Brilliant demonstration I am very new to machine embroidery and I understood everything you demonstrated, I’m now off to make my two grand babies a onesie thank you x
It would have been easier if u had put the sticky stabilizer down on the hoop and placed the onies on top of it to float it instead inside the shirt. Also u should use a no show mesh Stablizer as well when working with tshirts which would have prevented the white thread from showing through as well as puckers. Hope that helped!
Sheshe thanks for the tip. I have no show mesh stabilizer and haven't used it yet. I need to unwrap this stabilizer and give it a try. I noticed I do have issues with puckering when using the other stabilizers. I didn't know the no show mesh would help with this. Thanks so much for the tip!!! Appreciate it!!!
Boricua Sewing & Crafts You are welcome. When doing stretches material like tshirts the no show mesh is what stop that believe me I watched and heard from the best out there. I myself just started about 4 months ago doing embroidery and have done the T-shirts as well with no issues because of the tutorials out there believe me they help. Good luck!
@sheshe's page So your saying use both stabilizers at the same time or 1 or the other? And have you used tender touch? A lot of people just use the stabilizer and that's it.
Hola yo ablo igles pero muchas personas les gustaria que icieras algunos videos an espanol.gracias por compartir tus cnocimietos I have se 624 machine.
Hi I use pins, my question is if you use sticky stabilizer why you also add kk2000? Fir my experience the best fir appliqué us the cutaway the finish is amazing
The KK200 spray is used to stick the shirt to the tear away stabilizer. I used two different stabilizers for the onesie because this one had material that was thin and easy moves. This provides more stability when embroidering. If the onesie is made of thicker fabric then you don't need two, you can only use one type.
How do you put the machine on appliqué so it will be in order to do the placement stitch and then go to the next stitch to hold the fabric I’m lost basically how do I put the machine to do placement first then tack down stitch
Hi Jamie, The applique embroidery file will have all the steps. The first stitch will be your placement stitch, next stitch is the tack down (this is where you cut the excess fabric) and then you will have the satin stitch. I have another video on appliques in my channel. That video might help!
Hi Sesima. I created the design using Embrillance Essentials software on my Mac. Once I had the design i just imported the file to the SE1900 using a USB.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Jeanette I’m watching all your videos. I love them all. Your skills have come so far. And I appreciate all the information you share Chika!
Thanks so much! Glad you are enjoying them!
Brilliant demonstration I am very new to machine embroidery and I understood everything you demonstrated, I’m now off to make my two grand babies a onesie thank you x
You’re welcome 😊
Glad to watch this video because I want to do the same thing for twin boys, will try and let you know how it came out.
It would have been easier if u had put the sticky stabilizer down on the hoop and placed the onies on top of it to float it instead inside the shirt. Also u should use a no show mesh Stablizer as well when working with tshirts which would have prevented the white thread from showing through as well as puckers. Hope that helped!
Sheshe thanks for the tip. I have no show mesh stabilizer and haven't used it yet. I need to unwrap this stabilizer and give it a try. I noticed I do have issues with puckering when using the other stabilizers. I didn't know the no show mesh would help with this. Thanks so much for the tip!!! Appreciate it!!!
Boricua Sewing & Crafts You are welcome. When doing stretches material like tshirts the no show mesh is what stop that believe me I watched and heard from the best out there. I myself just started about 4 months ago doing embroidery and have done the T-shirts as well with no issues because of the tutorials out there believe me they help. Good luck!
I need help as well can we connect #SE1900
@sheshe's page
So your saying use both stabilizers at the same time or 1 or the other? And have you used tender touch? A lot of people just use the stabilizer and that's it.
Hola yo ablo igles pero muchas personas les gustaria que icieras algunos videos an espanol.gracias por compartir tus cnocimietos I have se 624 machine.
Hi Gloria, I am working on some videos in spanish!
Hi
I use pins, my question is if you use sticky stabilizer why you also add kk2000? Fir my experience the best fir appliqué us the cutaway the finish is amazing
The KK200 spray is used to stick the shirt to the tear away stabilizer. I used two different stabilizers for the onesie because this one had material that was thin and easy moves. This provides more stability when embroidering. If the onesie is made of thicker fabric then you don't need two, you can only use one type.
I found that helps to use jersey needles on clothing
Thanks for the tip! I'm going to try this!
How do you put the machine on appliqué so it will be in order to do the placement stitch and then go to the next stitch to hold the fabric I’m lost basically how do I put the machine to do placement first then tack down stitch
Hi Jamie, The applique embroidery file will have all the steps. The first stitch will be your placement stitch, next stitch is the tack down (this is where you cut the excess fabric) and then you will have the satin stitch. I have another video on appliques in my channel. That video might help!
Can you change the stitch on an applique on the se1900
No. You will need the digitizer to modify the design of the file.
Hi joiner I buy el se to 1900 can I embroidery bacword I am from Puerto Rico I hope you can help
Hi! If you need to backstitch all you need to do is hit the button with the thread spook and + and - sign.
HOLA ME ENCANTARIA QUE HICIERAS VIDEOS DE COMO HACERLO PERO EN ESPAÑOL GRACIAS
I will work on it!
I believe it’s the tread u should only used embroidery tread
I did use embroidery thread for this project.
What software did u use for this ?
Hi Diam. The link to the software is in the video description.
I wish I saw how you apply the name.
Hi Sesima. I created the design using Embrillance Essentials software on my Mac. Once I had the design i just imported the file to the SE1900 using a USB.
Boricua Sewing & Crafts okay thanks for the information.
You used to big of a hoop, 4x4 for a onesie
Thanks for the advice. I'm going to try it with the 4x4. I bet will would be easier.