Kid, I am a retired electrical engineer. I was also an electronics technician for 10 years. I have wired many solar systems as well as designed and constructed many electronic panels.. I can say that EVEN I would have a hard time doing as well as you did. I carefully watched your video and you did it all right, the safe way and you can be proud of what you did. It is rare to see a hobbyist or a DIY person with the experience that you have. I would like to ask you: Did you have a professional helping you do/produce this project?? If yes, good job. If not, GREAT Job.. Either way, a first class job. This is one of the best videos I have seen
This is absolutely fantastic! The workmanship you put into that system is top-notch. I'm particularly excited to see the detail you put into the 'how to connect to the starting battery of a Promaster' section on this build. I have not seen that part documented on a promaster as clearly as you showed in this video and I'll definitely be referring people to that section specifically when I get asked about that topic. Well done!
Thank you so much! The EXPLORIST.Life wiring kits made this project a breeze. Every van DIYer will benefit greatly from your resources and product offerings😄
yes wow i'm just starting to watch this video right now and already interested/excited to see the entire thing, even tho i've been finished with my Promaster's electrics for almost two years now... :)
From the other end of the world, I am amazed with such talent and so detailed project you've done. You need to be proud that a lot of people are following your steps. I loved how your hands looked during installation. Wish you good luck
Best video I’ve seen explaining every step of how to install a complete Victron power system. Lauren has the gift of taking a complicated, technical project and making it understandable.
Lauren, this was a MIC Drop Video. You gave me the confidence to give this a try on my own. I'm at the beginning of my Van Search, but it will be a ProMaster. The knowledge that you have provided for non-professionals is just immeasurable. The only thing I would do differently is hire an electrician to check my work before I flip the switch.
Wow what a life saver you are! I can’t believe I hadn’t found you before. Im trying to finally convert a van but Im planing everything first and this video just gave me the confidence into doing this part myself, you explained everything so well, I am finally understanding how everything goes. Thank you so much for doing this. ❤
Just watched this for the 3rd time. I think I love you. LOL you are freaking awesome. Keep spitting out content. Awesome delivery, scene planning etc. So well done.
I’m a nerd for instructional videos and I’ve been an avid RUclips self learner for over a decade. Hands-down this is the absolute best, most thorough and comprehensive, organized and helpful instructional video I have ever seen; on any subject anywhere. I have no idea what your career involves, but you are a brilliant instructor. Much like myself, you leave no stone unturned in your explanation. I can really appreciate that and I can say also that very few people are able to accomplish that level of clarity. I’m not a pro master or a sprinter person. I’m still good with my 87 Westfalia, nonetheless I was enthralled with your video and could not stop watching. I ended up learning a lot about wiring. And that comes from a guy who’s been doing low-voltage wiring for 30 years, for what that’s worth lol. I hope you will continue to make videos for a very long time on a wide variety of subjects. I know that I will always learn from them.
Hi David! Thanks you so much for watching and for the kind words. It truly means a lot. I am glad you were able to learn something from the video and found it easy to follow😁
Amazing explanation and demonstration!! I haven't seen any youtube video that even comes close. And there's a lot of self proclaimed "experts" out there.
Hey Lauren, I have just watched your install videos for the van power and the pre-wire and post-wire videos. Let me Just say as a 240 volt licensed electrician and solar installer from Australia 🇦🇺🦘🪃you have done a great job from start to finish and the instructions you have given were invaluable to those who have not done this before. Well done and let me just say you have done a better job than a lot of the tradesmen I know 😂 you are methodical neat and thorough from start to finish. Great work and if you are ever in Australia 🇦🇺 and need a job I would hire you in a second. Fabulous content as well. Keep it up. 👌👍😘
This is a really well done video! I watched side-by-side with Nate's video as I did my install and it was really helpful having 2 different people explain the same thing. The best part was how well you explained and showed installing the DC2DC in a Promaster. I had searched for a long time to find a good video on this project and your demonstration made this part of the installation so much easier for me! Thanks, Lauren!
Awesome video, very methodical, easy to understand the procedure start to finish. I have watched a lot of videos on electrical install for van's etc, but i am glad i have now found one as a reference to practically the same install/brand i will be installing to my future build. Thank you for sharing.
Best electrical video I have seen - very much appreciate how you are providing list of tools and capture every single step required to complete electrical install. Section identification in the video timeline has been super helpful. Thank you so much for sharing with other van builders.🙂
Don't forget security for your expensive system should be the 1st thing you do, great idea with those rubber strips where the wires go in and out, definitely easy to overlook those kind details, thanks for the reminder
Unbelievable marathon! I'm totally exhausted only after watching this video (and need a beer). I can only imagine how do I feel after making this system.
I have seen tons of dye electrical system installation. But never seen such a detailed and neat work like yours. I wish your video can help me do the same system for my boat. You really have diminished the worries i had to do so. The video was so long but i can watch it again and again..... God bless you young lady.
One of the best videos I ever seen to an electrical installation. The good housewife knows what a kitchen should look like. That's fun 1:42:40 and just as easy as kneading dough in the bowl.
Wow! This is great! I have ALL the same exact equipment, the same number of Battleborn batteries, Lynx distributor, 100/50 charge controller, Multiiplus...even the same van (ProMaster)! The only difference is the solar panels we chose. Finally a system build I can follow to the letter. Thanks SO much for making this video!
