I really appreciate that you've done a bunch of research on each topic before you do your video. Usually I seek out a half dozen videos on each project - but when I watch yours you've included all the information from the other videos, and even the manufacturer specifications and manufacturer installation instructions/videos. As my van progresses, now yours are pretty much all I need. Thanks!
I appreciate that! I also found that information was spread out across multiple resources so I’m trying my best to consolidate as much as I can for y’all😊
Very well done, as there's no loud background music to interfere with your narrative. I suggest two rollers, one about and inch or two wide for area application and the second being about 3/8" wide for channels. One will get a higher compression using narrow rollers, thus a better and easier application. One can knock on body panels to see which ones do not have a bulkhead as they are not like a panel that's "open". Just having a bit of coffee before I resume the install of Kilmat in my 4 liter powered 1987 Jeep Cherokee which has the same aerodynamics of your brick shaped cargo van, just a bit smaller (humor). The Kilmat is a decoupler, while insulation and carpeting provides noise reduction as well. You will also notice that bedding and mattress will also absorb noise. Anyone who has ever opened or built a properly made sub (i.e. non-band pass) enclosure will comprehend this.
Great job Lauren. I've watched your progress from the beginning. Always look forward to the next episode. Your style is so helpful and encouraging to others. Can't wait to see how it all turns out.
Awesome! I had the very same question about putting the sound deadener in the valleys of the sheetmetal vs. across the raised portions of the panel and wondered if that would make a difference. And you're right, that stuff is not light. You're getting there one step at a time 😉
I used Noico. I had cut my rear floor section carefully to a tight tolerance. Then I put the Noico on the wheel wells with very little overlap. I did another dry fit of the floor and it no longer fit over the wheel wells. D'oh.
Oh no, I ended up having the same issue! Thankfully I left just enough wiggle room with the subfloor to push it down over. I would recommend to anyone else to hold off on the wheel well sound deadening until the subfloor is installed. Thanks for the comment, David!
@@albertofernandez6814 To my understanding, the deadening is specific to automotive. I’m sure you could use it for other thin metal structures but that would just be my hunch😊
Really liked this video. You said that others say they felt it made a difference while others said they don't. Now that you've done it, have you noticed a difference? I'm sure you've driven it before and after and would assume you can tell.
I’ve only driven the van once since installing the sound deadening. Personally I hear a difference when in the van my voice doesn’t echo as much and road noise isn’t as noticeable. It isn’t completely sound proof and may never be, but my insulation, walls and ceiling will help make it even more sound proof. So overall I see a difference, nothing too drastic though.
Really interesting. Though, I suggest to use a utility knife instead of the cisors to cut the stripes more quickly. ;-) And your cisors will not be gummy 🙂
I cut individual pieces for 3M thinsulate so I can fill every cavity but still have access to the van supports to attach furring strips, run wires etc. If you are referring to the sound deadening, you only need 25% coverage. Hope this helps!
kilmat is more weight. All the things you have in your drawers will be what makes the most noise. I think you should kilmat the wheel well but its a waste of money to put it anywhere else. You could add one more 100A battery or a solar panel for the same amount of weight.
Thanks for the comment. Kilmat is up to personal preference. Some people swear by it, others may feel differently. Yes, it does add more weight, cost more money, and takes time, but it does result in a noticeable sound difference in the van. However, once you start adding insulation, floors, ceiling and cabinetry - that also helps to eliminate the sound of a metal box. So again, up to personal preference.
Just to clarify, it isn't 80mm, it's 80 mil. 1 mil is 1000th of an inch (an antiquated increment that only the US still uses). 80mm is around 3 inches. So that is a huge difference. I just don't want people searching the internet for the wrong thing. The US really needs to adopt the metric system, and catch up with the rest of the world.
