com/midnebraskamotorsports
here is a direct link to the parts. Thanks for watching. www.ebay.com/itm/234192100101
Just wondering but why does it say when I want to order the axle it says for xt and xtx model
Not sure which axles you are looking at but they are different. Thanks for watching. Here is a direct link for the kit you need: www.ebay.com/itm/234192100101 Let us know if you need anything else.
2008 Arctic Cat Prowler 700 before after 3 seconds run and instant let the gas free and stop in seconds that was before now stay in neutral only.
I’m a little unsure what you are saying here but you should buy this kit. I bet it’ll fix it. If you need more helpful tips, check out: ruclips.net/video/X0AdFxkJiOg/видео.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
All talk but never did anything.
When you are underneath a SxS, it's hard to talk and work and get a good camera angle. I thought I stay out of the way and just go through the complete process. Thanks for watching anyway!!
Worse videos! You show it torn down first?
you idiot