Thanks for the comment, Deirdre! Sounds like you have the perfect setup😉 I’m so glad you found the video helpful. Best of luck with your install, you got this!
I came across your channel and am very impressed by the depth of instructional videos. I just saw the one-hour ceiling video and now this one takes the cake at over 2 hours.
Hahaha thank you for watching! I know some of the videos are long and I try to make them as short as I can but I never want to jeopardize leaving out details some may want and need. So I appreciate you commenting this🥰🫶🏻
Haven't watched yet, but I love that this video is over 2 hours. I love a lot of information in one place and i can only assume a 2 hour video has everything I've been looking for. 😅
Awesome video-I bookmarked this immediately. I'm a residential and commercial electrician who's starting to get interested in van/boat wiring with solar, etc. Your explanations of everything are clear and extremely detailed, and your installation is really neat and professional-great job on the install, and the video! Keep them coming- thank you!
I do appreciate the full breakdown of everything all the way down to the tools. A lot of people don't do that these days. They just assume you'll figure it out. Some people for reasons that may differ may need that extra input. I personally don't need those bits of detail because of my previous jobs, but there are definitely people who do. Keep up the good work.
Amazing! Explorist Life was the video I used to install 110 outlets from my interverter ( which was already attached to the battery) I was amazed that I was able to do it and that it actually worked. Top notch teacher from Explorist life and his prodigy Lauren who is teaching me how to wire my whole Van. Excellent!!!!!
Wow Lauren! What an amazing and educational vid. Being that it's over 2 hrs. long, it'll take me a while to watch the video from start to finish. But that's cool because I'll pause it many times and still see it in its entirety. Thanks for doing such a great and detailed job on this. You're a marvelous and very helpful teacher. 🍎😀
Searched for weeks on RUclips for an explanation to properly connect Victron components and Lauren your video is by far the best and very easy to understand what I've seen in all those weeks! Big compliment for how you did this in all peace! Amazing job Lauren! Greetings from the Netherlands.
Lauren...WOW! What an awesome and very technical video of step by step "how to" install an electrical system the correct way and to code. I know you made Nate proud and have taught a lot us some things along the way. Good luck and blessings as you continue to build out your van!
Thank you for creating this video. I believe I can speak for everyone when I say your audience also shared your enthusiasm when you wired the ceiling fan and it powered on (Time 1:22:25)! Also, I now have a greater appreciation for the benefits and convenience of using the EXPLORIST.Life wiring kits.
I agree 100% with you, ExploristLife folks and their videos are AMAZING!! I'm converting a box truck by myself for full-time living (currently been FT in a Lazy Daze RV for over four years), so I'm right there with ya! So much to learn, but what a grand adventure we are on! Fantastic job!!
GREAT VIDEO! MAYBE EVEN GOAT for van life builds. I used to work for fortune 500 semiconductor company (Dont' want to say which) but this video was MUCH high quality and more educational training videos we got. Great job Lauren! You should legit add to / edit this video as needed and try to sell it to them. I think a lot of companies would buy it in a second.
@@LaurenLawlissDearest Laura, I also am business and have business and believe business would buy you, please consider us when you need PVC piping 20-60cm x any length, we can pipe
Hey Nate & Steph, you better hire Lauren soon before she becomes your competition : ) Kidding of course, but Lauren you definitely have a future in Van Building if you choose to pursue it : ) Thank you for sharing...
Thanks for the great video. You don't need the excess wire from the positive of the battery, the bank would still be balanced as the travel length for the electrons to each battery would still be the same for all the batteries.
Man I wish I'd have seen this video way before I screwed my solar up,,,You Had the answers to everything i needed and more,,Godd thing is now I know and can go fix what we did wrong, could not understand why I kept blowing the fuse for the 12 volt side,,Thank you so much for this !
Thank you very much, Lauren. You are fantastic. This is the best and most precise description of electrical connections I have seen. All your videos are very instructive. You are the best of all RUclips van builders. Great work!
I put 7000 watts of inverters and 45 kw of 24 volt lifepo4 with my victron charge controllers and another 200 amps of 110 volt to 24 volt powermax chargers all in the cabinet under my campers bed. It was well over 20 grand of components and its amazing but was cooking under the bed. I had to put two small fans.. one pushing one pulling air from under the bed to help cool under there but now its all working great. This lifestyle is very comfortable with the right equipment. Thanks to you allaking videos i was confident in my installation and did it all myself. Thanks for the videos
@@LaurenLawliss I think the victron charge controllers have this thing built in where if they start over heating they start cutting back the charge. Atleast that's what mine seemed to be doing until I installed the little fans. You have a great looking install by the way. O yeah... I got this little temp switch off amazon that controls the fans now and it works really good without me needing to turn them on or off now it's just kinda automatic. Anyways.. thanks for the video
@@LaurenLawliss i wouldn't want that amount of electromagnetic radiation close to me while im sleeping. When I do my build I hope to put my batteries and power system as far from the bed as possible.