Lauren, I see this is was posted 2 years ago. However, if you're not aware of this tool, put it in your bag of tricks for when you need it. I bought this for a carpet install I had and it's a game changer. Bonus points because it has so many uses around the house after the project. Be well. ruclips.net/video/5MRXPJm6Iec/видео.html
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
I really appreciate that you've done a bunch of research on each topic before you do your video. Usually I seek out a half dozen videos on each project - but when I watch yours you've included all the information from the other videos, and even the manufacturer specifications and manufacturer installation instructions/videos. As my van progresses, now yours are pretty much all I need. Thanks!
I appreciate that! I also found that information was spread out across multiple resources so I’m trying my best to consolidate as much as I can for y’all😊
@@LaurenLawliss much appreciated... least I can do is leave a comment and say, thank you.
Appreciate it!
Very well done, as there's no loud background music to interfere with your narrative. I suggest two rollers, one about and inch or two wide for area application and the second being about 3/8" wide for channels. One will get a higher compression using narrow rollers, thus a better and easier application. One can knock on body panels to see which ones do not have a bulkhead as they are not like a panel that's "open". Just having a bit of coffee before I resume the install of Kilmat in my 4 liter powered 1987 Jeep Cherokee which has the same aerodynamics of your brick shaped cargo van, just a bit smaller (humor). The Kilmat is a decoupler, while insulation and carpeting provides noise reduction as well. You will also notice that bedding and mattress will also absorb noise. Anyone who has ever opened or built a properly made sub (i.e. non-band pass) enclosure will comprehend this.
Yes, a more narrow roller would help but that’s all I had on hand and it got the job done😆 Good luck on your install!
Awesome job, Lauren. Always helpful videos. I had never seen soundproofing addressed. It's now something I will be doing on my van remodel.
Thank you! Good luck with the remodel😊
Always informative and professionally done, makes me want to buy a van and have a go!😅 Thanks, Lauren, keeps the videos coming😍
Thank you! And I say go for it!!
Turning out to be one of the best tutorial build series I've seen to date. Awesome job!
Awh thank you! That means so much🥹
It really is a great channel!
Great video series.
Appreciate it!
Great job Lauren. I've watched your progress from the beginning. Always look forward to the next episode. Your style is so helpful and encouraging to others. Can't wait to see how it all turns out.
Thank you for your kind words! I’m so glad you have found the videos helpful so far☺️
I already have my van but not yet your courage. While waiting to finally start my development, I enjoy your videos...from Belgium. Keep inspiring us 😉
How exciting! Best of luck with your build, you got this!🤩
Awesome! I had the very same question about putting the sound deadener in the valleys of the sheetmetal vs. across the raised portions of the panel and wondered if that would make a difference. And you're right, that stuff is not light.
You're getting there one step at a time 😉
So heavy😅 I was not expecting that at all. That’s what I keep telling myself, one project at a time!
The Best explanations ever !
Thank you💖
Thanks Lauren. I just got my Kilmat's today and will install over the weekend. It's simply too hot here. 115*
How exciting! Definitely a tiring install but hopefully you find it worth it. Best of luck☺️
Started this morning!
So exciting!! Have fun 😊
You did a great job 👍
Thanks🤩
Interesting thank you
Not too experimented with type of work yet
Thanks for the comment!
I used Noico. I had cut my rear floor section carefully to a tight tolerance. Then I put the Noico on the wheel wells with very little overlap. I did another dry fit of the floor and it no longer fit over the wheel wells. D'oh.
Oh no, I ended up having the same issue! Thankfully I left just enough wiggle room with the subfloor to push it down over. I would recommend to anyone else to hold off on the wheel well sound deadening until the subfloor is installed. Thanks for the comment, David!
Love this video ... Something I knew nothing about...very informative!!
Thank you! Glad you found it helpful😊
@@LaurenLawliss is this deaden material just for vehicles?
@@albertofernandez6814 To my understanding, the deadening is specific to automotive. I’m sure you could use it for other thin metal structures but that would just be my hunch😊
can't wait for the next video 🥰
Thank you!
