That is epic! You have been a busy man building some crazy-flying Area 51 machines. 😂You should make a cheap bungee launcher so you can just focus on the control during launches. I made one for 20 bucks. I think Hobbyking still has the cheap bungee launch kits.
Black all the way. i'm so amazed at how much effort and time you dedicated to getting the Batwing right. Awesome job my friend. I WANT ONE DEFINITELY. i JUST FOUND YOUR CHANNEL AND IM HOOKED AND SUBSCRIBED TO YOU NOW. AWESOME!!!
Being the Bat Wing, black is or should be a no-brainer. I don't have a printer, and I haven't flown anything other than my Sport Cub, but I would love to have one even just to have it sitting on the shelf until I get better at flying.
Ok the elevator up for trimming is call "Reflex and is one of the main details of a wing during maiden because if the batwing do no have sufficient reflex in take off will meet the ground, now you got that baby dial now. I'm a Inav advance user so with Inav and auto takeoff this wing will be a dream.
Fantastic work as always, I can’t wait to get my hands on it, I always joke about asking the bank manager and how poor you are making me.. But for one the designs are just so good I just can’t help myself, and two the prices you charge on Cults is so dam reasonable..! In a world of $40+ for the files, your files are just priced so good, and you have made it more affordable for everyone. Thank you. Looking forward to getting the batwing and tearing up the Swedish skys. Hope a few guys make the model and get it out on RUclips to help promote you. !! 👌🏻
Thank you very much. I don’t understand the whole $30-$100 3d printable models. Most of them don’t even have clear video of them actually flying or flying well.
Hi, I try to build it with 6mm Depron. I have a drawing from the Batwing and scaled it up to a wingspan of 700mm. I have also a 64mm EDF in the stock. See you....
Would this be suitable for a novice flyer? I used to fly an e-flight Ultra Stick but crashed that miserably. I have all the parts which I can put into this - best of all I 3d print a lot. I'll do this in ABS or PETG. Does it have lift or is it just pure power keeping it in the air?
The batwing is definitely an intermediate jet. Yes it has an actual airfoil and it flies like an RC jet but also has flying wing characteristics so it’s definitely intermediate. It uses a 50mm EDF doesn’t the ultra stick have a propeller? Sorry I haven’t purchased many planes
@@hotlapkyle Ultrastick is prop. But since I can print as many as I need, I guess I can just keep crashing them until I get there. Buying on Cults now. We'll see how it goes. I've never printed an RC plane. Lots of other 3d models I've made in Fusion360. So cool! My goal - get good enough and FPV it.
so i just bought your stl file my son is going to print it out he has a bigger printer would you mind to share what printer you used and brand of filament please
@@hotlapkyle thanks bro:-)I think I know how to do that I'm using ender 3 Pro as my 3d printer and will print it in abs or petg matt black filement and had nav lights n rockets n 2x 50 cal cannons n 2x m134mini guns n design the claw at the front like my static bat wing.u did a fantastic job well done:-))
@@hotlapkyle thanks bro:-)I think I know how to do that I'm using ender 3 Pro as my 3d printer and will print it in abs or petg matt black filement and had nav lights n rockets n 2x 50 cal cannons n 2x m134mini guns n design the claw at the front like my static bat wing.u did a fantastic job well done:-))
So as cool as the 141 is, it has some issues for RC. Small narrow thin wings. And the tails in the rear will dig into the ground… any other planes? lol
Hi love your work I don't have a 3d printer and if I did wouldn't know how to use it will you sell and ship the batwing made I would pay whatever the price you put on it
Thank you so much. If you have the money I highly recommend getting a Bambu P1S. It makes the printing sooooo easy. I don’t think I’ll be printing and shipping them unfortunately as my printers are always running for new designs. Where do you live? I’m sure there are people that can print the whole thing for you locally
Joker, " Where does he get all those Toys! " ....
Nice job 👍
Amazing job, looking forward to the files being available. I’ll deffo be printing this awesome Batwing in the UK 😁🦇
That is epic! You have been a busy man building some crazy-flying Area 51 machines. 😂You should make a cheap bungee launcher so you can just focus on the control during launches. I made one for 20 bucks. I think Hobbyking still has the cheap bungee launch kits.
Working on it!
Caught myself smiling through the whole flight. Totally awesome looking!
Deff a cool plane. Seemed to handle well, and be agile. And it's the Bat Plane in black...
Black all the way. i'm so amazed at how much effort and time you dedicated to getting the Batwing right. Awesome job my friend. I WANT ONE DEFINITELY. i JUST FOUND YOUR CHANNEL AND IM HOOKED AND SUBSCRIBED TO YOU NOW. AWESOME!!!
Thank you!! I’ve been trying since 2009 think 😆
Where to buy
It was a perfect day to fly it with the sky colors and clouds popping out and disappearing when it wants to. Great job! Keep going.
Looks awesome! I wonder how a larger version would go
Great work!! Looks like you got it where you want it.
impressive!! 🤩 awesome job!!
I can't believe it works so well bravo!!!😮
looks really awesome in black, cool video & flight .......thumbs up👍👍
Being the Bat Wing, black is or should be a no-brainer. I don't have a printer, and I haven't flown anything other than my Sport Cub, but I would love to have one even just to have it sitting on the shelf until I get better at flying.