If it was me I would use a gfci outlet for every outlet. These detect a difference in currents going out of and returning to the receptacle ( .04-.06 milliamperes typically) this way if an appliance faults it won’t become energized The term used by electricians for the connectors used to connect a SO/SOOW cable assembly or single wire in to a box/housing/panel is often referred to as a CGB vs your term “gland” in case someone needs to get an extra one at an electrical supply house. I am impressed with your simple to follow, rudimentary, accurate and step by step instruction and installation of this electrical system. My only extra advice is that there are good reasons for having a manual disconnect switch for every portion of the integrated system especially when troubleshooting or servicing or if a component of the system fails. Perhaps these disconnect switches could be installed just outside of the main battery/inverter compartment in case of a fire. I also like the idea of having the system in a steel or aluminum box ( I realize this could effect Bluetooth connections maybe the dongle could be mounted just outside of it)It will probably never have a catastrophic incident however if it did it a high amperage fault could be ugly. One last thing normally residential/commercial breaker panels are made by a specific manufacturer and typically the panels are UL listed to have only there own brand and model of breaker used in that panel. I noticed you used a Square D single pole 50 amp as well as some Siemens tandem 20 amp breakers in the same 120 volt breaker box. Are both of these brands approved for use in it? I bring this up because I have seen insurance company’s try to deny customer insurance claims because different breakers were used in homes. If I may also recommend insure when you set a clamp ( your shore power socket) that it is on top of the outer Romex insulation/jacketing, otherwise great job.
This series has been really informative and watching your progress is awesome! The leds under your cabinets....A+! Can't wait to see the finished project! Nice work, seriously!
Superb content & dialogue. Upgrading my A Class motorhome with Victron solar panels & controllers I found this video extremely helpful. From an old grandfather, big thanks.
Excellent job Lauren! I don't think I've observed a better, more detailed, more competent explanation anywhere! I hope I run into you out there to tell you in person! I'll buy you a coffee or a beer!
youve worked this video out very thoughtfully and made it very easy to understand. i noticed you showed 4 different ways to tie in the battery bank and diagonally is the only way to go, it makes the batteries work together, charges them equally and loads them just the same. before i became an rv tech i was diesel tech and this is how we wired our banks together. you will gain maximum MCA or CCA from the batteries. there is a downside though the batteries will wear down togehter and when it comes time to replace them, they all will need replacing but this is offset by the fact you will gain a much longer life out of them.
This is just what I need to get the gumption up to start assembling and installing my Explorist Life wiring kit. I'll surely refer back to both video guides and have no issues, I hope!
Wow girl! I mean WOW! GREAT JOB, BE PROUD!!! Hay, want to do my wiring? AND THE VIDEO TOO, WOW!!!😮 SO complete, I guess some people DO know how to communicate still but not very many.
Yup, always use quality electrical tape. I prefer a heftier dc-dc charger (since I rely less on solar). And lastly, consider using a thermal camera to look for any loose connections!
From the other end of the world, I am amazed with such talent and so detailed project you've done. You need to be proud that a lot of people are following your steps. I loved how your hands looked during installation. Wish you good luck
Hello! Loved the video very very helpful and well made, one small consideration, from what I read everywhere its suggested that the ANL fuses are not recommended as battery fuses in that manner because they have a AIC of only 6000 and lithium batteries are supposedly can produce a lot more than and could mean the fuse is ineffective, it seems like industry gold standard is class T fuses which I understand to be hard to get in America so perhaps a MRBF is a better option at an AIC of 10,000A . Im no expert at all just wanted to share what I had learnt recently when trying to design mine!
Im just so impressed, i think that was the best presentation i have e er seen when it comes down to hining in on the job. I needed all the work up to the real install, and yours was perfect, like a diving board when finially getting to the pool ! Hu rahhhh !
Very well and extensively explained. Two things though I couldn't resist sighting: My OCD had me screaming 'turn those mega fuses over so you can seen brand and rating'. Other than that I bet you had no end of joy cleaning your hands and getting all that black goop off. 🤣
Pro tip- When building off grid electrical systems always upsize the battery bank to excede what you will need for a minimum of 3 days without sunlight.
¡Enhorabuena por este vídeo!. Es de los pocos vídeos que he visto tan bien explicado, con todo detalle. Has hecho un trabajo sobresaliente, no sólo en tu furgoneta, sino también en tus grabaciones y montaje de vídeo. Un trabajo titánico... Gracias por compartir.
Love it! another name for the AC Voltage Detector is "Chicken Stick" lol, and it can save your life. 50 volts can kill you. which if I looked right you're running a 48v system which charges to 52-58 volts. Always be careful. Just because someone survived getting shocked by 110 or 220 doesn't mean anything. typically it only shorted through the part of the body connected, if it passes through your heart e.g. hand to hand, you're done.
I forgot to mention that being DC power the chicken stick won't work on it, but there are other tools like the multimeter to help keep you safe. It is good on the 120V though.
Wow... Is all I can say. You are a wealth of knowledge! I hatching a plan now for a battery bank in our travel trailer. I want to do as much solar as I can on the roof, and have enough inverted power to run everything for some off grid camping. You seem like a fascinating woman. Definitely subbing!
Correct, that is why I used a serrated washer to cut through the paint and down to the bare metal and also why I mentioned if you don’t have a serrated washer to scratch off the paint😄 Thanks for watching and commenting!