Really liked this video. You said that others say they felt it made a difference while others said they don't. Now that you've done it, have you noticed a difference? I'm sure you've driven it before and after and would assume you can tell.
I’ve only driven the van once since installing the sound deadening. Personally I hear a difference when in the van my voice doesn’t echo as much and road noise isn’t as noticeable. It isn’t completely sound proof and may never be, but my insulation, walls and ceiling will help make it even more sound proof. So overall I see a difference, nothing too drastic though.
Great job!
Thank you!
Really interesting. Though, I suggest to use a utility knife instead of the cisors to cut the stripes more quickly. ;-) And your cisors will not be gummy 🙂
Hey, Chantal! A utility knife could definitely work but I didn’t mind using the scissors personally😄
Thanks for sharing‼️
Thanks for watching!
purposeful content 👍👍👍
gret job
creative and innovative
A channel worth supporting 💪💪💪💪💪
Advance steadily Lauren ✊✊✊✊✊
Thank you for your kind words, that means a lot☺️
you are the kindest
truly, thank you for content
I like your videos, very imformitive.
Thank you😊
I had to use gloves the metal was super sharp
Smart!
Now I know. Thx.
Quick question could you also use spay in bed liner in a can to have the same effect
To be honest, I have not done any research on this option so I don’t know the answer to that but would be curious to hear what you find out😊
So if you use the 3m thinsulate, do you do it in pieces like you have done, or do you cover all surfaces where it will be used for insulation also.
I cut individual pieces for 3M thinsulate so I can fill every cavity but still have access to the van supports to attach furring strips, run wires etc.
If you are referring to the sound deadening, you only need 25% coverage.
Hope this helps!
I am a new follower(nr:11101) of your channel Greetings from Türkiye.
Welcome!
Lauren......your kind heart,lovely face,intelligence and introspective mind.shamim zahuri from bangladesh💞🧚♀️🤝🎎🧑🍼
Good informative video to watch. Couldn't hear much,, all the sound was deadened. lol
Hahahaha that comment made my day. Thank you😁
For when you dont want the neighbors to hear you stirring macaroni salad
Exactly, you get it 😆
@@LaurenLawliss Get it girl
kilmat is more weight. All the things you have in your drawers will be what makes the most noise. I think you should kilmat the wheel well but its a waste of money to put it anywhere else. You could add one more 100A battery or a solar panel for the same amount of weight.
Thanks for the comment. Kilmat is up to personal preference. Some people swear by it, others may feel differently. Yes, it does add more weight, cost more money, and takes time, but it does result in a noticeable sound difference in the van. However, once you start adding insulation, floors, ceiling and cabinetry - that also helps to eliminate the sound of a metal box. So again, up to personal preference.
@@LaurenLawliss yes but personal preference is developed by what that persons learns
Putting in kilmat or not ain’t going to make or break a van build 😆
How many SF used to finish whole van?
I believe I said two in the video☺️
Just FYI, it's not "80 millimeter", it's "80 mil", where a "mil" is a thousandth of an inch. It's 80 thousandths thick.
Yes, I realize that 😆
How many in one package??
Too long ago for me to remember exactly, but 36 sq. ft. worth.
Just to clarify, it isn't 80mm, it's 80 mil. 1 mil is 1000th of an inch (an antiquated increment that only the US still uses). 80mm is around 3 inches. So that is a huge difference. I just don't want people searching the internet for the wrong thing. The US really needs to adopt the metric system, and catch up with the rest of the world.
Thank you for the clarification. Sorry I misspoke😊
Lauren, I see this is was posted 2 years ago. However, if you're not aware of this tool, put it in your bag of tricks for when you need it. I bought this for a carpet install I had and it's a game changer. Bonus points because it has so many uses around the house after the project. Be well.
ruclips.net/video/5MRXPJm6Iec/видео.html
Thanks for sharing!
no more updates?
More to come! Starting the slower parts of the build now. I hope to have a video next week🤗
nice projekt, u are cute :) greetz from germany
Thank you☺️
@@LaurenLawliss