Ok the elevator up for trimming is call "Reflex and is one of the main details of a wing during maiden because if the batwing do no have sufficient reflex in take off will meet the ground, now you got that baby dial now. I'm a Inav advance user so with Inav and auto takeoff this wing will be a dream.
Very impressive model!! You could always mix down elevator with the throttle advance so it flies level.
Yes I forgot about that!! It will keep it level while applying reflex! Great idea thanks
that looks like fun!
Awesome content!!
Neat!!! Are plans and files available?
That beauty is pass cool. Need one
Yep. this one is on my short list of 3D planes to build
Fantastic work as always, I can’t wait to get my hands on it, I always joke about asking the bank manager and how poor you are making me.. But for one the designs are just so good I just can’t help myself, and two the prices you charge on Cults is so dam reasonable..! In a world of $40+ for the files, your files are just priced so good, and you have made it more affordable for everyone. Thank you.
Looking forward to getting the batwing and tearing up the Swedish skys. Hope a few guys make the model and get it out on RUclips to help promote you. !!
👌🏻
Thank you very much. I don’t understand the whole $30-$100 3d printable models. Most of them don’t even have clear video of them actually flying or flying well.
Nice in black.
AWESOME!
thats absolutely awesome 😎😎😎👌👌
Strat scaling it up. I want to see a full-scale model.
thanks .i bought the stl
❤💯
Hi, I try to build it with 6mm Depron. I have a drawing from the Batwing and scaled it up to a wingspan of 700mm. I have also a 64mm EDF in the stock. See you....
Very cool!! It needs some LEDS!
Cool idea!
@@hotlapkyle those LEDs will also help with orientation. And they'll look bad ass!!
Damnit! Now I've got to get a 3d printer!😅😊 Kin awesome dude.
Definitely do. If you need help setting up join my Facebook group
Nice job! would like to know the best way to connect☺
You sound like movies for adults when you are flying this thing 🤣
Hahahaha
Brilliant looking wee plane i built the fatty mirage but haven't maidened yet having problems with the cg do you cg it inverted?
No the bumps on the bottom of the wing are for balancing with your fingers. What issue are you having
what was your all up weight without any thing installed just the bat wing by its self
Cool factor. 100%
already printing it now and looks amazing so far
Thanks!
@@hotlapkyle taking a while bc im using my stanard pla settings and everything is coming out smooth as silk
@@edwinroper5458 you’re printing it in regular pla?
Yep
Just messing with it should still fly great
Where’s the link to buy the file? I love this and just need a printer! 😎
cults3d.com/:2017754
Would this be suitable for a novice flyer? I used to fly an e-flight Ultra Stick but crashed that miserably. I have all the parts which I can put into this - best of all I 3d print a lot. I'll do this in ABS or PETG. Does it have lift or is it just pure power keeping it in the air?
The batwing is definitely an intermediate jet. Yes it has an actual airfoil and it flies like an RC jet but also has flying wing characteristics so it’s definitely intermediate. It uses a 50mm EDF doesn’t the ultra stick have a propeller? Sorry I haven’t purchased many planes
@@hotlapkyle Ultrastick is prop. But since I can print as many as I need, I guess I can just keep crashing them until I get there. Buying on Cults now. We'll see how it goes. I've never printed an RC plane. Lots of other 3d models I've made in Fusion360. So cool! My goal - get good enough and FPV it.
Where I live, it's too hot for PLA. It would just deform almost instantly. ABS or PETG for me.
They sell Light weight material for 3d printers for 3d printing airplanes called LW-PLA
Hi there wot size print bed do you need for this
so i just bought your stl file my son is going to print it out he has a bigger printer would you mind to share what printer you used and brand of filament please
Awesome thanks! I use 3d lab print active foaming LW PLA. I also have two Bambu printers. One P1P and one p1s
I wonder if i can make this out of foam board?
Don't forget LED lights.
I just brought the files can't wait to print it but how do I downscale it to fit a 30mm EDF ??thanks
Awesome! Should be .6 or 60% if my math is right. You need to dig out some material for the servos
@@hotlapkyle thanks bro:-)I think I know how to do that I'm using ender 3 Pro as my 3d printer and will print it in abs or petg matt black filement and had nav lights n rockets n 2x 50 cal cannons n 2x m134mini guns n design the claw at the front like my static bat wing.u did a fantastic job well done:-))
@@hotlapkyle thanks bro:-)I think I know how to do that I'm using ender 3 Pro as my 3d printer and will print it in abs or petg matt black filement and had nav lights n rockets n 2x 50 cal cannons n 2x m134mini guns n design the claw at the front like my static bat wing.u did a fantastic job well done:-))
Time for full scale now that its proven to fly
Wouldn’t that be cool !
Waiting with bated breath
Yes cool
Your old kart is hitting the track tomorrow, I hope
Make and paint a blue angles f-18
Pleeeeaaaassseeeeee
Day 4 of asking for a Yak-141
So as cool as the 141 is, it has some issues for RC. Small narrow thin wings. And the tails in the rear will dig into the ground… any other planes? lol
Hi love your work I don't have a 3d printer and if I did wouldn't know how to use it will you sell and ship the batwing made I would pay whatever the price you put on it
Thank you so much. If you have the money I highly recommend getting a Bambu P1S. It makes the printing sooooo easy. I don’t think I’ll be printing and shipping them unfortunately as my printers are always running for new designs. Where do you live? I’m sure there are people that can print the whole thing for you locally
@@hotlapkyle I'm san diego ca