Hi Lauren, just a note to say it looks like you forgot to replace the black cable separators between the Positive and Negative wires on the Lynx Distributor. Great instruction video!
@@LaurenLawliss Hi Lauren, 4x4s point could be worth correcting or checking off with Nat, as the cable separators are likely designed to ensure insulation, under all conditions bar submersion, between the positive and negative.
Kid, I am a retired electrical engineer. I was also an electronics technician for 10 years. I have wired many solar systems as well as designed and constructed many electronic panels.. I can say that EVEN I would have a hard time doing as well as you did. I carefully watched your video and you did it all right, the safe way and you can be proud of what you did. It is rare to see a hobbyist or a DIY person with the experience that you have. I would like to ask you: Did you have a professional helping you do/produce this project?? If yes, good job. If not, GREAT Job.. Either way, a first class job. This is one of the best videos I have seen
You have made one of the most comprehensive electrical installation videos for van builds I've ever seen, you've done a great job. ❤
Thank you; I appreciate it!🥰
I agree
Thank you🫶🏻
And....thank you for not adding any music during the explanation.
👍🏼👍🏼👍🏼
This is absolutely fantastic! The workmanship you put into that system is top-notch. I'm particularly excited to see the detail you put into the 'how to connect to the starting battery of a Promaster' section on this build. I have not seen that part documented on a promaster as clearly as you showed in this video and I'll definitely be referring people to that section specifically when I get asked about that topic. Well done!
Thank you so much! The EXPLORIST.Life wiring kits made this project a breeze. Every van DIYer will benefit greatly from your resources and product offerings😄
yes wow i'm just starting to watch this video right now and already interested/excited to see the entire thing, even tho i've been finished with my Promaster's electrics for almost two years now... :)
😊f😮😮Ĺ⁰4,
From the other end of the world, I am amazed with such talent and so detailed project you've done. You need to be proud that a lot of people are following your steps. I loved how your hands looked during installation. Wish you good luck
I know , right !
Best video I’ve seen explaining every step of how to install a complete Victron power system. Lauren has the gift of taking a complicated, technical project and making it understandable.
I appreciate the kind words🫶🏻
Very good at walking through every step, which might be obvious to some people, but when you don’t know anything it’s very reassuring , thank you .
Appreciate your reassurance that the details are helpful and not overkill 😆
You are the best van construction teacher, no one can surpass you👍👍👍👍
That means a lot to me. Thank you!!
Lauren, this was a MIC Drop Video. You gave me the confidence to give this a try on my own. I'm at the beginning of my Van Search, but it will be a ProMaster. The knowledge that you have provided for non-professionals is just immeasurable. The only thing I would do differently is hire an electrician to check my work before I flip the switch.
Yayaya, I’m so happy to hear that!!!! You got this😄
I'm very impressed with you. As young as you are there's not many like you that would tackle a project this big and complex. Thumbs up way to go
Thank you! I love learning new things and challenging myself so it was a lot of fun!
The rest can’t tie your shoe 👠 .. you are the BEST by far you missed NOTHING !!!! GOD sent !!! I understood EVERYTHING
Thank you for this kind comment! I am so glad you found it helpful. Appreciate you watching🥰
You deserve serious props for demonstrating cutting the 4/0 cable. That's expensive stuff.
Haha it was a fun project.
Wow what a life saver you are! I can’t believe I hadn’t found you before. Im trying to finally convert a van but Im planing everything first and this video just gave me the confidence into doing this part myself, you explained everything so well, I am finally understanding how everything goes. Thank you so much for doing this. ❤
I am so glad to hear!! Thank you 💖
Just watched this for the 3rd time. I think I love you. LOL you are freaking awesome. Keep spitting out content. Awesome delivery, scene planning etc. So well done.
Haha I appreciate it!
Wow, you are more equiped than most electricians out there. I really hope you get to use it all more than once.
Haha I enjoyed this project a lot 😅
I’m a nerd for instructional videos and I’ve been an avid RUclips self learner for over a decade. Hands-down this is the absolute best, most thorough and comprehensive, organized and helpful instructional video I have ever seen; on any subject anywhere.
I have no idea what your career involves, but you are a brilliant instructor. Much like myself, you leave no stone unturned in your explanation. I can really appreciate that and I can say also that very few people are able to accomplish that level of clarity.
I’m not a pro master or a sprinter person. I’m still good with my 87 Westfalia, nonetheless I was enthralled with your video and could not stop watching. I ended up learning a lot about wiring. And that comes from a guy who’s been doing low-voltage wiring for 30 years, for what that’s worth lol.
I hope you will continue to make videos for a very long time on a wide variety of subjects. I know that I will always learn from them.
Hi David! Thanks you so much for watching and for the kind words. It truly means a lot. I am glad you were able to learn something from the video and found it easy to follow😁
Amazing explanation and demonstration!! I haven't seen any youtube video that even comes close. And there's a lot of self proclaimed "experts" out there.
Well I’m certainly not an expert, but I’m glad you found it helpful in your research!
