Brilliant! I'm just starting can bus work on my 04 w211 m113k project car- I just wanted to thank you for being such a great resource and source of inspiration! Cheers from Los Angeles, CA!
hello to you, Bravo for your videos...!!! I come to you because I replaced the gearbox plate myself on my 722.6 slk R170 from 1997....and obviously impossible to access it the main computer afterwards. With a message P0730...Was it necessary to copy data from the old board?? Thank you for your help! However, if you work remotely I'm up for it?? THANKS
Hello friend i have a proble with a 722.6 transmission it neutralized in 10 minutes drive turned off I waited a few minutes and tried to make it work well i already repaired it changed everything do you think it's TCM could you help me i already bought TCM I need to reprogram
mbux port partially works with 210. I have connected only can_C so far. engine data is working. data 722.6 does not work (EGS51) or does not work completely (id 218) can_B didn’t connect because I don’t know what transceiver is needed there (fault tolerant or not)
@@RANDASH when I ordered 1.2 the new version was in development status. I waited for the board for about 50 days. lost them twice I don't need the result so much, I'm more interested in the process. I want to assemble this thing with my own hands. As they say, a samurai has no goal, a samurai has only a path))) additional input would be useful for the mode switch button standard, winter. I have no idea how to switch more than two modes it would be interesting to make the agility mode on w210 m112 egs51 prnd4321 will it be difficult to adapt the mbux port project for my car?
I want to be a tester please!, My car is a w203 220 cdi with paddle shift and M mode by xentry coding, I have available for your purposes two egs53 ecu's from CLC w203 220 cdi and 180K
Fantastic work. Love the gear box display on your head unit! Very clever.
This is a magnificent piece of engineering. All my respect for this work.
Guys if you want to be a tester, please fill the form out linked at the top of the description rather than commenting here!☺
Fantastic works but you should add a video about comparison of original and your modded egs
Brilliant! I'm just starting can bus work on my 04 w211 m113k project car- I just wanted to thank you for being such a great resource and source of inspiration! Cheers from Los Angeles, CA!
Love following your work
Amazing job !
This work is amazing! Why did i not find this before now?😆 I signed up for testing straight away! Can do some useful testing in my high power OM648👍👍
Fantastic work sir!
great work, i have a question tough, does the TCM have to be installed in a merc or can it be used as a standalone controller?
Amazing work!
hello to you, Bravo for your videos...!!!
I come to you because I replaced the gearbox plate myself on my 722.6 slk R170 from 1997....and obviously impossible to access it
the main computer afterwards. With a message P0730...Was it necessary to copy data from the old board?? Thank you for your help! However, if you work remotely I'm up for it?? THANKS
Very impressive
Hello friend i have a proble with a 722.6 transmission it neutralized in 10 minutes drive turned off I waited a few minutes and tried to make it work well i already repaired it changed everything do you think it's TCM could you help me i already bought TCM I need to reprogram
Hi 👋 😊 can you do it for 722.6 nag1 98 Mercedes Benz W202 c230 Kompressor?
Do you think it’s possible to retrofit a 9g tonic 4 matic in w204 c320cdi?
hi @RANDASH will your tcu work on the sprinter?
mbux port partially works with 210. I have connected only can_C so far. engine data is working. data 722.6 does not work (EGS51) or does not work completely (id 218)
can_B didn’t connect because I don’t know what transceiver is needed there (fault tolerant or not)
yes, on 210, the CAN C network is different, 211/203 gen uses a more detailed version of the 210 CAN network (More data added)
@@RANDASH in this case, I'm more concerned about voltage levels. in FT-can they are different.
It would be much appreciated if you can add ability to make this work in a non Benz model, current options are outrageously priced
I have plans for that....but not now
@@RANDASH it's insane what you've accomplished so far!👍🏽👍🏽 Will patiently wait
Will a 2002 Merc clk430. it has the 722.6 trans.
Yes
😊
Hi do u have W204 1.6kompressor year 2010 Tcm module?
How much intake boost pressure are you running?
1.6 bar
Do you want to test this on a x308 xjr?
yer form wer issit?
will the version with the screen with the 722.6 image be posted on github? time - 7:24
unfortunatly not, this required a LOAD of special changes specifically with my TCU and the HU code, its not really portable
@@RANDASH I ordered v 1.2 board from JLCPCB ;) and almost all components. When I have time I will solder and experiment with UltimateNAG
oh! There is V1.3 now btw! It has some additional IO and some minor circuitry improvements
@@RANDASH when I ordered 1.2 the new version was in development status. I waited for the board for about 50 days. lost them twice
I don't need the result so much, I'm more interested in the process. I want to assemble this thing with my own hands.
As they say, a samurai has no goal, a samurai has only a path)))
additional input would be useful for the mode switch button standard, winter. I have no idea how to switch more than two modes
it would be interesting to make the agility mode on w210 m112 egs51 prnd4321
will it be difficult to adapt the mbux port project for my car?
@@RANDASH no one will stop me from ordering 1.3
and by the time I get them you will make 1.4 with even more cool features
Ok, I want to be a tester
How can buy?
Any work for 722.9 ?
It's impossible. Tcm is inside the transmission!
@@RANDASH Do you can activate amg menu on ki203m cluster?
I want to be a tester please!, My car is a w203 220 cdi with paddle shift and M mode by xentry coding, I have available for your purposes two egs53 ecu's from CLC w203 220 cdi and 180K