Hey Lauren, I have just watched your install videos for the van power and the pre-wire and post-wire videos. Let me
Just say as a 240 volt licensed electrician and solar installer from Australia 🇦🇺🦘🪃you have done a great job from start to finish and the instructions you have given were invaluable to those who have not done this before. Well done and let me just say you have done a better job than a lot of the tradesmen I know 😂 you are methodical neat and thorough from start to finish. Great work and if you are ever in Australia 🇦🇺 and need a job I would hire you in a second. Fabulous content as well. Keep it up. 👌👍😘
I appreciate the kind words - it means so much 🫶🏻
Damn girl youre a perfectionist x
It’s a gift and a curse 😆
This is a really well done video! I watched side-by-side with Nate's video as I did my install and it was really helpful having 2 different people explain the same thing. The best part was how well you explained and showed installing the DC2DC in a Promaster. I had searched for a long time to find a good video on this project and your demonstration made this part of the installation so much easier for me! Thanks, Lauren!
Thank you for the kind words. I am so happy you found this video helpful. Congrats on your install 🎉 🥳
Awesome video, very methodical, easy to understand the procedure start to finish. I have watched a lot of videos on electrical install for van's etc, but i am glad i have now found one as a reference to practically the same install/brand i will be installing to my future build.
Thank you for sharing.
Glad you found the video helpful! Best of luck on your future build 😁
Outstanding job !!
If you are looking for the best and most complete lesson about solar electricity, cables, battery's and etc, this is the place !!
That means a lot, thank you!
The quality of this video is absolutely second to none. You provided the most perfect explanation of EVERYTHING. Really well done.
Thank you, Nathan! This comment means so much. I am glad you enjoyed the video❤️
Best electrical video I have seen - very much appreciate how you are providing list of tools and capture every single step required to complete electrical install. Section identification in the video timeline has been super helpful. Thank you so much for sharing with other van builders.🙂
she oversized about everything x3
I appreciate the kind words and am glad you found it helpful🥰
The detail, quality and informative nature of your videos are virtually unheard of. THANK YOU!! SUBSCRIBED!
Thank you, thank you! Welcome🫶🏻
By far the absolute BEST video on RUclips for wiring your RV Van conversion!!
Wow! Glad it was helpful. Thanks for watching❤️
Don't forget security for your expensive system should be the 1st thing you do, great idea with those rubber strips where the wires go in and out, definitely easy to overlook those kind details, thanks for the reminder
Glad you found it helpful!
Wonderful work, exceptional video, well thought through, well organized, well executed. Simply exceptional. Thank you for this very fine work.
Thank you for the kind words - it means a lot to me 💖
Unbelievable marathon! I'm totally exhausted only after watching this video (and need a beer). I can only imagine how do I feel after making this system.
Haha I was exhausted for a week after this😅
FInally an electric set up video where I don't have any questions! Thank you.
Haha glad to hear it!
I have seen tons of dye electrical system installation. But never seen such a detailed and neat work like yours. I wish your video can help me do the same system for my boat. You really have diminished the worries i had to do so. The video was so long but i can watch it again and again..... God bless you young lady.
Thank you for the kind words! I am so glad you found it helpful. Hopefully you can use some of this knowledge for your boat. God bless.
I watched this from start to finish. Extremely detailed video well planned and executed. 💯💯
Thanks for watching and commenting 🫶🏻
Just caught this one. Clear, concise, with great explanations and demonstrations. TY for taking the time to make this video.
Thank you for watching and commenting! Glad you found it helpful.
Great job young lady! A true independent woman who can roll down her sleeve and get it done herself. Very informative.
Thank you💖
Brilliant. I have surfed the entire internet and found this one most clear, concise and useful! Thank you.
That means so much, thank you! I’m glad you found it useful.
So many battle scars on your hands great work 👍
Hahahah yeah, my hands have looked better😅
One of the best videos I ever seen to an electrical installation. The good housewife knows what a kitchen should look like. That's fun 1:42:40 and just as easy as kneading dough in the bowl.
Glad you enjoyed it!
Wow! This is great! I have ALL the same exact equipment, the same number of Battleborn batteries, Lynx distributor, 100/50 charge controller, Multiiplus...even the same van (ProMaster)! The only difference is the solar panels we chose. Finally a system build I can follow to the letter. Thanks SO much for making this video!
Thanks for the comment, Deirdre! Sounds like you have the perfect setup😉 I’m so glad you found the video helpful. Best of luck with your install, you got this!
@@LaurenLawliss Thank you! ...again. :)
I came across your channel and am very impressed by the depth of instructional videos. I just saw the one-hour ceiling video and now this one takes the cake at over 2 hours.
Hahaha thank you for watching! I know some of the videos are long and I try to make them as short as I can but I never want to jeopardize leaving out details some may want and need. So I appreciate you commenting this🥰🫶🏻
@@LaurenLawliss I noticed that the sections are very distinct as if you intended to cut it into sections in a playlist?
Correct. I added a timeline of what is covered in the video so you can jump around to the section you need☺️
Haven't watched yet, but I love that this video is over 2 hours. I love a lot of information in one place and i can only assume a 2 hour video has everything I've been looking for. 😅
I’m the same way - love having all the information in one spot 😆
Awesome video-I bookmarked this immediately. I'm a residential and commercial electrician who's starting to get interested in van/boat wiring with solar, etc. Your explanations of everything are clear and extremely detailed, and your installation is really neat and professional-great job on the install, and the video! Keep them coming- thank you!
Thank you so much for watching and commenting! Your kind words mean so much to me☺️💖
I do appreciate the full breakdown of everything all the way down to the tools. A lot of people don't do that these days. They just assume you'll figure it out. Some people for reasons that may differ may need that extra input. I personally don't need those bits of detail because of my previous jobs, but there are definitely people who do. Keep up the good work.
Happy I could help 😄
Amazing! Explorist Life was the video I used to install 110 outlets from my interverter ( which was already attached to the battery) I was amazed that I was able to do it and that it actually worked. Top notch teacher from Explorist life and his prodigy Lauren who is teaching me how to wire my whole Van. Excellent!!!!!
Nice job! And thank you for watching and commenting. I appreciate it☺️
Legend. This just made everything make sense with some very handy tips along the way. Thank you :)
Glad you found it helpful!
I didn't intend to watch the whole video in one sitting but I did.Very informative, it looks like the kits are the way to go.Awesome video.
Hahaha thanks for sticking it out the full 2 hours. The kits are a game changer. Made my life so much easier and highly recommend😁
Wow Lauren! What an amazing and educational vid. Being that it's over 2 hrs. long, it'll take me a while to watch the video from start to finish. But that's cool because I'll pause it many times and still see it in its entirety. Thanks for doing such a great and detailed job on this. You're a marvelous and very helpful teacher. 🍎😀
Thank you so much! I appreciate you being here🥰
Searched for weeks on RUclips for an explanation to properly connect Victron components and Lauren your video is by far the best and very easy to understand what I've seen in all those weeks!
Big compliment for how you did this in all peace!
Amazing job Lauren!
Greetings from the Netherlands.
Wow, thank you so much for the kind comment! I am glad you found the video helpful. Best of luck with your install😆
What an excellent job explaining this install! I even think this old man can do it now. Thank You, Thank You, THANK YOU!!!!
Thank you for watching! With the very straight forward EXPLORIST.Life wiring kits I am confident ANYONE can do this😇
Lauren...WOW! What an awesome and very technical video of step by step "how to" install an electrical system the correct way and to code. I know you made Nate proud and have taught a lot us some things along the way. Good luck and blessings as you continue to build out your van!
Awh thank you for the kind words!! Appreciate you watching🥰
Thank you for creating this video. I believe I can speak for everyone when I say your audience also shared your enthusiasm when you wired the ceiling fan and it powered on (Time 1:22:25)! Also, I now have a greater appreciation for the benefits and convenience of using the EXPLORIST.Life wiring kits.
Thank you for watching! Hahah yeah, it was exciting to see it all work. @EXPLORIST.life wiring kits are a no brainer - it made my life A LOT easier🤩
I agree 100% with you, ExploristLife folks and their videos are AMAZING!! I'm converting a box truck by myself for full-time living (currently been FT in a Lazy Daze RV for over four years), so I'm right there with ya! So much to learn, but what a grand adventure we are on! Fantastic job!!
Right!? EXPLORIST.Life is AMAZING🤩 Good luck with the rest of your build and safe travels.
@@LaurenLawliss , thanks! You, too!
Some one invested a TON in tools
Only about $300 and at the end of the day I didn’t need them all. So if you are on a limited budget, there are some tools you can do without.
Great job
Thank you!!
How does this girl only have 14k subs? Amazing video
Thank you 💖
What an amazing detailed video. Thank you for making it and great work with the installation.
I appreciate it! Glad you like it.
Very well done, informative and easy to follow.
I agree with fellow poster about battle born over priced items.
Thanks! Yes, certainly a costly install but was perfect for me.
GREAT VIDEO! MAYBE EVEN GOAT for van life builds. I used to work for fortune 500 semiconductor company (Dont' want to say which) but this video was MUCH high quality and more educational training videos we got. Great job Lauren! You should legit add to / edit this video as needed and try to sell it to them. I think a lot of companies would buy it in a second.
Thank you for watching and commenting! I appreciate the kind words, means a lot🥰❤️
@@LaurenLawlissDearest Laura, I also am business and have business and believe business would buy you, please consider us when you need PVC piping 20-60cm x any length, we can pipe
Hey Nate & Steph, you better hire Lauren soon before she becomes your competition : ) Kidding of course, but Lauren you definitely have a future in Van Building if you choose to pursue it : ) Thank you for sharing...
Hahaha thank you for the comment! I would love to build vans full time🤩
I love how specific she is... She literally says the full 100% exact name of every single component over and over again lol.
It got very repetitive but I’m glad you found it helpful 😆
That was such a great build, wow! Grat work!
Thanks a bunch!
Hello Mahmoud, I am from Iran. I have a solar power system at home and I learned a lot from you. Good luck.
Welcome! Glad you found the video helpful.
An absolutely superb video for anyone coming to solar/battery backup ( in no way limited to van conversions)
Thank you! Appreciate it😄
Thanks for the great video. You don't need the excess wire from the positive of the battery, the bank would still be balanced as the travel length for the electrons to each battery would still be the same for all the batteries.
From my research, talking to the experts and manufactures, they all advised this was the correct way to do it 😁
Excellent and informative! Saved this in my GMC/ Overland/ do later Playlist lol
Glad you liked it!
Man I wish I'd have seen this video way before I screwed my solar up,,,You Had the answers to everything i needed and more,,Godd thing is now I know and can go fix what we did wrong, could not understand why I kept blowing the fuse for the 12 volt side,,Thank you so much for this !
I’m glad you found the video helpful. Best of luck with your fixes💖☺️
Thank you very much, Lauren. You are fantastic. This is the best and most precise description of electrical connections I have seen. All your videos are very instructive. You are the best of all RUclips van builders. Great work!
Thank you! Your kind words mean so much🥰
I put 7000 watts of inverters and 45 kw of 24 volt lifepo4 with my victron charge controllers and another 200 amps of 110 volt to 24 volt powermax chargers all in the cabinet under my campers bed. It was well over 20 grand of components and its amazing but was cooking under the bed. I had to put two small fans.. one pushing one pulling air from under the bed to help cool under there but now its all working great. This lifestyle is very comfortable with the right equipment. Thanks to you allaking videos i was confident in my installation and did it all myself. Thanks for the videos
Wow! Nice setup. I’m glad my video gave you the confidence to do your install. I am so glad to hear it is working well, enjoy☺️
Just wondering how your power system is doing? Is it getting really hot being in the confined space.
Not at all😄 I have installed a vent in the back and a 12v fan for air flow to prevent it from overheating. So far, so good!
@@LaurenLawliss I think the victron charge controllers have this thing built in where if they start over heating they start cutting back the charge. Atleast that's what mine seemed to be doing until I installed the little fans. You have a great looking install by the way. O yeah... I got this little temp switch off amazon that controls the fans now and it works really good without me needing to turn them on or off now it's just kinda automatic. Anyways.. thanks for the video
@@LaurenLawliss i wouldn't want that amount of electromagnetic radiation close to me while im sleeping. When I do my build I hope to put my batteries and power system as far from the bed as possible.
Great video!
Appreciate it💖
If it was me I would use a gfci outlet for every outlet. These detect a difference in currents going out of and returning to the receptacle ( .04-.06 milliamperes typically) this way if an appliance faults it won’t become energized
The term used by electricians for the connectors used to connect a SO/SOOW cable assembly or single wire in to a box/housing/panel is often referred to as a CGB vs your term “gland” in case someone needs to get an extra one at an electrical supply house. I am impressed with your simple to follow, rudimentary, accurate and step by step instruction and installation of this electrical system. My only extra advice is that there are good reasons for having a manual disconnect switch for every portion of the integrated system especially when troubleshooting or servicing or if a component of the system fails. Perhaps these disconnect switches could be installed just outside of the main battery/inverter compartment in case of a fire. I also like the idea of having the system in a steel or aluminum box ( I realize this could effect Bluetooth connections maybe the dongle could be mounted just outside of it)It will probably never have a catastrophic incident however if it did it a high amperage fault could be ugly. One last thing normally residential/commercial breaker panels are made by a specific manufacturer and typically the panels are UL listed to have only there own brand and model of breaker used in that panel. I noticed you used a Square D single pole 50 amp as well as some Siemens tandem 20 amp breakers in the same 120 volt breaker box. Are both of these brands approved for use in it? I bring this up because I have seen insurance company’s try to deny customer insurance claims because different breakers were used in homes. If I may also recommend insure when you set a clamp ( your shore power socket) that it is on top of the outer Romex insulation/jacketing, otherwise great job.
Using some electrical tape wrapped around your tool can help to avoid accidental arcing ( and wear you safety glasses)
Correct. I do have GFCI outlets in the van and a few master switches for different parts of the system. Electrical tape is a great tool too.
This series has been really informative and watching your progress is awesome! The leds under your cabinets....A+! Can't wait to see the finished project! Nice work, seriously!
Thank you for the kind words - I appreciate it a lot!
In 2017 Battleborn hooked me up with all my components as well, except for my Renogy solar panels. I can’t say enough good things about Battleborn.
Same here! Top notch products.
What a wonderful detailed video. You are certainly the embodiment of Girl Power! Keep up the great work.
Thanks for watching and commenting! I appreciate the kind words🥰
Your attention to detail is outstanding!
Thank you!😄
Superb content & dialogue. Upgrading my A Class motorhome with Victron solar panels & controllers I found this video extremely helpful. From an old grandfather, big thanks.
Thank you for the kind words! Best of luck with your install🥰
Excellent job Lauren!
I don't think I've observed a better, more detailed, more competent explanation anywhere!
I hope I run into you out there to tell you in person!
I'll buy you a coffee or a beer!
Thank you! Your kind words mean so much. See you on the road🤞🏼
Wow ... such an amazing video. Thank You!
Appreciate it 💖
youve worked this video out very thoughtfully and made it very easy to understand. i noticed you showed 4 different ways to tie in the battery bank and diagonally is the only way to go, it makes the batteries work together, charges them equally and loads them just the same. before i became an rv tech i was diesel tech and this is how we wired our banks together. you will gain maximum MCA or CCA from the batteries. there is a downside though the batteries will wear down togehter and when it comes time to replace them, they all will need replacing but this is offset by the fact you will gain a much longer life out of them.
Thanks for the comment!
This is just what I need to get the gumption up to start assembling and installing my Explorist Life wiring kit. I'll surely refer back to both video guides and have no issues, I hope!
How exciting!! The kits will make the install a breeze. Good luck!
Thank you for a greatly made video!
You bet! Thanks for watching and commenting 🫶🏻
Wow girl! I mean WOW! GREAT JOB, BE PROUD!!! Hay, want to do my wiring? AND THE VIDEO TOO, WOW!!!😮 SO complete, I guess some people DO know how to communicate still but not very many.
Wow! Thank you for the kind words; it means a lot🥰🙌🏼
great job girl!
Thank you😊
Yup, always use quality electrical tape. I prefer a heftier dc-dc charger (since I rely less on solar). And lastly, consider using a thermal camera to look for any loose connections!
Thanks for the comment!
I think this might be the best electrical install video I have ever seen and I think I have watched most of them ;)
Thank you, Amy! That means a lot🥹
You help me to move forward. And Don t be afraid to build my van❤️. Thanks
That means so much! I am glad I can help. Best of luck with your build❤️
From the other end of the world, I am amazed with such talent and so detailed project you've done. You need to be proud that a lot of people are following your steps. I loved how your hands looked during installation. Wish you good luck
Thank you for the kind words! Honestly, same; I like seeing evidence of the hard work I’ve done on my hands hahaha😂
Hello! Loved the video very very helpful and well made, one small consideration, from what I read everywhere its suggested that the ANL fuses are not recommended as battery fuses in that manner because they have a AIC of only 6000 and lithium batteries are supposedly can produce a lot more than and could mean the fuse is ineffective, it seems like industry gold standard is class T fuses which I understand to be hard to get in America so perhaps a MRBF is a better option at an AIC of 10,000A . Im no expert at all just wanted to share what I had learnt recently when trying to design mine!
Well done Lauren you are a champion.
Appreciate it!
Im just so impressed, i think that was the best presentation i have e er seen when it comes down to hining in on the job. I needed all the work up to the real install, and yours was perfect, like a diving board when finially getting to the pool ! Hu rahhhh !
I am so glad you found it helpful! Best of luck with your install, you got this🙌🏼😆
you did a fantastic job,
Thank you!
Very well and extensively explained. Two things though I couldn't resist sighting: My OCD had me screaming 'turn those mega fuses over so you can seen brand and rating'. Other than that I bet you had no end of joy cleaning your hands and getting all that black goop off. 🤣
Oh gosh, I didn’t even recognize that I did that lol. Must have been the tiredness of 12+ hour days kicking in haha
Pro tip-
When building off grid electrical systems always upsize the battery bank to excede what you will need for a minimum of 3 days without sunlight.
Good tip. Glad I did just that!
Extremely detailed and clear explanation! Awesome!
Thank you, appreciate it!
¡Enhorabuena por este vídeo!. Es de los pocos vídeos que he visto tan bien explicado, con todo detalle. Has hecho un trabajo sobresaliente, no sólo en tu furgoneta, sino también en tus grabaciones y montaje de vídeo. Un trabajo titánico... Gracias por compartir.
Thank you so much!!
Love it! another name for the AC Voltage Detector is "Chicken Stick" lol, and it can save your life. 50 volts can kill you. which if I looked right you're running a 48v system which charges to 52-58 volts. Always be careful. Just because someone survived getting shocked by 110 or 220 doesn't mean anything. typically it only shorted through the part of the body connected, if it passes through your heart e.g. hand to hand, you're done.
I forgot to mention that being DC power the chicken stick won't work on it, but there are other tools like the multimeter to help keep you safe. It is good on the 120V though.
also, I misread the system, its only 12v still not fun to get bit but (depending on the wattage) wont kill you.
I just came across your video as I’m planning my build. Excellent video and information!!! Great job!! Thank you.
Thanks you for the kind words. Glad you found the channel.
Wow... Is all I can say. You are a wealth of knowledge! I hatching a plan now for a battery bank in our travel trailer. I want to do as much solar as I can on the roof, and have enough inverted power to run everything for some off grid camping. You seem like a fascinating woman. Definitely subbing!
Thank you! Sounds like a fun project ahead of you. Best of luck😄
Best Install guide on the internet.. can you do boat plumbing next please.. safe travels
Thank you so much!!
Typically, you send the chassis ground hole to bare metal for ensured ground contact. Otherwise, an epic van electrical system(s) tutorial! Well done
Correct, that is why I used a serrated washer to cut through the paint and down to the bare metal and also why I mentioned if you don’t have a serrated washer to scratch off the paint😄 Thanks for watching and commenting!
another great video. Very well thought out and explained. Thank you for going to all the trouble of making this video.
Thanks for watching and commenting🫶🏻
FANTASTIC. Whatched the whole video. Too bad I never seen such a distribution panel for 220VAC. It is a beautifull electrical installation 😊
Appreciate it!!!❤️❤️
This video is so well-organized and I look forward to learning a lot from you! Thank you!
I appreciate it! Thanks for watching and commenting.
Hi Lauren, just a note to say it looks like you forgot to replace the black cable separators between the Positive and Negative wires on the Lynx Distributor.
Great instruction video!
Thanks for watching and commenting!
@@LaurenLawliss Hi Lauren, 4x4s point could be worth correcting or checking off with Nat, as the cable separators are likely designed to ensure insulation, under all conditions bar submersion, between the positive and negative.